SF24B-T008.pdf
Standard Form PDF 53 KB Posted
- Attached to
- Self-Regulating Heaters for Satellites
- Solicitation number
- SF24B-T008
About this file
This is a Space Force Research Laboratory (AFRL) Small Business Innovation Research (SBIR) topic solicitation for the development and commercialization of self-regulating heaters for satellite applications.
The objective is to develop positive temperature coefficient (PTC) heaters suitable for use on satellites in any earth orbit, addressing current limitations of existing self-regulating heaters. Required specifications include: setpoint temperature tuning capability between -5°C and 20°C; a 30:1 threshold and 100:1 objective turndown ratio between electrical resistances above and below the setpoint; operation at any voltage between 12 and 100 VDC; heat flux production of 1 to 10 W/in² at full ON condition; and compatibility with thin-film adhesively-applied polyimide heater form factors suitable for installation on orthogonal bend axes (1/8" and 3" bend radius). The heaters must withstand exposure to low earth orbit (LEO) for 5 years, middle earth orbit (MEO) for 10 years, or geosynchronous earth orbit (GEO) for 15 years, including vacuum, ionizing radiation (with 40 mils aluminum shielding threshold or no additional shielding objective), and thermal cycling (60,000 cycles LEO, 15,000 cycles MEO, 6,000 cycles GEO between -5°C and 40°C, plus up to 10 cycles from -40°C to 70°C). The manufacturing process must be scalable using screen printing techniques with minimal installation touch labor. Phase I requires demonstration of feasibility through modeling, analysis, and prototype testing. Phase II requires further development, environmental capability testing, and delivery of 10 functional tested heaters in various sizes and mounting configurations. Phase III involves full flight qualification, product line development, and technology transition to at least one satellite integrator. The technology is restricted under ITAR (22 CFR Parts 120-130) and EAR (15 CFR Parts 730-774), requiring disclosure of any proposed foreign national participation. The contact is Jon Allison, AFRL/RVSV, 505-853-3080, jonathan.allison.1@spaceforce.mil.
View the file
Other versions and copies of SF 24B
| File | Revision | Posted | Attached to |
|---|---|---|---|
| SF24B-T007.pdf | Revision not stated | Finding Guaranteed RL Control for Satellite Systems | |
| SF24B-T005.pdf | Revision not stated | Multiple Hypothesis Management | |
| SF24B-T006.pdf | Revision not stated | Probabilistic 3D Outer Zone Radiation Belt Model | |
| SF24B-T011.pdf | Revision not stated | Into the Wild-Transitioning Basic Rsh Algs to Ops | |
| SF24B-T009.pdf | Revision not stated | Cultivating PWSA Innovations Through Collaboration | |
| SF24B-T004.pdf | Revision not stated | Data-Centric AI in Multi Domain Awareness |
Who attaches SF 24B
| Agency | Files |
|---|---|
| Department of the Air Force Materiel Command | 6 |
| Space Development Agency | 1 |
Other files
| File | Type | Posted |
|---|---|---|
| AF_STTR_24B_v3.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SF24B-T008: Self-Regulating Heaters for Satellites
PROJECTED CMMC LEVEL REQUIREMENT:
N/A
TECHNOLOGY AREAS:
Space Platforms
MODERNIZATION PRIORITIES:
Space Technology
KEYWORDS:
Thermal Control, Thermal Management, Satellites, Heaters, Self-Regulating Heaters
ADDITIONAL INFORMATION
N/A
OBJECTIVE:
The objective of this topic is to develop and commercialize self-regulating (positive temperature coefficient, PTC) heaters for use on satellites in any earth orbit.
ITAR:
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
DESCRIPTION:
Self-regulating heaters are heaters with a designed-in temperature setpoint that exists as a property of the resistor material. They are ‘smart’ heaters, automatically and independently warming each region of the heater circuit to the designed setpoint without a temperature sensor. The electrical resistance of the heater material jumps substantially at the setpoint, inhibiting electric flow and production of heat above the setpoint temperature. Self-regulating heaters are in use in the petrochemical and automotive industries for pipe freeze protection and seat warmers. The space industry needs self-regulating heaters for propellant system heaters where allowable temperature ranges are tight and thermal environments vary in both time and space. Conventional solutions to propellant system thermal control are resource intensive, requiring much engineering design and touch labor as well as much hardware and burdening the flight computer to control the circuits. Self-regulating heaters reduce all of these resource demands. Self-regulating heaters can also provide similar benefits for other satellite heaters such as those for batteries, mechanisms, and antennas.
Existing self-regulating heaters are not suited for space applications for several reasons:
1) the form factor is too large and inflexible: existing self-regulating heaters are a stiff cable while satellite self-regulating heaters must be a thin-film heater such as adhesively-applied polyimide heaters commonly used on satellites. Additionally, these heaters must be suitable to install on two orthogonal bend axes: a 1/8” bend radius and a 3” bend radius, 2) existing self-regulating heaters provide their resistance transition via a melt expansion process to break the percolating path; this means that existing self-regulating heaters cannot be exposed to temperatures greater than their setpoint temperature, 3) Existing self-regulating heaters are not designed to handle the space environment; specifically: vacuum, ionizing radiation, and wide thermal cycles.
This topic solicits proposals to develop and commercialize self-regulating heaters for space applications that address these aforementioned insufficiencies of existing self-regulating heaters. Additionally, the materials design must be capable of tuning during manufacturing of the material for setpoint temperatures between -5 and 20 C. A 30:1 (threshold) and 100:1 (objective) turndown ratio between the electrical resistances above and below the setpoint temperature must be achieved. The technology must be capable of yielding designs operating with any voltage between 12 and 100 VDC, and must be capable of producing designs yielding 1 to 10 W/in2 heat flux at the fully ON condition. Capable to withstand exposure to environments in all of the following orbits: 5 years in low earth orbit (LEO), 10 years in middle earth orbit (MEO), or 15 years in geosynchronous earth orbit (GEO) including vacuum, ionizing radiation, and thermal cycling. Radiation environments should assume the technology receives 40 mils of spacecraft Aluminum shielding (threshold) or no additional shielding (objective); radiation shields incorporated in the heater will be considered but radiation-hardened heater materials are strongly preferred.
Thermal cycles between -5 and 40 C, with LEO 60k cycles, MEO 15k cycles, and GEO 6k cycles. Also survive up to 10 thermal cycles from -40 to 70 C. The material should always remain a solid. The manufacturing process should be scalable, e.g. screen printing techniques; the installation process should minimize touch labor. Proposers must demonstrate a strong intent and capability to commercialize the technology. Proposers are strongly encouraged to form teams with manufacturing partners and systems integrators for technology transition.
PHASE I:
Awardee(s) will demonstrate by modeling and analysis and/or test the feasibility of the concept to meet all requirements. Develop and test the performance of prototype hardware.
PHASE II:
Awardee(s) will further develop the prototype to increase performance, manufacturability and scalability of the hardware. Awardee(s) will test environmental capability of the hardware. The culmination of the Phase II effort shall include the hardware delivery of 10 functional, tested self-regulating heaters demonstrating a variety of sizes and mounting configurations.
PHASE III DUAL USE APPLICATIONS:
Awardee(s) can expect to develop, produce, and bring to market a fully flight qualified self-regulating heater product line; transition the technology to at least one satellite integrator.
REFERENCES:
* 1. *Reference 1. Gilmore, D. G., Spacecraft Thermal Control Handbook Volume I: Fundamental Technologies, 2nd Ed, The Aerospace Press, El Segundo, CA, 2002
1.
* 2. *Reference 2. Arco Engineering. Chromalox Electrical Heat Tracing Systems Design Guide. Retrieved from Arco Engineering
2.
* 3. *Reference 3. Chen, Zheng, et al. "Fast and reversible thermoresponsive polymer switching materials for safer batteries." Nature Energy 1.1 (2016): 15009
3.
* 4. *Reference 4. Dudon, Jean-Paul, et al. "Flexible Self-Regulating heater (FSRH) using PTC effect: A promising technology for future spacecraft thermal control." 46th International Conference on Environmental Systems, 2016. KEYWORDS: Thermal Control, Thermal Management, Satellites, Heaters, Self- Regulating Heaters CONTACT(S): Jon Allison AFRL/RVSV 5058533080 jonathan.allison.1@spaceforce.mil
4.
TECHNICAL POINT OF CONTACT (TPOC):
None
File details come from the government source that posted it. Updated .