Specification 4 - CLIN 0004 Multi sort roll off NASWI.docx

Specification 4:

1. Multi-sort recycle collection roll-off

2. Container is not considered off the shelf but has been manufactured by a solid waste container manufacturing company already. This type of container is easily built by a solid waste container manufacturing company.

3. This specification is for Naval Air Station Whidbey Island (NASWI) Integrated Solid Waste Program (ISWP).

a. Ship to: 3485 N. Langley Blvd., Bldg 2555, Oak Harbor, WA 98278

b. Customer will offload containers from haulers trailer at location listed in 3.a

c. Hauler does not need to apply for an access card. NASWI ISWP will escort hauler from NASWI truck inspection gate. It is recommend that the vendor use a hauling company with TWIC drivers.

d. Vendor is required to coordinate delivery date with NASWI ISWP by contacting them at least a week in advance of delivery.

4. QTY 2

5. All drawings are not to scale. All pictures with dimensions are not to scale. Both are for reference.

6. Roll off containers will be built as a dual pick roll off container.

a. Stellar Hook-lift requirements

i. Made to fit and work on a Stellar Slider26 system.

ii. https://www.stellarindustries.com/download/StellarHookliftSpecBook.pdf

iii. Reference the Stellar Industries Spec Book from the link for reference information for the frame requirements of a roll off container to work on the Stellar Slider26 system.

iv. It is recommended that contractor also contacts Stellar Industries to ensure the hook and rail system will be built in accordance with Stellar Industries specification to work on their hook lift systems.

b. Endless Chain connection on the roll off container.

7. 25.75 cubic yard, 16 foot long x 92 inches wide – Five bay recycling roll off container.

a. Bay width, front to back, equals 64 inch.

b. Bay #1, #2, #3, #4 depth, side of roll off to center divider = 46 inches

c. Bay #5 depth, side to side of roll off = 92”

d. For reference see picture #P1, #P2 and #D1

e. Roll off will be made with 12 gauge material.

8. Interior bay dividing walls.

a. 1 center wall dividing bays #1, #2, #3 and #4. (Wall highlight in Red for reference, #D1)

b. 2 divider walls running from side to side dividing bays #1, #2, #3 and #4. (Walls highlighted in Orange for reference, #D1)

c. 1 divider wall running from side to side dividing bays #3, #4 and #5. (Wall highlighted in Orange for reference, #D1)

d. For reference see picture #D1FRONT OF ROLL OFF

BAY #1 – HOLDS A MATERIAL HANDLING CONTAINER. HAS GUIDE RAILS FOR THE CONTAINER.

BAY #3 – HOLDS A MATERIAL HANDLING CONTAINER. HAS GUIDE RAILS FOR THE CONTAINER.

BAY #2 – HOLDS A MATERIAL HANDLING CONTAINER. HAS GUIDE RAILS FOR THE CONTAINER.

BAY #4 – HOLDS A MATERIAL HANDLING CONTAINER. HAS GUIDE RAILS FOR THE CONTAINER.

BAY #5 – NO DIVIDER FOR THIS BAY. DUAL PURPOSE SECTION FOR OCC COLLECTION OR COLLECTION CONTAINER.

#D1

9. Three access doors on each side of the roll off for a total of 6 side doors.

a. Bay doors will be equal in size.

b. Quick release latches will be installed on the doors to keep the doors closed.

i. See picture #P2 for reference/example to the quick release latches. The contractor does not have to make latches exact match.

c. For reference see picture #P2 and #P3

10. Rear door of the roll off will be for dumping the 5th bay and will be a barn door style door.

a. T-handle latch/closing system to secure the doors closed. (See picture #P8 for reference)

b. Chains on each door to secure when fully open.

c. For reference see picture #P4, #P5 and #P8

11. The roll off will hold 4 square metal collection containers – not part of this specification.

a. For reference see pictures #P6 and #P7.

b. Bay #1, #2, #3 and #4 will have angle iron guide rails for the metal collection containers.

c. ID width between the angle iron guide rails will be 4 feet i.d.

d. Angle iron guide rails will be welded to the floor of the roll off and positioned to center the metal collection container in the bays #3 and #4. Bays #1 and #2 will be shifted to the rear of the bay to account for the dog house for the chain lift hook up.)

e. Angle iron guide rails will be 42 inches in length from the center bay divider to the access door. The last 2 inches of the angle iron guide rail will be at a 25 degree angle away from the center of the bay to help guide the metal collection container in-between the angle iron guide rails.

f. For reference see pictures #P9 (Currently owned containers in picture #P9 do not have the angled guide. This is a new requirement).

12. 1 push open door, gravity close, will be installed in bay doors #1, #2, #3 and #4 for a total for 4 doors at the measurements stated in 8.a.

a. Push open doors will be 20 inches tall x 26 inches wide.

b. Push doors will be centered on the access door of the bay and will be 54 inches from the ground to the bottom of the push door. Measurement is after the height of the front legs of the roll off container. See drawing D2 for visual example.

#D2 54”

c. Push doors to be hinged to push open smoothly and to easily shut using gravity.

13. 1 push open door, gravity close, will be installed in each door of bay #5 for a total of 2 doors at the measurement stated in 9.a.

a. Push open doors will be 20 inches tall x 41” wide.

b. Push doors will be centered on the access door of the bay and will be 54 inches from the ground to the bottom of the push door. Measurement is after the height of the front legs of the roll off container. See drawing #D2 for visual example.

c. Push doors to be hinged to push open smoothly and to easily shut using gravity.

14. For all push doors reference pictures P#3, P#4 and P#6. Each push door is slanted in. Requirement is to help direct material to go into the interior collection container. Recommend bidding vendor to ask for additional pictures if needed.

15. Solid Weld on roof.

a. Roof will cover the roll off bays and extend out over the sides by 2.5 inches on each side.

b. Roof to have a 2 inch peak.

16. Primer/Paint of container

a. Interior and exterior rust inhibitor primer – 2 coats

b. Exterior Rust inhibitor paint – 2 coats – color = safety orange

c. Meet all State and Federal Regulation regarding proper reflective markings.

d. All containers will be dry before shipping.

e. All containers will be loaded on trailer for shipment to avoid damage during transportation.

f. White block vinyl letter, weather and heat resistant, on each side of the container:

i. Wording - “NASWI ISWM 360-257-5481” (see drawing #D4 for example. Example not to scale and is only an example of the lettering for the container)

ii. Wording to be space equally across both sides of the container to be read from left to right when look at the wording.

#D4

NASWI

iswm 360-257-5481 image5.jpeg image6.jpeg image7.jpeg image8.jpeg image1.jpeg image2.jpeg image3.jpeg image4.jpeg