Sources Sought Notice - Replace Electrical Panel Motor Center.pdf

1 | P a g e

Sources Sought Notice

Sources Sought Notice: FEMA Region VI Federal Regional Center Replace Electrical Panel Motor Center

1. SOURCES SOUGHT NOTICE (SSN) ONLY

The Department of Homeland Security (DHS), Federal Emergency Management Agency (FEMA), is conducting market research to determine the availability of qualified Contractors who can provide all necessary labor, materials, equipment, and expertise to demolish the existing Electrical Panel Motor Center and replace it with a modernized Electrical Panel Motor Center capable of supporting a power output of 6,000 Metric Million British Thermal Unit (MMBTU). A site visit will be held for market research purposes at the Federal Regional Center, which is located at 800 North Loop Denton, Texas 76209, with a start time of 10:00 AM CST on April 28, 2025, so that contractors are able to assess the workspace in-person. The contractors will gather in the Native Nations Room within the Federal Regional Center at 10:00 AM CST on April 28, 2025, so that they can be escorted to the workspace. All representatives form industry who are interested in participating in the site visit opportunity are required to submit a completed facilities access form to Contract Specialist, Barbara Gonzalez via email to barbara.gonzalez@fema.dhs.gov, and to the Region 6 Procurement Branch, via email to R6-Contracts@fema.dhs.gov, no later than 12:00 PM CST on April 24, 2025. Contractors who are interested are invited to provide responses to the questions that are expressed in section four of this sources sought notice to Contract Specialist, Barbara Gonzalez via email to barbara.gonzalez@fema.dhs.gov, and to the Region 6 Procurement Branch, via email to R6-Contracts@fema.dhs.gov, no later than 11:00 AM CST on May 5, 2025.

The email subject line must contain the following: “Response to Sources Sought Notice, Replace Electrical Panel Motor Center (Denton, Texas)”. Sources Sought Notice responses shall not exceed 7 pages total. Responses shall be prepared on standard 8.5 x 11-inch paper and shall be in Times New Roman, font size (12), with 1” margins. All pages of the response shall be appropriately numbered and identified with the project title that is being referenced in this Sources Sought Notice (which is the Replace Electrical Panel Motor Center Project).

Responses will be used to determine the appropriate strategy for a potential acquisition. Please clearly identify any information your company considers sensitive or proprietary. This notice is issued solely for information and planning purposes - it does not constitute a Request for Proposal (RFP), or a promise to issue an RFP in the future. This notice does not commit the U.S.

Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, or proposals at this time and will not accept unsolicited quotes in response to this Sources Sought Notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in the forthcoming solicitation process.

2. PURPOSE OF THE PROJECT: The Purpose of this project is to demolish an existing electrical panel motor control center in the Federal Regional Center (FRC) located at the Region 6 Denton Campus. The renovations will align the electrical distribution capabilities with energy efficient solutions based on National Electrical Code (NEC) standards.

3. NAICS: 221122 – Electric Power Distribution

2 | P a g e

4. INFORMATION SOUGHT

• Contractor Information

• Contractor Responses to Questions

4.1 Contractor Information:

Contractor Name:

Address:

Contractor point of contact:

Phone number:

Email address:

SAM UEI:

Please indicate business size:

Small Disadvantage Business (SDB)____ 8(a)____ Historically Underutilized Business Zone (HUBZone)____ Service-Disabled Veteran-Owned Small Business (SDVOSB)____ Veteran-Owned Small Business (VOSB)_____ Economically Disadvantaged Women-Owned Small Business (EDWOSB)_____ Women-Owned Small Business concerns (WOSB)_____ Small Business_____ Large Business_____

Contract Vehicles:

Please express if your company possess a Federal Supply Schedule (FSS) under NAICS 221122 Please express if your firm possesses a pre-positioned contract under NAICS 221122 _____

4.2 Inquires to the contractor:

1. Please submit your firm's Capability Statement to Contract Specialist, Barbara Gonzalez, via email to barbara.gonzalez@fema.dhs.gov and the Region 6 Procurement Branch via email to R6-Contracts@fema.dhs.gov no later than 11:00 AM CST on May 5, 2025.

2. Please provide an overview of your firm’s capabilities to fulfill the requirements that are expressed within the attached Statement of Objective (SOO).

3 | P a g e

3. The place of performance is in Denton, Texas. Will your firm be able to provide services in the requested location (which is located at 800 North Loop Denton, TX 76209)?

4. Is your firm actively registered in SAM.gov with the associated NAICS for this effort (221122)?

5. Please provide two examples of relevant past performance history the demonstrates that your firm can provide the requested services.

6. Is your firm willing to attend a site visit for market research purposes? If so, please submit a completed facilities access form to Contract Specialist, Barbara Gonzalez via email to barbara.gonzalez@fema.dhs.gov and the Region 6 Procurement Branch via email to R6-Contracts@fema.dhs.gov. All representatives form industry who are interested in participating in the site visit are required to submit a completed facilities access form no later than 12:00 PM CST on April 24, 2025.

7. Please submit a cost estimate to Contract Specialist, Barbara Gonzalez via email to barbara.gonzalez@fema.dhs.gov and the Region 6 Procurement Branch via email to R6-Contracts@fema.dhs.gov for the Replace Electrical Panel Motor Center project no later than 11:00 AM CST on May 5, 2025.

8. Will your employees be able to pass a federal background check in preparation for badging so there are no escorts required?

9. Is there any additional information that could be included to enhance/improve the SOO? Furthermore, from a technical perspective, what are the additional aspects that the customer should consider while developing this requirement?

Please see the attached documents:

Draft SOO - Replace Electrical Panel Motor Center Facility Access Form