ULA LOX SOO.pdf

SP0600-11-R-0331

STATEMENT OF OBJECTIVES - LOX

25 Apr 2011

1. GENERAL INFORMATION

1.1. DLA Energy, as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and services, requires delivery of bulk Liquid Oxygen (LOX) to Cape Canaveral Air Force Station (CCAFS) FL. The Contractor shall provide all product, raw materials, supplies, management, tools, equipment, labor, and transportation necessary for the delivery of LOX. All deliveries to CCAFS shall be f.o.b. destination.

2. PRODUCT REQUIREMENTS

2.1. LOX provided shall conform to Performance Specification, Propellant, Oxygen, MIL- PRF-25508G, dated 21 November 2006, Type II, Grade A. The filter outlined in paragraph 3.3 of the performance specification is required.

2.2. A copy of the Certificate of Analysis (CoA) shall accompany each tanker truck shipment of LOX.

2.2.1. In addition to the reports required elsewhere within this contract, one copy of a CoA for each sample required by the specifications shall be sent to DLA Energy QA/QT within three days after the analysis of that sample. The analysis report shall be emailed to tech.prop@dla.mil, or faxed to the attention of DLA Energy QA/QT at (210) 925-8048.

2.3. Inspection and Quantity determination shall be at origin. Acceptance shall be at destination. Unit of issue for LOX shall be TN (ton) for all documentation. Conversion of LOX:

Quantity determinations by weight shall use a conversion 210 gallons of LOX equals 1 Ton.

3. PRODUCT ORDERING

3.1. Blanket Delivery Orders (DD Form 1155) will be issued by the DLA Energy Contracting Officer (CO). The Government assigned Ordering Officer(s) will place commodity delivery orders with the Contractor within 10 days prior to base quantity need dates. A schedule of estimated delivery orders is provided on the attachment titled “Estimated Base Quantity Orders”.

3.2. DLA Energy Inventory Manager is authorized to issue a DD Form 2908, Propellant Delivery/Services Task Schedule (PDST), which will confirm and designate the specifics of the individual deliveries to be accomplished under the Blanket Delivery Order. The PDSTs issued by the DLA Energy Inventory Manager are considered extensions of the Blanket Delivery Order issued by the DLA Energy CO. The PDST issued by the DLA Energy Inventory Manager will normally be in writing, dated and serially numbered. Telephone or email orders issued for emergency deliveries will be confirmed in writing within one business day.

3.3. Changes or modifications to the delivery date and time of a commodity or the volume of commodity delivered may be made by the Ordering Officer no later than 6 hours in advance for launch and wet dress rehearsal (WDR) scrub replenishments, due to usage variability.

mailto:tech.prop@dla.mil�

3.4. Contractor shall provide DLA Energy a list of personnel available on a 24-hour a day basis to take orders from the Ordering Officer, as well as delivery information/status on the order. The list shall include full name, office phone number, cell phone number, fax number and email. DLA Energy shall be notified of changes in contact personnel, phone numbers and email addresses.

4. PRODUCT DELIVERY

4.1. Products shall be supplied in Contractor provided tankers. Upon notification by the Government assigned Ordering Officer(s), the Contractor shall be required to fill, schedule product inspection, complete all support documentation, and deliver products within a specific timeframe as requested by the Ordering Officer to meet Customers unique schedule and usage demands on a 24 hour/365 day basis. It is essential that tankers arrive on site at the pre-scheduled time since tankers are generally offloaded in groups of tankers.

4.2. For CCAF Launch Complex 37 (CX-37), Contractor shall have the following capabilities for LOX deliveries to support a medium vehicle launch or WDR scrub, or turnaround efforts, (as required to support 24hr turnaround operations in the event of a launch or WDR scrub).

4.2.1. Contractor shall provide 10 each LOX tankers with a minimum delivery capacity of 214 TN every 24hrs, (1 set of 10 tanker deliveries per day).

4.3. Delivery communications: Contractor shall provide a Point of Contact (POC) and one back up person to be available 24 hours/365 days for the delivery location. The customer launch site will have a designated communication person to communicate directly with the Contractor POC any schedule changes, cancellation, and any other changes that will affect the delivery of the product from the Contractor. The customer launch site communication person will be responsible for notifying the Contractor of any changes for non-WDR/Launch attempt operations prior to tanker departure from Contractor facility. For WDR/Launch attempt operations, the customer launch sites communications person will be responsible for notifying the Contractor within 12 hours of any changes. Contractor shall confirm schedule changes within 2 hours.

4.4. Aborted delivery: on rare occasions due to launch/WDR scheduling delays, at no fault to the Contractor, the Contractor may be requested to return full tankers to their facilities.

5. TOOLS AND EQUIPMENT

5.1. Contractor will provide those tools and equipment required to connect cryogenic transfer lines from the Contractor’s vessel to the customer’s offload station.

5.2. Contractor shall have the capability to meet the following

LOX Offload Tanker GSE Requirements

(current attach points) ACME Cryogenics, 3” Female Nut, P/N 540-005-30 with 4.25- 4 ACME threads at the end of the facility flex hose which shall connect to the Tanker Liquid Fill/Withdrawal Connection.

5.3. Contractor shall provide tankers with a maximum allowable working pressure (MAWP) of 40 psig or higher. All tanker and hose connections shall be clean and maintained prevent any contaminates being introduced and to meet industry safety standards.

5.4. Tanker operators shall be prepared for and execute clean-up of spilled oil, coolant, or other leaks or contamination.

5.5. Contractor shall provide personal protective equipment to its employees. This equipment will include, but is not limited to: Full face shields, anti-static coveralls, hard hats, closed toe nonporous foot protection, hearing protection, proper clothing meeting or exceeding safety standards as required in performing cryogenic propellant transfer operations safely.

5.6. Contractor shall provide proper training in the use of personal protective equipment, to all its employees that are requiring its use. At no time, without expressed permission from the customer, shall any Contractor personnel operate any customer equipment.

5.7. Contractor equipment identified as needing repair shall be repaired before returning for subsequent deliveries to customer’s facility. If Customer has assessed that trailer is not able to meet safety or operational requirements, the trailer will be rejected at no cost to the Customer or to the Government.

5.8. If conditions warrant due to customer’s mission requirements, Contractor may be required to remove and/or secure devices such as cell phones, radios, Global Positioning Systems and other transmitting devices prior to entering launch complex gates. Failure to do so may result in a delivery rejection.

6. DOCUMENTATION

6.1. Contractor shall provide at time of delivery a CoA specifying the media, sample location (tanker, bulk storage, or other) for which analysis was performed, sample date and date container/tanker was filled. This certificate shall provide evidence that delivered media meets all requirements of the specification as identified above in paragraph 2. This certificate must be reviewed and approved by a Customer’s representative prior to container/tanker connection to customer’s facility. If individual tanker contents delivered are from the same facility bulk storage volume, then a single certificate would be valid for all tankers containing the same certified propellant after initial tankers are certified. A bulk storage sample for a planned quantity of tankers extending over several days would be acceptable if bulk is not replenished. A fresh bulk storage sample would be required if a significant change has been made to the plant storage tank or 30 days has elapsed since the last delivery.

6.2. Contractor shall provide, at time of delivery, a certified weight ticket identifying the product quantity in tanker.

7. TRAINING/SECURITY

7.1. All Contractor personnel required to work on customer controlled sites are required to submit to a safety training orientation. Customer Safety personnel will administer the orientation at a time deemed appropriate by Customer, within 48 hours of a Contractor’s personnel arrival on site. Customer will not be charged the time spent in safety training Contractor personnel.

This training will exceed no more than 2 hours of given personnel's time. Prior to receiving this training, no Contractor personnel will be allowed on site unescorted.

7.2. Contractor shall provide only properly licensed drivers and certified product operators.

7.3. Contractor and all subcontractors shall comply and be in accordance with all security and badge requirements required on USAF Installations and United Launch Alliance (ULA) CCAFS, see attachment titled “DOC 359, Security Requirements at Cape Canaveral, Florida and Vandenberg, California”. All required badges shall be worn and be visible at all times while onsite.