Salient Characteristics for Walk In Freezer (1).pdf
PDF 66 KB Posted
- Attached to
- OUTDOOR WALK IN FREEZER FOR THE TNARNG
- Solicitation number
- W912L7-24-Q-1606
About this file
This document is a combined synopsis/solicitation for a Request for Quote (RFQ) for the replacement of an outdoor walk-in freezer for the Tennessee Army National Guard's Volunteer Training Site-Catoosa. The key requirements include:
The solicitation seeks an outdoor walk-in freezer with minimum dimensions of 7.75' x 13.5' x 7.5', capable of reaching -10°F, and meeting other salient characteristics detailed in the document. The freezer must be supplied, installed, and the existing unit removed and disposed of by the contractor. The solicitation is set-aside for small businesses under NAICS code 333415. Offers are due by August 27, 2024, and the contract will be a firm-fixed-price award. Evaluation factors include technical (meeting salient characteristics), price, and past performance, with technical and past performance being approximately equal to price. The Tennessee Army National Guard is the procuring agency.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| UPDATED QUESTIONS AND ANSWERS W912L724Q1606.docx | DOCX document | |
| SITE PHOTOS.docx | DOCX document | |
| QUESTIONS AND ANSWERS W912L724Q1606.docx | DOCX document | |
| FREQUENTLY ASKED QUESTIONS.docx | DOCX document | |
| COMBINED SYNOPSIS SOLICITATION_RFQ W912L724Q1606_OUTDOOR WALK IN FREEZER FOR THE TNARNG.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for Walk In Freezer
Key Features (at a minimum)
Outdoor Walk In Freezer measuring at least 7.75' x 13.5' x 7.5' minimum temperature required -10 degrees fahrenheit Digital thermometer interior and exterior wall panels made from 26 gauge corrosion resistant steel or galvalume 4" thick foamed in place polyurethane or extruded polystyrene insulation Smooth aluminum floor Floor panels must have minimum R-28 rating or greater Floor panel must have allowable stationary load of 600 pounds per sq. ft when placed on concrete slab Self closing door Deadbolt locking handle on door or independent padlock feature Inside safety release to prevent becoming stuck inside the walk in Minimum door size: 34" x 76" flush mounted with sweep and magnetic gaskets Interior Lighting Interior Shelving Exterior Ramp minimum 18 months parts and labor warranty minimum 5 year compressor warranty Removal of existing walk in freezer, located at VTS-Catoosa Installation of Freezer
Disposal and Installation Requirements:
Contractor's responsibility for labor, materials, and equipment. Unless otherwise specifically noted, the Contractor shall provide and pay for all labor, materials, equipment, and machinery, water, heat, utilities, transportation, and other facilities and services necessary for the proper execution and installation of components provided.
This shall include:
Removal and disposal of one (1) existing freezer
Any repairs needed to concrete pad under existing unit after removal
Uncrating and assembly of new unit at original location
Electrical wiring from walk-in to new compressor unit
Compressor unit must be installed behind the walk in unit and not on top
New safety switch
Charging of new system with coolant
Start-up and testing of new unit
File details come from the government source that posted it. Updated .