SamplePM14815170.pdf
PDF 136 KB Posted
- Attached to
- Forklift Maintenance and Repair
- Solicitation number
- S-10700-00008866
- Issued by
- Marion County, Oregon
About this file
The provided document is a Planned Maintenance Report for a forklift, Unit No. D, belonging to the Department of Administrative Services. The report details various maintenance operations performed on the forklift, including checking the engine, transmission, brakes, hydraulic system, and other components. The report also recommends additional work, such as replacing the PCV valve, spark plugs, and engine oil and filter.
The related state and local contract opportunity is for Forklift Maintenance Services, issued by the Oregon Department of Administrative Services, Procurement Services on behalf of the Oregon Department of Administrative Services, Enterprise Asset Management. The contract seeks to provide forklift maintenance and repair services, though the specific details, quantities, response dates, award dates, and contract term are not provided in the given information.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ATT_D_REFERENCE CHECK FORM~1.doc | DOC document | |
| ATT_G_RESPONSIBILITY INQUIRY~1.doc | DOC document | |
| SamplePOB04424_Executed.pdf | ||
| SamplePapeMaintAgree.pdf | ||
| SampleWorkOrder14815170.pdf | ||
| ATT_B_DISCLOSURE EXEMPTION AFFIDAVIT~1.doc | DOC document | |
| ATT_C_PROPOSER INFORMATION AND CERTIFICATION SHEET~1.doc | DOC document | |
| ATT_F_COBID CERTIFICATION_OUTREACH PLAN~1.doc | DOC document | |
| ATT_H_SAMPLE FORKLIFT MAINTENANCE SCHEDULE CHECK LIST~1.docx | DOCX document | |
| ATT_A_SAMPLE CONTRACT FOR SERVICES~1.docx | DOCX document | |
| ATT_I_TECHNICAL PROPOSAL~1.docx | DOCX document | |
| ATT_E_PRICE PROPOSAL FORM~1.xlsx | XLSX spreadsheet | |
| RFP_S-10700-00008866_Forklift Maintenance Services~2.pdf | ||
| Sole Source Bulletin - Posted 120823.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PLANNED MAINTENANCE REPORT
Hour Meter Reading 865
Date 12/15/22 WO 14815170
1. Blow off truck with air
3. Test drive (mast, brakes, engine, axle)
2. Check start operation (switch and starter)
4. Check engine operation
5. Check Exhaust for noise/visual
6. Check warning light & hour meter oper.
16. Check for engine oil leaks
15. Replace PCV valve
14. Replace spark plugs & check wires
13. Replace distributor cap & rotor
12. Replace engine oil & filter
11. Inspect battery & clean (if needed)
10. Check battery fluid level
9. Compression test (if needed)
8. Check seat and seatbelt condition
7. Check lights and horn operation
17. Service air cleaner
Gas/LP MAINTENANCE OPERATIONS Recommend additional work
Added, Adjusted or cleaned
O.K. or Completed
Elect.
Customer PM DueHysterMakeDepartment of AD Services
Serial No A268N29191U Model E60XN-33 Unit No
- D - Service (2000 hours)ALL- C - Service (1000 hours)- B - Standard PM (250 hours)
18. Check accelerator linkage
19. Check fanbelt & fanblade
20. Drain LPG regulator
21. Check fuel system for leaks
22. Check radiator, cap & hoses
23. Replace thermostat & gasket
24. Check coolant level & protection
25. Replace coolant
26. Check waterpump
27. Check steering gearbox for leaks
28. Check power steering/operation
29. Check steering linkage
30. Check steer axle & cylinder
31. Check brake operation
32. Check brake pedal & freeplay
33. Check parking brake lever operation
34. Check park brake linkage & cables
35.
Remove drive wheels & inspect shoes/wheel cylinders/linkage clean & sand
36. Check brake lines
37. Check brake master cly. & fluid level
38. Check tire air pressure & condition
39. Check hub nut/lug nuts/studs/wheel condition
43. Check inching pedal adjustment with pressure gauge
44. Replace diff. fluid
45. Check diff for noise, fluid level & condition
46. Check wiring harness (visual)
47. Lubricate complete
48. Check elect. control panel/contact tips
49. Check limit switches
50. Check brushes (all motors)
51. Check hydraulic oil level & condition
52. Replace hydraulic filter/oil 2k
53. Clean hydraulic tank breather
54. Check mast rollers/mast rail fit/carriage rollers & fit
55. Check carriage & attachment operation and slides
56. Check for hydraulic leak on mast/cyl.
57. Check mast operation
58.
Check SAS function tilt button/mast function/steer axle lock cylinder & light (if apply)
59. Check hydraulic control valve condition
60. Check hydraulic piping
61. Check forks, lift chains & LBR
62. Steam clean & wipe down thoroughly!!!
40.
Check wheel bearings front & rear clean, repack new seals
41. Replace trans. oil & filter
42. Check trans for noise, fluid level & condition
File details come from the government source that posted it. Updated .