0518 Attachment 2.pdf

Appendix A

MIL.DTL-Z5524E(USAF)

Chemlcatand Physical Requirement. and Test Method••

Reouiremellts Minimum Maximum ASTM Standard

Test Melhods

Color, Sayboll

Tolal acid number. mg KOHlg

+24

0.Ql5

,D156 or D6045

D3242

Aromatics, volume percent

Sulfur, Mercaptan, mass percent OR

DoclorTesl

Sulfur, total, mass percent

Distillation temperature, °C (D28871imils in pare,lIheses)

5.0 20.0

0.001 negative

0.3

D1319

D3227

D4952

DI266, D2622, D3120,

,D4294, orD5453

,D86 or D2887

Inilinl boiling point J0 percent recovered 50 percent recovered 90 percent recovered End Point Residue, volume pcrcelll (D86) Loss, volume percent (D86)

157 (105) 193 (174) 204 (207) 238 (250) 260 (288)

1.5 1.5

Flash poinl, °C (oF) 43(110) D56, ,D93, or ,D3828

Density, kg/L (API) at 15°C

Freezing point, °C e'F)

Vis-cosily. centislo"kes, at -40°C

0.767 (53.0) 0.797 (46.0)

-53 (-64)

12.0

D1298 or , D4052

,D2386, D5901 or D5972

D445

Net heat of combustion, MJ/kg (BTU/lb)

42.8 (18,400) D3338, 04529, or ,D4809

Hydrogen content, mass percent OR 14.00 D3343 or ,... ,D3701

Smoke point. mm

Copper slrip con"osian, 2 hT al LOO°C

Thermal slability (JFTOT) JFTOT TDR, rna.

JFTOT mm Hg pres. difr., rna.

Exislent gum, mg/IOO mL

25.0

Ib

5.0

D1322

DUO

,D3241 ,D3241

.D381

Attachment 2

SP0600-09-R-0518

Houston, TX

MtL-DTL.25524E(USAF)

Chemical And Physical Requiremelds and Test Methods.

Requirements Minimum Maximum

ASTM

Standard Test Methods

Particulate matter, mgIL ,D2276 or, Origin Destination

Water reaction

0.3 0.5

D5452

Interrace rating

Waler separation characteristics Report

Ib D1094

Additives JFA-5, mgIL Metal deaClivator Antioxidant, ppm by weight

8.6 Report cone. and Type Report conc. and Type

ll.4

D3948

Fuel system icing inhibitor. vol percent

Con·osion inhibilol11ubricity improver

0.10

0,]5

• .D5006

, Referee Test Method lASTM D56 may Sll't! rt'slllls liP to l"C (2°F) below 11,e ASTM D93 results. ASTM D3828 "In,' gil'l! us"tls lip to 1.7°C (JoF) below ,h~ ASTM D93 results.

J For m/n,/ariIl8 lIre lIel heo' ojcombltslioll millS ASTM DJ-U8. ,I,e al'enlgt dislllllllioll (f!mpf!r{ll"~ sholl be C'alcllioled as/ollo.....s. wllt'll 'he di.~/il1lUlol/ is perfonl!f!d IIsillg ItSTM D2887:

10% + 50% + 90% ¥= .J

., For mlclllalillg II,e "J'drogell C'OIr/elll "si"S ASTM D3343, Ihetn'emge dlstmafi011umptrtltllre sholl be C'oICltlal", (l3101l,,"'s whellllre disril/oflolllsptr/onlied JLf;lJg ItSTM D2887:

I~ + 50%+ 90% v= J

",'iee 4.5.2.I/or the JFTOT proC'ed"rts a"d ralillg proudllres.

41fair;s "sed lllSlead o/steam willie pet/orming ASTM D38J, it m/lst lie rtported. JII C'o.re 0/afaill"e witll air, Ihe somple mllst be "'erred fU'iIlS sleom.

,It miniml/m somple si!,e 0/3.785 fiter.J (J gal/oil) .r/lall befillrred.

, Test slJall br peifarmed In oCf:ordlU/cr \I'M ASTM D5006 ar me/llod 5327.5340, or 5342 p/FEDSTD·19J. V.l'e Ille appropriate scalf offlle refmclometer.

"SeeJ.4.5.

Workmanship. Allhe time of Governmenl acceptance, the finished fuel shall be clear, brighl, and visually free from undissolved \Vater, sediment, or suspended mailer. In case of dispute. the fuel shall be clear and bright at 21°C (70°1') and meet the fable 1 particulate mailer requiremeat.

Attachment 2

SP0600-09-R-0518

Houston, TX