Scope of Services Pumps and Motors~1.docx
DOCX document 14 KB Posted
- Attached to
- SMALL PURCHASE/DHS/Elgin MHC/Pumps and Motors
- Solicitation number
- 22-444DHS-MENTH-B-20232
- Issued by
- Kane County, Illinois
About this file
The provided document is a Scope of Services for an Elgin Mental Health Center contract opportunity in Illinois. The contract is for a vendor to supply various electric motors and pumps on an as-needed basis, with the facility's in-house staff installing the equipment. The motors range from fractional horsepower to 100 horsepower, with voltages from 110V to 480V, used for ventilation fans, pumps for hydronic systems, and ejection pumps. The facility estimates a need for 5 motors and 5 pumps per year. The vendor may also be required to provide up to 50 hours of labor annually to install the supplied equipment.
The contract opportunity is named "SMALL PURCHASE/DHS/Elgin MHC/Pumps and Motors" and is limited to the State of Illinois, with the relevant jurisdictions being Kane County and the City of Elgin. The document does not provide any details on pricing terms, set-asides, incumbents, funding requirements, or other salient commercial information.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FormsASectionV181~26.docx | DOCX document | |
| Mandatory Onsite Visit Guidance for Vendors - Elgin Mental Health Center-1.docx | DOCX document | |
| FormsBSectionV201~34.docx | DOCX document | |
| Standard Terms and Conditions v.20.1~51.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Scope of Services Elgin Mental Health Center Pumps and Motors
Vendor will supply on an as needed basis various electric motors and pumps. Motors and pumps will be installed by in house staff, however, labor may also be requested if needed to install supplied motors and pumps.
Electric motors at the facility vary from fractional horsepower up to 100 horsepower. Motor voltages range from 110 volt, 220 volt, 208 volt and 480 volt. Usage varies from fan motors for ventilation and motors for pumps for hydronic systems and ejection pumps. Hydronic systems also use circulators. Estimated need is 5 motors per year.
Pumps at the facility are used for ejection pits, feedwater pumps, condesate return systems, chilled water and condensed water pumps. Estimated need is 5 pumps per year.
It may be required for the vendor to install some motors and pumps. Estimated hours of labor is 50 hours per year.
File details come from the government source that posted it. Updated .