Attachment A - Medical Gas Program Vendor Submission Form (v3).xlsx
XLSX spreadsheet 25 KB Posted
- Attached to
- Defense Logistics Agency (DLA) Troop Support Medical Gas Electronic Catalog (ECAT) Program
- Solicitation number
- SPE2DH-23-R-0002
About this file
This document is an attachment titled "Medical Gas Program Vendor Submission Form" related to a federal contract solicitation for the Defense Logistics Agency (DLA) Troop Support Medical Gas Electronic Catalog (ECAT) Program. The document outlines the minimum requirements and solicitation objectives for vendors providing cylinder-compressed and bulk medical gases, including oxygen, nitrogen, carbon dioxide, and other gases. Key requirements include offering specific types and purities of medical gases, providing a variety of cylinder sizes, maintaining certifications and registrations, and demonstrating the ability to provide full regional coverage and supply chain continuity. The document also includes optional objectives related to providing dry ice, tiered sourcing, and sustainment of existing equipment. The overall solicitation is seeking to establish a contract to support medical gas requirements at Medical Treatment Facilities (MTFs) and Dental Treatment Facilities (DTFs) located in the Continental United States, Alaska, Hawaii, and Puerto Rico.
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
BASIC REQUIREMENTS & CERTS
| MEDICAL GAS PROGRAM VENDOR SUBMISSION FORM (v3) | ||||||
| GOVERNMENT MINIMUM REQUIREMENTS | VENDOR MUST COMPLETE ALL INFORMATION IN COLUMNS D, E, F, G, H, and I | Government Evaluation **VENDOR INPUT NOT REQUIRED UNDER THESE COLUMNS** | Governemnt Evaluation **VENDOR INPUT NOT REQUIRED UNDER THESE COLUMNS** | |||
| Vendor Certifies if Meets Minimum, Does Not Meet Minimum, or N/A (N/A Only Relevant if No Minimum Requirement) | Vendor Certifies if Meets Solicitation Objective, Does Not Meet Objective, or N/A (N/A Only Relevant if No Solicitation Objective) | Narrative on how vendor meets minimum requirement or solicitation objective (NOTE: Vendor must provide narrative for every minimum requirement and/or solicitation objectvie for this document to be considered complete) | Indicate where in the vendors offer the minimum requirement is supported. Vendor MUST reference specific page number on quote or technical data. |
FILE LOCATION: Specify the folder that the referenced file is in (if applicable) (i.e.: folder "Supporting Documentaton 1 of 5") FILE NAME/TYPE: Specify the exact file name being referenced (i.e.: "Brochure.pdf") PAGE/TAB NAME: Specify the exact page number/excel tab where the information is located
| (i.e.: "Page 47" or "Tab B" (if excel)) | Vendor Can Provide Comments And/Or Explanation Relating to Not Meeting a Requirement(s) | GOVERNEMNT ASSESSMENT OF WHETHER VENDOR MEETS REQUIREMENT, BASED ON REVIEWED SUPPORTING DOCUMENTATION | GOVERNEMNT ASSESSMENT OF WHETHER VENDOR MEETS OBJECTIVE, BASED ON REVIEWED SUPPORTING DOCUMENTATION | GOVERNMENT NARRATIVE OF ASSESSMENT FINDINGS | SUPPORTING INFORMATION LOCATION: Indicate where in the vendors offer the minimum requirement or objective is supported | Government Comments/Questions | GOVERNEMNT ASSESSMENT OF WHETHER VENDOR MEETS REQUIREMENT, BASED ON REVIEWED SUPPORTING DOCUMENTATION | GOVERNEMNT ASSESSMENT OF WHETHER VENDOR MEETS OBJECTIVE, BASED ON REVIEWED SUPPORTING DOCUMENTATION | GOVERNMENT NARRATIVE OF ASSESSMENT FINDINGS | SUPPORTING INFORMATION LOCATION: Indicate where in the vendors offer the minimum requirement or objective is supported | Government Comments/Questions | ||||
| Minimum Requirement # | DESCRIPTION OF MINIMUM REQUIREMENT AND/OR OBJECTIVE | MINIMUM REQUIREMENT | VENDOR CERTIFICATION OF MINIMUM REQUIREMENT | VENDOR CERTIFICATION OF SOLICITATION OBJECTIVE | VENDOR NARRATIVE SUPPORTING THEIR CERTIFCATION | FILE LOCATION | FILE NAME/TYPE | PAGE/TAB NAME | COMMENTS AND/OR EXPLANATION OF WHY MINIMUM CANNOT BE MET | FILE NAME/TYPE: Specify the exact file name and page number being referenced | |||||
| (ie: "Pg. 41 of Brocure.pdf) | FILE NAME/TYPE: Specify the exact file name and page number being referenced |
(ie: "Pg. 41 of Brocure.pdf)
| B1 | Medical Gas Type (Cylinder) | Vendors are required to offer cylinder compressed medical gases, which must include of all of the following gases: Medical Liquid Oxygen (USP), Medical Gaseous Oxygen (USP), Medical Liquid Nitrogen (NF), Medical Compressed Nitrogen (NF), Medical Carbon Dioxide (USP), Medical Nitrous Oxide (USP), Medical Gaseous Helium (USP), Medical Liquid Helium (USP), Argon, Hydrogen, Medical Grade Air (USP) and Compressed Air. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| B1 | Dry Ice - No Minimum Requirement (Objective Only) | Vendors that are capable of offering dry ice (solid carbon dioxide) in either rice, pellets, and/or blocks to any of the identified minimum required facilities (Reference Solicitation Appendix B – Government Facility Regional Locations) shall be assigned a strength in the evaluation. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| B2 | Medical Gas Purity (Cylinder) | Vendors are required to offer each of the below patient medical gases at corresponding purities that are equal to or greater than those provided below: Medical Liquid Oxygen (USP) - 99.00% |
Medical Gaseous Oxygen (USP) - 99.00% Medical Liquid Nitrogen (NF) - 99.00% Medical Compressed Nitrogen (NF) - 99.00% Medical Carbon Dioxide (USP) - 99.00% Medical Nitrous Oxide (USP) - 97.00% NOTE: Any of the required patient medical gases outlined under minimum requirement B1 that are not specifically included under minimum requirement B2 (Purity) do not have a specific purity requirement and shall default to purity that conform to all applicable regulatory standards and the best recognized commercial practices.
| [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | ||||||||
| B3a | Medical Gas Cylinder Sizes (Cylinder - Non-liquid) | Vendors are required to offer variety of medical gas cylinder sizes for each of the required non-liquid medical gases specified under minimum requirement B1, which must be offered in all of the sizes specified under solicitation Section IV. Statement of Work, sub-section F. CONTRACT MINIMUM REQUIREMENTS, minimum requirement B3a. NOTE: Although cylinder sizes are often standardized among industry, any vendor that does not utilize the specified cylinder size scheme/metric must instead provide their closest alternative, in terms of capacity (Liters/Cubic Ft.), which overall must still equal the required number of various cylinder sizes (e.g., no more than nine (9) cylinder sizes for gaseous oxygen, etc.,) AND must fall within range of the identified allowable deviation of its specified equivalent (i.e., within +/- 25 liter deviation range for cylinder size A / M4, etc.). | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |||||
| B3b | Medical Gas Cylinder Sizes (Cylinder - Liquid) | Vendors are required to offer variety of medical gas cylinder sizes for each of the required liquid medical gases specified under minimum requirement B1, which must be offered in all of the sizes specified under solicitation Section IV. Statement of Work, sub-section F. CONTRACT MINIMUM REQUIREMENTS, minimum requirement B3b. NOTE: Although cylinder sizes are often standardized among industry, any vendor that does not utilize the specified cylinder size scheme/metric must instead provide their closest alternative, in terms of capacity (Liters), which overall must still equal the required number of various cylinder sizes (e.g., no more than four (4) cylinder sizes for liquid oxygen, etc.,) AND must fall within range of the identified allowable deviation of its specified equivalent (i.e., within +/- 10 liter deviation range for cylinder size 160L, etc.). | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |||||
| B4 | Medical Gas Type (Bulk Gas) | Vendors are required to offer medical gases (for existing bulk tank usage), which must include all of the following gases: Medical Liquid Oxygen (USP) & Medical Liquid Nitrogen (NF). | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |||||
| B5 | Medical Gas Purity (Bulk Gas) | Vendors are required to offer each of the below medical gases (for existing bulk tank usage) at corresponding purities that are equal to or greater than those provided below: Medical Liquid Oxygen (USP) - 99.00% | |||||||||||
| Medical Liquid Nitrogen - 99.00% | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |||||||
| C1 | Certification Required (Cylinder) | As it relates to medical gas cylinders, the vendor must certify that they will maintain all documentation certifying the purity of the compressed gas being supplied to each Government facility. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |||||
| C2 | Certification Required (Bulk Gas) | As it relates to bulk medical gases, the vendor must certify they will provide a Certificate of Purity documenting the concentration for each bulk medical gas delivery. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |||||
| C3 | Certification Required (Both Cylinder and Bulk Gas) | As it realtes to both cylinder compressed and bulk patient medical gases, the vendor must certify that they will only offer patient medical gases that conform to the most recent specifications prescribed in the United States Pharmacopoeia (USP) and the National Formulary (NF), including standards that address quality, strength, purity, packaging, labeling, and identification, throughout the life of any resultant contract. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |||||
| C4 | Certification Required (Both Cylinder and Bulk Gas) | The vendor must certify that they (the distributor - if other than manufacturer), medical gas manufacturer, and vendor personnel that are the fillers of medical gases shall be registered with the U.S. Food and Drug Administration and all patient medical gases shall be manufactured, processed, packaged, transported, and stored according to the FDA’s Current Good Manufacturing Practice (CGMP) regulations and Title 21, Code of Federal Regulations (CFR), Parts 201, 210, 211, and 820 throughout the life of any resultant contract. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
SUSTAINMENT & SUPPORT
| MEDICAL GAS PROGRAM VENDOR SUBMISSION FORM (v3) | ||||||
| GOVERNMENT MINIMUM REQUIREMENTS | VENDOR MUST COMPLETE ALL INFORMATION IN COLUMNS D, E, F, G, H, and I | Government Evaluation **VENDOR INPUT NOT REQUIRED UNDER THESE COLUMNS** | Government Evaluation **VENDOR INPUT NOT REQUIRED UNDER THESE COLUMNS** | |||
| Vendor Certifies if Meets Minimum, Does Not Meet Minimum, or N/A (N/A Only Relevant to Regional Support) | Vendor Certifies if Meets Objective, Does Not Meet Objective, or N/A (N/A Only Relevant to Regional Support) | Narrative on how vendor meets minimum requirement or solicitation objective (NOTE: Vendor must provide narrative for every minimum requirement or solicitation objective for this document to be considered complete) | Indicate where in the vendors offer the minimum requirement is supported. Vendor MUST reference specific page number on quote or technical data. |
FILE LOCATION: Specify the folder that the referenced file is in (if applicable) (i.e.: folder "Supporting Documentaton 1 of 5") FILE NAME/TYPE: Specify the exact file name being referenced (i.e.: "Brochure.pdf") PAGE/TAB NAME: Specify the exact page number/excel tab where the information is located
| (i.e.: "Page 47" or "Tab B" (if excel)) | Vendor Can Provide Comments And/Or Explanation Relating to Not Meeting a Requirement(s) | GOVERNEMNT ASSESSMENT OF WHETHER VENDOR MEETS REQUIREMENT, BASED ON REVIEWED SUPPORTING DOCUMENTATION | GOVERNEMNT ASSESSMENT OF WHETHER VENDOR MEETS OBJECTIVE, BASED ON REVIEWED SUPPORTING DOCUMENTATION | GOVERNMENT NARRATIVE OF ASSESSMENT FINDINGS | SUPPORTING INFORMATION LOCATION: Indicate where in the vendors offer the minimum requirement or objective is supported | Government Comments/Questions | GOVERNEMNT ASSESSMENT OF WHETHER VENDOR MEETS REQUIREMENT, BASED ON REVIEWED SUPPORTING DOCUMENTATION | GOVERNEMNT ASSESSMENT OF WHETHER VENDOR MEETS OBJECTIVE, BASED ON REVIEWED SUPPORTING DOCUMENTATION | GOVERNMENT NARRATIVE OF ASSESSMENT FINDINGS | SUPPORTING INFORMATION LOCATION: Indicate where in the vendors offer the minimum requirement or objective is supported | Government Comments/Questions | ||||
| Minimum Requirement # | DESCRIPTION OF MINIMUM REQUIREMENT AND/OR OBJECTIVE | MINIMUM REQUIREMENT | VENDOR CERTIFICATION OF MINIMUM REQUIREMENT | VENDOR CERTIFICATION OF SOLICITATION OBJECTIVE | VENDOR NARRATIVE SUPPORTING THEIR CERTIFCATION | FILE LOCATION | FILE NAME/TYPE | PAGE/TAB NAME | COMMENTS AND/OR EXPLANATION OF WHY MINIMUM CANNOT BE MET | FILE NAME/TYPE: Specify the exact file name and page number being referenced | |||||
| (ie: "Pg. 41 of Brocure.pdf) | FILE NAME/TYPE: Specify the exact file name and page number being referenced |
(ie: "Pg. 41 of Brocure.pdf)
| S1 | Support Region(s) | As outlined in Section IV. STATEMENT OF WORK; sub-section E. PROGRAM REGIONAL STRUCTURE, of this solicitation, geographical coverage is broken out by region. A vendor submitting to compete on any (or several/all) of the regions, either as the Primary Vendor and/or Back-Up Vendor must be able to provide coverage, at a minimum, to all of the specified individual Government facilities (Reference Appendix B – Government Facility Regional Locations) under that particular region. In order to be eligible for award of a region, the vendor must be able to provide full support (see definition below), either as the Primary Vendor or Back-Up Vendor, to at least one (1) of the twelve (12) regions specified in sub-section E. of this solicitation. “Full Support” is defined as medical gas support, via medical gas cylinders and bulk medical gas, to all specified individual Government facilities under that corresponding region. Vendors must provide some form of supporting documentation (i.e., supplier agreements, state licenses, location of nearby ASU locations, etc.) to substantiate location support capability of any regions they are submitting a proposal to provide support to. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| (i.) Pacific Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (ii.) Mountain Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (iii.) West North Central Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (iv.) East North Central Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (v.) Mid-Atlantic Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (vi.) New England Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (vii.) West South Central Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (viii.) East South Central Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (ix.) South Atlantic Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (x.) Alaskan Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (xi.) Hawaiian Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| (xii.) Puerto Rico Region | Vendor is able to support all specified Government facilities included under this region. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | |
| S1 | Extended Support - No Minimum Requirement (Objective Only) | A vendor shall be considered to have met this objective if the vendor is capable of providing support to any additional facilities/locations beyond what is required under Minimum Requirement S1 and/or is capable of providing support to all major/densely populated areas (where the majority of ordering under this program is expected to occur) within each of the individual locations (i.e., states) that make up a region and/or any/all geographic locations (i.e., any/all zip codes within a particular region(s). If a vendor is claiming to be able to meet this objective, the vendor is required to specify the extent of additional support capable of being provided within its Attachment A submission and Support Plan (further discussed under Section V. SOLICITATION PROVISIONS, sub-section B.), in addition to providing some form of supporting documentation (i.e., supplier agreements, state licenses, location of nearby ASU locations, etc.) to support this claim. Any vendor that is determined to meet any of the criteria specified under this objective will be assigned a strength in the evaluation. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| S2 | Continuity of Supply | As it relates specifically to medical gas cylinders, whether a manufacturer or a distributor of manufacturer-specific products, the vendor must provide consistent material to the individual facilities under that particular region it supports. Consistent material, as it relates to medical gas cylinders, is defined as cylinders on site that are all owned by the same supplier. Vendors may provide medical gas cylinder support via the use of multiple suppliers in order to support the region as a whole. However, continuity of supply must be maintained among each of the individual facilities within the awarded region(s) throughout the life of any resultant contract. Under normal circumstances, facilities will not manage and/or track and/or store the cylinders (assets) of multiple suppliers. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| S2a | Tiered Cylinder Sourcing - No Minimum Requirement (Objective Only) ***THIS OBJECTIVE IS ONLY APPLICABLE TO THE BACK-UP VENDOR ROLE*** | As it relates specifically to medical gas cylinder support of the Back-Up Vendor, vendors that are capable of sourcing different manufacturer-specific product (i.e., medical gas cylinders) from multiple suppliers/manufacturers, will be assigned as strength in the evaluation. Vendors capable of meeting this objective shall provide their primary and secondary and/or tertiary sources of medical gas cylinders within its Attachment C – Medical Gas Program Support Matrix submission, in addition to providing some form of supporting documentation (i.e., supplier agreements) to support this claim. Furthermore, in order to be considered as meeting this objective, vendors must be able to source the product from each of the multiple sources in a manner consistent with the above Minimum Requirement S2, where continuity of supply is able to be maintained. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| S2b | Tiered Bulk Sourcing - No Minimum Requirement (Objective Only) ***THIS OBJECTIVE IS ONLY APPLICABLE TO THE BACK-UP VENDOR ROLE*** | As it relates specifically to bulk medical gas support of the Back-Up Vendor, vendors that are capable of sourcing different manufacturer-specific product (i.e., bulk gas) from multiple suppliers/manufacturers, will be assigned as strength in the evaluation. Vendors capable of meeting this objective shall provide their primary and secondary and/or tertiary sources of bulk medical gas within its Attachment C – Medical Gas Program Support Matrix submission, in addition to providing some form of supporting documentation (i.e., supplier agreements) to support this claim. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| S3 | Cylinder Requalification | The cylinder requalification process, including inspection, hydrostatic testing, cylinder marking, and physical reconditioning, shall be conducted in accordance with the guidance provided within “Attachment D – DHA Procedures Manual for Medical Gases” and the most recent U.S. Food and Drug Administration (FDA) Good Manufacturing Practice for Medical Gases. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| S3a | Sustainment of Existing Cylinders - No Minimum Requirement (Objective Only) | In very rare situations and only if requested in writing by the Contracting Officer, the Back-Up Vendor may be required to provide support by utilizing (refilling) the Primary Vendor medical gas cylinders, including refilling cylinders and performing any required maintenance of those cylinders. Prior to the Back-Up Vendor utilizing the Primary Vendors medical gas cylinders, written consent and agreement would need to be obtained from the Primary Vendor (if the Primary Vendor is willing to provide this consent) authorizing use and maintenance of their medical gas cylinders. Although the Primary Vendor and Back-Up Vendor are not required to provide this consent and agreeance for these very rare situations, doing so (by meeting this objective) would be assigned as a strength in the evaluation. Any distributor of covered products that claims it can meet this objective must provide a letter from the manufacturer(s) within its proposal submission that states this authorization would be granted in such situations. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| S3b | Sustainment of Existing Bulk Tanks - No Minimum Requirement (Objective Only) | In very rare situations and only if requested in writing by the Contracting Officer, the Back-Up Vendor may be required to provide support by utilizing (refilling) the Primary Vendor bulk medical gas tank, including refilling the tank(s) and performing any required corresponding maintenance. Prior to the Back-Up Vendor refilling the Primary Vendors medical gas tank, written consent and agreement would need to be obtained from the Primary Vendor (if the Primary Vendor is willing to provide this consent) authorizing use and any corresponding maintenance of their bulk medical gas tank. Although the Primary Vendor and Back-Up Vendor are not required to provide this consent and agreeance for these very rare situations, doing so (by meeting this objective) would be assigned as a strength in the evaluation. Any distributor of covered products that claims it can meet this objective must provide a letter from the manufacturer(s) within its proposal submission that states this authorization would be granted in such situations. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| C5 | Certification Required | As it relates to any region(s) proposing to provide support to, vendors must provide certification that they possess all of the licensing and/or certifications and/or insurance required by federal, state, and local laws and regulations to manufacture (if applicable) and/or distribute medical gases per the terms of this solicitation and in accordance with the best recognized commercial practices. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| C5 | No Minimum Requirement (Objective Only) | In accordance with FAR 52.228-5, prior to performing under the resultant contract vendors must notify the Contracting Officer in writing that the required insurance has been obtained. Vendors who currently have insurance coverage for the region(s) that they are submitting a proposal to provide medical gas related support to may provide a copy of this insurance within their proposal submission. Furthermore, vendors who currently have coverage relating to the distribution of medical gases, particularly those with stronger coverage, shall be assessed as a strength in the evaluation. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
| C6 | Certification Required | The vendor must certify that it can and will meet all of the requirements specified within Attachment D – DHA Procedures Manual for Medical Gases, with the exception of the cylinder color coding (i.e., painting, striping, and stenciling) requirements identified on pg. 31, paragraph 5 of the document. In place of this exception, cylinders shall be color coded in accordance with CGA Publication C-9 – Standard Color Marking of Compressed Gas Containers Intended for Medical Use, dated September 2013. | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] | [SELECT] |
File details come from the government source that posted it. Updated .