SEE 17 35 PAPI - Barricading_Flagging SOW.pdf
PDF 107 KB Posted
- Attached to
- Flagger and Barricading Services Federal contract opportunity
- Solicitation number
- 697DCK-25-R-00144
About this file
This Statement of Work (SOW) outlines flagger and barricading management requirements for the SEE 17 & 35 PAPI Project at Gillespie Field Airport in El Cajon, CA. The contractor must transport and erect FAA-furnished barricades (10"x10"x96" low profile with red lights) along taxiways between 9pm-10pm and remove them between 5am-6am for 29 shifts (Monday-Friday nights). The barricades must be spaced 4' apart, include orange and white reflective striping, and be weighted with water for stability.
The contractor must also provide an airport flagger with minimum 1-year experience to direct traffic between 9pm-6am for the same 29 shifts. All contractor vehicles must have visible yellow flashing lights and company markings. Personnel must complete airport-provided training and possess valid driver's licenses. Optional scope includes pricing for purchasing or renting 125 barricades and 250 red airport hazard lights, including installation. The Department of Transportation Federal Aviation Administration Southwestern Region is the contracting agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 697DCK-25-R-00144 (0002A).pdf | ||
| 697DCK-25-R-00144 (0002).pdf | ||
| Section L and M Revised (0001).pdf | ||
| 697DCK-25-R-00144 (0001).pdf | ||
| Sol_697DCK-25-R-00144.pdf | ||
| Barricade and Flagger Contractor_SOW Attachments.pdf | ||
| San Diego County Davis Bacon Wage Rates.pdf | ||
| 150-5370-2G Construction on Airports.pdf | ||
| Customer Satisfaction Survey.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Scope of Work For
Flagger & Barricading Management Work Related to the SEE 17 & 35 PAPI Project
Relevant Documents
• Advisory Circular 150/5370-2G – Operational Safety on Airports During Construction
Main Scope of Work
1. The contractor shall transport and erect FAA furnished barricades along Taxiways (TWY) as shown in Attachment 1 in between the hours of 9pm and 10pm. The contractor shall remove the barricades at locations shown in Attachment 1 between the hours of 5am and 6am.
Contractor shall provide nightly pricing rates for and total pricing for 29 shifts (Monday nights to Friday nights).
a. Barricades used will be 10”x10”x96” low profile barricades with two mounted red lights.
Barricades will be spaced at 4’ apart. Facing of barricade must be covered with pre-attached orange and white high-intensity reflective striping.
b. Contractor shall use, at their own expense, their own vehicles to haul barricades from project laydown area, located along Joe Crosson Drive in El Cajon, CA, along the haul route shown in attachment 2.
c. All employees driving on the airport must have a valid drivers license and must complete a 1 hour, self-paced training prior to driving on Gillespie Field Airport (SEE).
Training will be sent by SEE Airport Operations via email.
d. All vehicles used on the airfield must have yellow flashing lights mounted on the highest point of the vehicles and said lights must be visible from any direction. Vehicle(s) used on the airfield must have company marking on each side of the vehicle.
e. Barricades must be transported along the route shown in Attachment 2 – Haul Route.
f. Barricades must be weighed with water to prevent displacement. Additional sandbags and/or anchors may be required to hold the barricades in place where exposed to prop wash or jet blast.
2. Contractor shall provide an airport flagger to safely direct traffic between the hours of 9pm and 6am. Contractor to provide pricing on a per shift cost and for 29 total shifts (Monday night through Friday night).
a. Contractor to provide proof of a minimum of 1 year experience as an airport flagger.
b. Flagger must have a valid drivers license and must complete a 1 hour, self-paced training prior to driving on the Gillespie Field Airport. Training will be sent by SEE Airport Operations via email.
c. Flagger vehicle used on the airfield must have yellow flashing lights mounted on the highest point of the vehicles and said lights must be visible from any direction. Vehicle used on the airfield must have company marking on each side of the vehicle.
Optional Scope of Work
1. Price to purchase 125 low profile reflective FAA approved low profile barricade (10”x10”x96”).
Quote shall include cut sheet of barricade for approval.
2. Price to rent 125 low profile reflective FAA approved low profile barricade (10”x10”x96”).
Quote shall include cut sheet of barricade for approval.
3. Price to purchase 250 red airport 360 hazard light, compatible with submitted reflective barricades, solar powered, with rechargeable battery preinstalled. Quote shall include cut sheet of lights for approval. Price shall include the installation of hazard lights on 125 barricades.
4. Price to rent 250 red airport 360 hazard light, compatible with submitted reflective barricades, solar powered, with rechargeable battery preinstalled. Quote shall include cut sheet of lights for approval. Price shall include the installation of hazard lights on 125 barricades.
File details come from the government source that posted it. Updated .