S02 EXHIBIT D Calculation of Self Performed Work.pdf

EXHIBIT D: CALCULATION OF SELF-PERFORMED WORK

SUBMITTED IN RESPONSE TO RFP 36C24122R0084 – Replace Boilers in Building 10, VA Medical Center, Providence, RI, Project Number 650-19-100

Use a format similar to the following to identify and calculate cost of the work to be self-performed.

Refer to the definitions pertaining to “Self-performance of work”, “On the Site” and “Total amount of work to be performed under the contract”.

Explain in detail how you will perform the minimum percentage required (25% GC) with your own resources. Note: An offeror who has the capability to perform both as a general contractor and self-perform a major element of construction, for example, prefabricated concrete, may be afforded additional consideration in the evaluation. You should address your general self-performance capability.

(Includes mobilization and utilization of owned or rented plant and equipment to be operated by the prime contractor’s own employees; only those materials which will be both purchased and installed by the prime’s own forces; labor associated with those aforementioned materials or equipment; only those supplies to directly support work performed by the contractor’s own employees; and the contractor’s own job overhead costs.)

Clearly describe the work to be self-performed:

Show Calculation of Self-Performed work: __________________________________

B.1 Total Offer Price: $_________________

B.2 If applying for consideration as a General Contractor (multi-discipline projects) work must be self-performed $_____________

B.3 Subtract G&A, home office overhead, prime contractor’s markups for profit, bond, state use tax, etc.

B.4 Remainder is “Total amount of work to be performed under the Contract” = $__________________

B.5 “Work to be self-performed”: = $ _________________________________ Amount shown on this line should match the amount shown for “Show Calculation of Self-Performed work”? (Includes mobilization and utilization of owned or rented plant and equipment to be operated by the prime contractor’s own employees; only those materials which will be both purchased and installed by the prime’s own forces; labor associated with those aforementioned materials or equipment; only those supplies to directly support work performed by the contractor’s own employees; and the contractor’s own job overhead costs.)

B.6 15 % Self-performed Work = Line B.5 / B.4 X 100% = ________________________%