The file's text, extracted by GovTribe without its formatting.
Bureau of International Narcotics and Law Enforcement Affairs (INL) Weapons Program Mexico Statement of Work
LAB EQUIPMENT
1. GENERAL
The Bureau of International Narcotics and Law Enforcement Affairs (INL) leads the Department of State’s anticrime and counter-narcotics efforts. INL’s mission is to minimize the impact of international crime and illegal drugs on the United States, its citizens, and partner nations by providing effective foreign assistance and fostering global cooperation. INL supports our partner nations on stabilization and strengthening of security institutions to build a global security capacity for combating drug trafficking and other transnational crimes such as money laundering and criminal gangs. INL also provides assistance on strengthening of justice sector institutions, which fosters promotion of good governance and respect for human rights.
2. SCOPE
With support from the Bureau of International Narcotics and Law Enforcement Affairs (INL), specialized lab equipment will be procured.
3. REQUIREMENTS
3.1 The Contractor shall acquire and deliver new lab equipment, as described in Appendix A - Lab Equipment (Technical Specifications of Items) to the U.S. Government (USG) for the benefit of the Government of Mexico (GOM) at INL Warehouse in Brownsville, see section 5, Table One - Delivery Location. The contractor shall provide an OEM in-country warranty valid and applicable in Mexico for all lab equipment listed in Appendix A. All goods shall be new, must arrive without damage and shall meet or exceed the salient characteristics as detailed. Refurbished, recycled or used items are not acceptable. No installation is required.
3.2 Contractor shall coordinate the delivery with INL logistics point of contact at any time. Contractor must wait to receive INL written confirmation before delivering any lab equipment. The Contracting Officer (CO), the Contracting Officer Representative (COR), the Government Technical Monitor (GTM), the Strategic Acquisition Planning (SAP) Team and INL Weapons Program must always be copied in all communication.
3.3 All items shall be received by INL Logistics/Weapons Program/COR-GTM/SAP team at the INL Warehouse in Brownsville. It is critical that the contractor ensure pallets are packed and organized strictly by end user — no mixed merchandise between end users will be accepted. The equipment shall be organized and labeled by the contractor per end user: CBP-CAMDEX, FBI-TEDAC1 and FBI-TEDAC2 as described in Appendix One. Once received, the USG will inventory the items and reseal the boxes with contractor support. Each end user will then be responsible for distributing their respective items to their final destination.
3.4 Partial deliveries are not allowed. The Contractor is required to have a physical representative on site during the delivery and for the duration of inspection by the Government or its agents. The Government intends to open boxes for a complete physical inspection of all delivered equipment and encourages the Contractor to consider the best way to deliver the lab equipment in a way that facilitates inspection. The Contractor shall be responsible for loading and unloading all items at the warehouse in an organized manner, sorted by end user. Any handling, staging, and arrangement of equipment within the delivery area and inventory shall be performed by the Contractor's on-site representative to ensure proper identification and accountability of all delivered items.
3.5 Upon contract award, the contractor shall schedule and conduct a virtual kickoff meeting within five (5) calendar days. This upcoming meeting will bring together the GTM, INL SAP Team, Weapons Program team, Logistics team, the CO and the COR, as well as representatives from the CBP and FBI. Its purpose is to clarify the scope of work, set main points of contact, and confirm the delivery schedule.
3.6 Note: A donation process to the GOM is not required for this delivery, as the USG will be the recipient.
4. PERIOD OF PERFORMANCE
4.1 Contractor shall complete delivery within a period of 60 calendar days after Contract is awarded for all items listed in Appendix A.
4.2 Interim Secure Storage may be required prior to shipping the items to the designated location listed in Section 5, Table One – Delivery Location, this storage may last up to 60 calendar days.
5. DELIVERY
5.1 No item can be delivered at final destination without previous authorization and coordination with INL Mexico Logistics, and INL Weapons Program. Contractor must wait to receive INL confirmation before delivering equipment. Once the Contractor gets written approval, a specific delivery date will be established. Any action taken from contractor without writing confirmation will be considered under clause 9 Nonpayment for unauthorized work.
5.2 Contractor must ensure all items are prepared for safe transportation once confirmation from INL Logistics and Weapons Program is received. Contractor will be responsible for unloading. The Contractor shall replace lost or damaged items during transportation and/or unloading. Contractor’s personnel must be present at the time of delivery to conduct the inventory of all the items listed in Appendix A.
5.3 All delivery information, including the packing list and a Technical Specifications/Data sheet of all lab equipment shall be forwarded to INL INL Weapons Program and INL Mexico Logistics (mexicocityinllogistics@groups.state.gov) two (2) weeks in advance of delivery to the delivery location detailed in this section Table One. See section 7, Table Two –Deliverables List. The packing list shall include but not limited to: Item Description, Name of Manufacturer, Model Number, Serial Numbers, Delivered Quantity, Unit Price, Extended Price, and Warranty Expiration Date for all hardware.
5.4 One copy of the packing list must accompany the delivery. The packing list shall be attached to the outside of the "lead" or number one box/carton/package or individually attached to the outside of each box/carton/package.
Table One – Delivery Location
| United States |
| 225 South Vermillion Rd., Brownsville, TX., 78521 |
POC Laura Cisneros, CisnerosLL@state.gov
5.5 INL will be responsible for transporting the equipment from Brownsville to the INL warehouse in Mexico. End users will be responsible for deploying and installing, as required.
6. IN-COUNTRY WARRANTY
6.1 The Contractor shall provide OEM in-country warranty valid ad applicable in Mexico for all lab equipment listed in Appendix A. Laboratory equipment shall be delivered and maintained in good condition and will be inspected upon receipt at the warehouse in Brownsville, Texas. If any equipment is found to be damaged, defective, or not in acceptable condition, it will be returned to the vendor for correction or replacement.
6.2 The OEM warranty shall commence upon delivery of the equipment in Brownsville.
6.3 The contractor shall confirm for each item listed in Appendix A whether it includes a valid in-country warranty applicable in Mexico.
6.4 Warranty clause applicable in Mexico remains unchanged and is included as a mandatory requirement. Due to the sensitive nature of the lab equipment, no modifications, substitutions, or exceptions to the warranty requirements will be accepted.
7. DELIVERABLES
7.1 The contractor shall provide the original hard copy and a PDF copy of the Technical Data Sheet in English for all lab equipment listed in Appendix A. See below Table Two – Deliverables List.
7.2 The contractor shall provide the original hard copy and a PDF copy of the Manuals in English for all applicable lab equipment listed in Appendix A. See below Table Two – Deliverables List.
7.3 The contractor shall provide both the original hard copy and a PDF copy of the in-country warranty documentation in English for all equipment listed in Appendix A. The contractor shall ensure hard copies are included with the equipment at the time of delivery. In country warranty must include the expiration date. See below Table Two – Deliverables List.
Table Two – Deliverables List
| Deliverable |
| Language |
| Due Date |
| Distribution |
| D01 A packing list. Pdf format |
| English |
| Fourteen calendar days prior to delivery. |
| INL Logistics |
INL SAP team INL Weapons Program
GTM/COR
| D02 Technical Data Sheet for equipment listed in Appendix A. Pdf format. |
| English |
| Fourteen calendar days prior to delivery. |
| INL Logistics |
INL SAP Team INL Weapons Program
GTM
| D04 Manuals for equipment & software listed in Appendix A. The original hard copy and a Pdf copy. |
| English |
| Hard copy shall be included with the equipment at the time of delivery. |
Pdf copies no later than seven calendar days after delivery.
Hard Copy to End User.
A pdf copy to INL SAP team, GTM & INL Weapons Program
| D03 In-Country warranty for equipment listed in Appendix A. The original hard copy and a Pdf copy. |
| English |
| Hard copy shall be included with the equipment at the time of delivery. |
Pdf copies no later than seven calendar days after delivery.
Hard Copy to End User.
A pdf copy to INL SAP team, GTM & INL Weapons Program
7.4 All deliverables shall include a cover page incorporating at least the following information:
· Deliverable number and name
· Contract number
· Project title
· Date of submission
· Document version number
· Contractor’s Name
8. TECHNICAL EVALUATION FACTORS
The following evaluation factors will serve as the basis to evaluate the contractor on providing timely and high-quality performance during execution of the contract:
FACTOR ONE: Technical Compliance Contractor shall provide all labor, services, tools, equipment, materials, transportation, supervision and all requirements necessary to accomplish the efforts described in this Statement of Work; complying with the scope and requirements stated.
FACTOR TWO: Delivery Requirement Contractor shall complete delivery within a period of 60 calendar days after Contract is awarded, complying with the period of performance, delivery location and deliverables stated in this Statement of Work.
APPENDIX A – LAB EQUIPMENT
TECHNICAL SPECIFICATIONS OF ITEMS
All equipment must be new; refurbished equipment will not be accepted.
All equipment must comply with the minimum requirements specified.
Images of the proposed equipment must be attached to the RFP submission.
CBP- CAMDEx (End User)
| Line Item |
| Model # |
| Product |
| Description (Minimum Specifications) |
| Qty |
| Unit |
Soldering Station
| 1 |
| JBC NASE-1C |
| Rework Station Kit |
| Rework Station Kit, Premium, 120V (Tips Included) |
Includes:
(1) 2-Tool Nano Control Unit
(1) AN115 Adjustable Nano Tweezers
(1) NT115 Nano Handle
(1) C115101 Conical Ø 0.1
(1) C115103 Conical Ø 0.3 S1
(2) C115105 Conical Bent Ø 0.3
(1) C115107 Conical Ø 0.8
(1) C115112 Knife 2.5 x 0.3
(2) C115113 Chisel 1 x 0.3
(1) P405 Pedal JBC NASE-1C 2-Tool Nano Brand Name Only In-Country Warranty
| 2 |
| JBC TESE-1B |
| Precision Hot Air Station |
| Precision Hot Air Station w/Nozzles, 100-120V, 300W, FAE Connection |
Must be compatible with CLIN 18 and CLIN 33 JBC TESE-1B Precision Hot Air Station Brand Name Only In-Country Warranty
| 3 |
| JBC C115101 |
| Soldering Tip, Cartridge, Conical, 0.1mm |
| Soldering Tip, Cartridge, Conical, 0.1mm, 5mm L, C115 Series |
Must be compatible with CLIN 1 JBC C115101 Soldering Tip Brand Name Only
| 4 |
| JBC C115105 |
| Soldering Tip, Cartridge, Conical Bent 0.3mm |
| Soldering Tip, Cartridge, Conical Bent, 0.3mm, 4.5mm L, C115 Series |
Must be compatible with CLIN 1 JBC C115105 Soldering Tip Brand Name Only
| 5 |
| JBC C115118 |
| Soldering Tip, Cartridge, Conical Bent, 0.1mm |
| Soldering Tip, Cartridge, Conical Bent, 0.1mm, 4.5mm L, C115 Series |
Must be compatible with CLIN 1 JBC C115118 Soldering Tip Brand Name Only
| 6 |
| JBC C115128 |
| Soldering Tip, Cartridge, Spoon 1mm, |
| Soldering Tip, Cartridge, Spoon, 1mm, 4.5mm L, C115 Series |
Must be compatible with CLIN 1 JBC C115128 Soldering Tip Brand Name Only
| 7 |
| JBC C115116 |
| Soldering Tip, Cartridge, Chisel, 0.2 x 0.1mm |
| Soldering Tip, Cartridge, Chisel, 0.2 x 0.1mm, 5mm L, C1125 Series |
Must be compatible with CLIN 1 JBC C115116 Soldering Tip Brand Name Only
| 8 |
| JBC C115125 |
| Soldering Tip, Cartridge, Chisel, 1 x 0.2mm |
| Soldering Tip, Cartridge, Chisel, 1 x 0.2mm, 6mm L, C115 Series |
Must be compatible with CLIN 1 JBC C115125 Soldering Tip Brand Name Only
| 9 |
| JBC C115124 |
| Soldering Tip, Cartridge, Conical Bent, 0.1mm, 4.5mm L, C115 Series |
| Soldering Tip, Cartridge, Conical Bent, 0.1mm, tip length 4.5mm L, C115 Series |
Must be compatible with CLIN 1 JBC C115124 Soldering Tip Brand Name Only
| 10 |
| JBC C115115 |
| Conformal Coating Removal Cartridge, 1 x 6mm |
| Conformal Coating Removal Cartridge, 1 x 6mm, Tip length 6mm Not for Soldering, C115 Series |
Must be compatible with CLIN 1 JBC C115115 Conformal Coating Removal Cartridge Brand Name Only
| 11 |
| JBC C115112 |
| Soldering Tip, Cartridge, Knife, 2.5 x 0.3mm, 6mm L, C115 Series |
| Soldering Tip, Cartridge, |
Tip Type: Knife
2.5 x 0.3mm Tip length 6mm C115 Series Must be compatible with CLIN 1 JBC C115112 Soldering Tip Brand Name Only
| 12 |
| JBC C115117 |
| Soldering Tip, Cartridge, Chisel, 0.4 x 0.2mm, 5mm L, C115 Series |
| Soldering Tip, Cartridge, Chisel, 0.4 x 0.2mm, 5mm L, C115 Series |
Must be compatible with CLIN 1 JBC C115117 Soldering Tip Brand Name Only
| 13 |
| JBC C115211 |
| Soldering Tip, Cartridge, Blade, 3.5 x 0.7mm, 5.5mm L, High Thermal, C115 Series |
| Soldering Tip, Cartridge, Blade, 3.5 x 0.7mm, 5.5mm L, High Thermal, C115 Series |
Must be compatible with CLIN 1 JBC C115211 Soldering Tip Brand Name Only
| 14 |
| JBC C245906 |
| Soldering Tip, Cartridge, Chisel, 1.2 x 0.7mm, 10mm L, For T245 Handles, C245 Series |
| Soldering Tip, Cartridge, Chisel, 1.2 x 0.7mm, 10mm L, For T245 Handles, C245 Series |
Must be compatible with CLIN 18 JBC C245906 Soldering Tip Brand Name Only
| 15 |
| JBC C245903 |
| Soldering Tip, Cartridge, Conical, 1mm, 10.5mm L, For T245 Handles, C245 Series |
| Soldering Tip, Cartridge, Conical, 1mm, 10.5mm L, For T245 Handles, C245 Series |
Must be compatible with CLIN 18 JBC C245903 Soldering Tip Brand Name Only
| 16 |
| JBC C245929 |
| Soldering Tip, Cartridge, Conical Bent, 0.6mm, 9.5mm L, For T245 Handles, C245 Series |
| Soldering Tip, Cartridge, Conical Bent, 0.6mm, 9.5mm L, For T245 Handles, C245 Series |
Must be compatible with CLIN 18 JBC C245929 Soldering Tip Brand Name Only
| 17 |
| JBC C245933 |
| Soldering Tip, Cartridge, Conical, 2.2mm, 12mm L, For T245 Handles, C245 Series |
| Soldering Tip, Cartridge, Conical, 2.2mm, 12mm L, For T245 Handles, C245 Series |
Must be compatible with CLIN 18 JBC C245933 Soldering Tip Brand Name Only
| 18 |
| JBC RMSE-1QG |
| Soldering and Desoldering Workstation |
| Soldering and desoldering workstation | Complete Rework System |
Includes:
•Soldering, hot air and vacuum functionality •DDE two channel control unit •JTSE hot air unit and hose set •T245 general purpose iron (tips sold separately) •DR560 desoldering iron (with C560003 nozzle) •MSE-B electric desoldering module JBC RMSE-1QG or equal Brand Name Only In-Country Warranty
| 19 |
| JBC CLMU-A |
| Universal Tip Cleaner |
| Universal Tip Cleaner with metal brushes |
Must be compatible with CLIN 1, CLIN 18, CLIN 32, and CLIN 33 JBC CLMU-A Universal Tip Cleaner Brand Name Only
| 20 |
| JBC CLMB-A8 |
| Replacement Brushes for CLMB-A Senior Tip Cleaner |
| Replacement Brushes for CLMB-A Senior Tip Cleaner |
Box of two replacement brushes Must be compatible with CLIN 1, CLIN 18, CLIN 32, and CLIN 33 JBC CLMB-A8 Replacement Brushes Brand Name Only
| 21 |
| JBC C560002 |
| Desoldering Tip, Through-Hole, 0.031" Inside Diameter, 0.071" Outside Diameter |
| Desoldering Tip, Through-Hole tip-style, 0.031" Inside Diameter, 0.071" Outside Diameter |
Must be compatible with CLIN 1, CLIN 18, CLIN 32, and CLIN 33 JBC C560002 Desoldering Tip Brand Name Only
| 22 |
| JBC C560003 |
| Desoldering Tip, Through-Hole, 0.039" Inside Diameter, 0.106" Outside Diameter |
| Desoldering Tip, Through-Hole tip-style, 0.039" Inside Diameter, 0.106" Outside Diameter |
Must be compatible with CLIN 18 JBC C560003 Desoldering Tip Brand Name Only
| 23 |
| JBC C560005 |
| Desoldering Tip, Through-Hole, 0.063" Inside Diameter, 0.134" Outside Diameter |
| Desoldering Tip, Through-Hole, 0.063" Inside Diameter, 0.134" Outside Diameter |
Must be compatible with CLIN 18 JBC C560005 Desoldering Tip Brand Name Only
| 24 |
| JBC C560011 |
| Desoldering Pad Cleaning Tip 1.4mm 0.6mm |
| Desoldering Pad Cleaning Tip 1.4mm 0.6mm |
Must be compatible with CLIN 18 JBC C560011 Desoldering Pad Cleaning Tip Brand Name Only
| 25 |
| JBC C560013 |
| Pad Cleaning Tip with Side Slit |
| Pad Cleaning Tip with Side Slit, 2.7mm Inside Diameter, 1 mm tip width, For DR560 Desoldering Iron |
Must be compatible with CLIN 18 JBC C560013 Pad Cleaning Tip Brand Name Only
| 26 |
| JBC TN9209 |
| Straight Nozzle, Dia 3 mm, For TET S Heater Hose Set |
| Straight Nozzle, Inside Diameter 3 mm, Heater Hose Set |
Must be compatible with CLIN 18, CLIN 32, and CLIN33.
JBC TN9209 Straight Nozzle Brand Name Only
| 27 |
| JBC TN8851 |
| Nozzle, Bent 45 Degree, 3mm Inside Diameter |
| Nozzle for TE Heater, Bent 45 Degree, 3mm Inside Diameter |
Must be compatible with CLIN 18, CLIN 32, and CLIN 33.
JBC TN8851 Nozzle Brand Name Only
| 28 |
| JBC DPM-C |
| Manual Solder Paste Dispenser |
| Manual Solder Paste Dispenser |
Dispenses solder paste, adhesive, solder flux Must be compatible with CLIN 18 JBC DPM-C or equal
| 29 |
| JBC SB03CC |
| Syringe Barrel, 3cc capacity |
| Syringe Barrel, 3cc capacity |
Pack includes 5 pieces Must be compatible with CLIN 1, CLIN 18, CLIN 32, and CLIN 33.
JBC SB03CC Syringe Barrel or equal
| 30 |
| JBC ND-KP |
| Tapered Dispensing Tips |
| Tapered Dispensing Tips, 10 Piece Set |
Must be compatible with CLIN 1, CLIN 18, CLIN 32, and CLIN 33.
JBC ND-KP Tapered Dispensing Tips or equal
| 31 |
| JBC PH224 |
| Polyimide Film, 300C, 12 x 33 mm |
| Polyimide Film, ESD tape, 300C, 12 x 33 mm |
Must be compatible with CLIN 1, CLIN 18, CLIN 32, and CLIN 33.
JBC PH224 Kapton Tape or equal
| 32 |
| JBC PHBE-1KB |
| Preheater Set, 120V |
| Preheater Set |
Voltage: 120V Power Rating: 1800W ESD safe Temperature Range: 50-250-degrees C Includes:
1 Instruction Manual 1 Heater Unit 1 PHBS Support for PCBs up to 14 x 11" JBC PHBE-1KB Preheater Set Brand Name Only In-Country Warranty
| 33 |
| JBC RWT-B |
| Rework Adjustable Arm, Workbench, Incline, Rotate, For JTSE / TESE Stations |
| Rework Adjustable Arm, Workbench, Incline, Rotate, For JTSE / TESE Stations |
JBC RWT-B Rework Adjustable Arm Brand Name Only
Soldering Station Support Supplies
| 34 |
| PACE 8889-0305-P1 |
| Fume Extractor, Arm-Evac 200, 120V, W/4' ESD Safe Flex Arm And Nozzle |
| Fume Extractor, Arm-Evac 200, 120V, W/4' ESD Safe Flex Arm And Nozzle |
PACE 8889-0305-P1 Fume Extractor Brand Name Only In-Country Warranty
| 35 |
| PACE 8885-1225-P1 |
| Silencer Cart, For Arm Evac 200, And Arm Evac 250 |
| Silencer Cart, For Arm Evac 200, And Arm Evac 250 |
PACE 8885-1225-P1 Silencer Cart Brand Name Only In-Country Warranty
| 36 |
| PACE 8883-0922-P1 |
| Filter, HEPA, Replacement Parts, for Arm Evac 105, 150, 200, 250 Fume Extractors |
| Filter, HEPA, Replacement Parts, for Arm Evac 105, 150, 200, 250 Fume Extractors |
PACE 8883-0922-P1 Filter Brand Name Only
| 37 |
| PACE 8886-0750-P1 |
| Round Nozzle, w/ 3' Flexible Arm, For Arm Evac 105 |
| Round Nozzle, w/ 3' Flexible Arm, For Arm Evac 105 |
PACE 8886-0750-P1 Round Nozzle Brand Name Only
| 38 |
| PACE 8886-0795-P1 |
| Air Flow Controller, For 75mm ESD Safe Flex-Arm |
| Air Flow Controller, For 75mm ESD Safe Flex-Arm |
PACE 8886-0795-P1 Air Flow Controller Brand Name Only
| 39 |
| 2-50L |
| Solder Wick, Rosin, 0.03" x 50 ft Roll, White Label |
| Solder Wick, Rosin, 0.03" x 50 ft Roll, #1, White Label |
Chemtronics 2-50L Size #1 or equal
| 40 |
| 5-50L |
| Solder Wick, Rosin, 0.05" x 50 ft Roll, Yellow Label |
| 5-50L Solder Wick, Rosin, 0.05" x 50 ft Roll, #2, Yellow Label |
Chemtronics 5-50L Size #2 or equal
| 41 |
| 10-50L |
| Solder Wick, Rosin, 0.110" x 50 ft Roll, Blue Label |
| Solder Wick, Rosin, 0.110" x 50 ft Roll, Blue Label |
Chemtronics 10-50L Size #4 or equal
| 42 |
| 24-6337-0007 |
| Solder Wire, Rosin Core, Leaded, 0.015" |
| Solder Wire, Rosin Core, Leaded |
Alloy name: Sn63Pb37 Flux: 3.3% Wire Diameter: 0.015" (0.40 mm) Kester 24-6337-0007 44 Series or equal
| 43 |
| 24-6337-0018 |
| Solder Wire, Rosin Core, Leaded, 0.025" |
| Solder Wire, Rosin Core, Leaded |
Alloy name: Sn63Pb37 Flux: 3.3% Wire Diameter: 0.025" (0.60 mm) Kester 24-6337-0018 44 Series or equal
| 44 |
| 81271 |
| Anti-Static Polyimide Tape, 1/2" x 36 Yards |
| Anti-Static Polyimide Tape, 1/2" x 36 Yards, 3" Plastic Core |
| 4 |
| Ea. |
| 45 |
| 81273 |
| Anti-Static Polyimide Tape, 1" x 36 Yards |
| Anti-Static Polyimide Tape, 1" x 36 Yards |
Thickness: 2.4 mil ESD and Static Safe
| 46 |
| 81270 |
| Anti-Static Polyimide Tape, 1/4" x 36 Yards |
| Anti-Static Polyimide Tape, 1/4" x 36 Yards |
Thickness: 2.4 mil ESD and Static Safe
| 47 |
| 1170-1 |
| Electrically Conductive Aluminium Foil Tape |
| EMI Shielding Tape, Aluminum Foil, Acrylic Adhesive |
1" x 18yds Thickness: 2.2 mil 3M 1170 Series EMI Shielding Tape or equal
| 48 |
| 758ST1436 |
| Conductive Copper Electrical Tape, 1/4"x36 Yds |
| Electrical Tape, Conductive Copper |
1/4"x36 Yds 3" Core Diameter Thickness: 3.5 mil Techni-Pro 758ST1436 Conductive Copper Electrical Tape or equal
| 49 |
| 758ST1236 |
| Conductive Copper Electrical Tape, 1/2"x36 Yds |
| Electrical Tape, Conductive Copper |
1/2"x36 Yds 3" Core Diameter Thickness: 3.5 mil Techni-Pro 758ST1236 Conductive Copper Electrical Tape or equal
| 50 |
| 758ST8136 |
| Conductive Copper Electrical Tape, 1"x36 Yds |
| Electrical Tape, Conductive Copper |
1"x36 Yds 3" Core Diameter Thickness: 3.5 mil Techni-Pro 758ST8136 Conductive Copper Electrical Tape or equal
| 51 |
| 758ST150 |
| Low Profile Mat Ground Cord |
| Low Profile Mat Ground Cord |
No Resistor in cord Snap size: 10mm Male Snap 10ft
| 52 |
| TL81A |
| Deluxe Electronic Test Lead Set |
| Deluxe Electronic Test Lead Set |
Kit contains: One black and one red of the following One meter long test lead with a safety shrouded, right angle banana connector on one end and a stainless steel test probe on the other end, rated up to 10A.
Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures Insulated alligator clip rated up to 5A Insulated probe tip extender rated up to 3A Modular test probe with banana connector in the handle, rated up to 10A Modular hook-style clip test lead with banana connector, rated up to 5A Modular pinch-style clip test lead with banana connector, rated up to 5A Modular alligator clip with banana connector, rated up to 5A Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers Bare spade lug with banana connector, rated up to 10A CAT III 300V - Compatible with Fluke and other multimeters that accept safety shrouded, standard diameter banana connectors CSA approved Fluke TL81A Kit Brand Name Only
| 53 |
| 758PL0033 |
| Wire Stripper, 22-30 AWG |
| Wire Stripper, 22-30 AWG |
AWG Size: 22-30 Stranded Capacity: 0.25-0.65 mm Handle Type: Cushion Grip Material: Steel Techni-Pro 758PL0033 Wire Stripper or equal
| 54 |
| CSP-30-7 |
| Wire Stripper, 26-16 AWG |
| Wire Stripper, 26-16 AWG Gauge Compatibility |
Material: Steel Hakko CSP-30-7 or equal
| 55 |
| TM24600L3GR |
| 3-Layer ESD-Safe Vinyl Table Mat Roll |
| ESD Table Mat Roll |
3-Layer Vinyl Color: Gray 0.14" x 24" x 50' 8200 Series
SCS 8233 or equal
| 56 |
| SCS 4650 |
| Wrist Strap and Coil Cord Set for Electrostatic Discharge Protection |
| Wrist Strap & Coil Cord Set |
Single-Wire Thermoplastic Wrist Strap: > 1 x 10⁷ ohm exterior with conductive interior < 1 x 10⁵ ohms Zipper Style Latching Mechanism: Easily adjusts to most wrist sizes 4mm male snap 4610 5' Coil Cord: One megohm current limiting resistor located at socket end Meets requirements of ANSI/ESD S20.20 and Wrist Strap standard ANSI/ESD S1.1 SCS 4650 or equal
| 57 |
| 057111 |
| Thin Wall Heat-Shrink Tubing Kit |
| Thin Wall Heat-Shrink Tubing Kit |
Total Pieces 86: 36 pcs 3/16" Black, 24 pcs 1/4" White, 12 pcs 3/8" Red, 6 pcs 1/2" Black, 4 pcs 3/4" White, 4 pcs 1" Red
| 58 |
| 758IE9001 |
| Micro Tools Set, 9-Piece |
| Micro Tools Set, 9-Piece |
Includes:
4.8" Black Aluminum Handle Micro-Chisel Point 90° Micro-Hook Micro Knife Stainless Steel Needle Probe Tungsten Needle Probe Diamond Scribe (75° Included Angle) x2 Tungsten Carbide Scribe Techni-Pro 758IE9001 or equal
| 59 |
| 758IE2500 |
| Precision Probe Set |
| Probe Set 8 pc Precision Tool 25 Mil Sing/Dbl |
Includes:
#1 Straight Tip #6 Single Bend #17 Triple Bend #23 Hook Straight/Double Bend Single Bend/Hook Triple Bend/Hook Single/Triple Bend 25 MIL Probes Single and double ended - Stainless steel tip with blue anodized aluminum handle.
Techni-Pro 758IE2500 or equal
| 60 |
| 758TW410 |
| Tweezers, Economy Reverse Action with Tip Shape Type 932 |
| Tweezers, Economy Reverse Action |
Material: Stainless Steel ESD Safe Tip Shape: Type 932 Tip Style: Component Handling Type: Economy Techni-Pro 758TW410 or equal
| 61 |
| 758TW518 |
| Heavy Duty Tweezers |
| Heavy Duty Tweezers |
Series 31 Finish: Satin Anti-glare Point Style: Fine Tip Shape: Pointed Tip Style: 31 Overall Length: 4.5" Material: Stainless Steel Tip Thickness: 0.13mm Tip Width: 0.15mm Type: Reverse-Action Techni-Pro 758TW518 or equal
| 62 |
| 758TW043 |
| Tweezer Set, 5-Pc. |
| Tweezer Set, 5-Pc. Used for Micro Assembly |
4.5" Includes:
fine point flat tip angled tip curved tip blunt tip Techni-Pro 758TW043 or equal
| 63 |
| 758TW107 |
| Surface Mount Device Handling (SMD) Tweezer |
| Surface Mount Device Handling (SMD) Tweezers |
Tip Style: Double Bent (Style SM107) Properties: Anti-Acid/Anti-Magnetic Material: Stainless Steel Length: 4.7" Techni-Pro 758TW107 or equal
| 64 |
| 758TW002 |
| Surface Mount Device Handling (SMD) Tweezer, Reverse Action |
| Surface Mount Device Handling (SMD) Tweezer |
Reverse Action, self-closing, holds components when not squeezed Style: SM110SA Tip Style: Finely Tapered Length: 4.75" Techni-Pro 758TW002 or equal
| 65 |
| 758TW546 |
| Tweezer Kit, Swiss Precision, 5-pc |
| Tweezer Kit |
Swiss Precision Manufactured Includes 5-pc:
Fine point (straight) Very fine point (straight) Curved point Flat tip Blunt tip Length: 4.5" Techni-Pro 758TW546 or equal
| 66 |
| KST-10 |
| Precision Tweezers Set |
| Tweezer Set - 10 pieces |
Includes:
Wooden Case AA-SA Boley Style Tweezer with straight medium point for general purpose use 00-SA Straight strong medium pointed tweezer in the most popular general purpose tweezer used without magnification 115mm OAL 00D-SA - Straight strong medium pointed tweezer features serrated tips for better handling and serrated handles for better control. 120mm OAL 1-SA - Straight blades and fine tips ideal for delicate applications. 127mm OAL 2-SA - Straight tapered blades and very fine tips. Designed for better visibility; works well under low magnification. 110 mm OAL 2A-SA - Straight tapered flat pointed tweezer ideal for handling labels or SMD components. 120mm OAL 3C-SA -.Straight blades and fine tips. Straight blades and fine tips. Designed for work under magnification. 120mm OAL.
5-SA - Straight tapered blades and extremely fine tips. Ultimate tweezers for high power microscopy. 150mm OAL.
5A-SA - Ideal for microscopy, featuring 10°offset tapered very fine tips for excellent visibility. 115mm OAL.
7-SA - Curved tapered blades and high precision points. Designed for maximum visibility under magnified applications. 115mm OAL.
Excelta KST-10 or equal
| 67 |
| 394-01 |
| Battery Operated Surface Mount Device (SMD) Vacuum Pickup Tool |
| Surface Mount Device (SMD) Vacuum Pickup Tool |
6.5" long Built-in minature vaccum pump, activated by a push-button ESD Safe Hakko 394-01 or equal
| 68 |
| 9PK-9110B |
| Cell Phone Opening Tool |
| Cell Phone Opening and Pry Tool |
Used for opening and disassembling cellphones, tablets, and other small electronic devices without damaging casings Techni-Pro 758IE1019 or equal
| 69 |
| 506495-0003 |
| Wash Bottle |
| Translucent Wash Bottle |
With capacity of 500mL Standard Spout lid Pack of 5 bottles
| 70 |
| SD-8-ESD |
| Solvent Dispenser 8 oz. |
| Solvent Dispenser with Pump Included, |
ESD Safe 8 oz.
Stainless steel pump with reservoir Techni-Pro 758ST449 or equal
| 71 |
| 19651 |
| Multi-Mount Continuous Monitor |
| Continuous Monitor, Multi-Mount, with North American Plug Adapter |
Single workstation continuous monitor Mounting tabs make it suitable to install in workbench or equipment settings Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent Mat monitor switch - disables the worksurface monitor circuit when used in areas where there is no ESD worksurface Continuous visual and audible alarm Wave Distortion Technology - provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor Park Snap - Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm Desco 19651 or equal
| 72 |
| WSC92424A3-TT |
| Workstation Cover 24" x 24" |
| ESD (Electrostatic Discharge) Workstation Cover, 24" x 24", Polyester |
Bound Edge Techni-Pro 758ST3050 or equal
| 73 |
| WSC92436A3-TT |
| Workstation Cover 24" x 36" |
| ESD Workstation Cover, 24" x 36" |
Polyester Bound Edge Techni-Pro 758ST3051 or equal
| 74 |
| 201W-36RED |
| Banana Plug Mini-Hook |
| Test-lead Mini-Hook to Stacking Banana Plug 36" |
E-Z-Hook 201W-36RED or equal
| 75 |
| 611-2 |
| Solder Wire Holder |
| Solder Wire Holder |
Includes:
Wire Guide for smooth dispensing of solder wire Grounding Screw for ESD safety Holds 2 x 2.2lb, ESD Safe, Black, 611 Series Hakko 611-2 or equal
| 77 |
| SM0883 |
| Storage Box 65 x 57 x15 mm |
| ESD-Safe SMD Storage Box with Transparent Lid, 65 x 57 x 15 mm |
Transforming Technologies Storage Box SM0883 or equal
| 77 |
| SM0881 |
| Storage Box 37 x 12 x15 mm |
| ESD-Safe SMD Storage Box with Transparent Lid, 37 x 12 x 15 mm |
Transforming Technologies Storage Box SM0881 or equal
| 78 |
| SM0880 |
| Storage Box 16 x 12 x15 mm |
| ESD-Safe SMD Storage Box with Transparent Lid, 16 x 12 x 15 mm |
Transforming Technologies Storage Box SM0880 or equal
| 79 |
| 758SO115 |
| Tip Tinner |
| Solid paste Tip Tinner |
Lead-Free
1.5 Oz.
Techni-Pro Tip Tinner 758SO115 or equal
| 80 |
| 758CH770 |
| Brush |
| Artist Brush |
Hog Hair brush with wooden exterior Handle 7" long Techni-Pro 758CH770 or equal
Non-Flammable Safe on plastics 12 oz Aerosol Chemtronics Duster ES1617 or equal
| 82 |
| 758ST603 |
| Tape Dispenser |
| Anti-Static Tape Dispenser for |
Core size 3" Maximum tape width up to 3" total width Holds up to three 1" rolls Techni-Pro Anti-Static Tape Dispenser 758ST603 or equal
| 83 |
| 204PR010 |
| Magnetizer/Demagnetizer |
| Magnetizer/Demagnetizer |
Insulated Used for magnetizing and demangnetizing steel tools For Items Over 1.35" Length and 1/8" Diameter Wiha 40010 or equal
| 84 |
| 758PR002 |
| Wooden Cuticle/Orange Stick |
| 7" Wooden Cuticle/ Orange Stick |
Non-Resin With Double Beveled Ends 100/Pkg Used for precision work in laboratory applications Techni-Pro 758PR002 Wooden Cuticle/Orange Stick or equal
| 85 |
| 2643 |
| Small Round Nose Pliers |
| Small Round Nose Pliers |
Stainless Steel 4.75" length Smooth 0.906" Jaw Excelta 2643 Pliers or equal
| 86 |
| 2844D |
| Medium Chain Nose Pliers |
| Medium Chain Nose Pliers |
Stainless Steel 5.75" length Serrated 1.182" Jaw Excelta 2844D Pliers or equal
| 87 |
| 2847L |
| Medium Needle Nose Pliers |
| Medium Needle Nose Pliers |
Stainless Steel 6.25" length Smooth, 1.300" Jaw Excelta 2847L Pliers or equal
| 88 |
| 7144E |
| Medium Taper Head Cutter |
| Medium Taper Head Cutter |
Cut Type: Optimum Flush 5.75" length Excelta 7144E Cutter or equal
| 89 |
| 2829 |
| Medium Bent Nose Pliers |
| Medium Pliers |
60 degree Bent Nose Stainless Steel 5.75" length Excelta 2829 Pliers or equal
| 90 |
| 7244E |
| Medium Taper Head Short Handle Cutter |
| Medium Taper Head Cutter |
Cut Type: Optimum Flush Short Handle 4.75" length Excelta 7244E Cutter or equal
| 91 |
| 2842 |
| Pliers Medium Flat Nose |
| Medium Flat Nose Pliers |
Stainless Steel 5.75" length Smooth 1.250" Jaw Excelta 2842 Pliers or equal
| 92 |
| ES105 |
| Isopropyl Alcohol |
| Isopropyl Alcohol |
99.8% IPA
Safe on Plastics 1 Gallon Container
| 93 |
| SMD291AX250T3 |
| Solder Paste |
| Solder Paste |
No Clean, minimal residues Leaded Particle Size: T3 Type 3 90.25% metal content Sn63Pb37 250g Jar Chip Quik SMD291AX250T3 Solder Paste or equal
| 94 |
| 35257 |
| Bottle labeled Acetone |
| Bottle, 6 oz |
One-Touch, Polyethylene, Durastatic, GHS Label with "Acetone" and "Danger" Menda 35257 Bottle or equal
| 95 |
| 101064 |
| Acetone |
| Acetone |
1 gallon
| 96 |
| 34133 |
| Wipes |
| Pop-up Box of white wipes |
196 wipes per Box
| 97 |
| 34155 |
| Small Box of Wipes |
| Small box of 280 wipes per box |
| 20 |
| Box |
| 98 |
| 7700PFTM |
| Medium Box of Gloves |
| Nitrile Gloves |
Color: Black 4 mil thickness Textured Grip Size: Medium 50 gloves per Box Showa 7700PFTM Nitrile Gloves or equal
| 99 |
| 700PFTL |
| Large Box of Gloves |
| Nitrile Gloves |
Color: Black 4 mil thickness Textured Grip Size: Large 50 gloves per Box Showa 7700PFTM Nitrile Gloves or equal
| 100 |
| 7700PFTXL |
| X-Large Box of Gloves |
| Nitrile Gloves |
Color: Black 4 mil thickness Textured Grip Size: X-Large 50 gloves per Box Showa 7700PFTL Nitrile Gloves or equal
| 101 |
| L6134-WH |
| Task Light |
| Task Light |
Light Source: LumiRay LED Arm Type: Classic Arm 38" Reach Mounting: Clamp Base Color: White Dazor L6134-WH or equal
| 102 |
| Tool |
| Acid Brush |
| Acid Brush Horse Hair 3/8" X 6" |
Includes 144 brushes National Novelty Brush ACID BRUSH #1 or equal
| 103 |
| 850WC |
| Cotton Swabs |
| Cotton swabs 6'' with wooden handle |
Pack includes 1000 cotton swabs
| 104 |
| 758IE009 |
| Retractable Knife |
| Retractable Knife |
Blade and Handle Thickness of .080" Aluminium Handle Techni-Pro 758IE009 or equal
| 105 |
| 758IE247 |
| Blade Replacement |
| Blade Replacement |
Blade Thickness of.080" Must be compatible with CLIN 108 Techni-Pro 758IE247 or equal
| 106 |
| CW3500 |
| Conformal Coating Removal Pen |
| Conformal Coating Remover Pen |
Chisel Tip For the removal of acrylic, urethane, and silicon-based conformal coatings CircuitWorks CW3500 Conformal Coating Remover Pen or equal
| 107 |
| CW8500 |
| Soldering Flux |
| Soldering Flux |
Tacky gel 3.5g Syringe with dispensing tip CircuitWorks CW8500 Soldering Flux or equal
| 108 |
| RMA-218 |
| Soldering Flux |
| Soldering Flux 100g High viscosity no-clean flux that can be used for rework, sphere or pin attachment to BGA, CGA and CSP packages, and assembly operations |
| 4 |
| Ea. |
Features:
Deep Reality Viewer (DRV) Display Technology Glasses-free technology to view, capture, and share 3D stereo images Remote connectivity 8.4-700x Magnification Vision Engineering DRV Stereo CAM Microscope Brand Name Only In-Country Warranty
FBI- TEDAC 1: (Fixed) (End User)
| Line Item |
| Model # |
| Product |
| Description (Minimum Specifications) |
| Qty |
| Unit |
| 1 |
| VHX-X1 |
| Microscope Package |
| High Resolution Digital Microscope VHX-X1 |
Includes:
Digital Microscope Controller Win10 PC Console/Manual Fully integrated head Free-angle observation system Motorized Z, 100mm motorized XY 3D Profile Measurement Module 3D Measurement for VHX-X1 High resolution lens 5x to 20x magnification High resolution lens 20x to 100x magnification High resolution lens 100x to 500x magnification Brand Name Only In-Country Warranty
| 2 |
| JBC PHBE-1KB |
| Preheater |
| Rework preheater bed for multi-layered PCBAs |
Two zone preheater (JBC PHBE-1KB ) Includes:
PHBS PCB support PCB support provides 3 height settings: 1.1”, 1.5”, and 1.9” Heating area: 7.1 x 10.9” for 1 zone, 14.2 x 10.9” for 2 zones Four thermocouple connections Temperature range: 120 to 482°F Store up to 22 user profiles (up to 16 steps for each) 3 built-in JBC predefined profiles (2, 3 and 4 steps) Three work modes: power mode, temperature mode and profile mode Brand Name Only In-Country Warranty
| 3 |
| JBC PHSE-1KB |
| Small Preheater Set |
| JBC Tools PHSE-1KB Small Preheater Set, 120V or latest version. |
Designed for rework on small / medium PCBAs Heating area of 130 mm x 135 mm / 5.12" x 5.31" Four thermocouple connections Three work modes: power, temperature, profile 600 watts maximum power Two heating zones Adjustable PCB support has 3 clearance positions: 28 mm, 50 mm or 70 mm / 1.1", 2" or 2.8" Can be synchronized with JBC hot air and soldering stations, as well as fume extractors Brand Name Only In-Country Warranty
| 4 |
| JBC RMSE-1QG |
| Soldering and Desoldering Workstation |
| Soldering and desoldering workstation | Complete Rework System |
Includes:
•Soldering, hot air and vacuum functionality •DDE two channel control unit •JTSE hot air unit and hose set •T245 general purpose iron (tips sold separately) •DR560 desoldering iron (with C560003 nozzle) •MSE-B electric desoldering module
JBC RMSE-1QG
Brand Name Only In-Country Warranty
| 5 |
| JBC C245 |
| Tip Kit |
| Kit composed of tips for soldering and desoldering tools |
C245030 - Conical, 0.3mm C245029 - Bent, 0.4mm C245731 - Chisel, 0.6x0.3mm C245771 - Bent, 0.1mm JBC C245 Tip Kit Brand Name Only
Air Compressors Air Compressor, Low Noise, 60 Gal Capacity, 220 VAC ACGP-02, Newport or equal In-Country Warranty if applicable
| 7 |
| CorePlus SMD |
| Hot Air Rework System |
| Hot air rework system Finetech CorePlus SMD Rework System |
Features:
Data/media logging and reporting function Touch screen interface Sequence control with predefined parameters Placement accuracy better 10 µm Versatile machine platform Customer specific tooling Overlay vision alignment system (VAS) with fixed beam splitter 3-color LED illumination Synchronized control of all process related parameters Software controlled top heater calibration Modular machine platform allows in-field retrofitting during entire service life Individual configurations with process modules Fully manual or semi-automatic machine versions Force controlled component handling Brand Name Only In-Country Warranty
| 8 |
| MV-2009045KG447 |
| Reballing Stencil Set |
| Reballing Stencil |
Set includes:
7 x Stencil net 2 x Adjustment frame 2 x Adjustment piece 1 x Tin scraper 1 x Fixed plate 1 x Holder Martview RB-01 or equal In-Country Warranty if applicable
| 9 |
| Unitron ASH OMNI 3 |
| Digital Microscope |
| Unitron OMNI 3 Digital Microscope System with imaging measurement features |
1080p Digital inspection station with 5D lens system.
Magnification range 2.5X - 68X (on 24" monitor). Up to 136.5X with digital zoom.
Camera resolution - 1080p, 1980 x 1080, 60fps.
195mm working distance (with 5D lens, included).
HDMI output, four USB 2.0 ports, RJ45 Ethernet connector for networking, three general purpose I/O ports, DC 24v power jack.
Internal image storage, removable USB image storage, USB on the go (PC Connectivity).
Integrated LED ring light with intensity control; LED Lamp life approx. 40,000 hours.
Wireless keyboard and wireless mouse included.
HDMI-to-HDMI cable, mini USB cable and USB memory stick included.
Grounding cable included.
Brand Name Only In-Country Warranty
| 10 |
| 205613 |
| Camera Motorized Column |
| Camera Motorized Column |
Kaiser RSP autoDrive 1.5 column with positioning control or equal In-Country Warranty if applicable
| 11 |
| R2N CP |
| Image Capturing Set |
| Image Capturing Set |
•Portable camera stand
• Horizontally adjustable camera arm
• Baseboard with printed fine grid and cm/in scale
• two small light banks, each equipped with a cold light fluorescent lamp. The lamps can be tilted and height adjusted. The angle of vertical arms adjustable by lock joint.
• Fully electronic high-frequency operating system (approx. 40 kHz) for immediate ignition and flicker-free operation
• Mounted with strong die-cast clamp bases.
Kaiser R2N CP Image Capturing Set or equal In-Country Warranty if applicable
| 12 |
| SM-3T-54S-5M |
| Trinocular LED Boom Stand Stereo Zoom Microscope + 5MP Camera |
| AMSCOPE Trinocular LED Boom Stand Stereo Zoom Microscope + 5MP Camera, latest version. |
Features:
7X-45X Super widefield continuous zoom magnification Sharp clear stereo images with great flatness & contrast 54-LED compact ring light with built-in dimmer Sturdy single-arm boom stand covers large working area 5MP digital camera with advanced editing & measuring software for Windows XP/Vista/7/8/10 AMSCOPE Trinocular LED Boom Stand Stereo Zoom Microscope Brand Name Only In-Country Warranty
| 13 |
| IFIXIT 145-307-4 |
| Tech Toolkit |
| iFixit Pro Tech Toolkit |
Inlcudes: Case and Lid with Built-in Sorting Tray Anti-Static Wrist Strap Small Suction Cup 3 opening tools 6 opening picks Tweezers: Nyolon Tipped Reverse, Angled ESD, Blunt ESD Spudgers: Spudger, Halberd Spudger, Metal Spudger Jimmy Tool Flex Extension 64 Bits (4mm) Magnetic Driver Tool Roll Brand Name Only
| 14 |
| IF145-491-1 |
| Magnetic Mat |
| Magnetic Electronic Repair Screws and Parts Organizer |
Strong sheet magnet secures and organizes ferrous (magnetizable) parts.
Curved integrated sorting bins Wedge profile Rollaway-proof dry-erase pen allow for detailed note-taking Non-slip, sturdy foam backing ESD-Safe Dimensions 11.8" x 9.8" x.4"/ 30 x 25 x 1.1cm iFixit Magnetic Mat FixMat or equal
| 15 |
| 82442849 |
| Tweezer set |
| Stainless Steel Tweezer Set |
Includes 6 pieces
FBI- TEDAC 2 Simplified Kit (Mobile) (End User)
| Line Item |
| Model # |
| Product |
| Description (Minimum Specifications) |
| Qty |
| Unit |
| 1 |
| JBC RMSE-1QG |
| Soldering and Desoldering Workstation |
| Soldering and desoldering workstation | Complete Rework System JBC RMSE-1QG |
Includes: Soldering, hot air and vacuum functionality, DDE two channel control unit, JTSE hot air unit and hose set, T245 general purpose iron (tips sold separately), DR560 desoldering iron (with C560003 nozzle), MSE-B electric desoldering module.
Brand Name Only In-Country Warranty
| 2 |
| JBC C245 |
| Tip Kit |
| Kit composed of tips for soldering and desoldering tools |
C245030 - Conical, 0.3mm C245029 - Bent, 0.4mm C245731 - Chisel, 0.6x0.3mm C245771 - Bent, 0.1mm JBC C245 Tip Kit Brand Name Only
| 3 |
| 5110-00-018-0952 |
| Knife Set |
| Knife Set, 3 Knives, 10 Blades, Carrying Case - Sold As 1 Each - Three styles with assorted blades that fit all three knives. - Convenient carrying case |
X-ACTO Knife Set or equal
| 4 |
| IFIXIT 145-307-4 |
| Tech Toolkit |
| iFixit Pro Tech Toolkit |
Inlcudes: Case and Lid with Built-in Sorting Tray Anti-Static Wrist Strap Small Suction Cup 3 opening tools 6 opening picks Tweezers: Nyolon Tipped Reverse, Angled ESD, Blunt ESD Spudgers: Spudger, Halberd Spudger, Metal Spudger Jimmy Tool Flex Extension 64 Bits (4mm) Magnetic Driver Tool Roll Brand Name Only
SENSITIVE BUT UNCLASSIFIED
