RFP SP3300-12-R-0034 Final.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30 1000002915

1. REQUISITION NUMBER

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

SP3300-12-R-0034

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

David Gilson PNNAB52

a. NAME

Phone: 717-770-4496

b. TELEPHONE NUMBER (No Collect calls)

2012 JUL 25

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY CODE SP3300

DLA DISTRIBUTION

OFFICE OF PROCUREMENT - EBS

2001 MISSION DRIVE

NEW CUMBERLAND PA 17070-5000

USA

10. THIS ACQUISITION IS

UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

EMERGING SMALL

BUSINESS

8 (A)

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS

NAICS:

500SIZE STANDARD:

11. DELIVERYFOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

PAS: None

17a. CONTRACTOR/ CODE

OFFEROR

FACILITY

CODE

TELEPHONE NO.

18a. PAYMENT WILL BE MADE BY CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

See Schedule

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or Print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or Print) 31c. DATE SIGNED

SEE SCHEDULE

7. FOR SOLICITATION

INFORMATION CALL:

SEE SCHEDULE

142PAGE 1 OF

12:00 PM

STANDARD FORM 1449 (REV. 3/2005)

Prescribed by GSA - FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE ADDENDUM

32a. QUANTITY IN COLUMN 21 HAS BEEN

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:RECEIVED INSPECTED

COMPLETE PARTIAL FINAL

STANDARD FORM 1449 (REV. 3/2005) BACK

36. PAYMENT

PARTIAL FINAL

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42b. RECEIVED AT (Location)

CONTINUED ON NEXT PAGE

GENERAL OVERVIEW

NOTE: The following project description is for the purpose of general information and is not intended to include and describe every feature of the requirement or to define the Statement of Work.

This Request for Proposal (RFP) is for a Fixed Price Requirements contract to provide printer consumables of various types and sizes, consisting of printer ribbons, labels, cleaning cards and bond paper to various DLA Distribution Sites.

SMALL BUSINESS SUBCONTRACTING PLAN

The requirement for a Small Business Subcontracting plan has been waived for this acquisition.

PERIOD OF PERFORMANCE

The period of performance will be for one (1) year with two (2) option years as follows:

Base Year: 1 September 2012 – 31 August 2013 Option Year One: 1 September 2013 – 31 August 2014 Option Year Two: 1 September 2014 – 31 August 2015

DELIVERY LOCATIONS:

All delivery locations will be CONUS; all OCONUS delivery locations will utilize CONUS consolidated shipping points.

PROPOSAL DUE DATE, TIME, LOCATION

The proposal is due on 25 July, 2012, at 12:00 PM EST. THE PROPOSAL MAY BE SUBMITTED ELECTRONICALLY. THE PROPOSAL SHALL BE SUBMITTED TO THE FOLLOWING ADDRESS: DLA Distribution Attn: David Gilson Building 404; Avenue J New Cumberland, PA 17070 or; via email at - david.gilson@dla.mil

NOTE: The Government is not soliciting for the “same old way” of doing business. The Government encourages proposals that will achieve savings through innovative processes. Furthermore, DLA Distribution personnel are working to eliminate unnecessary requirements and negotiating for a reduction in supplies/material prices. Therefore, your assistance is requested in reducing prices and improving our buying processes.

REVERSE AUCTION:

Government reserves the right to conduct discussions if determined necessary by the contracting officer and anticipate using reverse auctioning techniques if determined to be in the best interest of the Government during discussions. Offerors are encouraged to visit the commercial reverse auction service provider's website at https://service.ariba.com/Supplier.aw to register and access the training tutorials.

ORDER PLACING AUTHORITY:

ORDERS UNDER THE MICR PURCHASE THRESHOLD ($3,000.00): Technical customers, who have the Government Purchase Card (GPC) (VISA), can place orders under the micro purchase threshold for a not to exceed (NTE) amount of $3,000.00 for supplies. No written delivery order will be issued by a warranted contracting officer unless unique circumstances exist for orders that fall under the threshold.

ORDERS ESCEEDING THE MICRO PURCHASE THRESHOLD (OVER $3,000): Orders that exceed the micro purchase threshold shall be placed by a warranted contracting officer from DLA Distribution J7-AB Contracting Office. Upon shipment of the supplies on the written delivery order, the Contractor shall contact the Acquisition

PAGE 3 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SP3300-12-R-0034

Specialist who issued the written/verbal delivery order. Payment for supplies delivered under the written/verbal delivery order will be made by the Contracting Officer via the GPC VISA.

NOTE: Since all payments under this contract will be made via the Government Purchase Card, the Contractor must accept the Visa Credit Card for Payment of all supplies ordered under this contract.

PAGE 4 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLIES/SERVICES: 7510-N00000718

ITEM DESCRIPTION:

FIRST ARTICLE TEST - CONTRACT AWARDEE WILL BE REQUIRED TO PROVIDE SAMPLES FOR FIRST ARTICLE TESTING WITHIN TWO (2) WEEKS OF CONTRACT AWARD IN ACCORDANCE WITH ATTACHMENT 1 (55 Rolls and 60 Labels) - SEE CLAUSE 52.209-4

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 7510-N00000718 55 RO Line item not $ ________________ FIRST ARTICLE separately priced

TESTING (FAT)

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

SUPPLIES/SERVICES: 7510-N00000718

ITEM DESCRIPTION:

Ribbon, Intermec P/N 12234118 or equal. Ribbon must be 4 inches wide or greater but no greater than 4.25 inches. Ribbon must be 18000 inches long with no greater than 48 inches (+/-) variation in length. Ribbon must meet the applicable salient requirements for the applicable ribbon type in the attached salient characteristics document. Ribbon must be designed to work with paper with laminate the same as or equal to Intermec DuraTran II. Ribbon wax and resin designed to work successfully as a Thermal Transfer ribbon on an Intermec PM4i or PD42 label printer. Material composite of the ribbon must be same as or equal to Intermec ThermaMax 2200 ribbon.

0002 7510-N00000718 14,000 RO $ ________________ $ ________________

Ribbon Intermec 12334118

PRICING TERMS: Firm Fixed Price

PAGE 5 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7510-N00000718 CONT'D

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 1000002915 0001 N/A N/A N/A N/A 0002 N/A N/A N/A N/A N/A N/A

SUPPLIES/SERVICES: 7510-N00000763

ITEM DESCRIPTION:

Ribbon, Intermec P/N 11034118 or equal. Ribbon must be 4 inches wide or greater but no greater than 4.25 inches. Ribbon must be 18000 inches long with no greater than 48 inches (+/-) variation in length. Ribbon must meet applicable salient requirements (ribbon) in the attached salient characteristics document. Ribbon must be designed to work with paper with laminate the same as or equal to Intermec DuraTran II. Ribbon of wax designed to work successfully as a Thermal Transfer ribbon on an Intermec PM4i or PD42 label printer. Material composite of the ribbon must be same as or equal to Intermec ThermaMAX 1500 ribbon.

0003 7510-N00000763 60,000 RO $ ________________ $ ________________

11034118

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 6 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7510-N00000763 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0003 1000002915 0002 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7510-N00000886

ITEM DESCRIPTION:

Ribbon, Intermec P/N 12084106 or equal. Ribbon must be 4 inches wide or greater but no greater than 4.25 inches. Ribbon must be a 6000 inches long to successfully mount on an Intermec 3400 series printer with no greater than 48 inches (+/-) variation in length. Ribbon must meet applicable salient requirements for ribbon in the attached salient characteristics document. Ribbon must be designed to work with paper with laminate the same as or equal to Intermec DuraTran II. Ribbon of wax and resin designed to work successfully as a Thermal Transfer ribbon on an Intermec 3400 label printer. Material composite of the ribbon must be same as or equal to Intermec ThermaMax 2200 ribbon or better.

0004 7510-N00000886 5,000 CAR $ ________________ $ ________________

12084106

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 7 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7510-N00000886 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0004 1000002915 0003 N/A N/A 751000L880266 N/A

SUPPLIES/SERVICES: 8115-N00001445

ITEM DESCRIPTION:

Ribbon, Intermec P/N 13634118 or equal. Ribbon must be 4 inches wide or greater but no greater than 4.25 inches. Ribbon must be a minimum of 18036 inches long with no greater than 48 inches (+/-) in variance. Ribbon must meet applicable salient requirements for applicable ribbon in the attached salient characteristics document. Ribbon must be able to produce significant print high quality legibility on a PM4i or PD42G printer using a GLOSS POLYESTER or advanced material construction label and be designed to work successfully with a DuraTran II GLOSS Polyester label same as or equal to Intermec E23068. Ribbon must be constructed as a full resin ribbon same as or equal to Intermec ThermaMAX 3202. Ribbon of full resin construction, approximately four (4) in wide (across the throat). Ribbon is made of resin designed to work successfully as a Thermal Transfer ribbon on an Intermec PM4i or PD42 label printer. Material composite of the ribbon must be same as or equal to Intermec ThermaMax 3202 ribbon and produce a higher quality print. Designed to be used with and print successfully a Gloss Polyester label such as Intermec E02368.

0005 8115-N00001445 400 RO $ ________________ $ ________________

13634118

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 8 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7510-N00001548 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0005 1000002915 0004 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7510-N00001548

ITEM DESCRIPTION:

Ribbon, Intermec P/N 12064118 or equal. Ribbon must be 4 inches wide or greater but no greater than 4.25 inches. Ribbon must be 18000 inches long to successfully mount on an Intermec 4420 or 4440 series printer with no greater than 48 inches (+/-) variation. Ribbon must meet the applicable salient requirements for ribbon in the attached salient characteristics document and be designed to work with paper with laminate the same as or equal to Intermec DuraTran II. Ribbon wax and resin designed to work successfully as a Thermal Transfer ribbon on an Intermec 4420 or 4440 label printer. Material composite of the ribbon must be same as or equal to Intermec ThermaMax 2200 ribbon or better.

0006 7510-N00001548 408 RO $ ________________ $ ________________

12064118

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 9 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000660 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0006 1000002915 0005 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00000660

ITEM DESCRIPTION:

Label, Intermec P/N E06175 or equal. Thermal Transfer label stocks in 4 wide X6 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics (label). Perforation on the backing or substrate between labels is required. Not less than 979 labels per roll.

0007 7530-N00000660 65,000 RO $ ________________ $ ________________

Label Intermec 4x6 E06175

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 10 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000893 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0007 1000002915 0006 N/A N/A 7530014542127 N/A

SUPPLIES/SERVICES: 7530-N00000893

ITEM DESCRIPTION:

Label, Intermec P/N E23068 or equal. Thermal transfer label in 3 inches wide by 1 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Label is constructed of same as or equal to specially treated DuraTran II GLOSS POLYESTER and is construction same as or equal to Intermec E02368 and defined as a GLOSS POLYESTER. Label may also be of similar advanced material that provides significant moisture and abrasion resistance and superior adhesion. Label must also meet the attached requirements for salient characteristics for labels. Label must be designed to work with same as or equal to Intermec full resin ribbon such as Intermec ThermaMax 3202 or as in Intermec 13634118. Perforation on the backing or substrate between labels is required. Not less than 5333 labels per roll.

0008 7530-N00000893 400 RO $ ________________ $ ________________

Label Intermec 3x1 E23068

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 11 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001550 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0008 1000002915 0007 N/A N/A 7530013475209 N/A

SUPPLIES/SERVICES: 7530-N00001550

ITEM DESCRIPTION:

Label, Intermec P/N E02202 or equal. Thermal transfer label in 3 inches wide by 1 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated polyester or advanced high durability material same as or equal to Intermec DuraTran II - Kimdura with significant adhesion, and significant moisture and tear resistance. Label must be designed to work with same as or equal to Intermec full resin ribbon such as Intermec ThermaMax 2200. Label must meet the attached requirements for salient characteristics for labels. Perforation on the backing or substrate between labels is NOT required. Not less than 4888 labels per roll.

0009 7530-N00001550 200 RO $ ________________ $ ________________

E02202

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 12 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001613 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0009 1000002915 0008 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00001613

ITEM DESCRIPTION:

Label, Intermec P/N E06172 or equal (Perforation is not required or expected). Thermal transfer label in 3 inches wide by 1 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. Perforation on the backing or substrate between labels is NOT required. Not less than 5333 labels per roll.

0010 7530-N00001613 50 RO $ ________________ $ ________________

E06172 - no perf

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 13 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000890 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0010 1000002915 0009 N/A N/A 753000L040159 N/A

SUPPLIES/SERVICES: 7530-N00000890

ITEM DESCRIPTION:

Label, Intermec P/N E06172 or equal (Perforation is required). Thermal transfer label in 3 inches wide by 1 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. Perforation on the backing or substrate between labels is required. Minimum of 5333 per roll.

0011 7530-N00000890 45 RO $ ________________ $ ________________

E06172

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 14 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000892 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0011 1000002915 0010 N/A N/A 753000L040159 N/A

SUPPLIES/SERVICES: 7530-N00000892

ITEM DESCRIPTION:

Label, Intermec P/N E09285 or equal. Thermal transfer label in 3 inches wide by 3 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. Perforation on the backing or substrate between labels is required. Not less than 1920 labels per roll.

0012 7530-N00000892 1,025 RO $ ________________ $ ________________

Label Intermec 3x3 E09285

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 15 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001607 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0012 1000002915 0011 N/A N/A 753000L000078 N/A

SUPPLIES/SERVICES: 7530-N00001607

ITEM DESCRIPTION:

Label, Intermec P/N E07516 or equal. Thermal transfer label in 4 inches wide by 2 designed to work successfully on an Intermec PM4i or PD42 label printer. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax ribbon and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristic for labels. Perforation on the backing or substrate between labels is required. Not less than 2823 labels per roll.

0013 7530-N00001607 160 RO $ ________________ $ ________________

Label Intermec 4x2 E07516

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 16 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001608 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0013 1000002915 0012 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00001608

ITEM DESCRIPTION:

Label, Intermec P/N E15132 or equal. Thermal transfer label in 4 inches wide by ~2 ½ (2.5) designed to work successfully on an Intermec PM4i or PD42 label printer. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. Perforation on the backing or substrate between labels is required. Not less than 2285 labels per roll.

0014 7530-N00001608 500 RO $ ________________ $ ________________

Label Intermec 4x2.5 E15132

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 17 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001458 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0014 1000002915 0013 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00001458

ITEM DESCRIPTION:

Label, Intermec P/N E02204 or equal. Thermal transfer label in 4 inches wide by ~2 ½ inches long (2.4 to 2.5 inches) designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white.

Label is constructed of polyester or similar high durability material, such as Intermec DuraTran II Kimdura and must be significantly tear resistant, moisture and abrasion resistant, provide significant permanent adhesion and be designed for limited external (outside) use when exposed to weather and temperature extremes.

The label must be designed to operate successfully with same as or equal to Intermec ThermaMax 2200 ribbon.

It must meet the attached requirements for salient characteristics for label. Perforation on the backing or substrate between labels is required. Not less than 2095 labels per roll.

0015 7530-N00001458 3,200 RO $ ________________ $ ________________

4x2.5 E02204

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 18 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001609 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0015 1000002915 0014 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00001609

ITEM DESCRIPTION:

Label, Intermec P/N E07267-PMS-115 or equal. Thermal transfer label of Yellow in color, in 4 inches wide by 6 inches long designed to work successfully on an Intermec PM4i or PD42 label printer. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics (label). The color of the label itself must be a shade of YELLOW as defined by PMS-115 or similar on the Pantone color matching system.

Perforation on the backing or substrate between labels is required. Not less than 979 labels per roll.

0016 7530-N00001609 2,500 RO $ ________________ $ ________________

E07267

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 19 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001181 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0016 1000002915 0015 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00001181

ITEM DESCRIPTION:

Label, Intermec P/N E12754 (white, beige or gray) or equal. Thermal transfer label of WHITE or BEIGE or GRAY in 3 inches wide by 2.5(2 ½) inches long designed to work successfully on an Intermec PM4i or PD42 label printer. May be also used on a Intermec 3100, 3400 or 4100 printer system. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon.

Label must meet the attached requirements for salient characteristics for label. The color of the label itself must be a shade of WHITE, BEIGE or GRAY as or similar on the Pantone color matching system.

Perforation on the backing or substrate between labels is required. Minimum of 1140 labels per roll.

0017 7530-N00001181 12,500 RO $ ________________ $ ________________

2.5x3 E12754

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 20 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000897 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0017 1000002915 0016 N/A N/A 753000L960023 N/A

SUPPLIES/SERVICES: 7530-N00000897

ITEM DESCRIPTION:

Label, Intermec P/N E12754 PMS-204 or equal. Thermal transfer label of PINK or very light red in color, in 3 inches wide by 2.5(2 ½) inches long designed to work successfully on an Intermec PM4i or PD42 label printer.

May be also used on a Intermec 3100, 3400 or 4100 printer system. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. The color of the label itself must be a shade of PINK as PMS-204 or similar on the Pantone color matching system. Perforation on the backing or substrate between labels is required. Minimum of 1140 labels per roll.

0018 7530-N00000897 500 RO $ ________________ $ ________________

3x2.5 E12754

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 21 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000896 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0018 1000002915 0017 N/A N/A 753000L050007 N/A

SUPPLIES/SERVICES: 7530-N00000896

ITEM DESCRIPTION:

Label, Intermec P/N E12754 PMS-148 or equal. Thermal transfer label of BROWN or tan in color, in 3 inches wide by 2.5 (2 ½) inches long designed to work successfully on an Intermec PM4i or PD42 label printer. May be also used on a Intermec 3100, 3400 or 4100 printer system. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. The color of the label itself must be a shade of BROWN as PMS-148 or similar on the Pantone color matching system. Perforation on the backing or substrate between labels is required. Minimum of 1140 labels per roll.

0019 7530-N00000896 550 RO $ ________________ $ ________________

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 22 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000895 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0019 1000002915 0018 N/A N/A 753000L050006 N/A

SUPPLIES/SERVICES: 7530-N00000895

ITEM DESCRIPTION:

Label, Intermec P/N E12754 PMS-365 or equal. Thermal transfer label of GREEN or light green in color, thermal transfer label in 3 inches wide by 2.5 (2 ½) inches long designed to work successfully on an Intermec PM4i or PD42 label printer. May be also used on a Intermec 3100, 3400 or 4100 printer system. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. The color of the label itself must be a shade of GREEN as PMS-365 or similar on the Pantone color matching system. Perforation on the backing or substrate between labels is required. Minimum of 1140 labels per roll.

0020 7530-N00000895 500 RO $ ________________ $ ________________

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 23 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001294 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0020 1000002915 0019 N/A N/A 753000L050005 N/A

SUPPLIES/SERVICES: 7530-N00001294

ITEM DESCRIPTION:

Label, Intermec P/N E12754 PMS-2707 or equal. Thermal transfer label of BLUE or light blue in color in 3 inches wide by 2.5 (2 ½) inches long designed to work successfully on an Intermec PM4i or PD42 label printer.

May be also used on a Intermec 3100, 3400 or 4100 printer system. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. The color of the label itself must be a shade of BLUE as PMS-2707 or similar on the Pantone color matching system. Perforation on the backing or substrate between labels is required. Minimum of 1140 labels a roll.

0021 7530-N00001294 2,500 RO $ ________________ $ ________________

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 24 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000898 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0021 1000002915 0020 N/A N/A 753000L050004 N/A

SUPPLIES/SERVICES: 7530-N00000898

ITEM DESCRIPTION:

Label, Intermec P/N E12754 PMS-115 or equal. Thermal transfer label of YELLOW in color in 3 inches wide by

2.5 (2 ½) inches long designed to work successfully on an Intermec PM4i or PD42 label printer. May be also used on a Intermec 3100, 3400 or 4100 printer system. Label is constructed of treated paper with laminate, same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. The color of the label itself must be a shade of YELLOW as PMS-115 or similar on the Pantone color matching system. Perforation on the backing or substrate between labels is required. Minimum of 1140 labels a roll.

0022 7530-N00000898 400 RO $ ________________ $ ________________

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 25 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000891 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0022 1000002915 0021 N/A N/A 753000L050008 N/A

SUPPLIES/SERVICES: 7530-N00000891

ITEM DESCRIPTION:

Label, Intermec P/N E04812 or equal. Thermal transfer label in 3.25 (3 ¼) inches wide by 2 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label.

Perforation on the backing or substrate between labels is required. Minimum of 2823 labels a roll.

0023 7530-N00000891 500 RO $ ________________ $ ________________

3.25x2 E04812

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 26 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001457 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0023 1000002915 0022 N/A N/A 753000L102206 N/A

SUPPLIES/SERVICES: 7530-N00001457

ITEM DESCRIPTION:

Label, Intermec P/N E03444 or equal. Thermal transfer label in 4 inches wide by 6 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of polyester or similar high durability material, such as Intermec DuraTran II Kimdura and must be significantly tear resistant, moisture and abrasion resistant, provide significant permanent adhesion and be designed for limited external (outside) use when exposed to weather and temperature extremes. The label must be designed to operate successfully with same as or equal to Intermec ThermaMax 2200 ribbon. It must meet the attached requirements for salient characteristics for label and be designed for limited outside storage. Perforation on the backing or substrate between labels is required. Minimum of 897 labels per roll.

0024 7530-N00001457 1,600 RO $ ________________ $ ________________

E03444

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 27 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000888 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0024 1000002915 0023 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00000888

ITEM DESCRIPTION:

Label, Intermec P/N E17551 or equal. Thermal transfer label in 3 inches wide by 3.5 (3 ½) inch long designed to work successfully on an Intermec 3400 series printer but may be used on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. May also be polyester or similar advanced material. But must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. Perforation on the backing or substrate between labels is required. Minimum of 1655 labels a roll.

0025 7530-N00000888 450 RO $ ________________ $ ________________

3x3.5 E17551

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 28 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001610 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0025 1000002915 0024 N/A N/A 753000L020001 N/A

SUPPLIES/SERVICES: 7530-N00001610

ITEM DESCRIPTION:

Label, Intermec P/N E21251 or equal. Thermal transfer label in 4 inches wide by 6 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated paper same as or equal to Intermec DuraTran II with laminate. May also be polyester or similar advanced material. But must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. In addition, label requires COLD WEATHER pressure sensitive adhesive with high tack capability for adhering to material at or below 32F environments. Perforation on the backing or substrate between labels is required. Minimum of 115 labels a roll.

0026 7530-N00001610 5,000 RO $ ________________ $ ________________

E21251

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 29 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000889 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0026 1000002915 0025 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00000889

ITEM DESCRIPTION:

Tag, Intermec P/N E03471 or equal. Thermal transfer TAG in 4 inches wide by 9.5 (9 ½) inches long designed to work successfully on an Intermec PM4i or PD42 or 3400 label printer. Color is white or off white. This item is a thermal transfer TAG that requires no backing, substrate or adhesive of any kind, Construction is paper with laminate same as or equal to Intermec DuraTran II. Tag is required to successfully print with a same as or equal to Intermec ThermaMAX 1500 and ThermaMAX 2200 ribbon. Perforation between tags is required. The Tag requires an indent or cutout on both sides of that tag at the perforation position to assist the printer in identifying and making pagination on an Intermec Pm4i or PD42G printer. A significant solid dark line across the label between 1/8 and ¼ inch at the perforation to assist in pagination on an Intermec Pm4i or PD42G printer may also be used for pagination in the target devices is required. Minimum of 1260 tags a roll.

0027 7530-N00000889 10 RO $ ________________ $ ________________

4.125x9.5 E03471

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 30 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000751 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0027 1000002915 0026 N/A N/A 7530013475210 N/A

SUPPLIES/SERVICES: 7530-N00000751

ITEM DESCRIPTION:

Label, Intermec P/N E11410/E25878 or equal. Thermal transfer label in 2 inches wide by 3 inch long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax

Perforation on the backing or substrate between labels is required. Minimum of 1920 labels per roll.

0028 7530-N00000751 675 RO $ ________________ $ ________________

Label Intermec 2x3 E11410

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 31 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001164 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0028 1000002915 0027 N/A N/A 7530014004117 N/A

SUPPLIES/SERVICES: 7530-N00001164

ITEM DESCRIPTION:

Label, Intermec P/N E16389/E25878 or equal. Thermal transfer label in 2 inches wide by 2.75 (2 ¾) up to 3 inches long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax and resin ribbon. Label must meet the attached requirements for salient characteristics for label. Perforation on the backing or substrate between labels is required. Minimum of 1920 labels a roll.

0029 7530-N00001164 400 RO $ ________________ $ ________________

Label Intermec 2 3/4x2 E16389

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 32 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000887 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0029 1000002915 0028 N/A N/A 753000L100929 N/A

SUPPLIES/SERVICES: 7530-N00000887

ITEM DESCRIPTION:

Label, Intermec P/N E08894 or equal. Thermal transfer label in 2.5 (2 ½) inches wide by 2.75 (2 ¾) long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Label is constructed of treated paper with laminate same as or equal to Intermec DuraTran II with laminate. Must be designed to operate successfully with same as or equal to Intermec ThermaMAX 1500 wax and ThermaMAX 2200 wax

Perforation on the backing or substrate between labels is required. Minimum of 2000 labels per roll.

0030 7530-N00000887 1,500 RO $ ________________ $ ________________

2.75x2.5 E08894.

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 33 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001611 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0030 1000002915 0029 N/A N/A 753000L100928 N/A

SUPPLIES/SERVICES: 7530-N00001611

ITEM DESCRIPTION:

Tag, Intermec P/N E23895 or equal. Thermal transfer indestructible TAG in 4 inches wide by 6 inches long designed to work successfully on an Intermec PM4i or PD42 label printer. Color is white or off white. Tag is construct of advanced exceedingly durable and materials similar to Intermec DuraTran II Synthetic Tag. Tag is used to apply to MILITARY SEAVANS and cargo through a required ~ ¼ inch or similar size hole in the top center at one end of the tag, at approximately ½ to 1 inch from one end. Tag must be very significantly tear, moisture and salt water resistant. Tag maybe exposed to environment extremes for many months at a time. Tag may be exposed to sunlight for long periods of time and therefore must be sunlight and fade resistant. The tag must remain human and machine legible for long periods. Tag must be significantly smudge and abrasion resistant. No adhesive or backing or substrate is required. Easy tear/cut perforation between tags is required. Tag must contain an indent or cut out on both sides of the tag to assist in pagination on an Intermec PM4i and PD42G printer. Minimum of 875 tags per roll.

0031 7530-N00001611 30 RO $ ________________ $ ________________

Label (Tag) Intermec 4x6 E23895

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 34 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001612 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0031 1000002915 0030 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00001612

ITEM DESCRIPTION:

Cleaning Card, Intermec P/N 1-110501-00 or equal. Cleaning card for Intermec PM4i and PD42G printer systems in 4.4 inches wide by 6 inches long. Cleaning card with sufficient solvent and soft abrasive designed specifically to clean and successfully maintain the print head of an Intermec manufactured thermal transfer label printer, specifically the Intermec PM4i and PD42G. 25 each per box.

0032 7530-N00001612 100 BX $ ________________ $ ________________

Card Cleaning Intermec 1-110501-00

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 35 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00000900 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0032 1000002915 0031 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7530-N00000900

ITEM DESCRIPTION:

Label, OCN. 8.5 (8 ½) inch wide x 11 inch long, contact adhesive labels in pattern of 6 equal labels on a sheet, backing or liner. Used for printing in a higher volume laser printer. 6 die or butt cut labels but be aligned and attached to an 8.5 wide by 11 liner or backing. The 6 labels shall be divided in 6 equal segments of 4.25 wide by 3.666667 inches long arranged in portrait fashion. Adhesive must be a pressure sensitive hot melt pattern adhesive to allow for an reasonably easy peel from the backing or substrate by an operator but have sufficient attachment that it will not prematurely separate from the liner or backing during the printing process. There must be sufficient room between the labels to allow an easy peel by the operator The liner, backing or substrate must be free of adhesive a minimum of 1/16 inch from the outside edge to prevent equipment contamination by adhesive on the edges. Label must be 20 bond weight. Reflectivity and Opacity must meet MIL-STD-129P. All extra space in a carton or box must be filled with flat cardboard to prevent rolling and peeling of labels in transit. No other material as packing or fill is permitted. 1000 sheets per box or 6000 labels per box.

0033 7530-N00000900 850 CAR $ ________________ $ ________________

Label OCN 8.5x11

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 36 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001307 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0033 1000002915 0032 N/A N/A 753000L980006 N/A

SUPPLIES/SERVICES: 7530-N00001307

ITEM DESCRIPTION:

Paper, IRRD. 8.5 (8 ½) inch wide x 11 inch long 24 bond weight paper with a perforation at the 5.5 (5 ½) line dividing the paper into 2 equal sections. No adhesive is required. Used for orienting in a higher volume laser printer. White 24lb BOND weight laser graphic paper, blank stock of 8.5 (8 ½) wide by 11 inch long used for mass printing in a higher volume laser printer. Recycled paper is not acceptable. Moisture content must not exceed 5.7. No adhesive is required or applied. In portrait mode at the 5.5 (5 ½) line, the paper must contain a perforation separating the 2 halves. Paper must have sufficient reflectivity for printed 2D barcodes to be machine legible using modern barcode imagers. Reflectivity and Opacity must meet MIL-STD-129P. All extra space in a carton or box must be filled with flat cardboard. No other material as packing or fill is permitted. Packages in reams of 500 each and 2500 sheet packaged per box.

0034 7530-N00001307 3,000 CAR $ ________________ $ ________________

Paper IRRD 8.5x11

24LB

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 37 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7530-N00001293 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0034 1000002915 0033 N/A N/A 753000L101758 N/A

SUPPLIES/SERVICES: 7530-N00001293

ITEM DESCRIPTION:

Paper, IRRD. 8.5 (8 ½) inch wide x 11 inch long 20 bond weight paper, designed for high speed printing on a larger volume laser printer. White 20lb BOND weight laser graphic paper, blank stock of 8.5 (8 ½) wide by 11 inch long used for mass printing in a higher volume laser printer. Recycled paper is not acceptable. Moisture content must not exceed 5.7. No adhesive is required or applied. In portrait mode at the 5.5 (5 ½) line, the paper must contain a perforation separating the 2 halves. Paper must have sufficient reflectivity for printed 2D barcodes to be machine legible using modern barcode imagers. Reflectivity and Opacity must meet MIL-STD-129P. All extra space in a carton or box must be filled with flat cardboard. No other material as packing or fill is permitted. Packages in reams of 500 each and 2500 sheet packaged per box.

0035 7530-N00001293 5,000 CAR $ ________________ $ ________________

Paper IRRD 8.5x11

20LB

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 38 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7510-N00000718 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0035 1000002915 0034 N/A N/A 753000L880254 N/A

SUPPLIES/SERVICES: 7510-N00000718

ITEM DESCRIPTION:

Ribbon, Intermec P/N 12234118 or equal. Ribbon must be 4 inches wide or greater but no greater than 4.25 inches. Ribbon must be 18000 inches long with no greater than 48 inches (+/-) variation in length. Ribbon must meet the applicable salient requirements for the applicable ribbon type in the attached salient characteristics document. Ribbon must be designed to work with paper with laminate the same as or equal to Intermec DuraTran II. Ribbon wax and resin designed to work successfully as a Thermal Transfer ribbon on an Intermec PM4i or PD42 label printer. Material composite of the ribbon must be same as or equal to Intermec ThermaMax 2200 ribbon.

0036 7510-N00000718 14,000 RO $ ________________ $ ________________

12334118

This line item is an option in accordance with the terms and conditions of the solicitation/award.

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PAGE 39 OF 142 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 7510-N00000763 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0036 1000002915 0035 N/A N/A N/A N/A

SUPPLIES/SERVICES: 7510-N00000763

ITEM DESCRIPTION:

Ribbon, Intermec P/N 11034118 or equal. Ribbon must be 4 inches wide or greater but no greater than 4.25 inches. Ribbon must be 18000 inches long with no greater than 48 inches (+/-) variation in length. Ribbon must meet applicable salient requirements (ribbon) in the attached salient characteristics document. Ribbon must be designed to work with paper with laminate the same as or equal to Intermec DuraTran II. Ribbon of wax designed to work successfully as a Thermal Transfer ribbon on an Intermec PM4i or PD42 label printer.