SP330011R1009.pdf

PDF 477 KB Posted Sep 20, 2011

Attached to: Wood Shipping Boxes, Weapon Skid Kits, Wood Bases, and Chock Blocks, DLA Distribution Anniston, Alabama
Solicitation number: SP3300-11-R-1009
Issued by: Defense Logistics Agency Distribution

About this file

From the source

Solicitation

View the file

Other files

File	Type	Posted
Amendment 0005_SP330011R1009.pdf	PDF	Oct 20, 2011
Amendment 0004_SP330011R1009.pdf	PDF	Oct 17, 2011
Attachment 1_Schedule of Supplies_Conformed thru Amendment 0004.xlsx	XLSX spreadsheet	Oct 17, 2011
Amendment 0003_SP330011R1009.pdf	PDF	Oct 13, 2011
SP330011R1009_Amendment 0002.pdf	PDF	Oct 6, 2011
Attachment 4 - Special Packaging Instructions.pdf	PDF	Oct 6, 2011
Attachment 1_Schedule of Supplies_Conformed thru Amendment 0001.xls	XLS spreadsheet	Sep 30, 2011
SP330011R1009_Amendment 0001.pdf	PDF	Sep 30, 2011
Attachment 3 - Technical Drawings.pdf	PDF	Sep 30, 2011
Attachment 2 - Past Performance Questionnaire.doc	DOC document	Sep 20, 2011
SP3300-11-R-1009 Attachment 1 - Schedule of Supplies.xls	XLS spreadsheet	Sep 20, 2011

Show all 11

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

SP3300-11-R-1009

5. SOLICITATION NUMBER

2011 SEP 20

6. SOLICITATION ISSUE

DATE

Brian Rose PNNAB57

a. NAME

Phone: 717-770-4673

b. TELEPHONE NUMBER (No Collect calls)

2011 OCT 11

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY CODE SP3300

DLA DISTRIBUTION

OFFICE OF PROCUREMENT - EBS

2001 MISSION DRIVE

NEW CUMBERLAND PA 17070-5000

USA

10. THIS ACQUISITION IS

100UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

EMERGING SMALL

BUSINESS

8 (A)

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS

320920NAICS:

500 EMPLSIZE STANDARD:

11. DELIVERYFOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

PAS: None

17a. CONTRACTOR/ CODE

OFFEROR

FACILITY

CODE

TELEPHONE NO.

18a. PAYMENT WILL BE MADE BY CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

See Schedule

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or Print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or Print) 31c. DATE SIGNED

SEE SCHEDULE

7. FOR SOLICITATION

INFORMATION CALL:

SEE SCHEDULE

110PAGE 1 OF

03:00 PM

STANDARD FORM 1449 (REV. 3/2005)

Prescribed by GSA - FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE ADDENDUM

32a. QUANTITY IN COLUMN 21 HAS BEEN

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:RECEIVED INSPECTED

COMPLETE PARTIAL FINAL

STANDARD FORM 1449 (REV. 3/2005) BACK

36. PAYMENT

PARTIAL FINAL

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42b. RECEIVED AT (Location)

CONTINUED ON NEXT PAGE

SF 1449, SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

CONTINUATION SHEET

NOTICE TO OFFERORS

1. This Request for Proposal (RFP) is being issued to establish one requirements type contract(s) with fixed unit prices for wood shipping boxes, weapon skid kits, wood bases, and chock blocks to DLA Distribution Anniston, Alabama. Products must be constructed complete and in accordance with specifications contained in each delivery order. The delivery orders will be issued on a Firm Fixed Price (FFP) basis.

2. Period of Performance:

Base year: December 1, 2011 - November 31, 2012 Option year one: December 1, 2012 - November 31, 2013 Option year two: December 1, 2013 - November 31, 2014

3. Limitations on Subcontracting: Any contractor under a small business set-aside for supplies shall be a small business within the applicable size standard stated in the solicitation and must provide either its own manufactured product or that of another domestic small business manufacturing or processing concern for this acquisition. In addition, the Limitations on Subcontracting (LOS) clause referenced in this solicitation requires any small business manufacturer of shipping boxes to perform at least 50% of the cost of manufacturing the boxes, not including the cost of materials.

4. Samples: The contractor shall submit one sample of each wood product within 21 calendar days after the date of contract award to the Government Point of Contact (POC) at DLA Distribution Anniston, Alabama for approval. Within 10 calendar days after receipt of the sample, the Government POC shall notify the contractor concerning acceptability of the sample. The Government will issue a delivery order to accept and reimburse the contractor for the acceptable samples. If the sample does not comply with the technical specifications, the Contractor shall be responsible for correction and resubmittal of the sample at no cost to the Government.

If the Contractor cannot provide acceptable samples, the Government reserves the right to terminate the contract award in accordance with FAR 52.212-4(m), termination for cause, and either issue an award to the next lowest offeror or resolicit the requirement.

The contractor shall deliver all samples to the following address:

SB3540

DLA DISTRIBUTION ANNISTON, ALABAMA

ATTN: EDDIE SHURBUTT

7 FRANKFORD AVE

ANNISTON, AL 36201-4199

5. Estimated Quantities: The quantities shown in the Schedule of Supplies/Services are estimated only. They represent the Government’s best known estimate for each line item. Payment will be made for ONLY the actual quantities provided to the Government at the price specified. If the Government requirements do not result in the quantities estimated; such event shall not constitute the basis for and equitable price adjustment under the contract.

6. Payment: Payments under this contract will be established for each individual delivery order and will be made by Governmentwide Commercial Purchase Card.

7. Delivery Orders: Delivery orders will be issued by fax or electronic commerce methods (e-mail). Any contracting officer or ordering officer at DLA Distribution is authorized to place orders against this contract.

The primary contract specialist for delivery orders for this contract is:

PAGE 3 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SP3300-11-R-1009

DLA Distribution J7 (AB) 2001 Mission Drive, Bldg 404 Attn: Brian Rose Phone: 717-770-4673 E-mail: brian.rose@dla.mil

Upon shipment of the supplies on the written delivery order, the contractor shall contact the contract specialist who issued the written delivery order.

8. Central Contractor Registration: As stated in referenced FAR 52.212-1, Instruction to Offeror, paragraph (k), a prospective awardee shall be registered in the CCR database prior to award, during performance, and through final payment if any contract resulting from this solicitation. Offerors may obtain information on registration and approval confirmation requirements via the internet at http://www.ccr.gov or by calling 1-888-227-2423 or 269-961-5757.

9. Packaging: All wood products shall be packaged best commercial practice in accordance with ASTM 3951 and marked in accordance with MIL-STD-129P. All shipments must contain proper shipping documentation. Contractor shall attach, in a water resistant envelope, to the exterior shipping container a commercial packing list.

All documents must include at a minimum, contract number and document number for the item, stock number, quantity, and unit of issue. Omission of any data on the shipping documentation could cause a delay in receipt of goods and significantly delay payment.

10. Unit of Issue: EA = Each KT = Kit

11. Delivery/Shipment: Each wood product shall be in compliance with the International Standards for Phytosanitary Measures Publication No. 15 (ISPM 15): Guidelines for Regulating Wood Packaging Material in International Trade

The Government desires delivery of the item(s) identified on the delivery order within 21 calendar days after receipt of a delivery order. The Government requires delivery of the item(s) identified on the delivery order within 30 calendar days after receipt of a delivery order.

The Contractor shall deliver the wood shipping boxes, wood bases, weapon skid kits, and chock blocks to the following address:

SB3540

DLA Distribution Anniston, Alabama Attn: Eddie Shurbutt 7 Frankford Ave.

Anniston, AL 36

PAGE 4 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLIES/SERVICES: 8115-N00001422

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 87 INCH LENGTH X 49 INCH WIDTH X 15.5 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 100 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED. ALTERNATE FASTENING SYSTEMS NOT ALLOWED. ALL WOOD SHALL MEET THE

REQUIREMENTS OF ISPM-15,

INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L110041.

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 N00001422 Box Wood 20 EA $ ________________ $ ________________ 87x49x15.5

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 N/A N/A N/A N/A 811500L110041 N/A

SUPPLIES/SERVICES: 8115-N00001423

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 32.5 INCH LENGTH X 14 INCH WIDTH X 11.25 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

PAGE 5 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001423 CONT'D

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 110 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED. ALTERNATE FASTENING SYSTEMS NOT ALLOWED. ALL WOOD SHALL MEET THE

INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L110042.

0002 N00001423 Box Wood 30 EA $ ________________ $ ________________ 32.5x14x11.25

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PREP FOR DELIVERY: Please See Line Item: 0001

ITEM PR PRLI PR PRLI Material Need Ship Date .

0002 N/A N/A N/A N/A 811500L110042 N/A

SUPPLIES/SERVICES: 8115-N00001424

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 63.25 INCH LENGTH X 25 INCH WIDTH X 20 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 135 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

PAGE 6 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001424 CONT'D

MATERIALS & CONSTRUCTION NOT ALLOWED. ALTERNATE FASTENING SYSTEMS NOT ALLOWED. ALL WOOD SHALL MEET THE

REQUIREMENTS OF ISPM-15,

INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L110043.

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 45 INCH LENGTH X 21 INCH WIDTH X 23 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 100 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED. ALTERNATE FASTENING SYSTEMS NOT ALLOWED. ALL WOOD SHALL MEET THE

INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L110044.

0003 N00001424 Box Wood 20 EA $ ________________ $ ________________ 63.25x25x20

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

ITEM PR PRLI PR PRLI Material Need Ship Date .

0003 N/A N/A N/A N/A 811500L110043 N/A

SUPPLIES/SERVICES: 8115-N00001425

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 63.25 INCH LENGTH X 25 INCH WIDTH X 20 INCH DEPTH (INSIDE

PAGE 7 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001425 CONT'D

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 135 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED. ALTERNATE FASTENING SYSTEMS NOT ALLOWED. ALL WOOD SHALL MEET THE

REQUIREMENTS OF ISPM-15,

INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L110043.

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 45 INCH LENGTH X 21 INCH WIDTH X 23 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 100 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED. ALTERNATE FASTENING SYSTEMS NOT ALLOWED. ALL WOOD SHALL MEET THE

INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT CHANGES APPLY. STOCK NUMBER 811500L110044.

0004 N00001425 Box Wood 20 EA $ ________________ $ ________________ 45x21x23

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PAGE 8 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001426 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0004 N/A N/A N/A N/A 811500L110044 N/A

SUPPLIES/SERVICES: 8115-N00001426

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 1000 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF THE BOX MAY BE SOLID WOOD CONSTRUCTION..

ALTERNATE FASTENING SYSTEMS

NOT ALLOWED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT

CHANGES APPLY. STOCK

NUMBER 811500L110045.

WOOD BOXES. SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED

ENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 200 LBS. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110046.

WOOD BOXES. SIZE: 101 INCH LENGTH X 30.5 INCH WIDTH X 26 INCH DEPTH (INSIDE DIMENSIONS) CLASS: 2 (HEAVY DUTY) STYLE: 2 (FULL CLEATEDENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 500 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110047.

WOOD BOXES. SIZE: 23.5 INCH LENGTH X 20 INCH WIDTH X 16 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY) STYLE: 2 (FULL CLEATEDENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 185 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110048.

WOOD BOXES. SIZE: 89 INCH LENGTH X 12.5 INCH WIDTH X 20 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY) STYLE: 2 (FULL CLEATEDENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 500 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110049.

WOOD BASE FOR COEI (COMPONENT OF END ITEM) SIZE: 32 INCH LENGTH X 20 INCH WIDTH. PLYWOOD COMMERCIAL GRADE, 3/4 INCH. SIZE: 3 INCH X

4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE PLYWOOD. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED. ALL

PAGE 9 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS. THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15

CERTIFICATION. ALL

DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK. DRAWING ATTACHED. STOCK NUMBER 811500L110050.

WEAPON SKID KITS SIZE: 48 INCH X 48 INCH PIECE OF 18/32 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND 4 INCH X

4 INCH X 48 INCH PINE

SKID NAILED TO THE SHEATHING. THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH

KIT (NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED. ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE

MARKED WITH THE ISPM-15 CERTIFICAITON. ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP. NOTE: ALL

LUMBER SIZES ARE

"NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES

OF THE ASSEMBLED SKID

KIT. THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE PROVIDED AS SUCH, HOWEVER THE

LENGTH AND WIDTH OF THE

PLYWOOD SHEATHING MAY BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY. DRAWING ATTACHED

STOCK NUMBER 399000L110051

CHOCK BLOCKS. SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH ROUGH PINE BLOCK WOODEN BLOCK CUT THRUGH

THE CENTERLINE AT A 45

DEGREE ANGLE. THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE ALTERNATE MATERIALS AND CONSTRUCTION NOT

ALLOWED ALL WOOD SHALL

MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED. THE WOOD

SHALL BE FREE OF

SPLITS, WARP, WANE AND BARK. DRAWING ATTACHED. STOCK NUMBER 254000L110052

0005 N00001426 Box Wood 200 EA $ ________________ $ ________________ 94.5x94.5x6.25

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PAGE 10 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001427 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0005 N/A N/A N/A N/A 811500L110045 N/A

SUPPLIES/SERVICES: 8115-N00001427

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 1000 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF THE BOX MAY BE SOLID WOOD CONSTRUCTION..

ALTERNATE FASTENING SYSTEMS

NOT ALLOWED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT

CHANGES APPLY. STOCK

NUMBER 811500L110045.

WOOD BOXES. SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED

ENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 200 LBS. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110046.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110047.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110048.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110049.

WOOD BASE FOR COEI (COMPONENT OF END ITEM) SIZE: 32 INCH LENGTH X 20 INCH WIDTH. PLYWOOD COMMERCIAL GRADE, 3/4 INCH. SIZE: 3 INCH X

4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE PLYWOOD. ALTERNATE MATERIALS &

PAGE 11 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001427 CONT'D

LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS. THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15

CERTIFICATION. ALL

DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK. DRAWING ATTACHED. STOCK NUMBER 811500L110050.

WEAPON SKID KITS SIZE: 48 INCH X 48 INCH PIECE OF 18/32 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND 4 INCH X

4 INCH X 48 INCH PINE

SKID NAILED TO THE SHEATHING. THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH

KIT (NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED. ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE

MARKED WITH THE ISPM-15 CERTIFICAITON. ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP. NOTE: ALL

LUMBER SIZES ARE

"NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES

OF THE ASSEMBLED SKID

KIT. THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE PROVIDED AS SUCH, HOWEVER THE

LENGTH AND WIDTH OF THE

PLYWOOD SHEATHING MAY BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY. DRAWING ATTACHED

STOCK NUMBER 399000L110051

CHOCK BLOCKS. SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH ROUGH PINE BLOCK WOODEN BLOCK CUT THRUGH

THE CENTERLINE AT A 45

DEGREE ANGLE. THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE ALTERNATE MATERIALS AND CONSTRUCTION NOT

ALLOWED ALL WOOD SHALL

MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED. THE WOOD

0006 N00001427 Box Wood 400 EA $ ________________ $ ________________ 15x15x19

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PAGE 12 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001428 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0006 N/A N/A N/A N/A 811500L110046 N/A

SUPPLIES/SERVICES: 8115-N00001428

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 1000 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF THE BOX MAY BE SOLID WOOD CONSTRUCTION..

ALTERNATE FASTENING SYSTEMS

NOT ALLOWED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT

CHANGES APPLY. STOCK

NUMBER 811500L110045.

WOOD BOXES. SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED

ENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 200 LBS. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110046.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110047.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110048.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110049.

WOOD BASE FOR COEI (COMPONENT OF END ITEM) SIZE: 32 INCH LENGTH X 20 INCH WIDTH. PLYWOOD COMMERCIAL GRADE, 3/4 INCH. SIZE: 3 INCH X

4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE PLYWOOD. ALTERNATE MATERIALS &

PAGE 13 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001428 CONT'D

LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS. THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15

CERTIFICATION. ALL

DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK. DRAWING ATTACHED. STOCK NUMBER 811500L110050.

WEAPON SKID KITS SIZE: 48 INCH X 48 INCH PIECE OF 18/32 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND 4 INCH X

4 INCH X 48 INCH PINE

SKID NAILED TO THE SHEATHING. THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH

KIT (NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED. ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE

MARKED WITH THE ISPM-15 CERTIFICAITON. ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP. NOTE: ALL

LUMBER SIZES ARE

"NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES

OF THE ASSEMBLED SKID

KIT. THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE PROVIDED AS SUCH, HOWEVER THE

LENGTH AND WIDTH OF THE

PLYWOOD SHEATHING MAY BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY. DRAWING ATTACHED

STOCK NUMBER 399000L110051

CHOCK BLOCKS. SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH ROUGH PINE BLOCK WOODEN BLOCK CUT THRUGH

THE CENTERLINE AT A 45

DEGREE ANGLE. THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE ALTERNATE MATERIALS AND CONSTRUCTION NOT

ALLOWED ALL WOOD SHALL

MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED. THE WOOD

0007 N00001428 Box Wood 100 EA $ ________________ $ ________________ 101x30.5x26

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PAGE 14 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001429 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0007 N/A N/A N/A N/A 811500L110047 N/A

SUPPLIES/SERVICES: 8115-N00001429

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 1000 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF THE BOX MAY BE SOLID WOOD CONSTRUCTION..

ALTERNATE FASTENING SYSTEMS

NOT ALLOWED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT

CHANGES APPLY. STOCK

NUMBER 811500L110045.

WOOD BOXES. SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED

ENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 200 LBS. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110046.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110047.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110048.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110049.

WOOD BASE FOR COEI (COMPONENT OF END ITEM) SIZE: 32 INCH LENGTH X 20 INCH WIDTH. PLYWOOD COMMERCIAL GRADE, 3/4 INCH. SIZE: 3 INCH X

4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE PLYWOOD. ALTERNATE MATERIALS &

PAGE 15 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001429 CONT'D

LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS. THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15

CERTIFICATION. ALL

DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK. DRAWING ATTACHED. STOCK NUMBER 811500L110050.

WEAPON SKID KITS SIZE: 48 INCH X 48 INCH PIECE OF 18/32 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND 4 INCH X

4 INCH X 48 INCH PINE

SKID NAILED TO THE SHEATHING. THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH

KIT (NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED. ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE

MARKED WITH THE ISPM-15 CERTIFICAITON. ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP. NOTE: ALL

LUMBER SIZES ARE

"NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES

OF THE ASSEMBLED SKID

KIT. THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE PROVIDED AS SUCH, HOWEVER THE

LENGTH AND WIDTH OF THE

PLYWOOD SHEATHING MAY BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY. DRAWING ATTACHED

STOCK NUMBER 399000L110051

CHOCK BLOCKS. SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH ROUGH PINE BLOCK WOODEN BLOCK CUT THRUGH

THE CENTERLINE AT A 45

DEGREE ANGLE. THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE ALTERNATE MATERIALS AND CONSTRUCTION NOT

ALLOWED ALL WOOD SHALL

MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED. THE WOOD

0008 N00001429 Box Wood 500 EA $ ________________ $ ________________ 23.5x20x16

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PAGE 16 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001430 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0008 N/A N/A N/A N/A 811500L110048 N/A

SUPPLIES/SERVICES: 8115-N00001430

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 1000 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF THE BOX MAY BE SOLID WOOD CONSTRUCTION..

ALTERNATE FASTENING SYSTEMS

NOT ALLOWED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT

CHANGES APPLY. STOCK

NUMBER 811500L110045.

WOOD BOXES. SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED

ENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 200 LBS. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110046.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110047.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110048.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110049.

WOOD BASE FOR COEI (COMPONENT OF END ITEM) SIZE: 32 INCH LENGTH X 20 INCH WIDTH. PLYWOOD COMMERCIAL GRADE, 3/4 INCH. SIZE: 3 INCH X

4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE PLYWOOD. ALTERNATE MATERIALS &

PAGE 17 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001430 CONT'D

LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS. THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15

CERTIFICATION. ALL

DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK. DRAWING ATTACHED. STOCK NUMBER 811500L110050.

WEAPON SKID KITS SIZE: 48 INCH X 48 INCH PIECE OF 18/32 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND 4 INCH X

4 INCH X 48 INCH PINE

SKID NAILED TO THE SHEATHING. THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH

KIT (NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED. ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE

MARKED WITH THE ISPM-15 CERTIFICAITON. ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP. NOTE: ALL

LUMBER SIZES ARE

"NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES

OF THE ASSEMBLED SKID

KIT. THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE PROVIDED AS SUCH, HOWEVER THE

LENGTH AND WIDTH OF THE

PLYWOOD SHEATHING MAY BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY. DRAWING ATTACHED

STOCK NUMBER 399000L110051

CHOCK BLOCKS. SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH ROUGH PINE BLOCK WOODEN BLOCK CUT THRUGH

THE CENTERLINE AT A 45

DEGREE ANGLE. THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE ALTERNATE MATERIALS AND CONSTRUCTION NOT

ALLOWED ALL WOOD SHALL

MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED. THE WOOD

0009 N00001430 Box Wood 100 EA $ ________________ $ ________________ 89x12.5x20

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PAGE 18 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001431 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0009 N/A N/A N/A N/A 811500L110049 N/A

SUPPLIES/SERVICES: 8115-N00001431

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 1000 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF THE BOX MAY BE SOLID WOOD CONSTRUCTION..

ALTERNATE FASTENING SYSTEMS

NOT ALLOWED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT

CHANGES APPLY. STOCK

NUMBER 811500L110045.

WOOD BOXES. SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED

ENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 200 LBS. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110046.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110047.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110048.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110049.

WOOD BASE FOR COEI (COMPONENT OF END ITEM) SIZE: 32 INCH LENGTH X 20 INCH WIDTH. PLYWOOD COMMERCIAL GRADE, 3/4 INCH. SIZE: 3 INCH X

4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE PLYWOOD. ALTERNATE MATERIALS &

PAGE 19 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 8115-N00001431 CONT'D

LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS. THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15

CERTIFICATION. ALL

DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK. DRAWING ATTACHED. STOCK NUMBER 811500L110050.

WEAPON SKID KITS SIZE: 48 INCH X 48 INCH PIECE OF 18/32 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND 4 INCH X

4 INCH X 48 INCH PINE

SKID NAILED TO THE SHEATHING. THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH

KIT (NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED. ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE

MARKED WITH THE ISPM-15 CERTIFICAITON. ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP. NOTE: ALL

LUMBER SIZES ARE

"NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES

OF THE ASSEMBLED SKID

KIT. THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE PROVIDED AS SUCH, HOWEVER THE

LENGTH AND WIDTH OF THE

PLYWOOD SHEATHING MAY BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY. DRAWING ATTACHED

STOCK NUMBER 399000L110051

CHOCK BLOCKS. SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH ROUGH PINE BLOCK WOODEN BLOCK CUT THRUGH

THE CENTERLINE AT A 45

DEGREE ANGLE. THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE ALTERNATE MATERIALS AND CONSTRUCTION NOT

ALLOWED ALL WOOD SHALL

MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED. THE WOOD

0010 N00001431 Base 400 EA $ ________________ $ ________________ Wood 32x20

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PAGE 20 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 3990-N00001432 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0010 N/A N/A N/A N/A 811500L110050 N/A

SUPPLIES/SERVICES: 3990-N00001432

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 1000 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF THE BOX MAY BE SOLID WOOD CONSTRUCTION..

ALTERNATE FASTENING SYSTEMS

NOT ALLOWED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT

CHANGES APPLY. STOCK

NUMBER 811500L110045.

WOOD BOXES. SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED

ENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 200 LBS. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110046.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110047.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110048.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110049.

WOOD BASE FOR COEI (COMPONENT OF END ITEM) SIZE: 32 INCH LENGTH X 20 INCH WIDTH. PLYWOOD COMMERCIAL GRADE, 3/4 INCH. SIZE: 3 INCH X

4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE PLYWOOD. ALTERNATE MATERIALS &

PAGE 21 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 3990-N00001432 CONT'D

LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS. THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15

CERTIFICATION. ALL

DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK. DRAWING ATTACHED. STOCK NUMBER 811500L110050.

WEAPON SKID KITS SIZE: 48 INCH X 48 INCH PIECE OF 18/32 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND 4 INCH X

4 INCH X 48 INCH PINE

SKID NAILED TO THE SHEATHING. THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH

KIT (NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED. ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE

MARKED WITH THE ISPM-15 CERTIFICAITON. ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP. NOTE: ALL

LUMBER SIZES ARE

"NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES

OF THE ASSEMBLED SKID

KIT. THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE PROVIDED AS SUCH, HOWEVER THE

LENGTH AND WIDTH OF THE

PLYWOOD SHEATHING MAY BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY. DRAWING ATTACHED

STOCK NUMBER 399000L110051

CHOCK BLOCKS. SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH ROUGH PINE BLOCK WOODEN BLOCK CUT THRUGH

THE CENTERLINE AT A 45

DEGREE ANGLE. THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE ALTERNATE MATERIALS AND CONSTRUCTION NOT

ALLOWED ALL WOOD SHALL

MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED. THE WOOD

0011 N00001432 Skid Kit 6,000 KT $ ________________ $ ________________ 48x48

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 2012 NOV 30

PAGE 22 OF 110 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 2540-N00001433 CONT'D

ITEM PR PRLI PR PRLI Material Need Ship Date .

0011 N/A N/A N/A N/A 399000L110051 N/A

SUPPLIES/SERVICES: 2540-N00001433

ITEM DESCRIPTION:

WOOD-CLEATED PANELBOARD SHIPPING BOXES. SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE

DIMENSIONS). TYPE: III

(PLYWOOD). CLASS: 2 (OVERSEAS). STYLE: A (STANDARD BOX CORNER). PRESERVATIVE TREATMENT: A (WITHOUT

WATER-REPELLENT WOOD

PRESERVATIVE). LOAD: TYPE 3 (DIFFICULT). CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH

6.3 CONTENTS

APPROXIMATELY 1000 LBS. CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED. SHIPPED ASSEMBLED. STRAPPING NOT

REQUIRED. ALTERNATE

MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF THE BOX MAY BE SOLID WOOD CONSTRUCTION..

ALTERNATE FASTENING SYSTEMS

NOT ALLOWED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS. ASTM D6251-07 AND CURRENT

CHANGES APPLY. STOCK

NUMBER 811500L110045.

WOOD BOXES. SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS). CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED

ENDS, BUTT JOINTS) TREATMENT: A (WITHOUT TREATMENT) CONTENTS APPROXIMATELY 200 LBS. ALTERNATE MATERIALS &

CONSTRUCTION NOT ALLOWED.

SKIDS ARE REQUIRED. SHIPPED ASSEMBLED. ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND

CURRENT CHANGES APPLY STOCK NUMBER 811500L110046.

WOOD BOXES. SIZE: 101 INCH LENGTH X 30.5 INCH WIDTH X 26 INCH DEPTH (INSIDE DIMENSIONS) CLASS: 2 (HEAVY…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.