Specification 3 - CLIN 0003 Boeing Scrap Box.docx

Specification 3:

Example of what is currently in stock. New containers will be Blue.

1. 4x4x3 “Boeing Box” Recycle material collection container.

2. Container is not considered off the shelf but it is a basic material recovery facility collection container to store recycle material with the ability to stack the containers or nest them.

3. This Specification is for Naval Base Kitsap Bangor, Naval Air Station Whidbey Island and Naval Station Everett.

a. Quantity and Ship to address:

i. Qty 10

1. Ship these containers to 1460 Silversides Rd, Silverdale, WA 98315.

ii. Qty 8

1. Ship these containers to 3485 N. Langley Blvd., Bldg 2555, Oak Harbor, WA 98278

iii. Qty 12

1. Ship these containers to 2000 West Marine View Dr, Bldg. 2331, Everett, WA 98207

b. Customer will offload containers from haulers trailer at locations listed in 3.a.

c. Hauler does not need to apply for an access card at NBK and NASWI. NBK and NASWI ISW will escort hauler from NBK Bangor/NASWI truck inspection gate. It is recommend that the vendor use a hauling company with TWIC drivers. Delivery to NSE ISW will be required to apply for a BAVR base access card. Instructions can be found at the bottome of this specification.

i. Vendor is required to coordinate delivery date with each location independantly.

1. NBK 360-396-7005 at least a week in advance of delivery.

2. NASWI 360-257-5481 at least a week in advance of delivery.

3. NSE 425-304-3071 at least a week in advance of delivery.

d. These containers can be loaded in the bigger containers of Specification Items #1 and #4 for the Quantities listed in 3.a. of this specification. Vendor will ensure containers are loaded in such a manner as to not cause damage to this container or the container it is loaded into during transportation.

4. Container must be able to stack/nestle in each other (DRAWINGS ARE NOT TO SCALE)

a. Legs on one box fit in the top of another box. (Also see picture “Example of what is currently in stock”).

i. No more than ¼” play when stacking.

Top container Side veiw Bottom container Side View Top container Front veiw

¼” gap

Bottom container Front View

5.

Size of the container: (DRAWINGS ARE NOT TO SCALE)

a. I.D. = 4’ wide x 4’deep x 3’ high4 feet 3 feet 4 feet 3 feet Front View – example drawing – not to scale Side View – example drawing – not to scale

6. Floor and Side walls made from 12 gauge steel and made structurally sound.

7. Fork pockets on the inside floor of the container

a. Fork pocket size = 4 inch tall x 8 inch wide, 3/16” tubing or formed steel.

b. Fork pockets centered 20” from middle of the container.

c. Fork pockets = 4’ 2 ½” length

d. Fork pockets will sit on the lip of the container it is nestled in

e. Fork pockets to extend past the side wall by 1.5 inches on each side 4 feet 3 feet 4 feet 3 feet Front View showing fork pockets – example drawing – not to scale Side View showing fork pocket– example drawing – not to scale

20” OC

8. Legs

a. 1” x 4” tubing or formed steel

b. Length = 47 ½ “

c. Legs welded to bottom measuring ¼ inches from the outer edge of the side

d. Legs are for stacking in another box and each box will be tested by manufacturing company to ensure that they stack and they are not to snug of a fit

e. Slight adjustment in the placement of the legs to make a snug fit is allowable Bottom View – example drawing – not to scale ¼“ spacing ¼“ spacing ¼“ spacing ¼“ spacing ¼“ spacing ¼“ spacing 47 ½ “

9. Primer and Paint

a. Rust inhibiting primer – two coats – color to meet paint color requirements – interior and exterior

b. Rust inhibiting paint – two coats – color = Recycle Blue – exterior and interior.

c. All containers will have dry paint before shipping.

d. All containers will be loaded on trailer for shipment to avoid damage during transportation.

BAVR Base Access Card Request Instructions:

Request a Pacific DBIDS via Badge Authorization Visit Request (BAVR) system. Begin by accessing BAVR at: https://www.bavr.cnic.navy.mil Completion Instructions:

Complete the form in the BAVR system ensuring all the blocks in Red are filled in. The following items in “RED” are the required items. Some blocks are filled in with what you should use in those fields.

Last Name:

First Name:

Height (in inches):

Weight:

Gender:

Hair Color:

Eye Color:

Date of Birth:

SSN:

Place of Birth:

Citizenship:

Email:

Alien Registration Number:

Driver's License Information:

Driver's License # or N/A:

State Issued:

Home Information:

Home Address:

City:

Country:

State:

Home Phone:

ZIP:

Work Information:

Personnel Type: Commercial Driver Command You Are Visiting: Naval Air Station Whidbey Island (NASWI) Bldg. 3485, Naval Base Everett (NSE) Bldg. 2555 Company Name or Command: (insert your company name) Work Phone:

Sponsor Information: steven.e.chavez3.civ@us.navy.mil; phillip.a.saurer.civ@us.navy.mil Request information:

Purpose of Visit: Commercial Driver will be dropping off solid waste containers at the ISWM for (company name) as requested by ISWM programs located at NASWI Bldg. 3485, NSE Bldg. 2331. These containers are being delivered per DLA contract (insert contract #).

Start Date (mm/dd/yyyy) (Use the first day of planned delivery) End Date (mm/dd/yyyy) (Make the end date for the last day of planned delivery)

ISWM representatives will be able to assist with the form as needed.

image1.jpeg