SBSA_DB_Solicitation_2_Phase_Part I_DEC_2023.pdf
PDF 196 KB Posted
- Attached to
- Design Build for the Birch Bayh Federal Building and U. S. Courthouse Elevator Modernization
- Solicitation number
- 47PF0024R0014
About this file
This is a solicitation for design-build services to modernize elevators in the Birch Bayh Federal Building and U.S. Courthouse in Indianapolis, Indiana. The General Services Administration seeks to award a design-build contract to provide design, engineering, construction, and related services to modernize six passenger elevators and one freight elevator. The modernization scope includes replacing motor generators with solid state drives, installing new destination-based electronic controllers, refurbishing hoistways and machine rooms, replacing cab ceilings and lighting, and performing safety upgrades. The solicitation will utilize a two-phase selection process, with Phase 1 evaluating qualifications and shortlisting up to three offerors to submit proposals in Phase 2. Phase 1 proposals are due by March 5, 2024. Phase 2 proposals will be evaluated for design concept, personnel qualifications and past performance, and management approach. The contract is a total small business set-aside. The estimated price range for the project is $5-10 million. A $26,000 stipend will be paid to unsuccessful Phase 2 offerors.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
GSA Solicitation No. 47PF0024R0014
Document: DB201-1-SB/December 2023 (The Solicitation) Page 1 of 21
Design Build Contract for:
Birch Bayh Federal Building and U.S. Courthouse Elevator Modernization
The Solicitation, Phase 1 - Request for Qualifications
(The Solicitation) Page 2 of 21
Table of Contents I. General Information
A. The Project B. The Solicitation and Contract C. List of Phase 1 Solicitation Documents D. Authorized Representatives E. Pre-Proposal Conference F. Estimated Price Range G. Questions Regarding Phase 1 H. Receipt of Qualifications
II. Proposals A. Proposal Contents B. Proposal Format C. Technical Proposal D. Other Requirements E. Requirements of Joint Venture Offerors
III. General Provisions
A. Availability of Funds B. Requests for Clarification or Interpretation C. Notice to Small Business Firms D. Information Concerning the Disclosure of Solicitation Results E. Affirmative Procurement Program F. Notice Concerning Preparation of Proposals
G. Bond Requirements
H. Contractor Performance Information I. Safeguarding and Dissemination of Controlled Unclassified
Information (CUI) Building Information
IV. FAR/GSAR Solicitation Provisions A. 52.204-29 Federal Acquisition Supply Chain Security Act Orders
Representations and Disclosures (Dec 2023)
V. Additional Solicitation Provisions and Instructions N/A
VI. Method Of Award
A. Evaluation of Phase 1 B. Evaluation of Phase 2 C. Determination of Responsibility D. Price Reasonableness/Price Realism E. Unbalanced Price F. Total Evaluated Price G. Non Price Factors H. Evaluation of Joint Ventures
(The Solicitation) Page 3 of 21
I. General Information
I.A. The Project
This project includes all labor and materials required to provide design, engineering, construction, and other related services necessary to modernize six passenger elevators and one freight elevator in a fully occupied federal courthouse.
The basic modernization scope items include the following:
● Solid State drives to replace existing motor generators.
● New microprocessor Destination based electronic controllers.
● Door operators, wiring, safeties
● Lighting and fan power reduction
● Hoistway refurbishment including hoistway lighting, guide shoes and roller guides replaced
● New machine room control systems, operating panels, feeder cables
● Elevator cab ceilings and lighting systems
● Operational safety feature upgrades to comply with current building codes
● Machine room piping and roof drain location modification if necessary due to new equipment
● New sump pumps or drainage in elevator pits
● Hazardous material abatement as necessary
I.B. The Solicitation and Contract
(1) This procurement is being conducted using the two phase selection process found in FAR 36.3. Qualification proposals will be evaluated in Phase One to determine which offerors will submit proposals for Phase Two. One contract will be awarded using competitive negotiation. In Phase 1, GSA will select a short list of the most highly qualified offerors and request that those offerors submit Phase 2 proposals. All responsible sources may submit a Phase 1 proposal. A maximum of 3 firms will be selected to submit Phase 2 proposals. Only those selected offerors are authorized to submit Phase 2 proposals. Those offerors not selected for participation in Phase 2 will be notified in accordance with FAR 15.503(a).
(2) This Solicitation is set-aside for Small Businesses, in accordance with FAR 19.
This Solicitation sets forth requirements for Phase 1 qualifications proposals and the evaluation factors for Phase 2 proposals for a Contract to construct the Project.
Proposals conforming to the Solicitation requirements will be evaluated in accordance with the Method of Award set forth herein. The Government will award the Contract to the selected Offeror, subject to the conditions set forth herein.
(3) Neither the Solicitation nor any part of an Offeror's proposal shall be part of the Contract except to the extent expressly incorporated therein by the Contracting Officer.
(The Solicitation) Page 4 of 21
I.C. List of Phase 1 Solicitation Documents
The Solicitation Documents are comprised of:
(1) The Solicitation – Phase 1
(2) Offeror Representations and Certifications Form
(3) Standard Form (SF) 1442 – Solicitation Offer and Award
(4) Draft of the Agreement
(5) Past Performance Questionnaire
I.D. Authorized Representatives
The following individuals are designated as the authorized GSA representatives under this Solicitation:
Authorized Representative Information:
Contracting Officer’s Information
Name: Lisa Gonzalez Address: 230 South Dearborn Street, Suite 3500, Chicago, IL 60604 Telephone: 312-882-9511 Email: lisa.gonzalez@gsa.gov
I.E. Virtual Pre-Proposal Conference
A virtual pre-proposal conference will be held on February 8, 2024 at 11:00 am CST.
Prospective attendees are required to pre-register. Please click on this link to complete the registration google form for each attendee https://forms.gle/VRR9jNYgj3ZTzBKB9 (may need to copy & paste the link into your browser). Dial in/connecting instructions will be emailed to those who pre-register by COB on February 7th.
I.F. Estimated Price Range
The estimated price range for the Project is between $5,000,000 and $10,000,000.
I.G. Questions Regarding Phase 1
Submit all questions regarding the Phase 1 to the Contracting Officer on or before February 23, 2024. Any responses provided by GSA will be posted on the Governmentwide Point of Entry (GPE) as an Amendment to the Solicitation.
I.H. Receipt of Qualifications
(1) In order to be considered for Phase 2 and award, Phase 1 qualifications proposals conforming to the requirements of the Solicitation must be received at the following office no later than 3:00 pm CST on the following date and at the following address.
(The Solicitation) Page 5 of 21
Date: March 5, 2024 Address: lisa.gonzalez@gsa.gov
II. Proposals
II.A. Proposal Contents
Proposals shall consist of the following documents, completed and executed in accordance with this Solicitation:
1. Technical Proposal
2. Other Documents as Required
II.B. Proposal Format
Firms having the capability to perform the services will be invited to respond to the RFP posted on the SAM.gov website.
Offerors who then wish to submit an offer will be required to submit one digital copy of their Phase I Proposal. The subject line of the email shall include “47PF0024R0014 Birch Bayh Elevator Modernization Phase 1” followed by the firm(s) name. Emails, including message body, headers, and attachments are limited to 25MB.
Zip files are acceptable, but the following attachment type/extensions are not permitted in any email incoming to GSA, including inside zip files: ade, adp, asx, bas, bat, BHx, cer, chm, cmd, com, cpl, crt, dbx, dll, exe, hta, htp, inf, ins, isp, js, jse, lnk, mda, mde, mdz, msc, msi, msp, mst, nch, pcd, pif, prf, reg, scf, scr, sct, shb, shs, url, vb, vbe, vbs, wms, wsc, wsf, wsh, htm, 7z.
The Phase I Proposal shall not contain more than 50 numbered pages inclusive of the table of contents, charts, exhibits, and any other materials the Offeror deems required for each evaluation factor listed herein for which the offeror is addressing.
Excluded from the 50 page limit, offerors are requested to submit the SF1442, SAM registration verification, acknowledgement of any amendments, and verification of the firms’ VETS-4212 compliance.
II.C. Technical Proposal
Proposals must address the technical approach, technical qualifications, and the other Phase 1 evaluation factors stated herein. Any proposal not meeting all of the following criteria may result in not being further considered for award.
Factor 1: Technical Qualifications of the Firm (40 points)
This evaluation factor considers the extent of the past experience of the General
(The Solicitation) Page 6 of 21
Contractor and A/E members of the Offeror’s Design Build (DB) team. For purposes of this evaluation factor, the term A/E is defined as an individual, firm, partnership, corporation, association, or other legal entity permitted by law to practice the profession of architecture and engineering in the State of Indiana, that will have responsibility for developing detailed design and construction documents. Specifically, this factor considers the specialized experience, technical competence and capability of the Offeror’s Firm and Designer of Record /Architect/Engineer (DOR/A/E) to perform work on similar projects. For purposes of this solicitation Designer of Record refers to the Architect or Engineer bearing the ultimate responsibility for the design. For this factor, Offerors must identify by name both the General Contractor (GC) and the DOR/A/E. If an Offeror consists of more than one GC and/or more than one DOR/A/E, then the Offeror must identify by name its lead GC and its lead DOR/A/E.
Factor 2: Approach to Design-Build (20 points)
This factor considers the Offeror’s approach to establishing a design-build team that will proactively and collaboratively work together to satisfy the Government’s objectives, including the realization of Design and Operational Excellence. For purposes of this evaluation factor, “Design Excellence” refers to GSA’s Design Excellence (DE) Program which seeks a holistic approach (incorporating expertise in many areas, including but not limited to architecture, engineering, historic rehabilitation, sustainability, and construction) that delivers value by producing high-quality, high-performance facilities on budget and on time. The Operational Excellence (OE) program aims to ensure the long-term durability, maintainability, and efficiency of our facilities as well as requires consideration to operation and maintenance costs as part of Design Excellence.
Factor 3: Lead Designer (15 points)
This factor considers the Lead Designer and the Engineer’s portfolio in the context of Design and Operational Excellence and considers the extent of their past experience and the quality of past performance. For purposes of this evaluation factor, the term “Lead Designer and Engineer” means an individual or team who will have the primary responsibility to develop the concept and the project design. For purposes of this evaluation factor, “Design Excellence” and “Operational Excellence” have the same meaning as stated in Evaluation Factor 2.
Factor 4: Past Performance of the Offeror’s Team (25 points)
This factor considers the Offeror’s Past Performance for the projects submitted under evaluation factor number 1, Technical Qualifications of the Firm. This factor considers the extent to which the Offeror’s team has a successful and satisfactory track-record on similar projects. The Offeror’s past performance will be evaluated based on the information provided on the past performance questionnaires and any other sources the Government uses to obtain such information, such as CPARS/FAPIIS and other institutional knowledge of past performance. In the case of the Offeror without a record of relevant past performance or for whom information on past performance is not
(The Solicitation) Page 7 of 21 available, the Offeror may not be evaluated favorably or unfavorably.
The Offeror must submit a Past Performance Questionnaire (PPQ) (included in the solicitation as Attachment), completed by the applicable client, for each project included in its proposal for Factor 4. Completed PPQs should be submitted by the same date as the proposal. Ensure correct phone numbers and email addresses are provided for the client point of contact. Offerors should follow-up with clients/references to ensure timely submittal of questionnaires. If the Offeror is unable to obtain a completed PPQ from a client for a project before proposal closing date, the Offeror should complete and submit with the proposal the first page of the PPQ, which will provide contract and client information for the project. The client must submit a questionnaire directly to the Government's point of contact, via email at lisa.gonzalez@gsa.gov prior to proposal closing date. Offerors may resubmit questionnaires previously submitted with other proposals or may obtain an updated/new PPQ from a client for any submission. Offerors shall not incorporate by reference into their proposal PPQs previously submitted for other RFPs.
Also include performance recognition documents received within the last 10 years, such as awards, award fee determinations, customer letters of commendation, and any other forms of performance recognition. In addition to the above, the Government may review any other sources of information for evaluating past performance. Other sources may include past performance information retrieved through the Contractor Performance Assessment Reporting System (CPARS), using all CAGE/DUNS numbers of team members (partnership, joint venture, teaming arrangement, or parent company/subsidiary/affiliate) identified in the Offeror's proposal, inquiries of owner representative(s), Federal Awardee Performance and Integrity Information System (FAPIIS), Electronic Subcontract Reporting System (eSRS), previously submitted PPQ information, and any other known sources not provided by the Offeror. While the Government may elect to consider data from a variety of sources, the burden of providing detailed, current, accurate and complete past performance information rests with the Offeror. GSA will not maintain a database of PPQs submitted by Offerors.
If the offeror is a joint venture, information submitted for a party to the joint venture will not be evaluated to the extent that the terms of the joint venture agreement limit such party's performance or financial obligations as a party to the Contract contemplated by this Solicitation.
II.D. Other Requirements
(1) Representations and Certifications Offerors are reminded their SAM registration status must be “Active”, at the time their offer is submitted, to be considered for award (see 52.204-7). Offerors submitting a proposal in response to this Solicitation shall complete electronic Annual Representations and Certifications in conjunction with required Entity registration in System for Award Management (SAM), accessed via System for Award Management.
Offerors shall also
(The Solicitation) Page 8 of 21 submit with their proposal, the Annual Representations and Certifications (FAR 52.204- 8), using the attached Offeror’s Representations and Certifications (C301).
(2) Proof of Bonding to $10,000,000.
II.E. Requirements of Joint Venture Offerors
(1) All offers submitted by joint ventures must include a copy of an executed joint venture agreement (with original signatures) which fully discloses the legal identity of each member of the joint venture, the relationship between the members, the form of ownership of each member, and any limitations on liability or authority for each member.
(2) An authorized representative of each member of the joint venture must sign the SF 1442 accompanying an offer regardless of any agency relationship established between the members.
(3) In the case of corporations that are joint venture members, the corporation secretary must certify that the corporation is authorized to participate in the joint venture, either by certifying in the joint venture agreement, or by submitting a separate certification to the Government. The joint venture must also provide a certificate that identifies a principal representative of the joint venture with full authority to bind the joint venture.
(4) Representations and certifications, financial information, and past performance information must be submitted for each member of the joint venture.
III. General Provisions
III.A. Availability of Funds
Issuance of this Solicitation does not warrant that funds are presently available for award of a Contract. Award of the contract shall be subject to the availability of appropriated funds, and the Government shall incur no obligation under this Solicitation in advance of such time as funds are made available to the Contracting Officer for the purpose of contract award.
III.B. Requests for Clarification or Interpretation
The Government will attempt to answer all requests for clarifications or interpretations of the Solicitation Documents prior to the date set for receipt of offers, but do not warrant that all such requests will be answered within 10 calendar days. Prospective Offerors should make such requests not less than 10 calendar days prior to the date set for receipt of offers.
III.C. Notice to Small Business Firms
A program for the purpose of assisting qualified small business concerns in obtaining
(The Solicitation) Page 9 of 21 certain bid, payment, or performance bonds that are otherwise not obtainable is available through the Small Business Administration (SBA) (Small Business Administration). For information concerning SBA's surety bond guarantee assistance, contact your SBA District Office.
III.D. Information Concerning the Disclosure of Solicitation Results
In accordance with FAR 3.104, after receipt of proposals, no information regarding the identity of those submitting offers, the number of offers received, or the information contained in such offers will be made available until after award.
III.E. Affirmative Procurement Program
GSA has implemented an Affirmative Procurement Program (APP) intended to maximize the use of recovered materials, environmentally preferable, and bio-based products.
Offerors should familiarize themselves with the requirements for using and reporting on the use of such materials in performance as set forth in the Agreement. Refer to Clause FAR 52.223-10 encouraging vendors to practice waste reduction.
III.F. Notice Concerning Preparation of Proposals
Offerors are cautioned to carefully read the entire Solicitation and the Agreement to be included in the Contract contemplated by the Solicitation in order to be fully aware of all requirements and clauses in the contemplated Contract. Verify that all blanks requiring information to be supplied in an Offer have been properly filled out, that all pricing and other numerical data is accurately calculated, and that all copies of the Offer contain the same information.
III.G. Bond Requirements (Phase 2 Requirements)
If a bid guarantee is required to be submitted with your offer, any contract awarded will require a performance bond and payment bond as specified in the Agreement. Offerors who utilize individual sureties should note the requirement for a certified, audited, financial statement for each person acting as an individual surety under clause FAR 52.228-1 Bid Guarantee and the requirements of clause FAR 52.228-11 Pledge of Assets.
III.H. Contractor Performance Information
(1) Evaluating Contractor Performance: The General Services Administration is using the Contractor Performance Assessment Reporting System (CPARS) module as the secure, confidential, information management tool to facilitate the performance evaluation process. CPARS enables a comprehensive evaluation by capturing comments from both GSA and the contractor. The website for CPARS is Contractor Performance Assessment
(The Solicitation) Page 10 of 21
Completed CPARS evaluations may then be used by the Federal acquisition community for use in making source selection decisions. CPARS assists acquisition officials by serving as the single source for contractor past performance data
(2) CPARS Registration: Each award requiring an evaluation must be registered in CPARS. The contractor will receive several automated emails. Within thirty days of award, the contractor will receive an e-mail that contains user account information, as well as the applicable contract and order number(s) assigned. Contractors will be granted one user account to access all evaluations.
(3) Contractor CPARS Training: Contractors may sign up for CPARS training. A schedule of classes will be posted to the CPARS training site (CPARS Training) and updated as needed.
(4) Contractor Representative (CR) Role: All evaluations will be sent to the Contractor Representative (CR) named on your award. The CR will be able to access CPARS to review and comment on the evaluation. If your CR is not already in the CPARS system, the contracting officer will request the name and email address of the person that will be responsible for the CR role on your award.
Once an evaluation is ready to be released the CR will receive an email alerting them the evaluation is ready for their review and comment. The email will indicate the time frame the CR has to respond to the evaluation; however, the CR may return the evaluation earlier than this date.
GSA shall provide for review at a level above the contracting officer (i.e., contracting director) to consider any disagreement between GSA and the contractor regarding GSA’s evaluation of the contractor. Based on the review, the individual at a level above the contracting officer will issue the ultimate conclusion on the performance evaluation.
Copies of the evaluations, contractor responses, and review comments, if any, will be retained as part of the contract file.
III.I. Safeguarding and Dissemination of Controlled Unclassified Information (CUI) Building Information
Certain information contained in the Solicitation Documents may have been designated as Controlled Unclassified Information (CUI) building information. With respect to such information, Offerors shall agree to the terms for receipt of such information, as set forth in the provision “Administrative Matters” in Section III of the Agreement, as a condition of receipt of such information.
IV. FAR/GSAR Solicitation Provisions
IV.A. 52.204-29 Federal Acquisition Supply Chain Security Act Orders— Representation and Disclosures. (Dec 2023)
(a) Definitions. As used in this provision, Covered article, FASCSA order, Intelligence
(The Solicitation) Page 11 of 21 community, National security system, Reasonable inquiry, Sensitive compartmented information, Sensitive compartmented information system, and Source have the meaning provided in the clause 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.
(b) Prohibition. Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the prohibition is set out in an applicable Federal Acquisition Supply Chain Security Act (FASCSA) order, as described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.
(c) Procedures. (1) The Offeror shall search for the phrase “FASCSA order” in the System for Award Management (SAM)( https://www.sam.gov) for any covered article, or any products or services produced or provided by a source, if there is an applicable FASCSA order described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.
(2) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM, but are effective and do apply to the solicitation and resultant contract (see FAR 4.2303(c)(2)).
(3) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation.
(d) Representation. By submission of this offer, the offeror represents that it has conducted a reasonable inquiry, and that the offeror does not propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (e).
(e) Disclosures. The purpose for this disclosure is so the Government may decide whether to issue a waiver. For any covered article, or any products or services produced or provided by a source, if the covered article or the source is subject to an applicable FASCSA order, and the Offeror is unable to represent compliance, then the Offeror shall provide the following information as part of the offer:
(1) Name of the product or service provided to the Government;
(2) Name of the covered article or source subject to a FASCSA order;
(3) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Offeror;
(4) Brand;
(5) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);
(6) Item description;
(The Solicitation) Page 12 of 21
(7) Reason why the applicable covered article or the product or service is being provided or used;
(f) Executive agency review of disclosures. The contracting officer will review disclosures provided in paragraph (e) to determine if any waiver may be sought. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise subject to a FASCSA order and may instead make an award to an offeror that does not require a waiver.
(End of provision)
V. Additional Solicitation Provisions and Instructions N/A
VI. Method of Award
VI.A. Evaluation of Phase 1 Proposals
The Government will evaluate Phase 1 proposals based on the following evaluation factors and shortlist a maximum of five offerors to submit Phase 2 proposals.
(1) Factor 1: Technical Qualifications of the Firm (40 points)
(2) Factor 2: Approach to Design-Build (20 points)
(3) Factor 3: Lead Designer (25 points)
(4) Factor 4: Past Performance of the Offeror’s Team (15 points)
VI.B. Evaluation of Phase 2 Proposals
The Government will award a contract resulting from this Solicitation to the responsible Offeror whose offer conforming to the Solicitation will be most advantageous to the Government, Total Evaluated Price and other factors considered. In addition to Total Evaluated Price, the following Phase 2 non-price factors shall be used to evaluate offers:
(1) Factor 1: Quality of Design Concept (50%)
(2) Factor 2: Qualifications, Experience and Past Performance of Key Personnel (25%)
(3) Factor 3: Management Plan and Technical Approach (25%)
VI.C. Determination of Responsibility
In order to be considered responsible, an Offeror must demonstrate that it meets the requirements of FAR 9.104-1. The Contracting Officer's determination of an Offeror's responsibility or non-responsibility may be based upon any information obtained by the Contracting Officer, and is independent of the evaluation of offers set forth herein.
VI.D. Price Analysis and Price Realism Analysis
(The Solicitation) Page 13 of 21
(1) The Contracting Officer will use Price Analysis to analyze the Offeror’s proposal to ensure that the final agreed-to-price is fair and reasonable. In performing Price Analysis, the Contracting Officer may use, singly or in combination with others, the analytical techniques described in FAR 15.404-1, to ensure that the final price is fair and reasonable. The Contracting Officer may request the advice and assistance of other experts to ensure that appropriate Price Analysis is performed.
(2) In addition, the Contracting Officer will use Price Realism Analysis in conjunction with the evaluation of the offeror’s (fill in the appropriate non-price factor) to measure an Offeror's understanding of the requirements and to assess the risk inherent in an Offeror's proposal. Accordingly, Offerors are advised that a business decision to submit significantly low pricing will be considered as reflecting on their understanding or the risk associated with their proposals. Price Realism Analysis will not be used for the purpose of determining the probable cost to the Government.
VI.E. Unbalanced Prices
Offers must include balanced prices. Unbalanced pricing may increase performance risk and could result in payment of unreasonably high prices. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more contract line items is significantly over or understated as indicated by the application of price analysis techniques. All offers with separately priced line items or subline items shall be analyzed to determine if the prices are unbalanced. If price analysis techniques indicate that an offer is unbalanced, the contracting officer shall: (i) Consider the risks to the Government associated with the unbalanced pricing in determining the competitive range and in making the source selection decision; and (ii) Consider whether award of the contract will result in paying unreasonably high prices for contract performance. An offer may be rejected if the contracting officer determines that the lack of balance poses an unacceptable risk to the Government.
VI.F. Total Evaluated Price
Total Evaluated Price shall be calculated using the prices indicated in the Phase 2 Price Proposal using the formula in the Phase 2 Solicitation.
VI.G. Non-Price Factors
Design Build Stage 1 Evaluation Criteria
Factor 1: Technical Qualifications of the Firm (40 points)
Description
This evaluation factor considers the extent of the past experience of the General Contractor and A/E members of the Offeror’s Design Build (DB) team. For purposes of this evaluation factor, the term A/E is defined as an individual, firm, partnership, corporation, association, or other legal entity permitted by law to practice the profession
(The Solicitation) Page 14 of 21 of architecture and engineering in the State of Indiana, that will have responsibility for developing detailed design and construction documents. Specifically, this factor considers the specialized experience, technical competence and capability of the Offeror’s Team and Designer of Record/Architect/Engineer (DOR/A/E) to perform work on similar projects. For purposes of this solicitation Designer of Record refers to the Architect or Engineer bearing the ultimate responsibility for the design. For this factor, Offerors must identify by name both the General Contractor (GC) and the DOR/A/E. If an Offeror consists of more than one GC and/or more than one DOR/A/E, then the Offeror must identify by name its lead GC and its lead DOR/A/E.
Submittal Requirements
Offerors shall address the following in the technical submissions for this evaluation factor:
Similar Projects - Offerors shall provide a list of at least four projects, (two from the DOR/A/E and two from the Construction Contractor) but not to exceed a combined total of six similar projects that are ongoing (at least 75% construction completion) or have been completed within the last ten years of this solicitation issue date. The list shall include projects performed by both the proposed GC and the proposed DOR/A/E; the provided projects do not need to be jointly performed, however, need to represent the experience of the GC and DOR/A/E. Of this group of similar projects, the General Contractor must have served as the prime contractor of at least one project and the DOR/A/E must have had the responsibility for developing the detailed design and construction documents for at least one project. More favorable consideration will be given to those offerors that have similar projects that were completed by teams using the same GC and DOR/A/E as proposed for this solicitation. (The Offeror is defined as the team that serves as the GC and the DOR/A/E). Similar Design Phase Services and Construction Phase Work can be represented by a single project or multiple; multiple projects may be submitted that when combined, demonstrate the contractors aggregate experience demonstrating similar past experience to the solicited project. The contractor is responsible for relaying how the projects submitted under this evaluation factor are similar to the project for which they are submitting a proposal.
In addition to the definition above, for purposes of evaluation, “similar projects” are those that are similar in size and complexity. Projects will be considered more similar if they exhibit some or all of the following characteristics:
● Delivered as Design-Build (DB), Bridging Design-Build (BDB), or Integrated Project Delivery (IPD) methods. For purposes of this evaluation factor, IPD is defined as the execution of the multiparty agreement in which the owner or developer contracted with a single Offeror to provide all, or substantially all, of the design and construction services for that project. Design-Build means combining design and construction in a single contract; the prime contractor could be a single entity, including a Joint Venture consisting of a General Contractor and A/E.
● Has reached substantial completion in the past 10 years
● Contract value at award in excess of $4,000,000
● Complies with P100 standards.
(The Solicitation) Page 15 of 21
● Constrained construction site
● Public building use
● Modernization of elevators in an occupied building
● Restoration or refurbishment of existing original elevator cab materials
● Phased construction
Provide the following information for each “similar” project:
● Companies performing the project (offeror, GC, DOR/A/E)
● Project title and location of the project
● Contract type and Contractor's Responsibilities (Scope of Work)
● Name, current telephone number and email address of the owner’s representative most knowledgeable of the project
● Owner and/or Occupants(s)/Tenant(s)
● Contract number for Federal Government projects
● Contract Cost at Award and Contract Cost at Completion
● Roles of Offeror’s team members on the project (prime or subcontractor/subconsultant)
● Facility details, including type of facility, tenant mission and population, square footage, security level, LEED certification, etc.
● Special Features (Historic Consideration, etc)
● Contract Award Date, Scheduled Contract Completion, actual Date of
Substantial Completion, and the Date of Final Completion
● Modifications - number and total amount that are attributable to unforeseen conditions and/or design deficiencies.
● A Narrative explaining how the characteristics of the submitted project relate to the characteristics of the project described in this solicitation.
● Images of completed work referenced.
Standard for Evaluation
Offerors must identify and relay the similarities of the projects submitted under this factor to the Government’s proposed project.
The standard is met when:
● Offeror provides a minimum of four similar projects, two each for the DOR/A/E and Construction Contractor, of similar size, scope and complexity
● All the required information is provided for each project submitted for review
● The proposal describes the Offeror’s knowledge of local markets, subcontractors and the general labor market in the area where the project will be built.
Factor 2: Approach to Design-Build (20 points)
Description
(The Solicitation) Page 16 of 21
This factor considers the Offeror’s approach to establishing a design-build team that will proactively and collaboratively work together to satisfy the Government’s objectives, including the realization of Design and Operational Excellence. For purposes of this evaluation factor, “Design Excellence” refers to GSA’s Design Excellence (DE) Program which seeks a holistic approach (incorporating expertise in many areas, including but not limited to architecture, engineering, historic rehabilitation, sustainability, and construction) that delivers value by producing high-quality, high-performance facilities on budget and on time. DE further seeks to commission our nation’s most talented constructors, designers, and artists to design, construct, and modernize federal buildings of outstanding quality and value. The “Operational Excellence” program aims to ensure the long-term durability, maintainability, and efficiency of our facilities as well as requires consideration to operation and maintenance costs as part of Design Excellence. These projects are to demonstrate the value of integrated design that balances aesthetics, cost, functionality, constructability, and reliability; creating environmentally superior workplaces for federal employees; and giving contemporary form and meaning to our democratic values.
Submittal Requirements
Each Offeror must submit a written narrative (not to exceed 10 pages) concerning its approach to the DB process. An Offeror may allocate the 10 pages in any manner it chooses.
Standard for Evaluation
The narrative must discuss each of the subjects set forth below; the bullets are not subfactors; rather, they are elements the Government will consider when evaluating the Offeror’s proposal.
(1) Philosophy and Design Intent: The Offeror’s philosophy and design intent as related to the project that is described in the solicitation. Such a discussion may include such topics as parameters that may apply include the modernization of elevators and commitment to integrated and sustainable design. The Offeror’s philosophy and design intent should be characterized by clarity, standard grammar, and the absence of clichés or jargon. The Government expects clear, thoughtful phrases that demonstrate the ability of the team to communicate ideas. The Government will evaluate whether the Offeror’s philosophy and design intent is suitable for this project.
(2) Management Process: The Offeror shall describe their overall management approach to DB and should discuss topics such as; planning, decision making; the lines and methods of communication, interaction with consultants; the means to integrate client and community input; the physical location of major design and production work vs project location; the role of specialty contractors; uses of technology and innovation, cost management, and their ability to control and ensure the maintenance of design quality during design execution and construction. The Government will evaluate the probability that the Offeror’s management process will result in a cohesive and collaborative team effort.
(The Solicitation) Page 17 of 21
(3) Design and Operational Excellence: The Offeror’s approach to supporting and collaborating as a cohesive team in order to realize Design and Operational Excellence.
The Government will evaluate the probability that the Offeror will realize Design and Operational Excellence on this project.
(4) Stipend: Explain how the stipend of $26,000 will be distributed among the team members. The Government will evaluate the extent to which the Offeror will share the stipend in an equitable manner among the team members.
● The Offeror’s philosophy and design intent is suitable for this project;
● There is a satisfactory probability that the Offeror’s management process will result in a cohesive and collaborative team effort;
● There is a satisfactory probability that the Offeror will realize Design and
Operational Excellence on this project; and
● There is a satisfactory probability that the Offeror will share the stipend in an equitable manner among team members.
Additional favorable consideration may be given for any of the following:
● Clearly demonstrated and defined compatible corporate values and corporate philosophies;
● The proven, successful implementation of the Management Process on any of the projects listed under Evaluation Factor 1;
● Entities that have developed a patented process or unique product on which the design-builder intends to rely on performing the project identified in the RFQ; and
● Written, binding agreements between the team members on the equitable distribution of the stipend.
Factor 3: Lead Designer (15 points)
This factor considers the Lead Designer’s portfolio in the context of Design and Operational Excellence and considers the extent of the lead designer’s past experience and the quality of the lead designer’s past performance. This factor also considers the Lead Designer’s philosophy and design intent which considers their flexibility and attitude towards design. For purposes of this evaluation factor, the term “Lead Designer” means an individual or team of designers who will have the primary responsibility to develop the concept and the project design. For purposes of this evaluation factor, “Design and Operational Excellence” has the same meaning as stated in Evaluation Factor 2.
Submittal Requirements
(The Solicitation) Page 18 of 21
Each Offeror must submit the information requested below. The following are not subfactors, but, rather, are elements the Government will consider when evaluating the Offeror’s proposal.
(1) Submit a portfolio representative of the Lead Designer’s ability to provide Design and Operational Excellence and ability to demonstrate innovation and creativity. Address his or her participation in each project.
(2) If the Lead Designer is an individual, submit a portfolio of up to three projects completed in the last 10 years (maximum of 5 five pages per project).
(3) If the Lead Designer is a team, submit a portfolio of up to two completed projects by the lead designer(s) on the team (maximum of 5 five pages per project).
(4) If the Lead Designer is a team, the team should not include more than two individuals.
(5) Each project must include a narrative that addresses the design approach with salient features and discuss how the client's program, functionality, image, mission, economics, schedule, and operational objects were satisfied by the overall design/planning solution. Include tangible evidence such as certificates, awards, or peer recognition demonstrating Design Excellence.
(6) In addition to the page limits above, each Offeror may include:
a. One of the following for each project: a representative floor plan, a site plan, a rendered 3D model, a building section, or other appropriate drawing, and
b. Two pages of photographs for each project.
(7) Identify and describe areas of responsibility and commitment to each project.
Standard for Evaluation
● The submission demonstrates an understanding of the design issues to be addressed in the project identified in the RFQ as evidenced by the projects that the Offeror chose to submit for this evaluation factor;
● The submission portrays creative and appropriate responses to client criteria and needs, demonstrates design leadership, and clearly exemplifies Design Excellence.
Additional favorable consideration may be given for any of the following:
● Lead Designer has a track record of delivering superior quality;
● Lead Designer demonstrates history of dedication to clients with complex building projects;
(The Solicitation) Page 19 of 21
● Designs demonstrate a consistently high level of exploration, rigor, and personal commitment to Design Excellence;
● The portfolio includes a project that is of the same size, scope, and complexity as defined in Evaluation Factor 1.
Factor 4: Past Performance of the Offeror’s Team (25 points)
This factor considers the Offeror’s Past Performance for the projects submitted under evaluation factor number 1, Technical Qualifications of the Firm. This factor considers the extent to which the Offeror’s team has a successful and satisfactory track-record on similar projects. The Offeror’s past performance will be evaluated based on the information provided on the past performance questionnaires and any other sources the Government uses to obtain such information, such as CPARS and other institutional knowledge of past performance. In the case of the Offeror without a record of relevant past performance or for whom information on past performance is not available, the Offeror may not be evaluated favorably or unfavorably.
Information Required
Past Performance Questionnaires:
Offerors shall be responsible for initiating a request for at least one questionnaire for each of the projects submitted as “similar” under Factor 1. The Offeror shall follow the instructions for completing and submitting the Past Performance Questionnaires, which are due no later than the Phase I proposal due date and time. Past Performance can be described as how an Offeror performed on a job. The questionnaire information relates to ratings of the Offeror’s timeliness of performance, cost control, quality of product, business relationship, continuity of personnel, qualification of personnel, etc. Offerors are responsible for ensuring the references provided are willing and available to complete the questionnaires on time, and also willing to be contacted by the Government.
The Government intends for the contractor to contact their references directly, and that the references respond with a completed Past Performance Questionnaire (PPQ) to be submitted directly to the Contracting Officer (CO), prior to the due date of the proposal.
The CO also reserves the right to contact those individuals who provide references for the Offeror to verify that the services provided comply with the similarity requirements of this RFP and to assist with the assessment of the quality of those services provided through a Past Performance Questionnaire. FAR 15.305(a)(2)(iv) states, "In the case of an Offeror without a record of relevant past performance or for whom information on past performance is not available, the Offeror may not be evaluated favorably or unfavorably on past performance." Therefore, failure of the Offeror to provide a minimum of one reference for each “similar” project, and/or the inability of the Government to complete a minimum of two reference checks after making a reasonable effort to do so, may result in the Offeror being rated as "neutral" on the past performance factor. The Government is
(The Solicitation) Page 20 of 21 not required to conduct or complete reference checks on more than the required references for each Offeror. In addition to the references provided by the Offeror, the Government may solicit other sources to find references for other relevant, similar work performed by the Offeror.
The Government also reserves the right to use other government data available in its assessment of the offeror. The quality of the reference information supplied will be considered. In accordance with FAR 15.306, if award will be made without conducting discussions, offerors may be given the opportunity to clarify certain aspects of proposals (e.g., the relevance of an offeror’s past performance information and adverse past performance information to which the offeror has not previously had an opportunity to respond) or to resolve minor or clerical errors.
References indicate projects have been completed by meeting or exceeding the customers’ requirements as set forth in the construction contract documents, within established budgets and on schedule, with a minimum number of Requests for Information (RFIs) resulting in contractor requested modifications. Past performance ratings of Very Good and Excellent will be evaluated more favorably than ratings of Satisfactory. Offerors able to maintain a good relationship with all of the project team members will be evaluated more favorably.
Submittal Requirements
The Offeror must ensure submission of: At least one but no more than two Past Performance Questionnaires (PPQ) (included in the solicitation as Attachment “PBS Past Performance Questionnaire”) for EACH project submitted under Evaluation Factor 1:
Experience in Providing General Construction Services on Similar Projects. References must have thorough knowledge of the details of the Offeror’s performance (such as the Project Manager, Building Owner, or Contracting Official associated with the project) for the majority of the contract performance period, so that the reference may sufficiently respond to the questionnaire.
Offerors should complete and submit with the proposal the first page of the PPQ for each reference, which will provide contract and client information for the project in the event the PPQ is not received by the Contracting Officer at the time proposals are due.
Completed PPQs should be submitted directly to the Contracting Officer. Ensure correct phone numbers and email addresses are provided for the client point of contact.
Offerors should follow-up with clients/references to ensure timely submission of questionnaires. All completed Past Performance Questionnaires shall be submitted via email to lisa.gonzalez@gsa.gov prior to proposal closing date. Offerors shall not incorporate by reference into their proposal PPQs previously submitted for other RFPs.
Offeror may also include performance recognition documents received within the last 10 years, such as awards, award fee determinations, customer letters of commendation, and any other forms of performance recognition. In addition to the above, the Government
(The Solicitation) Page 21 of 21 may review any other sources of information for evaluating past performance. Other sources may include, but are not limited to, past performance information retrieved through the Contractor Performance Assessment Reporting System (CPARS) using all CAGE/DUNS numbers of team members (partnership, joint venture, teaming arrangement, or parent company/subsidiary/affiliate) identified in the Offeror's proposal, inquiries of owner representative(s), Federal Awardee Performance and Integrity Information System (FAPIIS), Electronic Subcontract Reporting System (eSRS), previously submitted PPQ information, and any other known sources not provided by the Offeror. While the Government may elect to consider data from a variety of sources, the burden of providing detailed, current, accurate and complete past performance information rests with the Offeror. GSA will not maintain a database of PPQs submitted by Offerors.
If any problems were encountered on the identified contracts for which the Offeror has submitted references, the contractor may provide a brief narrative describing the nature of the problems and the corrective action taken.
Standard for Evaluation
The standard is met when:
(1) Responses are provided by at least one reference for each project outlined in Factor 1: Technical Qualifications of Firms, and provide favorable evaluations indicating that the projects have met or exceeded the customer's requirements as set forth in the construction contract documents (drawings and specifications) in a timely manner, and within established budgets.
VI.H. Evaluation of Joint Venture Offerors
In the evaluation of responsibility and…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .