Solicitation - FA670325B0006.pdf

(See ).

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair) IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

9. FOR

INFORMATION CALL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

SOLICITATION

1. SOLICITATION NUMBER

5. REQUISITION/PURCHASE REQUEST NUMBER

CODE

6. PROJECT NUMBER

8. ADDRESS OFFER TO

4. CONTRACT NUMBER

7. ISSUED BY

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

11. The contractor shall begin performance within

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and

b. An offer guarantee

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than

STANDARD FORM 1442 (REV. 12/2022)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d) calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

is, is not required.

local time containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

(date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes copies to perform the work required are due at the place specified in Item 8 by (hour) award, YES NO notice to proceed. This performance period is mandatory negotiable.

calendar days and complete it within calendar days after receiving

a. NAME b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

12b. CALENDAR DAYS

2. TYPE OF SOLICITATION

SEALED BID (IFB)

INVITATION FOR BID

NEGOTIATED (RFP)

REQUEST FOR PROPOSAL

3. DATE ISSUED PAGE OF PAGES

AWARD (To be completed by Government)

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement by the Government in writing within stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

OFFER (Must be fully completed by offeror)

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code)

CODE FACILITY CODE

15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print)

21. ITEMS ACCEPTED:

22. AMOUNT

26. ADMINISTERED BY

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print)

31c. DATE

STANDARD FORM 1442 (REV. 12/2022) BACK

31b. UNITED STATES OF AMERICA

BY

31a. NAME OF CONTRACTING OFFICER (Type or print)

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30b. SIGNATURE 30c. DATE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

copies to issuing office.) Contractor agrees to furnish

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

23. ACCOUNTING AND APPROPRIATION DATA

ITEM

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO THE UNITED STATES

CODE AT

27. PAYMENT WILL BE MADE BY

10 U.S.C. 3204(a) ( ) 41 U.S.C. 3304(a) ( )

20b. SIGNATURE 20c. OFFER DATE

Section A - Solicitation/Contract Form FGWB 23-0002 and FGWB 25-0011 REPLACE GENERATORS

NAICS: 236220

Size Standard: USD 45,000,000.00 Annual receipts

Small Business Type: Small Business Set Aside Percent: 100

Product Service Code: Z1JZ

FA670325B0006

Section B - Supplies or Services & Prices or Costs Additional Information/Notes

Item Supplies / Services Quantity Unit Unit Price Amount

The contractor shall provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment 1 , Drawings (Attachment 2) for Project FGWB 23-0002, REPLACE

GENERATORS FOR FACILITIES BLDG 828,

(GENERATOR, TRANSFER SWITCHES, DEMO)

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

The contractor shall provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment 1 , Drawings (Attachment 2) for Project FGWB 23-0002, REPLACE

GENERATORS FOR FACILITIES BLDG 828,

(3 WAY SWITCHES, LOAD BANK

CONNECTIONS, SURGE PROTECTION)

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor shall provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment 1 , Drawings (Attachment 2) for Project FGWB 23-0002, REPLACE

GENERATORS FOR FACILITIES BLDG

2012, (GENERATOR, TRANSFER

SWITCHES, DEMO) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor shall provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment 1 , Drawings (Attachment 2) for Project FGWB 23-0002, REPLACE

GENERATORS FOR FACILITIES BLDG

2012, (3 WAY SWITCHES, LOAD BANK

CONNECTIONS, SURGE PROTECTION, SIOH

0.257) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

The contractor shall provide all labor, materials, equipment, supervision, and transportation necessary to complete all

Option Line Item requirements/work in accordance with the Specifications (Attachment 1 , Drawings (Attachment 2) for Project FGWB 23-0002, REPLACE

GENERATORS FOR FACILITIES BLDG

2125, (GENERATOR, TRANSFER

SWITCHES, DEMO) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor shall provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment 1 , Drawings (Attachment 2) for Project FGWB 23-0002, REPLACE

GENERATORS FOR FACILITIES BLDG

2125, (3 WAY SWITCHES, LOAD BANK

CONNECTIONS, SURGE PROTECTION) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor shall provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment 1 , Drawings (Attachment 2) for Project FGWB 23-0002, REPLACE

GENERATORS FOR FACILITIES BLDG

2313, (GENERATOR, TRANSFER

SWITCHES, DEMO) This CLIN may be unilaterally exercised by the Government on or before 5 January

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor shall provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment 1 , Drawings (Attachment 2) for Project FGWB 23-0002, REPLACE

GENERATORS FOR FACILITIES BLDG

2313, (3 WAY SWITCHES, LOAD BANK

CONNECTIONS, SURGE PROTECTION) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor is to provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with Specifications (Attachment 3 and Drawings (Attachment 4) for Project FGWB 25-0011, REPLACE

GENERATORS FOR FACILITIES BLDG 550,

(GENERATOR, TRANSFER SWITCHES,

DEMO) This CLIN may be unilaterally exercised by the Government on or

1 Lot before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

Option Line Item

The contractor is to provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment

3) and Drawings (Attachment 4) for Project FGWB 25-0011, REPLACE

GENERATORS FOR FACILITIES BLDG 550,

(MANUAL TRANSFER SWITCH, SURGE

PROTECTION) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor is to provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment

3) and Drawings (Attachment 4) for Project FGWB 25-0011, REPLACE

GENERATORS FOR FACILITIES BLDG

1001, (GENERATOR, TRANSFER

SWITCHES, DEMO) This CLIN may be unilaterally exercised by the Government on or before 5 January2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor is to provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment

3) and Drawings (Attachment 4) for Project FGWB 25-0011, REPLACE

GENERATORS FOR FACILITIES BLDG

1001, (3 WAY SWITCHES, LOAD BANK

CONNECTIONS, SURGE PROTECTION, SIOH

0.257) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor is to provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment

3) and Drawings (Attachment 4) for Project FGWB 25-0011, REPLACE

GENERATORS FOR FACILITIES BLDG

2300, (GENERATOR, TRANSFER

SWITCHES, DEMO) This CLIN may be unilaterally exercised by the Government on or before 5 January2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

The contractor is to provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment

3) and Drawings (Attachment 4) for Project FGWB 25-0011, REPLACE

GENERATORS FOR FACILITIES BLDG

2300, (3 WAY SWITCHES, LOAD BANK

CONNECTIONS, SURGE PROTECTION) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

The contractor is to provide all labor, materials, equipment, supervision, and transportation necessary to complete all requirements/work in accordance with the Specifications (Attachment

3) and Drawings (Attachment 4) for Project FGWB 25-0011, REPLACE

GENERATORS FOR FACILITIES BLDG

2021, (GENERATOR, TRANSFER

SWITCHES, 3 WAY SWITCHES, LOAD BANK

CONNECTIONS, SURGE PROTECTION) This CLIN may be unilaterally exercised by the Government on or before 5 January 2026.

Product Service Code: Z1JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Section C - Description/Specifications/Statement of Work

Requirements PROJECT FGWB 23-0002 REPLACE GENERATORS FOR FACILITIES BLDGS 828, 2012, 2125 and 2313 and FGWB 25-0011, REPLACE GENERATORS FOR FACILITIES BLDGS 550, 1001, 2300 and 2021

Section D - Packaging and Marking

This Section Intentionally Left Blank

Section E - Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.246-12 Inspection of Construction. Aug 1996 Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination

Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Section F - Deliveries or Performance Overall Contract Delivery Period

Line Item Delivery Schedule Quantity Address and POC

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Delivery On Or Before 1 Lot Ship To

Delivery Date 24 Sep 2026 DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Delivery On Or Before 1 Lot Ship To

Delivery Date 24 Sep 2026 DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

Option Line Item

Delivery On Or Before Delivery Date 24 Sep 2026

1 Lot Ship To DoDAAC: F5B323 CountryCode: USA

94MSG CE

AF BPN NO MILSBILLS PROCESSES, 864 INDUSTRIAL DR

DOBBINS AFB, GA 30069-4210

UNITED STATES

Kenneth Jacob Email: kenneth.jacob.1@us.af.mil

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.242-17 Government Delay of Work. Apr 1984 52.247-34 F.o.b. Destination. Jan 1991

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.236-7000 Modification Proposals--Price Breakdown. Dec 1991

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Electronic invoicing.

Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before WAWF training.

submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. WAWF methods of document submission.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this WAWF payment instructions.

contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

2n1

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating Document routing.

payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F87700

Issue By DoDAAC FA6703

Admin DoDAAC FA6703

Inspect By DoDAAC ____

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) F5B323

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance Payment request.

with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

keyonis.shack@us.af.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements This Section Intentionally Left Blank

Section I - Contract Clauses

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.202-1 Definitions. Jun 2020 52.203-3 Gratuities. Apr 1984 52.203-5 Covenant Against Contingent Fees. May 2014 52.203-6 Restrictions on Subcontractor Sales to the Government. Jun 2020 52.203-7 Anti-Kickback Procedures. Jun 2020 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity. May 2014 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity. May 2014 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. Jun 2020 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.

Dec 2023

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Nov 2021

52.204-27 Prohibition on a ByteDance Covered Application. Jun 2023

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded

Jan 2025

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. Oct 2018 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.214-29 Order of Precedence-Sealed Bidding. Jan 1986 52.219-6 Notice of Total Small Business Set-Aside. Nov 2020 52.219-8 Utilization of Small Business Concerns. Jan 2025 52.219-33 Nonmanufacturer Rule. Sep 2021 52.222-3 Convict Labor. Jun 2003 52.222-4 Contract Work Hours and Safety Standards -Overtime Compensation. May 2018 52.222-6 Construction Wage Rate Requirements. Aug 2018 52.222-7 Withholding of Funds. May 2014 52.222-8 Payrolls and Basic Records. Jul 2021 52.222-9 Apprentices and Trainees. Jul 2005 52.222-10 Compliance with Copeland Act Requirements. Feb 1988 52.222-11 Subcontracts (Labor Standards). May 2014 52.222-12 Contract Termination-Debarment. May 2014 52.222-13 Compliance with Construction Wage Rate Requirements and Related Regulations. May 2014 52.222-14 Disputes Concerning Labor Standards. Feb 1988 52.222-15 Certification of Eligibility. May 2014 52.222-35 Equal Opportunity for Veterans. Jun 2020 52.222-36 Equal Opportunity for Workers with Disabilities. Jun 2020 52.222-37 Employment Reports on Veterans. Jun 2020 52.222-40 Notification of Employee Rights Under the National Labor Relations Act. Dec 2010 52.222-50 Combating Trafficking in Persons. Nov 2021 52.222-54 Employment Eligibility Verification. Jan 2025 52.222-55 Minimum Wages for Contractor Workers Under Executive Order 14026. Jan 2022 52.222-62 Paid Sick Leave Under Executive Order 13706. Jan 2022 52.223-5 Pollution Prevention and Right-to-Know Information. May 2024 52.223-21 Foams. May 2024 52.223-23 Sustainable Products and Services. May 2024 52.225-13 Restrictions on Certain Foreign Purchases. Feb 2021 52.226-7 Drug-Free Workplace. May 2024 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.228-2 Additional Bond Security. Oct 1997 52.228-5 Insurance-Work on a Government Installation. Jan 1997 52.228-11 Individual Surety-Pledge of Assets. Feb 2021 52.228-12 Prospective Subcontractor Requests for Bonds. Dec 2022 52.228-14 Irrevocable Letter of Credit. Nov 2014 52.229-3 Federal, State, and Local Taxes. Feb 2013 52.229-12 Tax on Certain Foreign Procurements. Feb 2021 52.232-17 Interest. May 2014 52.232-23 Assignment of Claims. May 2014 52.232-27 Prompt Payment for Construction Contracts. Jan 2017 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-1 Disputes. May 2014 52.233-1 Disputes. (Alternate I) May 2014 Alternate I Dec 1991 52.233-3 Protest after Award. Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim. Oct 2004 52.236-2 Differing Site Conditions. Apr 1984 52.236-3 Site Investigation and Conditions Affecting the Work. Apr 1984 52.236-5 Material and Workmanship. Apr 1984 52.236-6 Superintendence by the Contractor. Apr 1984

52.236-7 Permits and Responsibilities. Nov 1991 52.236-8 Other Contracts. Apr 1984 52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements. Apr 1984 52.236-10 Operations and Storage Areas. Apr 1984 52.236-11 Use and Possession Prior to Completion. Apr 1984 52.236-12 Cleaning Up. Apr 1984 52.236-13 Accident Prevention. Nov 1991 52.236-15 Schedules for Construction Contracts. Apr 1984 52.236-21 Specifications and Drawings for Construction. Feb 1997 52.236-26 Preconstruction Conference. Feb 1995

52.240-1 Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities.

Nov 2024

52.242-13 Bankruptcy. Jul 1995 52.242-14 Suspension of Work. Apr 1984 52.243-4 Changes. Jun 2007 52.244-6 Subcontracts for Commercial Products and Commercial Services. Jan 2025 52.246-21 Warranty of Construction. Mar 1994 52.249-2 Termination for Convenience of the Government (Fixed-Price). Apr 2012 52.249-2 Termination for Convenience of the Government (Fixed-Price). (Alternate I) Apr 2012 Alternate I Sep 1996 52.249-10 Default (Fixed-Price Construction). Apr 1984 52.249-10 Default (Fixed-Price Construction). (Alternate II) Apr 1984 Alternate II Apr 1984

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense-Contract-Related Felonies. Jan 2023 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7003 Control of Government Personnel Work Product. Apr 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. Jan 2023 252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

May 2019

252.222-7006 Restrictions on the Use of Mandatory Arbitration Agreements. Jan 2023 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. Sep 2014 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.

Jan 2023

252.232-7010 Levies on Contract Payments. Dec 2006 252.236-7005 Airfield Safety Precautions. Dec 1991 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.243-7002 Requests for Equitable Adjustment. Dec 2022 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.246-7004 Safety of Facilities, Infrastructure, and Equipment for Military Operations. Oct 2010 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.211-10 Commencement, Prosecution, and Completion of Work. (Tailored) (Apr 1984)

Commencement, Prosecution, and Completion of Work (Apr 1984)

The Contractor shall be required to (a) commence work under this contract within calendar days after the date the Contractor receives the notice to proceed, (b) 10 prosecute the work diligently, and (c) complete the entire work ready for use not later than . Calendar Days* The time stated for completion shall include final 365 cleanup of the premises.

(End of clause)

52.219-14 Limitations on Subcontracting (DEVIATION 2021-O0008) (Oct 2022) Deviation 2021-O0008 (Feb 2023)

LIMITATIONS ON SUBCONTRACTING (FEB 2023) (DEVIATION 2021-O0008)

(a) This clause does not apply to the unrestricted portion of a partial set-aside.

(b) Definition. Similarly situated entity, as used in this clause, means a first-tier subcontractor, including an independent contractor, that--

(1) Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its socioeconomic status); and

(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.

(c) Applicability. This clause applies only to--

(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(2) Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(3) Contracts that have been awarded on a sole-source basis in accordance with subparts 19.8, 19.13, 19.14, and 19.15;

(4) Orders expected to exceed the simplified acquisition threshold and that are--

(i) Set aside for small business concerns under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or

(ii) Issued directly to small business concerns under multiple-award contracts as described in 19.504(c)(1)(ii);

(5) Orders, regardless of dollar value, that are--

(i) Set aside in accordance with subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or

(ii) Issued directly to concerns that qualify for the programs described in subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 19.504(c)(1)(ii); and

(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.

(d) Independent contractors. An independent contractor shall be considered a subcontractor.

(e) Limitations on subcontracting. By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification System (NAICS) code for--

(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding certain other direct costs and certain work performed outside the United States (see paragraph (e)(1)(i)), to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract. The following services may be excluded from the 50 percent limitation:

(i) Other direct costs, to the extent they are not the principal purpose of the acquisition and small business concerns do not provide the service. Examples include airline travel, work performed by a transportation or disposal entity under a contract assigned the environmental remediation NAICS code 562910), cloud computing services, or mass media purchases.

(ii) Work performed outside the United States on awards made pursuant to the Foreign Assistance Act of 1961, or work performed outside the United States required to be performed by a local contractor.

(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;

(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 85 percent subcontract amount that cannot be exceeded; or

(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 75 percent subcontract amount that cannot be exceeded.

(f) The Contractor shall comply with the limitations on subcontracting as follows:

(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause--

[Contracting Officer check as appropriate.]

[X] By the end of the base term of the contract and then by the end of each subsequent option period; or

[ ] By the end of the performance period for each order issued under the contract.

(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.

(g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.

(1) In a joint venture comprised of a small business protégé and its mentor approved by the Small Business Administration, the small business protégé shall perform at least 40 percent of the work performed by the joint venture. Work performed by the small business protégé in the joint venture must be more than administrative functions.

(2) In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work performed by the joint venture. Work performed by the 8(a) participants in the joint venture must be more than administrative functions.

(End of clause)

52.219-28 Postaward Small Business Program Rerepresentation. (Jan 2025)

Postaward Small Business Program Rerepresentation (Jan 2025)

(a) Definitions. As used in this clause-

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (d) of this clause.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (f) of this clause or, if applicable, paragraph (h) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) If the Contractor represented its status as any of the small business concerns identified at 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (f) of this clause or, if applicable, paragraph (h) of this clause, for the NAICS code assigned to an order (except that paragraphs (c)(1) through (3) of this clause do not apply to an order issued under a Federal Supply Schedule contract at subpart 8.4)-

(1) Set aside exclusively for a small business concern identified at 19.000(a)(3) that is issued under an unrestricted multiple-award contract, unless the order is issued under the reserved portion of an unrestricted multiple-award contract ( e.g., an order set aside for a woman-owned small business under a multiple-award contract that is not set-aside, unless the order is issued under the reserved portion of the multiple-award contract);

(2) Issued under a multiple-award contract set aside for small businesses that is further set aside for a specific socioeconomic category that differs from the underlying multiple-award contract ( e.g., an order set aside for a HUBZone small business concern under a multiple-award contract that is set aside for small businesses);

(3) Issued under the part of the multiple-award contract that is set aside for small businesses that is further set aside for a specific socioeconomic category that differs from the underlying set-aside part of the multiple-award contract ( e.g., an order set aside for a WOSB concern under the part of the multiple-award contract that is partially set aside for small businesses); and

(4) When the Contracting Officer explicitly requires it for an order issued under a multiple-award contract, including for an order issued under a Federal Supply Schedule contract (see 8.405-5(b) and 19.301-2(b)(2)).

(d) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(e) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(f) Except as provided in paragraph (h) of this clause, the Contractor shall make the representation(s) required by paragraphs (b) and (c) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, or with its offer for an order (see paragraph (c) of this clause), that the data have been validated or updated, and provide the date of the validation or update.

(g) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (f) or (h) of this clause.

(h) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it [ ] is, [ ] is not a small business concern under 236220NAICS Code assigned to ____contract number.

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1001.

(3) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.] The Contractor represents that it [ ] is, [ ] is not a women-owned small business concern.

(4) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [____The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(5) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The Contractor represents that it [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [____The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __ .]

(6) [Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause. ] The Contractor represents that it [ ] is, [ ] is not a veteran-owned small business concern.

(7) [Complete only if the Contractor represented itself as a veteran-owned small business concern in paragraph (h)(6) of this clause.] The Contractor represents that it [ ] is, [ ] is not a service-disabled veteran-owned small business concern.

(8) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it [ ] is, [ ] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [____The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(9) [ Complete only if the Contractor represented itself as a small business concern in paragraph (h)(1) of this clause.