Attachment 3 - Technical Drawings.pdf
PDF 56 KB Posted
- Attached to
- Wood Shipping Boxes, Weapon Skid Kits, Wood Bases, and Chock Blocks, DLA Distribution Anniston, Alabama
- Solicitation number
- SP3300-11-R-1009
- Issued by
-
Defense Logistics Agency Distribution
About this file
Attachment 3 Technical Drawings
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 0005_SP330011R1009.pdf | ||
| Amendment 0004_SP330011R1009.pdf | ||
| Attachment 1_Schedule of Supplies_Conformed thru Amendment 0004.xlsx | XLSX spreadsheet | |
| Amendment 0003_SP330011R1009.pdf | ||
| SP330011R1009_Amendment 0002.pdf | ||
| Attachment 4 - Special Packaging Instructions.pdf | ||
| Attachment 1_Schedule of Supplies_Conformed thru Amendment 0001.xls | XLS spreadsheet | |
| SP330011R1009_Amendment 0001.pdf | ||
| SP330011R1009.pdf | ||
| Attachment 2 - Past Performance Questionnaire.doc | DOC document | |
| SP3300-11-R-1009 Attachment 1 - Schedule of Supplies.xls | XLS spreadsheet |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
8"
17" 6"
THE EXAMPLE SHOWN HEREIN IS OF A WOODEN BLOCK CUT THROUGH THE
CENTERLINE AT A 45 DEGREE ANGLE. THIS PRODUCES 2 CHOCKS OF EQUAL SIZE. THE
WOOD SHALL BE ROUGH CUT PINE, HEAT TREATED PER ISPM-15. THE WOOD SHALL BE
FREE OF SPLITS, WARP, WANE AND BARK.
Approx. 4 ½ “
CHOCK BLOCK
DRAWN BY: EDDIE SHURBUTT
DLA, ANNISTON AL 12-09-2010
48"
48"
¾” Nominal
WEAPONS SKID KIT
4" 4"
4" x 4" x 48" nominal, pine skids, Nailed to the plywood.
All lumber must be heat treated per ISPM-15 requirements. The outer skids must be visibly marked with the ISPM-15 certification. All dunnage must be marked with the ISPM-15 Dunnage mark.
DUNNAGE
4 Each, 2" x 4" x 22" nominal, pine (per set)
20"
32"
Wood base for COEI
3" x 4" x 20" nominal, pine skids, 2" bevel each end, Nailed to the PLYWOOD.
4"
All lumber must be heat treated per ISPM-15 requirements. The outer skids must be visibly marked with the ISPM-15 certification. All dunnage must be marked with the ISPM-15 Dunnage mark.
3"
4"
| Page-1� |
| Weapons Skid Kit.pdf |
| Page-1� |
| Woodbase for COEI.pdf |
| Page-1� |
File details come from the government source that posted it. Updated .