13-R-0324_Amd_0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO.

See Block 14

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE SPE601 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE FACILITY CODE

SPE60113R0324

X

2013 JUL 12

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of OffersX is extended, X is not extended.

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

12. ACCOUNTING AND APPROPRIATION DATA (If required)

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A NAME AND TITLE OF SIGNER (Type or print)

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

16B. UNITED STATES OF AMERICA15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

(a) By completing Items 8 and 15, and returning

DLA ENERGY AEROSPACE ENRGY-DLAE-M

BLDG 1621

1014 BILLY MITCHELL BLVD

SAN ANTONIO TX 78226

15C. DATE SIGNED 16C. DATE SIGNED

D. OTHER (Specify type of modification and authority)

3. EFFECTIVE DATE

See Attached Continuation Sheet(s).

(X)

CHECK ONE

PAGE OF PAGES

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CONTINUED ON NEXT PAGE

1.The purpose of this amendment is to add one clause to Attachment 1 - Aerospace Energy Clauses, correct the date information in clause 252.216-7006 ORDERING (MAY 2011) DFARS, and to add the allocation of cost instructions for proposals.

2. The following clause is hereby added to the solicitation in Attachment 1- Aerospace Energy Clauses:

D0004 D14 DRUM REQUIREMENTS (AEROSPACE ENERGY) (DLA ENERGY APR 2006)

(a) Drums shall be 55-gallon capacity steel drums meeting, as a minimum, the Performance-Oriented Packaging (POP) wall thickness and testing criteria for the UN 1A1 specification packaging of Packing Group (PG) III hazardous materials, as specified in Title 49 of the Code of Federal Regulations (49 CFR).

(b) Drums shall meet the following specifications:

(1) The interior of the drums shall be lined with epoxy coating conforming to MIL-PRF-4556.

(2) The exterior of the drums shall be phosphatized.

(3) Bungs need not be painted.

(4) Cap seals shall be applied to each bung and vent closure prior to shipment.

3. Clause 252.216-7006 ORDERING (MAY 2011) DFARS is hereby corrected to read as follows:

252.216-7006 ORDERING (MAY 2011) DFARS

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from Date of Award through 31 August 2018

4. Allocation of Cost for Proposals is hereby added as follows:

When preparing the Pricing Proposal, offerors are instructed to include the following costs in each of the CLIN prices.

CLIN 0001 - MANUFACTURING QUALIFICATION TESTING - Pre-Production Sample is Not Seperately Priced.

CLIN 0002 – FIRST ARTICLE (FA) TEST BATCH - This CLIN shall include all developmental costs and associated capital asset costs for the preparation/retrofit/modification of the contractor’s plant/facility relevant to production of the FA quantity and/or any capital asset costs necessary to becoming a Defense Fuel Support Point (DFSP).

CLINs 0003-0007 JP-10 BULK These CLINs shall include all variable and incremental costs to produce a gallon of JP-10 including production labor and any escalation in costs from year to year.

CLINs 0008-0012 JP-10 DRUM These CLINs shall include all variable and incremental costs to drum a gallon of Government-provided JP-10 excluding production labor, and any escalation in costs from year to year.

CLINs 0013-0017 PF-1 BULK These CLINs shall include all variable and incremental material costs and any escalation in costs from year to year to produce a gallon of PF-1 using Government-provided JP-10 excluding production labor. All labor costs for mixing the PF-1 are to be included in CLIN 0006 Monthly Facility Fee.

CLINs 0018-0022 PF-1 DRUM These CLINs shall include all variable and incremental material costs, drumming costs and any escalation in costs from year to year to produce a gallon of PF-1 using Government-provided JP-10 excluding production labor. All labor costs for mixing the PF-1 are to be included in CLIN 0006 Monthly Facility Fee.

CLIN 0023-0027 MONTHLY FACILITY FEE (MFF)

The MFF cost is fixed and shall include all costs associated with depreciation of capital assets including maintenance. The MFF should include the cost for providing, and maintaining the minimum of two storage tanks

PAGE 2 OF 3 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SPE60113R0324-0001

with a total capacity of at least 130,000 gallons and 170 drums as required in the Statement of Objectives;

all distribution costs, all labor costs for mixing/producing the PF-1 and performing DFSP related duties; all overhead costs and profit.

CLIN 0028-0032 INJECTION OF FUEL SYSTEM ICING INHIBITOR (FSII) INTO JP-10/PF-1

Proposed price shall include Contractor-provided FSII and all costs associated with proportionally injecting FSII into fuel shipments as well as performing FSII content verification testing.

5. The closing time and date for this solicitation remains unchanged on 13 August 2013 at 3:00 PM Central Time.

PAGE 3 OF 3 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SPE60113R0324-0001