SP330011R1009_Amendment 0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO.

See Block 14

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE SP3300 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE FACILITY CODE

SP330011R1009

X

2011-Aug-08

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of OffersX X is extended, is not extended.

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

12. ACCOUNTING AND APPROPRIATION DATA (If required)

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

E. IMPORTANT: Contractor is not, Xis required to sign this document and return 1 copies to issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A NAME AND TITLE OF SIGNER (Type or print)

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

16B. UNITED STATES OF AMERICA15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

(a) By completing Items 8 and 15, and returning

DLA DISTRIBUTION

OFFICE OF PROCUREMENT - EBS

2001 MISSION DRIVE

NEW CUMBERLAND PA 17070-5000

15C. DATE SIGNED 16C. DATE SIGNED

D. OTHER (Specify type of modification and authority)

09/30/2011

3. EFFECTIVE DATE

Previous Opening/Closing Date:

2011 SEP 20 / 2011 OCT 11

Time: 3:00 PM Changed to:

2011 SEP 20 / 2011 OCT 20

Time: 3:00 PM See Attached Continuation Sheet(s).

(X)

CHECK ONE

PAGE OF PAGES

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CONTINUED ON NEXT PAGE

SF 1449, SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

CONTINUATION SHEET

Amendment 0001 makes the following revisions:

1) Makes revisions to the Addendum to FAR 52.212-1

2) Adds Attachment 3 - Technical Drawings

3) Changes the description of CLIN x011 FROM 48 inch x 48 inch of 18/32 inch grade C/D or CDX plywood sheathing TO 48 inch x 48 inch of 3/4 inch grade C/D or CDX plywood sheathing.

4) Adds new CLINs 0013-0019, 1014-1018, 2014-2018. Replaces Attachment 1 - Schedule of Supplies/Services.

5) Replaces Section B in the solicitation to mirror Attachment 1 - Schedule of Supplies/Services.

6) Answers the following questions:

Offeror Question 1:

Can you advise the ordering pattern by the user? Are orders placed for replenishment of stock or by specific requirement? Are items ordered one CLIN at a time, or could we anticipate that we would have enough volume over multiple items in each delivery order to fill truckload(s)? Ideally, would it be possible to get or access a past history of delivery orders that would give us the picture we need? Any insight you could give here would be appreciated as it will make a difference in our freight costing.

Government Answer 1:

This is a new procurement. There is no historical ordering pattern information available. The Government will be issuing delivery orders based on specific customer requirements not on stock replenishment.

Therefore, DLA Distribution Anniston Alabama needs the flexibility afforded by this indefinite delivery requirements type contract to be able to order a CLIN or a combination of CLINs in the quantity(ies) required to satisfy customer requirements as they materialize.

Offeror Question 2:

Solicitation posted at FedBizOpps does not include the drawings required for CLINs X0010 (Wood Base for COEI), CLINs X0011 (Weapon Skid Kits) and X0012 (Chock Blocks).

Government Answer 2:

The drawings have been added via Amendment 0001 as Attachment 3.

Offeror Question 3:

Can you use any non-wood lumber for these applications?

Government Answer 3:

No. This requirement is for wood lumber. Small business offerors are invited to contact the DLA Distribution Small Business Specialist, Ms. Cathy Hampton (cathy.hampton@dla.mil) if they would like to discuss potential future requirements that could be met with non-wood lumber.

Offeror Question 4:

Regarding various “Wood Cleated Panelboard Shipping Boxes” CLIN 0001 , 0002, 0003, 0004, 0005, Would you please send me the technical drawings for these ?

Government Answer 4:

The drawings have been added via Amendment 0001 as Attachment 3. For the CLINs which identify compliance with an ASTM standard, the ASTM standard along with the CLIN description will provide the technical information required by the Contractor for fabrication. The Contractor is responsible for obtaining the technical standards developed and published by ASTM International. ASTM International's website is http://www.astm.org/.

Offeror Question 5:

What is Panelboard?

Government Answer 5:

This is defined in the ASTM standard. ASTM International's website is http://www.astm.org/ Offeror Question 6:

Regarding various “Wood Boxes” CLIN 0006, 0007, 0008, 0009, Would you please send me the technical drawings for these?

Government Answer 6:

The drawings have been added via Amendment 0001 as Attachment 3. For the CLINs which identify compliance with an ASTM standard, the ASTM standard along with the CLIN description will provide the technical information required by the Contractor for fabrication. The Contractor is responsible for obtaining the technical standards developed and published by ASTM International. ASTM International's website is http://www.astm.org/.

Offeror Question 7:

Regarding CLIN 0010, 0012 . Would you please send me the technical drawings for these ?

Government Answer 7:

The drawings have been added via Amendment 0001 as Attachment 3. For the CLINs which identify compliance with an ASTM standard, the ASTM standard along with the CLIN description will provide the technical information required by the Contractor for fabrication. The Contractor is responsible for obtaining the technical standards developed and published by ASTM International. ASTM International's website is http://www.astm.org/.

Offeror Question 8:

Regarding your description for CLIN 0011, please be advised that you have made an error in your description.

Those Weapons Skid Kits require a 19 / 32” thickness plywood sheathing , not the 18 /32” thickness advertized.

Government Answer 8:

The size has been changed FROM 48 inch x 48 inch of 18/32 inch grade C/D or CDX plywood sheathing TO 48 inch x 48 inch of 3/4 inch grade C/D or CDX plywood sheathing via Amendment 0001.

Offeror Question 9:

Do we have to bid on all items or can we bid selectively on just certain items?

Government Answer 9:

In accordance with Addendum to FAR 52.212-1 Instructions to Offerors, Offeror Submission Instructions, pg 96 of the solicitation, Offerors will be required to propose on the entire requirement specified in Section B (SCHEDULE OF SUPPLIES/SERVICES) of the solicitation and demonstrate they can meet the technical requirements in order to be considered for award under this acquisition.

Offeror Question 10:

With the solicitation close date of 10-11-11 what would you anticipate as the actual contract award date?

Government Answer 10:

The Government anticipates contract award prior to the projected period of performance start date of December 1, 2011 (reference page 3 of the solicitation).

Offeror Question 11:

Each item for the base year has a stated delivery date of 11-30-2012 in the solicitation. For whomever is awarded the contract will there be at least an approximate delivery schedule established for each item so that materials purchasing and production scheduling can be more orderly planned out?

Government Answer 11:

This solicitation will result in Indefinite Delivery / Indefinite Quantity contract. As such, delivery orders will be placed against the contract that specifies the exact delivery dates for each order.

Offeror Question 12:

For pricing as “firm fixed price” is there any price adjustment provision for extraordinary cost escalation?

For example, if there are deliveries for Aug. – Oct 2012 (the prime hurricane season in every year) plywood can double in price wherever hurricanes are likely to strike .

Government Answer 12:

No; there is no such provision in the solicitation or planned for the resultant contract.

Offeror Question 13:

Can we quote our item costs for anything other than shipping terms “FOB Destination” (Anniston, AL)?

Government Answer 13:

No; all items must be quoted FOB Destination.

Offeror Question 14:

Item # 0005 (8115-N00001426 starting on solicitation page 9) - It’s unclear whether we are quoting on 200 crates (with ID’s of 94.5” x 94.5” x 6.25” ) as per the middle of page 10 OR that plus all of the wood boxes and other items listed on page 9.

Government Answer 14:

These are two separate items. CLIN 0005 (WOOD-CLEATED PANELBOARD SHIPPING BOXES, STOCK NUMBER:

8115-00-L11-0045, SUPPLY/SERVICE: 8115-N00001427) has an estimated quantity of 200. CLIN 0004 (WOOD-CLEATED PANELBOARD SHIPPING BOXES, STOCK NUMBER: 8115-00-L11-0044, SUPPLY/SERVICE: 8115-N00001426) has an estimated quantity of 20.

Offeror Question 15:

On page 98 of the solicitation, item (4) states there is a questionnaire to be completed by customers and submitted to the Contract Specialist. It states the offeror/major subcontractor shall complete Part I of Attachment 2 prior to submitting the questionnaire to the customer. I do not see Part I of the questionnaire….

Government Answer 15:

Item (4) has been revised to eliminate the sentence referring to Part I of the questionnaire.

Offeror Question 16:

Please provide clarification on "preservative treatment A (without water-repellant wood preservative)" - is this the "3-dip" chemical process as is sometimes used with ammo crates, or does a standard ISPM-15 compliant wood product meets this requirement without any additional treatment?

Government Answer 16:

This treatment is "no preservative" other than the natural preservative used in the plywood manufacturing.

Offeror Question 17:

What is the plywood thickness and ply requirements for the wooden crates?

Government Answer 17:

The technical requirements are provided in the Contract Line Item Numbers (CLINs) of Attachment 1 - Schedule of Supplies.

Offeror Question 18:

How is the base for the crates assembled? Is it a stringer configuration, block pallet or is the base built like the top?

Government Answer 18:

The technical requirements are provided in the Contract Line Item Numbers (CLINs) of Attachment 1 - Schedule of Supplies.

Offeror Question 19:

We’re assuming the crate style is standard, if not, can you pass along any information regarding this?

Government Answer 19:

The technical requirements are provided in the Contract Line Item Numbers (CLINs) of Attachment 1 - Schedule of Supplies.

Offeror Question 20:

Clins 0005 thru 0009 does not list a Mil Spec reference. It appears the CO references a Style 2 with no Mil spec reference. Are we to assume these are D6251-07 Cleated Crates All Style A, Type III, Class 2 crates?

Government Answer 20:

Please refer to the revised Section B in Amendment 0001 which mirrors the Section B provided in Attachment 1.

Offeror Question 21:

In the solicitation, "Item description" for line 0003 starts on page 6 and page 7, and the description for line 0004 drops in immediately, even before the info giving the quantity, Unit of Issue, and terms for line 0003. Also, when the next "Item description" begins, the same "size" data is given for item 0004 as was given for item 0003. Immediately following that comes the data for line 0004 again. Items 0005 through items 0012 have similar issues with multiple data repeated each time. This is very confusing… Government Answer 21:

Please refer to the revised Section B in Amendment 0001 which mirrors the Section B provided in Attachment 1.

Modified Clauses

List of Attachments

Description File Name Attachment 3 Technical Drawings

Attachment 3 - Technical Drawings.pdf

Attachment 1 Schedule of Supplies/Service Conformed thru Amendment 0001

Attachment 1_Schedule of Supplies_Conformed thru Amendment 0001.xls

Section B

CLIN DESCRIPTION ESTIMATED U/I UNIT ESTIMATED

QUANTITY PRICE TOTAL

BASE YEAR PERIOD

0001 STOCK NUMBER: 8115-00-L11-0041 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 87 INCH LENGTH X 49 INCH WIDTH X 15.5 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD)

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 100 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

0001AA QUANTITY: 1-10 EA $0.00

0001AB QUANTITY: 11-20 EA $0.00

0002 STOCK NUMBER: 8115-00-L11-0042 30 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 32.5 INCH LENGTH X 14 INCH WIDTH X 11.25 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD)

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 110 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

0002AA QUANTITY: 1-10 EA $0.00

0002AB QUANTITY: 11-20 EA $0.00

0002AC QUANTITY: 21-30 EA $0.00

0003 STOCK NUMBER: 8115-00-L11-0043 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 63.25 INCH LENGTH X 25 INCH WIDTH X 20 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 135LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTMD 6251-07 AND CURRENT CHANGES APPLY

0003AA QUANTITY: 1-10 EA $0.00

0003AB QUANTITY: 11-20 EA $0.00

0004 STOCK NUMBER: 8115-00-L11-0044 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 45 INCH LENGTH X 21 INCH WIDTH X 23 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 (DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 100 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

0004AA QUANTITY: 1-10 EA $0.00

0004AB QUANTITY: 11-20 EA $0.00

0005 STOCK NUMBER: 8115-00-L11-0045 200 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 (DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 1000 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF

THE BOX MAY BE SOLID WOOD CONSTRUCTION.

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

0005AA QUANTITY: 1-100 EA $0.00

0005AB QUANTITY: 101-200 EA $0.00

0006 STOCK NUMBER: 8115-00-L11-0046 400 EA $0.00 $0.00

WOOD BOXES

SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 200 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

0006AA QUANTITY: 1-100 EA $0.00

0006AB QUANTITY: 101-200 EA $0.00

0006AC QUANTITY: 201-300 EA $0.00

0006AD QUANTITY: 301-400 EA $0.00

0007 STOCK NUMBER: 8115-00-L11-0047 100 EA $0.00 $0.00

WOOD BOXES

SIZE: 101 INCH LENGTH X 30.5 INCH WIDTH X 26 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 500 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

0007AA QUANTITY: 1-50 EA $0.00

0007AB QUANTITY: 51-100 EA $0.00

0008 STOCK NUMBER: 8115-00-L11-0048 500 EA $0.00 $0.00

WOOD BOXES

SIZE: 23.5 INCH LENGTH X 20 INCH WIDTH X 16 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 185LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

0008AA QUANTITY: 1-100 EA $0.00

0008AB QUANTITY: 101-200 EA $0.00

0008AC QUANTITY: 201-300 EA $0.00

0008AD QUANTITY: 301-400 EA $0.00

0008AE QUANTITY: 401-500 EA $0.00

0009 STOCK NUMBER: 8115-00-L11-0049 100 EA $0.00 $0.00

WOOD BOXES

SIZE: 89 INCH LENGTH X 12.5 INCH WIDTH X 20 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 500 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SHIPPED ASSEMBLED

SKIDS ARE REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

0009AA QUANTITY: 1-50 EA $0.00

0009AB QUANTITY: 51-100 EA $0.00

0010 STOCK NUMBER: 8115-00-L11-0050 400 EA $0.00 $0.00

WOOD BASE FOR COEI (COMPONENT OF END ITEM)

SIZE: 32 INCH LENGTH X 20 INCH WIDTH

PLYWOOD COMMERCIAL GRADE, 3/4 INCH

SIZE: 3 INCH X 4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE

PLYWOOD.

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS

THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15 CERTIFICATION.

ALL DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK.

DRAWING ATTACHED

0010AA QUANTITY: 1-100 EA $0.00

0010AB QUANTITY: 101-200 EA $0.00

0010AC QUANTITY: 201-300 EA $0.00

0010AD QUANTITY: 301-400 EA $0.00

0011 STOCK NUMBER: 8115-00-L11-0051 6,000 KT $0.00 $0.00

WEAPON SKID KITS

SIZE: 48 INCH X 48 INCH PIECE OF 3/4 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND

4 INCH X 4 INCH X 48 INCH PINE SKID NAILED TO THE SHEATHING.

THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH KIT

(NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE MARKED WITH THE ISPM-15 CERTIFICAITON.

ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP.

NOTE: ALL LUMBER SIZES ARE "NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO

AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES OF THE ASSEMBLED SKID

KIT.

THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE

PROVIDED AS SUCH, HOWEVER THE LENGTH AND WIDTH OF THE PLYWOOD SHEATHING MAY

BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY.

DRAWING ATTACHED

0011AA QUANTITY: 1-1,000 EA $0.00

0011AB QUANTITY: 1,001-2,000 EA $0.00

0011AC QUANTITY: 2,001-3,000 EA $0.00

0011AD QUANTITY: 3,001-4,000 EA $0.00

0011AE QUANTITY: 4,001-5,000 EA $0.00

0011AF QUANTITY: 5,001-6,000 EA $0.00

0012 STOCK NUMBER: 8115-00-L11-0052 3,600 EA $0.00 $0.00

CHOCK BLOCKS

SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH RO UGH PINE BLOCK

WOODEN BLOCK CUT THRUGH THE CENTERLINE AT A 45 DEGREE ANGLE.

THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED.

THE WOOD SHALL BE FREE OF SPLITS, WARP, WANE AND BARK.

DRAWING ATTACHED

0012AA QUANTITY: 1-1,200 EA $0.00

0012AB QUANTITY: 1,201-2,400 EA $0.00

0012AC QUANTITY: 2,401-3,600 EA $0.00

0013 Material number 8115N00001492 w/NAICS 321920 60 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK14369144 Notes B1.1 and B1.2 on Page 5 of the SPI apply Contents approximately 325 lbs.

0013AA QUANTITY: 1-20 EA $0.00

0013AB QUANTITY: 21-40 EA $0.00

0013AC QUANTITY: 41-60 EA $0.00

0014 Material number 8115N00001493 w/NAICS 321920 500 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK13192899 Steps 2C, 3D and notes in the SPI apply Do not secure item 4 to container Contents approximately 120 lbs.

0014AA QUANTITY: 1-100 EA $0.00

0014AB QUANTITY: 101-200 EA $0.00

0014AC QUANTITY: 201-300 EA $0.00

0014AD QUANTITY: 301-400 EA $0.00

0014AE QUANTITY: 401-500 EA $0.00

0015 Material number 8115N00001494 w/NAICS 321920 390 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK10656297 Provide Item Numbers 8-18 Box or bag hardware inside Item Number 18 Contents approximately 300 lbs

0015AA QUANTITY: 1-100 EA $0.00

0015AB QUANTITY: 101-200 EA $0.00

0015AC QUANTITY: 201-300 EA $0.00

0015AD QUANTITY: 301-390 EA $0.00

0016 Material number 8115N00001495 w/NAICS 321920 100 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AM12325505 Provide Item Numbers 2,4,5,10,11,12,13, and 14 Box or bag hardware inside Item Number 14 Contents approximately 1500 lbs.

0016AA QUANTITY: 1-50 EA $0.00

0016AB QUANTITY: 51-100 EA $0.00

0017 Material number 8115N00001496 w/NAICS 321920 275 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK12937513 Steps 2-C, 3-D, 7H and 9 in the SPI apply Contents approximately 200 lbs.

0017AA QUANTITY: 1-150 EA $0.00

0017AB QUANTITY: 151-275 EA $0.00

0018 Material number 8115N00001497 w/NAICS 321920 400 EA $0.00 $0.00 Wood-Cleated Panelboard Shipping Boxes Size: 28 inch length x 24 inch width x 22 inch depth (inside dimensions) Type III, Class 2, Style I Contents approximately 175 lbs.

ASTM D6251/D6251M-11 and current changes apply

0018AA QUANTITY: 1-100 EA $0.00

0018AB QUANTITY: 101-200 EA $0.00

0018AC QUANTITY: 201-300 EA $0.00

0018AD QUANTITY: 301-400 EA $0.00

0019 Material number 8115N00001498 w/NAICS 321920 80 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AM11578503 Provide Item Number 15 Contents approximately 777 lbs.

0019AA QUANTITY: 1-40 EA $0.00

0019AB QUANTITY: 41-80 EA $0.00

NOTE: CLINs 0013 and 0019 do not have option periods $0.00Base Year Estimated Total

OPTION YEAR 1 PERIOD

1001 STOCK NUMBER: 8115-00-L11-0041 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 87 INCH LENGTH X 49 INCH WIDTH X 15.5 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD)

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 100 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

1001AA QUANTITY: 1-10 EA $0.00

1001AB QUANTITY: 11-20 EA $0.00

1002 STOCK NUMBER: 8115-00-L11-0042 30 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 32.5 INCH LENGTH X 14 INCH WIDTH X 11.25 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD)

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 110 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

1002AA QUANTITY: 1-10 EA $0.00

1002AB QUANTITY: 11-20 EA $0.00

1002AC QUANTITY: 21-30 EA $0.00

1003 STOCK NUMBER: 8115-00-L11-0043 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 63.25 INCH LENGTH X 25 INCH WIDTH X 20 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 135LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTMD 6251-07 AND CURRENT CHANGES APPLY

1003AA QUANTITY: 1-10 EA $0.00

1003AB QUANTITY: 11-20 EA $0.00

1004 STOCK NUMBER: 8115-00-L11-0044 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 45 INCH LENGTH X 21 INCH WIDTH X 23 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 (DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 100 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

1004AA QUANTITY: 1-10 EA $0.00

1004AB QUANTITY: 11-20 EA $0.00

1005 STOCK NUMBER: 8115-00-L11-0045 200 EA $0.00 $0.00

SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 (DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 1000 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF

THE BOX MAY BE SOLID WOOD CONSTRUCTION.

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

1005AA QUANTITY: 1-100 EA $0.00

1005AB QUANTITY: 101-200 EA $0.00

1006 STOCK NUMBER: 8115-00-L11-0046 400 EA $0.00 $0.00

WOOD BOXES

SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 200 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

1006AA QUANTITY: 1-100 EA $0.00

1006AB QUANTITY: 101-200 EA $0.00

1006AC QUANTITY: 201-300 EA $0.00

1006AD QUANTITY: 301-400 EA $0.00

1007 STOCK NUMBER: 8115-00-L11-0047 100 EA $0.00 $0.00

WOOD BOXES

SIZE: 101 INCH LENGTH X 30.5 INCH WIDTH X 26 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 500 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

1007AA QUANTITY: 1-50 EA $0.00

1007AB QUANTITY: 51-100 EA $0.00

1008 STOCK NUMBER: 8115-00-L11-0048 500 EA $0.00 $0.00

WOOD BOXES

SIZE: 23.5 INCH LENGTH X 20 INCH WIDTH X 16 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 185LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

1008AA QUANTITY: 1-100 EA $0.00

1008AB QUANTITY: 101-200 EA $0.00

1008AC QUANTITY: 201-300 EA $0.00

1008AD QUANTITY: 301-400 EA $0.00

1008AE QUANTITY: 401-500 EA $0.00

1009 STOCK NUMBER: 8115-00-L11-0049 100 EA $0.00 $0.00

WOOD BOXES

SIZE: 89 INCH LENGTH X 12.5 INCH WIDTH X 20 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 500 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SHIPPED ASSEMBLED

SKIDS ARE REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

1009AA QUANTITY: 1-50 EA $0.00

1009AB QUANTITY: 51-100 EA $0.00

1010 STOCK NUMBER: 8115-00-L11-0050 400 EA $0.00 $0.00

SIZE: 32 INCH LENGTH X 20 INCH WIDTH

PLYWOOD COMMERCIAL GRADE, 3/4 INCH

SIZE: 3 INCH X 4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE

PLYWOOD.

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS

THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15 CERTIFICATION.

ALL DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK.

DRAWING ATTACHED

1010AA QUANTITY: 1-100 EA $0.00

1010AB QUANTITY: 101-200 EA $0.00

1010AC QUANTITY: 201-300 EA $0.00

1010AD QUANTITY: 301-400 EA $0.00

1011 STOCK NUMBER: 8115-00-L11-0051 6,000 KT $0.00 $0.00

WEAPON SKID KITS

SIZE: 48 INCH X 48 INCH PIECE OF 3/4 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND

4 INCH X 4 INCH X 48 INCH PINE SKID NAILED TO THE SHEATHING.

THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH KIT

(NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE MARKED WITH THE ISPM-15 CERTIFICAITON.

ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP.

NOTE: ALL LUMBER SIZES ARE "NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO

AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES OF THE ASSEMBLED SKID

KIT.

THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE

PROVIDED AS SUCH, HOWEVER THE LENGTH AND WIDTH OF THE PLYWOOD SHEATHING MAY

BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY.

DRAWING ATTACHED

1011AA QUANTITY: 1-1,000 EA $0.00

1011AB QUANTITY: 1,001-2,000 EA $0.00

1011AC QUANTITY: 2,001-3,000 EA $0.00

1011AD QUANTITY: 3,001-4,000 EA $0.00

1011AE QUANTITY: 4,001-5,000 EA $0.00

1011AF QUANTITY: 5,001-6,000 EA $0.00

1012 STOCK NUMBER: 8115-00-L11-0052 3,600 EA $0.00 $0.00

CHOCK BLOCKS

SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH RO UGH PINE BLOCK

WOODEN BLOCK CUT THRUGH THE CENTERLINE AT A 45 DEGREE ANGLE.

THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED.

THE WOOD SHALL BE FREE OF SPLITS, WARP, WANE AND BARK.

DRAWING ATTACHED

1012AA QUANTITY: 1-1,200 EA $0.00

1012AB QUANTITY: 1,201-2,400 EA $0.00

1012AC QUANTITY: 2,401-3,600 EA $0.00

1014 Material number 8115N00001493 w/NAICS 321920 400 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK13192899 Steps 2C, 3D and notes in the SPI apply Do not secure item 4 to container Contents approximately 120 lbs.

1014AA QUANTITY: 1-100 EA $0.00

1014AB QUANTITY: 101-200 EA $0.00

1014AC QUANTITY: 201-300 EA $0.00

1014AD QUANTITY: 301-400 EA $0.00

1015 Material number 8115N00001494 w/NAICS 321920 150 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK10656297 Provide Item Numbers 8-18 Box or bag hardware inside Item Number 18 Contents approximately 300 lbs

1015AA QUANTITY: 1-75 EA $0.00

1015AB QUANTITY: 76-150 EA $0.00

1016 Material number 8115N00001495 w/NAICS 321920 50 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AM12325505 Provide Item Numbers 2,4,5,10,11,12,13, and 14 Box or bag hardware inside Item Number 14 Contents approximately 1500 lbs.

1016AA QUANTITY: 1-25 EA $0.00

1016AB QUANTITY: 26-50 EA $0.00

1017 Material number 8115N00001496 w/NAICS 321920 200 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK12937513 Steps 2-C, 3-D, 7H and 9 in the SPI apply Contents approximately 200 lbs.

1017AA QUANTITY: 1-100 EA $0.00

1017AB QUANTITY: 101-200 EA $0.00

1018 Material number 8115N00001497 w/NAICS 321920 300 EA $0.00 $0.00 Wood-Cleated Panelboard Shipping Boxes Size: 28 inch length x 24 inch width x 22 inch depth (inside dimensions) Type III, Class 2, Style I Contents approximately 175 lbs.

ASTM D6251/D6251M-11 and current changes apply

1018AA QUANTITY: 1-100 EA $0.00

1018AB QUANTITY: 101-200 EA $0.00

1018AC QUANTITY: 201-300 EA $0.00

NOTE: CLINs 0013 and 0019 do not have option periods $0.00Option Year 1 Estimated Total

OPTION YEAR 2 PERIOD

2001 STOCK NUMBER: 8115-00-L11-0041 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 87 INCH LENGTH X 49 INCH WIDTH X 15.5 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD)

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 100 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

2001AA QUANTITY: 1-10 EA $0.00

2001AB QUANTITY: 11-20 EA $0.00

2002 STOCK NUMBER: 8115-00-L11-0042 30 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 32.5 INCH LENGTH X 14 INCH WIDTH X 11.25 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD)

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 110 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

2002AA QUANTITY: 1-10 EA $0.00

2002AB QUANTITY: 11-20 EA $0.00

2002AC QUANTITY: 21-30 EA $0.00

2003 STOCK NUMBER: 8115-00-L11-0043 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 63.25 INCH LENGTH X 25 INCH WIDTH X 20 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 ( DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 135LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTMD 6251-07 AND CURRENT CHANGES APPLY

2003AA QUANTITY: 1-10 EA $0.00

2003AB QUANTITY: 11-20 EA $0.00

2004 STOCK NUMBER: 8115-00-L11-0044 20 EA $0.00 $0.00

WOOD-CLEATED PANELBOARD SHIPPING BOXES

SIZE: 45 INCH LENGTH X 21 INCH WIDTH X 23 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 (DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 100 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

2004AA QUANTITY: 1-10 EA $0.00

2004AB QUANTITY: 11-20 EA $0.00

2005 STOCK NUMBER: 8115-00-L11-0045 200 EA $0.00 $0.00

SIZE: 94.5 INCH LENGTH X 94.5 INCH WIDTH X 6 1/4 INCH DEPTH (INSIDE DIMENSIONS)

TYPE: III (PLYWOOD )

CLASS: 2 (OVERSEAS)

STYLE: A (STANDARD BOX CORNER)

PRESERVATIVE TREATMENT: A (WITHOUT WATER-REPELLENT WOOD PRESERVATIVE)

LOAD: TYPE 3 (DIFFICULT )

CLEAT AND SKID LUMBER QUALITY SHALL BE PER ASTM D6251-07 PARAGRAPH 6.3

CONTENTS APPROXIMATELY 1000 LBS.

CONTAINER MANUFACTURER'S IDENTIFICATION IS REQUIRED.

SHIPPED ASSEMBLED

STRAPPING NOT REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED, EXCEPT THAT THE SIDES OF

THE BOX MAY BE SOLID WOOD CONSTRUCTION.

ALTERNATE FASTENING SYSTEMS NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6251-07 AND CURRENT CHANGES APPLY

2005AA QUANTITY: 1-100 EA $0.00

2005AB QUANTITY: 101-200 EA $0.00

2006 STOCK NUMBER: 8115-00-L11-0046 400 EA $0.00 $0.00

WOOD BOXES

SIZE: 15 INCH LENGTH X 15 INCH WIDTH X 19 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 200 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

2006AA QUANTITY: 1-100 EA $0.00

2006AB QUANTITY: 101-200 EA $0.00

2006AC QUANTITY: 201-300 EA $0.00

2006AD QUANTITY: 301-400 EA $0.00

2007 STOCK NUMBER: 8115-00-L11-0047 100 EA $0.00 $0.00

WOOD BOXES

SIZE: 101 INCH LENGTH X 30.5 INCH WIDTH X 26 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 500 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

2007AA QUANTITY: 1-50 EA $0.00

2007AB QUANTITY: 51-100 EA $0.00

2008 STOCK NUMBER: 8115-00-L11-0048 500 EA $0.00 $0.00

WOOD BOXES

SIZE: 23.5 INCH LENGTH X 20 INCH WIDTH X 16 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 185LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SKIDS ARE REQUIRED

SHIPPED ASSEMBLED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

2008AA QUANTITY: 1-100 EA $0.00

2008AB QUANTITY: 101-200 EA $0.00

2008AC QUANTITY: 201-300 EA $0.00

2008AD QUANTITY: 301-400 EA $0.00

2008AE QUANTITY: 401-500 EA $0.00

2009 STOCK NUMBER: 8115-00-L11-0049 100 EA $0.00 $0.00

WOOD BOXES

SIZE: 89 INCH LENGTH X 12.5 INCH WIDTH X 20 INCH DEPTH (INSIDE DIMENSIONS)

CLASS: 2 (HEAVY DUTY)

STYLE: 2 (FULL CLEATED ENDS, BUTT JOINTS)

TREATMENT: A ( WITHOUT TREATMENT)

CONTENTS APPROXIMATELY 500 LBS.

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

SHIPPED ASSEMBLED

SKIDS ARE REQUIRED

ALTERNATE MATERIALS & CONSTRUCTION NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

ASTM D6880-05 AND CURRENT CHANGES APPLY

2009AA QUANTITY: 1-50 EA $0.00

2009AB QUANTITY: 51-100 EA $0.00

2010 STOCK NUMBER: 8115-00-L11-0050 400 EA $0.00 $0.00

SIZE: 32 INCH LENGTH X 20 INCH WIDTH

PLYWOOD COMMERCIAL GRADE, 3/4 INCH

SIZE: 3 INCH X 4 INCH X 20 INCH NOMINAL, PINE SKIDS, 2" BEVEL EACH END, NAILED TO THE

PLYWOOD.

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS

THE OUTER SKIDS MUST BE VISIBLY MARKED WITH THE ISPM-15 CERTIFICATION.

ALL DUNNAGE MUST BE MARKED WITH THE ISPM-15 DUNNAGE MARK.

DRAWING ATTACHED

2010AA QUANTITY: 1-100 EA $0.00

2010AB QUANTITY: 101-200 EA $0.00

2010AC QUANTITY: 201-300 EA $0.00

2010AD QUANTITY: 301-400 EA $0.00

2011 STOCK NUMBER: 8115-00-L11-0051 6,000 KT $0.00 $0.00

WEAPON SKID KITS

SIZE: 48 INCH X 48 INCH PIECE OF 3/4 INCH GRADE C/D OR CDX PLYWOOD SHEATHING AND

4 INCH X 4 INCH X 48 INCH PINE SKID NAILED TO THE SHEATHING.

THERE WILL BE 4 EACH 2 INCH X 4 INCH X 22 INCH PINE DUNNAGE INCLUDED WITH EACH KIT

(NO. 3 PINE).

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL LUMBER MUST BE HEAT TREATED PER ISPM-15 REQUIREMENTS.

THE OUTER SKIDS MUST BE MARKED WITH THE ISPM-15 CERTIFICAITON.

ALL DUNNAGE MUST BE STAMPED WITH THE ISPM-15 DUNNAGE STAMP.

NOTE: ALL LUMBER SIZES ARE "NOMINAL" HOWEVER, THE PINE SKIDS MAY BE PLUS ZERO

AND MINUS 1/2 INCH AND SHALL NOT PROTRUDE PAST THE EDGES OF THE ASSEMBLED SKID

KIT.

THE PLYWOOD THICKNESS IS A COMMON COMMERCIAL DESCRIPTION AND SHOULD BE

PROVIDED AS SUCH, HOWEVER THE LENGTH AND WIDTH OF THE PLYWOOD SHEATHING MAY

BE 1/2 INCH PLUS OR MINUS, SO LONG AS IT COMPLIES WITH THE STATEMENT ABOVE AFTER

ASSEMBLY.

DRAWING ATTACHED

2011AA QUANTITY: 1-1,000 EA $0.00

2011AB QUANTITY: 1,001-2,000 EA $0.00

2011AC QUANTITY: 2,001-3,000 EA $0.00

2011AD QUANTITY: 3,001-4,000 EA $0.00

2011AE QUANTITY: 4,001-5,000 EA $0.00

2011AF QUANTITY: 5,001-6,000 EA $0.00

2012 STOCK NUMBER: 8115-00-L11-0052 3,600 EA $0.00 $0.00

CHOCK BLOCKS

SIZE: 6 INCH WIDTH X 8 INCH HEIGHT X 17 INCH LENGTH RO UGH PINE BLOCK

WOODEN BLOCK CUT THRUGH THE CENTERLINE AT A 45 DEGREE ANGLE.

THIS PRODUCES 2 EACH CHOCKS OF EQUAL FINISHED SIZE

ALTERNATE MATERIALS AND CONSTRUCTION NOT ALLOWED

ALL WOOD SHALL MEET THE REQUIREMENTS OF ISPM-15, INCLUDING MARKINGS.

THE WOOD SHALL BE ROUGH CUT PINE HEAT TREATED.

THE WOOD SHALL BE FREE OF SPLITS, WARP, WANE AND BARK.

DRAWING ATTACHED

2012AA QUANTITY: 1-1,200 EA $0.00

2012AB QUANTITY: 1,201-2,400 EA $0.00

2012AC QUANTITY: 2,401-3,600 EA $0.00

2014 Material number 8115N00001493 w/NAICS 321920 400 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK13192899 Steps 2C, 3D and notes in the SPI apply Do not secure item 4 to container Contents approximately 120 lbs.

2014AA QUANTITY: 1-100 EA $0.00

2014AB QUANTITY: 101-200 EA $0.00

2014AC QUANTITY: 201-300 EA $0.00

2014AD QUANTITY: 301-400 EA $0.00

2015 Material number 8115N00001494 w/NAICS 321920 150 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK10656297 Provide Item Numbers 8-18 Box or bag hardware inside Item Number 18 Contents approximately 300 lbs

2015AA QUANTITY: 1-75 EA $0.00

2015AB QUANTITY: 76-150 EA $0.00

2016 Material number 8115N00001495 w/NAICS 321920 50 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AM12325505 Provide Item Numbers 2,4,5,10,11,12,13, and 14 Box or bag hardware inside Item Number 14 Contents approximately 1500 lbs.

2016AA QUANTITY: 1-25 EA $0.00

2016AB QUANTITY: 26-50 EA $0.00

2017 Material number 8115N00001496 w/NAICS 321920 200 EA $0.00 $0.00 Special Packaging Instruction (SPI) Container constructed in accordance with SPI No. AK12937513 Steps 2-C, 3-D, 7H and 9 in the SPI apply Contents approximately 200 lbs.

2017AA QUANTITY: 1-100 EA $0.00

2017AB QUANTITY: 101-200 EA $0.00

2018 Material number 8115N00001497 w/NAICS 321920 300 EA $0.00 $0.00 Wood-Cleated Panelboard Shipping Boxes Size: 28 inch length x 24 inch width x 22 inch depth (inside dimensions) Type III, Class 2, Style I Contents approximately 175 lbs.

ASTM D6251/D6251M-11 and current changes apply

2018AA QUANTITY: 1-100 EA $0.00

2018AB QUANTITY: 101-200 EA $0.00

2018AC QUANTITY: 201-300 EA $0.00

NOTE: CLINs 0013 and 0019 do not have option periods $0.00

Total Estimated Contract Value $0.00

Option Year 2 Estimated Total

ADDENDUM TO 52.212-01 INSTRUCTIONS TO OFFERORS - COMMERCIAL ITEMS

Reference paragraph (c) under referenced provision FAR 52.212-1. This paragraph is tailored to read as follows:

Period of acceptance of offers. The offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers.

The following paragraph under referenced provision 52.212-1 is hereby deleted:

Multiple offers Multiple awards

OFFER SUBMISSION INSTRUCTIONS:

This section provides guidance for preparing the proposal as well as specific instructions on the format and content of the proposal. The offeror’s proposal shall include all data and information requested herein and shall be submitted in accordance with these instructions. All required elements of the Request for Proposal (RFP) shall be submitted by the offeror with their proposal no later than the date/time shown in Block 8 of the Standard Form 1449, Solicitation/Contract/Order for Commercial Items.

Offerors must submit hard copies only of their proposal in three volumes or sections (if submitted in sections, proposal shall include an appropriately marked tab for each section) and shall include one (1) hard copy of Volume I, two (2) hard copies of Volume II and one (1) hard copy of Volume III as listed below. All of these volumes must be separately bound or sectioned. No price information shall be included in the non-cost factors proposal (Volume II and III).

Offerors are responsible for including sufficient details to permit a complete and accurate evaluation of each proposal.

Offerors will be required to propose on the entire requirement specified in Section B (SCHEDULE OF SUPPLIES/SERVICES) of the solicitation and demonstrate they can meet the technical requirements in order to be considered for award under this acquisition.

All three (3) volumes shall have the following statement in the footer of every page submitted, “SOURCE

SELECTION SENSITIVE INFORMATION – SEE FAR 2.101 & 3.104.”

Submission of a proposal that does not contain all items requested below may result in elimination from consideration for award.

Volume I (Hard Copy Mailed):

Signed and dated Standard Form (SF)1449 with all required fill-ins completed.

Completed Schedule of Supplies/Services for base year and options years, Attachment 1 to the solicitation in hard copy format. Prices must be rounded to two decimal points.

Offeror’s proposed delivery schedule per FAR 52.211-9 Desired and Required Time of Delivery (Jun 1997) on page 5, if applicable.

Completed certifications and representations located at FAR 52.212-3 (APR 2011) and DFARS 252.212-7000 (Jun 2005) OR offeror statement indicating that said certifications and representations are current and located in the ORCA database which can be found at https://orca.bpn.gov/.

Signed Standard Form 30, Amendment of Solicitation/Modification of Contract for all amendments, if applicable.

18 20

One electronic copy of the completed Schedule of Supplies and Services for Base Year and Option Years in EXCEL file Workbook format provided with this solicitation.

Notes:

a. Unit prices SHALL be rounded to 2 decimal points only.

b. EXCEL spreadsheets contain formulas for calculating the total estimated price per CLIN/SUBCLIN, the total estimated price per year, and the total estimated price of the contract. Offeror is to complete the unit price column only for each SUBCLIN for each contract year. These are highlighted yellow in Attachment 1. All other cells will calculate automatically and have been locked to avoid errant data entry.

Volume II:

Technical Proposal: The Offeror shall provide the following information (including any descriptive literature) which demonstrates that the Offeror clearly and fully understands and meets the minimum technical requirements necessary to manufacture and deliver the wood products required by this solicitation.

The Offeror must clearly discuss how they will comply with the International Standards for Phytosanitary Measures Publication No. 15 (ISPM 15): Guidelines for Regulating Wood Packaging Material in International Trade for the manufacture of wood products described in the Schedule of Supplies/Services, Attachment 1.

The Offeror must clearly discuss how they will process Government delivery orders and meet contract delivery timeframes.

The Offeror must clearly discuss their plan to maintain quality control at each of…