SAP Sole or Limited Source Determination.pdf_Redacted.pdf

PDF 1 MB Posted

Attached to
Sole Source - Haas Certified Technician for Maintenance & Repair of Existing Equipment
Solicitation number
H9224025QE048
Issued by

About this file

This document is a Sole or Limited Sources Justification form for a federal acquisition, specifically for a Navy requirement (Purchase Request Number N0007453402). NSWG8 requires a Haas certified technician to provide parts, maintenance, inspection, and perform software updates to a Haas manufactured TM-1P CNC Milling machine and a Haas Maxiem 1530 waterjet. Phillips Corporation Federal Division is identified as the only authorized vendor by Haas, capable of providing the required parts, maintenance, inspection, and software updates for these specific machines without jeopardizing equipment warranties. The Contracting Officer, Matt Morelewski, signed the document on 20 Aug 2025, indicating approval for this limited source procurement.

View the file

Other files

File Type Posted
Solicitation - H9224025QE048.pdf PDF
Attachment 1 - Performance Work Statement.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SOLE or LIMITED SOURCES JUSTIFICATION Determination Memorandum for Acquisitions Over $3,500 but not Exceeding the SAT

All solicitations and orders shall be competed unless a justification to limit competition using an exception in FAR Part 8, 13, or 16, as applicable to the acquisition, is approved by the Contracting Officer. When the customer describes an item or service, which limits the availability to one source or a particular brand name, there must be a technical explanation describing why only that specific one will meet the government’s requirement. Statements must be detailed and identify the harm that would come to the government (e.g. lack of capability or safety impact). The mission partner MUST COMPLETE all questions below, as applicable.

PURCHASE REQUEST OR REQUISITION NUMBER ESTIMATED AMOUNT

1. BRIEF DESCRIPTION OF SUPPLIES OR SERVICES AND THE INTENDED USE.

2. THE CIRCUMSTANCE THAT REQUIRED LIMITING SOURCES TO A SINGLE MANUFACTURER OR SERVICE PROVIDER. (See FAR 8.405- 6(a)(1)(i) and (b)(1) for exceptions that apply to orders under GSA schedules. See FAR 13.106-1(b)(1)(i) for open market purchase exceptions. See FAR 16.505(b)(2)(i) for exceptions that apply to orders against multiple award contracts.)

3. THE RATIONALE THAT SUPPORTS THE EXCEPTION NOTED ABOVE. (e.g., compatibility with existing equipment, specific performance criteria, proprietary data, only one capable, urgency, logical follow on, satisfy minimum guarantee, etc.).

4. IF APPLICABLE, WHY IS THE PROCUREMENT SO URGENT THAT TIME WILL NOT ALLOW FOR ADVERTISING?

5. STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION.

SIGNATURE CODE TELEPHONE NUMBER DATE

Mission Partner Approver (See Approval Levels Below)

CONTRACTING OFFICER

This form may be used in lieu of the determination described in FAR 8.405-6(a)(1)(i), 8.405- 6(b)(2), 13.106-1(b)(1), or 16.505(a)(4).

Mission Partner Approval Levels Ech II ACOS/SA or Deputy Ech III Department Head or Above Ech IV CO, XO, or CMC

TELEPHONE NUMBERCUSTOMER:
DATECUSTOMER:
TELEPHONE NUMBERCONTRACTING OFFICER: 757-763-4431
DATECONTRACTING OFFICER: 20 Aug 2025
2025-08-20T10:39:39-0400
MORELEWSKI.MATTHEW.J.1255227994
5: The Government will continue to monitor the market for changes to circumstances that could remove any barriers to competition.
4: N/A
3: Phillips Corporation Federal Division is the only vendor, authorized by Haas, that can provide the Haas certified technician, capable of providing parts, maintenance, inspection, and preform software updates to a HAAS manufactured TM-1P CNC Milling machine and a Haas manufactured Maxiem 1530 water jet without jeopardizing the equipment warranties.
2: IAW FAR 13.106-1(b)(1)(i) Only One Source Reasonably available.
1: NSWG8 requires a Haas certified technician to provide parts, maintenance, inspection, and preform software updates to a HAAS manufactured TM-1P CNC Milling machine and a Haas Maxiem 1530 waterjet.
REQN: N00074537402
$$:
N Code:
N01: N01C
Classification:

File details come from the government source that posted it. Updated .