Specification 1 - CLIN 0001 40 yard roll off NBK.docx

Specification 1:

1. 40 cubic yard rectanglar structual roll off container that is a made for a Stellar hooklift.

2. Container is considered off the shelf and is a standard build for solid waste container manufacturers.

3. This specification is for Naval Base Kitsap Bangor Integrated Solid Waste Program (ISWP).

a. Ship to: 1460 Silversides Road, Silverdale WA 98315

b. Customer will offload containers from haulers trailer at location listed in 3.a

c. Hauler does not need to apply for an access card. NBK ISWP will escort hauler from NBK Bangor truck inspection gate. It is recommend that the vendor use a hauling company with TWIC drivers.

i. Vendor is required to coordinate delivery date with NBK ISWP by contacting them at least a week in advance of delivery.

4. All pictures are representation and used to help discribe requirement. Companies final may product may vary but meet the requirement the picture and write up is identifying. All drawings are not to scale.

5. QTY 29

a. Stellar Hook-lift requirements

i. Made to fit and work on a Stellar Slider65 system

ii. https://www.stellarindustries.com/download/StellarHookliftSpecBook.pdf

iii. Pages 81 through 100 of the Stellar Industries Spec Book provide information for the frame requirements of a roll off container to work on the Stellar Slider65 system.

iv. It is recommended that contractor also contacts Stellar Industries to ensure the hook and rail system will be built in accordance with Stellar Industries specification to work on their hook lift systems.

b. Single rear door with heavy duty hinges and basic stick on rubber gasket to make leak resident. Water proof is not required for this container.

i. Passenger Side hinged.

c. Reversible lid with crank winch and pulley system to lift lid.

i. Made with light weight steel frame and tin sheeting.

ii. Four lid hinges, round tubing, two on each side, one forward and one aft.

1. Lid hinge pin to be beveled on one side with a chain welded to other side of pin. See Picture 1.

2. Four each Pin holder, tube, welded to each corner of the container to stow pin when not in use. See Picture 2.

iii. Cable Mount for cable that is used to lift the lid using the winch will be solid or braced as to not bend under pressure from the winch. Cable pulley will be able to swivel so the cable does not have to be removed from the cable pulley. Equal to or equivalent to picture 3. See picture 3.

iv. Winch recommended or equivalent – Dutton Lainson B2500 Brake Winch.

d. Primer/Paint of container

i. Interior and exterior rust inhibitor primer – 2 coats

ii. Exterior Rust inhibitor paint – 2 coats – color = safety orange

iii. Will have all State and Federal Regulated reflective markings.

iv. All container will be dry before shipping.

v. All containers will be loaded on trailer in such a way to avoid damage during transportation.

image1.JPG image2.JPG image3.JPG