SF254-01006.pdf

Standard Form PDF 66 KB Posted

Attached to
Low-Cost, Expendable, Launch-Agnostic Space Separation System
Solicitation number
SF254-01006
Issued by

About this file

This document is a federal contracting solicitation topic (SF254-01006) issued by the Department of the Air Force for development of a low-cost, expendable, launch-agnostic space separation system under a Small Business Innovation Research (SBIR) program.

The objective is to develop an expendable separation system for space payload deployment that is compatible with any Launch Service Provider (LSP) and cargo container, prioritizing affordability and reliability without complex or specialized designs. The system must support payload masses in the 1 to 10 metric ton range during atmospheric reentry and post-reentry deployment. Proposed solutions may employ mechanical, electrical, explosive, or other innovative non-traditional methods. Phase I requires demonstration of feasibility through a comprehensive study or concept validation, including preliminary modeling, simulation, or experimental plans; identification of materials and fabrication methods; assessment of manufacturing pathways and Low-Rate Initial Production (LRIP) barriers; and risk mitigation strategies. Phase I deliverables include a feasibility study report, conceptual designs or prototype descriptions, preliminary modeling or test data, manufacturing and fabrication pathways with cost estimates, and identification of technical and production challenges. Phase II focuses on prototype development, rigorous testing in laboratory and operational environments, manufacturability assessment, and recommendations for LRIP and Full-Rate Production (FRP). Phase III dual-use applications aim to demonstrate the system in operational environments for military use by the Department of the Air Force and DoD agencies supporting Rocket Cargo missions, as well as commercial applications for space operators. The technology is ITAR-restricted (22 CFR Parts 120-130) and EAR-controlled (15 CFR Parts 730-774). Offerors must disclose any proposed use of foreign nationals, their countries of origin, visa/work permit types, and SOW tasks. No CMMC level requirement applies. No Technical Point of Contact (TPOC) is listed. References include SpaceX Falcon 9 and Rocket Lab Neutron Payload Users Guides, and existing motorized lightband separation systems.

View the file

Other versions and copies of SF 254

File Revision Posted Attached to
SF254-D1201.pdf Revision not stated Integrated S&T Insight and Co-Investment Decision Support Platform
SF254-D1206.pdf Revision not stated Knowledge-Guided Test and Evaluation Frameworks for proliferated Low Earth Orbit Constellations
SF254-D1207.pdf Revision not stated Affordable IR Sensors for Proliferated LEO Missile Tracking Constellation
SF254-D1205.pdf Revision not stated Technology Maturation to Support Commercial De-Orbit as a Service for pLEO Constellations
SF254-D1204.pdf Revision not stated Secure Multi-Source Data Fusion Environment for pLEO Constellations
SF254-D1101.pdf Revision not stated Low Size, Weight, and Power (SWaP) Radar Warning Receiver Payload
SF254-01005.pdf Revision not stated Affordable Thermal Protection Solution (ARMREST)
SF254-D1002.pdf Revision not stated Project KARMEN: Rapid-Turnaround Spacelift Cargo Test Platform for Empirical Qualification
SF254-D1004.pdf Revision not stated Autonomous Modular Material Handling Equipment for Space Logistics Operations
SF254-01003.pdf Revision not stated Project AXIS 54: AI-Enabled Framework for Space Sustainment Technology Prioritization
SF254-D1003.pdf Revision not stated Virtual Space Cargo Deployment Function for AI-Driven Logistics Planning and Simulation
SF254-01004.pdf Revision not stated Quantum for Space Logistics Demand Planning & Optimization
SF254-D1001.pdf Revision not stated Project ASTROPAC: Intelligent Cargo Configuration and Deployment Planning for Enhanced Readiness
SF254-01001.pdf Revision not stated Autonomous Space Cargo Network (ASCN): AI-Driven Logistics Automation and Digital Twin Integration for Space Mobility
SF254-D1005.pdf Revision not stated Affordable Release Mechanism (ARM)
SF254-01002.pdf Revision not stated Project SpaceKnight: Interactive AI Simulation for USSF Space Sustainment and Contested Logistics Wargaming
SF254-D1006.pdf Revision not stated Real-Time Detection and Tracking of High-Velocity Atmospheric Transits
SF254-D803.pdf Revision not stated Novel Propulsion Solutions for the Very Low Earth Orbit (VLEO) Regime
SF254-D801.pdf Revision not stated Resilient Military Communications (MilCom) – Enhancing MILSATCOM Resilience through Virtualization, Ground Architecture, Situational Awareness, and Data Management
SF254-D804.pdf Revision not stated Magnetically Clean Remote Sensing Satellite for VLEO mapping mission
Show all 20

Who attaches SF 254

Other files

File Type Posted
DAF_SBIR_254_R10_PHI.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SF254-01006: Low-Cost, Expendable, Launch-Agnostic Space Separation System

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Space Platforms

MODERNIZATION PRIORITIES:

Space Technology

KEYWORDS:

1) SpaceX Falcon 9 Payload Users Guide (PUG) - https://www.spacex.com/media/falcon-users-guide-2021-09.pdf.

2) Rocket Lab Neutron Payload Users Guide (PUG) - https://rocketlabcorp.com/assets/Uploads/Rocket-Lab- Neutron-PUG-reduced-final.pdf. 3) Motorized Lightband - https://www.rocketlabusa.com/space-systems/separation-systems/motorized-lightband/. 4) Planetary Systems Corporation Motorized Lightband -https://satsearch.co/products/planetarysystemscorp-mark-ii-motorized-lightband.

ADDITIONAL INFORMATION

N/A

OBJECTIVE:

This topic seeks to develop an expendable low-cost separation system for space payload deployment agnostic of Launch Service Provider (LSP) and cargo container providers. The goal is to create concepts that prioritize affordability and sufficient reliability and quality without resorting to complex or specialized designs. Proposed solutions may include mechanical, electrical, explosive, or other innovative non-traditional methods, emphasizing simplicity and cost-effectiveness.

ITAR:

The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.

DESCRIPTION:

This Phase I effort seeks to develop an expendable, low-cost separation system that is agnostic of Launch Service Providers (LSPs) and cargo container providers. The focus is on minimizing costs while ensuring sufficient reliability and quality without relying on complex or highly specialized designs. Proposed concepts may include mechanical, electrical, explosive, or other non-traditional methods. Emerging technological advancements provide a significant opportunity for the Department of the Air Force (DAF) to enhance Rocket Cargo materiel transport missions through improved post-atmospheric reentry payload deployment. The production of separation systems is inherently complex and costly, with development traditionally limited to a small number of suppliers—restricting innovation and growth in the space industry. This initiative aims to shift away from costly, specialized designs toward innovative approaches in design, fabrication, and testing that support reliable payload survivability in the 1 to 10 metric ton range. The goal is to establish a versatile, expendable separation system compatible with any LSP and cargo container, broadening application across multiple space platforms and reducing the overall expense of payload deployment. Concepts should prioritize simplicity, affordability, and adequate reliability.

PHASE I:

The objective of Phase I is to demonstrate the feasibility of a low-cost Separation System concept or conduct a comprehensive feasibility study assessing Separation System effectiveness relative to cost. This effort should explore innovative approaches that enable low cost, expendable, launch vehicle agnostic Separation System to enable survivability of payloads during atmospheric reentry, particularly for payload masses in the 1 to 10 metric ton range. Offerors should:

- Propose a clear technical approach for a Separation System or feasibility study of the Separation System performance with cost reduction.

- Include preliminary modeling, simulation, or experimental plans to evaluate Separation System characteristics.

- Identify key materials, fabrication methods, and production scalability considerations.

- Provide an initial assessment of manufacturing pathways and potential barriers to Low-Rate Initial Production

(LRIP).

- Discuss potential risks and mitigation strategies related to Separation System performance, manufacturing, or cost.

Deliverables may include:

- A comprehensive feasibility study report detailing Separation System performance relative to cost.

- Conceptual designs or prototype descriptions illustrating the Separation System approach.

- Preliminary Separation System modeling or test data supporting performance claims.

- A manufacturing and fabrication pathway including material choices, production methods, and cost estimates.

- Identification of technical and production challenges, along with proposed solutions for Phase II development.

This Phase I effort will establish a foundational understanding and pathway for advancing the proposed Separation System solution toward LRIP and eventual operational use.

PHASE II:

The Phase II effort will focus on advancing the research and development effort initiated in Phase I. The Phase II project aims at maturing the design and/or concept from the Phase I-like effort and possibly a prototype to conduct research and testing in lab and realistic environments to provide essential data to address any technical challenges, safety concerns, regulatory requirements, and/or other concerns. Awardee(s) should also identify any challenges for Full-Rate Production (FRP).

The Phase II objective is to advance the development and maturation of the Separation System concept developed in Phase I. The goal is to create and demonstrate a prototype capable of meeting Separation System requirements for atmospheric reentry payloads in relevant operational environments, while addressing manufacturability, cost, and safety considerations. Key Goals:

- Develop and refine Separation System designs or concepts based on Phase I findings.

- Fabricate a prototype system suitable for testing in laboratory and realistic operational conditions.

- Conduct rigorous testing to evaluate Separation System performance, structural integrity, durability, and compliance with safety and regulatory standards.

- Address technical challenges identified in Phase I, including material selection, fabrication methods, and integration strategies.

- Assess manufacturability and scalability to enable transition toward Low-Rate Initial Production (LRIP) and Full- Rate Production (FRP).

- Identify and mitigate potential barriers to production, safety, and operational deployment.

Deliverables May Include:

- Detailed prototype design documentation and fabrication plans.

- Test plans and protocols for laboratory and operational environment evaluation.

- Comprehensive test reports documenting Separation System performance, safety, durability, and regulatory compliance.

- Updated risk assessment and mitigation strategies based on test results.

- Manufacturing and production feasibility studies, including cost analysis.

- Recommendations and pathways for LRIP and FRP phases, including any identified production or safety challenges.

PHASE III DUAL USE APPLICATIONS:

The Phase III effort aims to demonstrate the separation system in an operational-like environment and achieve technology maturation and commercialization. The objective of Phase III is to demonstrate the expendable, low-cost separation system in an operational-like environment to achieve full technology maturation and enable commercialization. The effort will focus on validating system performance, reliability, and integration capabilities for both military and commercial space applications. Military Applications:

- Provide the Department of the Air Force (DAF) and other DoD agencies with a reliable, cost-effective separation system compatible with multiple Launch Service Providers (LSPs) and cargo containers.

- Support Rocket Cargo materiel transport delivery missions, rapid deployment scenarios, and other space operations requiring expendable separation solutions.

- Enhance operational agility and reduce lifecycle costs associated with payload deployment and separation.

- Enable scalable production to meet increasing mission demands.

Commercial Applications:

- Facilitate flexible payload integration across a variety of commercial cargo containers and launch platforms.

- Reduce costs for commercial space operators by providing an expendable, simplified separation mechanism that maintains sufficient reliability and quality.

The end goal is to establish a versatile, low-cost, and expendable separation system that broadens the industrial base, reduces mission costs, and supports a wide range of military and commercial space materiel transport operations, fostering innovation and ensuring sustainable space mission success.

REFERENCES:

SpaceX Falcon 9 Payload Users Guide (PUG) - https://www.spacex.com/media/falcon-users-guide-2021- 09.pdf

1.

Rocket Lab Neutron Payload Users Guide (PUG) - https://rocketlabcorp.com/assets/Uploads/Rocket-Lab- Neutron-PUG-reduced-final.pdf

2.

Motorized Lightband - https://www.rocketlabusa.com/space-systems/separation-systems/motorized-lightband/

3.

Planetary Systems Corporation Motorized Lightband -https://satsearch.co/products/planetarysystemscorp-mark-ii-motorized-lightband

4.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .