Attachment_1_Amendment_0001.pdf

Attachment 1

*Reference below to Amendment 0001 Note #5

52.216-9069-ECONOMIC PRICE ADJUSTMENT- PUBLISHED MARKET PRICE -

DOMESTIC BULK (NOV 2011) – DLAD

I II III IV V

Item No. Name of Publication

Heading under which Location where market price is applicable

Base market price as of Nov. 15, 2016 (excludes all taxes) (see note(s) below) market indicator is published and name of product

OFFSHORE/WEST

COAST PLATT’S OILGRAM

PRICE REPORT

SPOT PRICE

ASSESSMENT

WEST COAST

PIPELINE JET

FUEL

LOS ANGELES

SAN FRANCISCO

SEATTLE

$1.395020

JP5/JP8/JAA/JA1

The reference price shall be determined as follows: LOS ANGELES + SAN FRANCISCO + SEATTLE

Note: Adjusting contract prices using this escalator will be firm for weekly periods and is defined as the average of the applicable daily spot assessment quotations effective for the prior week. The simple average of the daily average highs and lows of the prices effective Monday through Friday (excluding any days prices are not published) shall be the adjusted contract price effective for the following Tuesday through Monday.

WEST COAST ARGUS US GLOBAL SPOT JET

MARKET PRICES

FUEL FOB

LOS ANGELES

SAN FRANCISCO $1.386870

JP5/JP8/JAA/JA1 PRODUCTS

NOTE: Offers based on the Argus market price indicator will be subject to an adjustment factor of - $0.006520 for evaluation purposes only. This evaluation factor represents the spread between the difference of the two reference prices and the 12-month averages of both market price indicators.

Note: Adjusting contract prices using this escalator will be firm for weekly periods and is defined as the average of the applicable daily spot assessment quotations effective for the prior week. The simple average of the daily average highs and lows of the prices effective Monday through Friday (excluding any days prices are not published) shall be the adjusted contract price effective for the following

The reference prices shall be determined as follows: LOS ANGELES + SAN FRANCISCO

OFFSHORE WEST

COAST F76

PLATT’S OILGRAM

PRICE REPORT

SPOT PRICE

ASSESSMENT

WEST COAST

PIPELINE ULTRA

LOW SULFUR

(*EPA) DIESEL/

SPOT PRICE

ASSESSMENT

NORTHWEST

ULTRA LOW

SULFUR

LOS ANGELES

SAN FRANCISCO

SEATTLE $1.501787

(*EPA) *Environmental Protection Agency The reference price shall be determined as follows: LOS ANGELES + SAN FRANCICSO + SEATTLE

Note: Adjusting contract prices using this escalator will be firm for weekly periods and is defined as the average of the applicable daily spot assessment quotations effective for the prior week. The simple average of the daily average highs and lows of the prices effective Monday through Friday (excluding any days prices are not published) shall be the adjusted contract price effective for the following

ROCKY MOUNTAIN PLATT’S OILGRAM

PRICE REPORT

JET KERO 54

PIPELINE U.S. GULF COAST $1.315520

JP8/JAA

The reference price shall be determined as follows: 100% U.S. Gulf Coast Pipeline (Average of Low and High)

Note: Adjusting contract prices using this escalator will be firm for weekly periods and is defined as the average of the applicable daily spot assessment quotations effective for the prior week. The simple average of the daily average highs and lows of the prices effective Monday through Friday (excluding any days prices are not published) shall be the adjusted contract price effective for the following

*Reference below to Amendment 0001 Note #7

52.212-1 Instructions to Offerors -- Commercial Items (BULK) (TAILORED) (DLA

ENERGY) (JUN 2013)

(a) NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE AND SMALL BUSINESS SIZE STANDARD. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees. Per Small Business Administration(SBA) for NAICS code 324110, “To qualify as small for purposes of Government procurement, the petroleum refiner, including its affiliates, must be a concern that has either no more than 1,500 employees or no more than 200,000 barrels per calendar day total Operable Atmospheric Crude Oil Distillation capacity.”

(b) SUBMISSION OF OFFERS. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt;

(3) The name, address, and telephone, and facsimile number of the offeror (and electronic address if available);

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) “Remit to” address, if different from mailing address;

(8) A completed copy of the representations and certifications in the certification package. See FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically;

(9) Acknowledgment of solicitation amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation.

Offers that fail to furnish required representations or information, or that reject the terms and conditions of the solicitation may be excluded from consideration.

(12) All price, quantity, delivery, and transportation terms as specified in the Offeror Submission Package.

(c) All technically acceptable and responsible offerors will be evaluated in accordance with FAR

52.212-2 EVALUATION – COMMERCIAL ITEMS (OCT 2014).

A technically acceptable offer is one that meets the Government’s product requirements in Section B, specifications in Section C, quality assurance requirements in Section E, and delivery requirements in Section F. An offer that proposes an exception to one of the foregoing requirements will be reviewed to determine whether the fuel will meet the Government’s specification and delivery requirements, can physically be accepted, and not compromise fuel quality. If so, an offer containing the exception will also be technically acceptable. The offeror must demonstrate its understanding of the quality assurance requirements in E1 and/or E1.21 of the solicitation and provide evidence of an acceptable inspection system via the submission and acceptance of the supporting documentation required under Section E of the Offeror Submission Package (OSP).

(d) FACSIMILE OFFERS Yes (FAR 52.215-5). Incorporated by reference. No

(e) PERIOD FOR ACCEPTANCE OF OFFERS. The offeror agrees to hold the prices in its offer firm for _180___ calendar days from the date specified for receipt of offers.

(f) PRODUCT SAMPLES. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing.

(g) LATE SUBMISSIONS, MODIFICATIONS, REVISIONS, AND WITHDRAWALS

OF OFFERS.

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2) (i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for offers, it was the only offer received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn at any time before award. Withdrawals are effective upon receipt of notice by the Contracting Officer.

(h) CONTRACT AWARD.

The Government may evaluate offers and award a contract after conducting discussions with offerors whose offers have been determined to be within the competitive range.

If the Contracting Officer determines that the number of offers that would otherwise be in the competitive range exceeds the number at which an efficient competition can be conducted, the Contracting Officer may limit the number of offers in the competitive range to the greatest number that will permit an efficient competition among the most highly rated offers. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. While the Government intends to evaluate offers and award a contract after oral or written discussions with offerors, it reserves the right not to conduct discussions, as determined by the Contracting Officer.

(i) MULTIPLE AWARDS. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit cost or prices offered, unless the offeror specifies otherwise in the offer.

(j) AVAILABILITY OF REQUIREMENTS DOCUMENTS CITED IN THE

SOLICITATION.

(1) (i) The GSA Index of Federal Specifications, Standards, and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--

GSA FEDERAL SUPPLY SERVICE SPECIFICATIONS SECTION

470 EAST L’ENFANT PLAZA SW, SUITE 8100

WASHINGTON DC 20407

TELEPHONE: (202) 619-8925

FAX: (202) 619-8978

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (http://assist.daps.dla.mil).

(ii) Quick Search (http://assist.daps.dla.mil/quicksearch).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by—

(i) Using the ASSIST Shopping Wizard (http://assist.daps.dla.mil/wizard);

(ii) Phoning the DoDSSP Customer Service Desk at (215) 697-2179, Monday through Friday, 0730 to 1600 EST; or

(iii) Ordering from--

DEPARTMENT OF DEFENSE SINGLE STOCK POINT (DoDSSP)

BUILDING 4, SECTION D

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5094

TELEPHONE: (215) 697-2667/2179

FAX: (215) 697-1462

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

http://assist.daps.dla.mil/ http://assist.daps.dla.mil/quicksearch http://assistdocs.com/ http://assist.daps.dla.mil/wizard

(k) DATA UNIVERSAL NUMBERING SYSTEM (DUNS) NUMBER. (Applies to offers exceeding $3,000 and offers of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "DUNS" or “DUNS+4” followed by the DUNS or DUNS+4 number that identifies the offeror's name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. An offeror within the United States may contact Dun and Bradstreet by calling 1-866-705- 5711 or via the internet at http://fedgov.dnb.com/webform. An offeror located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The offeror should indicate that it is an offeror for a Government contract when contacting the local Dun and Bradstreet office.

(l) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.

Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.

(m) DEBRIEFING. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency’s evaluation of the significant weak or deficient factors in the debriefed offeror’s offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award.

(5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

http://fedgov.dnb.com/webform https://www.acquisition.gov/

*Reference below to Amendment 0001 Note #8

52.212-2 EVALUATION -- COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award one or more contracts resulting from this solicitation to the responsible offeror(s) whose offer(s) conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

FACTOR 1: TECHNICAL ACCEPTABILITY

The following subfactors, which are equal in importance, will be used in determining technical acceptability:

SUBFACTOR

1. Supplies or services and prices/cost, Section B

2. Description/specifications/statement of work, Section C

3. Inspection and acceptance, Section E

4. Deliveries or performance, Section F

Subfactors 1 – 4 will be rated either “Acceptable” or “Unacceptable.” These ratings are defined as follows:

ACCEPTABLE: The offeror’s proposal conforms to the Government’s supply and schedule requirements in Section B, product specifications in Section C, product quality assurance in Section E, and delivery/transportation requirements in Section F.

UNACCEPTABLE: The offeror’s proposal does not conform to any one or more of the following requirements: the Government’s supply and schedule requirements in Section B, product specifications in Section C, product quality assurance in Section E, and delivery/transportation requirements in Section F.

Proposals may be comprised of individual, independent offers, differentiated by product grade, shipping mode and/or FOB point. An individual offer within a proposal may be rated “Unacceptable”, while remaining offers within the same proposal may be rated “Acceptable.” A rating will be made for each individual offer within each proposal.

Each individual offer within a proposal must receive an “Acceptable” rating for every subfactor in order to be rated technically acceptable. If an individual offer within a proposal receives a rating of “Unacceptable” for one subfactor it will be rated technically unacceptable. Therefore, some individual offers within a proposal may be considered technically acceptable while other individual offers within the same proposal may be considered technically unacceptable.

An offeror that proposes an exception to any of the requirements of the solicitation, as related to the aforementioned subfactors, will be reviewed to determine whether the fuel will meet the Government’s specification and delivery requirements, can physically be accepted, and not compromise fuel quality. If so, an offer containing the exception will also be technically acceptable. Programmatic exceptions are addressed to all offerors via amendment. Likewise, a rating may be made “Acceptable” if an offeror corrects, or the Government accepts by reason of exception, any subfactors previously rated “Unacceptable” by the Source Selection Evaluation Board (SSEB).

All offerors will have the opportunity to make revisions to submitted proposals during negotiations and to submit a final proposal revision unless the offeror should choose to withdraw before the time final proposal revisions are required.

FACTOR 2: PRICE

Fixed Price with Economic Price Adjustment (EPA) contracts will result from this solicitation.

The Contract Team will evaluate proposals for pricing purposes in accordance with FAR 52.212- 2 – EVALUATION – COMMERCIAL ITEMS. Offerors are advised that DLA Energy intends to execute the extension provision of any subsequent contract only if there are remaining quantities left on the contract; no quantities will be added. The extension provision will only extend the ordering and delivery period of the contract. In addition, the extension provisions contained in contract provision I209.09 EXTENSION PROVISIONS (DLA ENERGY JAN 2012) will be evaluated in conjunction with the evaluation of initial offers received.

The lowest price is defined as the lowest laid-down price, to include transportation costs as determined by the Bid Evaluation Model (BEM), which will provide the basis to make awards.

The BEM is a computer evaluation model which analyzes numerous variables. These variables include the offeror’s proposed prices, fuel types, minimum and maximum award quantities, shipping locations, shipment mode capabilities, minimum and maximum cargo sizes, customer receipt locations, and receipt mode capabilities. Transportation rates will be included for tanker, barge, pipeline, railcar, and tank truck transportation modes in accordance with M41.04

EVALUATION OF OFFERS INVOLVING OTHER THAN F.O.B. TANKER (BULK) (DLA

ENERGY JUL 2010) and M24.02 EVALUATION OF OFFERS INVOLVING F.O.B. TANKER

LOADING FOR THE ROCKY MOUNTAIN/WEST COAST/OFFSHORE PURCHASE

PROGRAM (DLA ENERGY SEP 2010). Government additive costs will be used to evaluate, where applicable, proposals of product not fully additized at the loading facility, but instead are additized/injected en route to a facility or customer location. The BEM will calculate the overall pattern of delivery of fuel from contractor facilities to specific customer locations that represents the lowest total combination of price for product, transportation and other costs.

Offers will be submitted through the Offer Entry Tool (OET). There are two types of OET instances or “rounds” that are available for use during the solicitation process – the “Standard” round and the “Reverse Auction” (RA) round. A standard round is used for all offer inputs from initial offers on the solicitation through Final Proposal Revisions (FPR). In a standard OET round, the vendor can change most data fields in their offer, including adding and removing shipping locations, adding or removing origin and destination bid lines, quantities, prices, and offer conditions.

After the solicitation has been posted to the Federal Business Opportunities (FedBizOpps) website, it will be posted to the OET as the initial standard round. Please note that there can be multiple standard rounds. All initial offers must be submitted via this OET standard round no later than the date and time specified for the receipt of initial offers. Only those offers who have submitted an initial offer by the date and time specified will be eligible to submit data in later OET rounds.

DLA Energy will request offeror submission of Interim Proposal Revisions (IPRs) before the conclusion of negotiations. IPRs will be submitted through the OET and considered a standard round. The information in the OET will be evaluated in the BEM. Each offeror will be provided with a “Minimum Cost Bid Evaluation Worksheet” (MCBEW). The MCBEW will provide detailed information on how an offer is evaluated to each demand location. This report includes product price, method of delivery for each leg of the route, transportation and additive costs, any applicable evaluation factors, and the evaluated laid in price for each location. This information will be generated separately for each offeror, and each offeror will receive only the information applicable to their offer.

Offerors will be given time to review the MCBEW, after which DLA Energy will close negotiations and call for Final Proposal Revisions (FPRs). FPRs will be submitted through the OET and considered a standard round. FPRs will be evaluated in the BEM. If an offeror chooses not to revise its offer during the FPR standard round, then unless the offer is withdrawn, the offeror must still re-submit its previously entered OET information to be evaluated as a final offer in the BEM for possible award. The Government reserves the right either to make awards based on the FPR BEM evaluation, or to conduct one or more additional standard or RA rounds in OET.

At the start of each RA round, offerors will be provided with an updated copy of the MCBEW.

At this time, offerors will also be provided with a “Laid-Down Cost Report” (LCR). The LCR will provide information on the price currently in line for award at each demand location. This report is limited to providing the solicitation line item, location, quantity currently in line for award, and the laid in price for the quantity currently in line for award. The laid in price is an aggregate of product, additive and transportation costs, as well as any evaluation factor(s). No information concerning apparently successful offer, shipping point, or product routing is included.

In contrast to a standard round, in an RA round an offeror is only allowed to lower their offered price, and may not make revisions to any other OET fields. All other OET fields, including product type, shipping location, quantity, conditions, etc., will be locked during an RA round.

During an RA round, the offeror is responsible for ensuring that the “offered price” field for each submitted offer line contains the offer price they wish to have evaluated. The price in the “offered price” field can be equal to or lower than the previously offered price (shown in the field directly to the left of the offer price field in OET). As with the standard rounds, offerors are responsible for submitting revisions before the stated closing date and time for the RA round.

Revisions received after the stated closing date and time will not be considered, and, unless withdrawn, the offer will be evaluated using the final offered price that was submitted prior to the stated closing date and time.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

*Reference below to Amendment Note #9

52.212-4 CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS (BULK)

(TAILORED) (DLA ENERGY) (JUL 2013)

(a) INSPECTION/ACCEPTANCE. See FAR Clause 52.246-2 & Contract Provision E14.02.

(b) ASSIGNMENT. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Government-wide commercial purchase card), the Contractor may not assign its right to receive payment under this contract.

(c) CHANGES. Changes in the terms and conditions of this contract may be made

(1) mutual agreement of the parties, or (2) unilateral modification in accordance with FAR 52.243-1.

(d) DISPUTES. This contract is subject to the Contract Disputes Act of 1978, as amended (41 U.S.C. 601-613). Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, DISPUTES, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) DEFINITIONS. The clause at FAR 52.202-1, DEFINITIONS, is incorporated herein by reference.

(f) EXCUSABLE DELAYS. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence, such as acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) INVOICE.

(1)The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include--

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, contract line item number, and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price, and extended price of the items delivered;

(v) Shipping number and date of shipment including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any prompt payment discount offered;

(vii) Name and address of official to whom payment is to be sent; and

(viii) Name, title, and phone number of person to be notified in event of defective invoice.

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer – Central Contractor Registration, or 52.232- 34, Payment by Electronic Funds Transfer – Other Than Central Contractor Registration), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

(h) PATENT INDEMNITY. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. NOTE: Contractors are also required to provide additional information in their invoices as specified in the Addendum and the SUPPLEMENTAL INVOICING INFORMATION (BULK) contract provision.

(i) PAYMENT.

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C 3903) and prompt payment regulations at 5 CFR part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purposes of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall--

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the--

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected contract line item number or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in Section 611 of the Contract Disputes Act of 1978 (Public Law 95-563), which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period at fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if—

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on—

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in 32.608-2 of the Federal Acquisition Regulation in effect on the date of this contract.

(j) RISK OF LOSS. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon--

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) TAXES. Please see FAR 52.229-6 & solicitation provisions I28.01, I28.02-1, I28.03-1, I28.24, and K86.

(l) TERMINATION FOR THE GOVERNMENT'S CONVENIENCE. The Government reserves the right to terminate this contract, or any part thereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) TERMINATION FOR CAUSE. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) TITLE. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) WARRANTY. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p) LIMITATION OF LIABILITY. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) OTHER COMPLIANCES. The Contractor shall comply with all applicable Federal, State, and local laws, executive orders, rules, and regulations applicable to its performance under this contract.

(r) COMPLIANCE WITH LAWS UNIQUE TO GOVERNMENT CONTRACTS.

The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. 3701 et seq., Contract Work Hours and Safety Standards Act; 41 U.S.C. 51- 58, Anti- Kickback Act of 1986, 41 U.S.C. 265 and 10 U.S.C. 2409 relating to whistle blower protections; 49 U.S.C. 40118, Fly American; and 41 U.S.C. 423 relating to procurement integrity.

(s) ORDER OF PRECEDENCE. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Assignments; Disputes; Payments; Invoices; Other Compliances; and Compliance with Laws Unique to Government Contracts paragraphs of this clause.

(3) The clause at 52.212-5.

(4) Addenda to this solicitation or contract, including any license agreements for computer software.

(5) Solicitation provisions if this is a solicitation.

(6) Other paragraphs of this clause.

(7) Standard Form 1449.

(8) Other documents, exhibits, and attachments; and.

(9) The specification.

(t) System for Award Management (SAM). Offerors and Contractors may obtain information on registration and annual confirmation requirements via SAM accessed through https://www.acquisition.gov.

https://www.acquisition.gov/

*Reference below to Amendment Note #10

I190.04 SAFETY DATA SHEETS -- COMMERCIAL ITEMS (DLA ENERGY JUL 2016)

(a) For each item to be delivered under this contract, the apparently successful offeror shall submit, prior to award, a Safety Data Sheet (SDS), NOT a Material Safety Data Sheet (MSDS), that meets the requirements of both 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313. All data on the SDS shall be current, accurate, complete, and in compliance with Federal Standard No. 313. The apparently successful offeror is responsible for satisfying this requirement whether or not it is the actual manufacturer of the item. Failure to submit an SDS for each item to be delivered prior to award may result in the apparently successful offeror being considered non-responsible and ineligible for award.

(b) All SDSs shall be submitted to the Contracting Officer. Each SDS must cite the solicitation or contract number, the applicable Commercial and Government Entity (CAGE) code of the Contractor and the name of the manufacturer, and the National Stock Number (NSN).

(c) For current contracts, the apparently successful offeror need not submit an SDS for an item for which they have submitted an acceptable SDS to DLA Energy within the past four years. At minimum, a new SDS must be prepared, dated, and submitted every four years.

(d) If, at any time prior to or after award, there is either a change in the composition of the item(s) or a revision to Federal Standard No. 313 that renders incomplete or inaccurate the data submitted under paragraph (a) of this contract text, the apparently successful offeror or Contractor shall promptly notify the Contracting Officer and submit a new SDS that is complete and accurate within 30 days of said change or revision.