S02 - Exhibit 2. VMU Bottle Washer Cutsheet.pdf

Ensuring efficient cleaning for all your animal care cages The LYNX Model LYNX 320RS (formerly Scientek SW5100/SW5200) and 340RS (formerly Scientek SW5500) Cage and Bottle Washers are heavy duty and reliable hydro-spray washers designed for ease of use, minimal maintenance, and highest cleanability of caging, bottles, debris pans, and other items used in the care of laboratory animals. These washers deliver high performance within a simplistic design. The system is provided with greater flexibility to meet today’s “green” initiatives and high throughput demands. LYNX standardizes on non-proprietary parts on all equipment.

Standard Features

• Drop-down Door

• Rotating Spray Delivery System

• Personnel Safety Features

• PLC Control System with Full Color HMI Touch Screen

• 10 Configurable Cycles

• Neutralization System

• Automatic Self-cleaning Screen

• Temperature Guarantee

• Insulated Construction

• Incoming Utility Gauges

• Interior Illumination

• SS Recirculation Piping and Components

• Non-proprietary Parts

Construction

LYNX 320RS and 340RS Cage and Bottle Washers are provided with an all stainless steel drop-down door with glass window. Recirculated water is heated by a stainless steel steam coil to achieve guaranteed treatment temperatures.

A color touch screen control panel provides a user-friendly interface for selecting, programming, and monitoring cycles.

Unit is provided with a stainless steel 7½ HP treatment pump with a direct read pump pressure gauge.

Optional Features

• Pass-thru Unit

• Right or Left Hand Services

• House Hot Water Heat Exchanger

• Electric Heat System

• Drain Discharge Cooling - Injected

• Automatic Damper

• Exhaust Fan

• Low Steam Pressure Package

• Devapourmatic System (no exterior exhaust)

• Pass-thru Door Interlock System

• Air Compressor

• Integral Data Collection System

• Printer

• Seismic Tie Down

• Detergent Dispensing Systems

• pH Neutralization Monitoring System

• Direct DI or pure water final rinse

• Barrier Wall Flange(s)

Accessories

• High Capacity Center Header System (accessory)

• Cage Wash Rack

• Bottle Wash Rack

• Transfer Cart

Your Healthcare and Life Science PartnerA Chalmers Group Company

LYNX

Cage & Bottle Washers Model 320RS and 340RS

USB Thumb Drive

Steam Heated

Single Door acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight acocco Highlight

45"

CHAMBER WIDTH

CHAMBER

DEPTH

55 23/32" OA BODY

58 17/32"

14 13/32"

10 17/32"

16 5/16"

52"

48" DOOR OPENING

OA BODY

VIEW WINDOWS

Model Standard Chamber Size Standard Unit Size

320RS1 45" W x 39" H x 36" D 70" W x 73" H x 42" D

340RS2 45" W x 39" H x 52" D 70" W x 73" H x 58" D

Representative Drawing

320RS_340RS Cage and Bottle Washer Sell Sheet_M1037_1.00 2021-0304

Utilities

*CW - Required if drain discharge cool-down package ordered

Washers can be designed to any size to meet your application requirements.

1) 320RS (formerly SCIENTEK SW5100/SW5200) 2) 340RS (formerly SCIENTEK SW5500)

320RS Shown, contact your representative for other model drawings.

Electrical (E) 3-60-208/480/600V, 10 HP

Hot Water (HW) 1" NPT, 35 PSI, 25 GPM @ 120° F ± 5° F

Cold Water (CW)* 3/4" NPT, 35 PSI, 25 GPM @ 50° F ± 5° F

Steam (S) 1" NPT, 60 PSI, Dynamic ± 5 PSI, 350-600 #/Hr Flow Rate

Condensate (C) 3/4" NPT

Air (A) 1/4" NPT, 80-100 PSI, 1-2 CFM Flow Rate

Drain (D) 4" Floor Drain (minimum), 90 GPM Flow Rate

Vent (V) 15" x 41/2" Duct, 400 CFM, Saturated Vapor @ 190° F

Front View

Top View Side View

26 3/32"

45" CHAMBER

WIDTH

39" CHAMBER HEIGHT

58 11/32" OA BODY

41 11/16"

OPEN DOOR

73 9/32" F.F.F

26 1/16"

TRACK

HEIGHT

141 15/16" OPEN DOORS

41 11/16"

OPEN DOOR

Spire-is.com | sales@spire-is.com | 877 679 7800 © Spire Integrated Solutions. All rights reserved.

43 31 32 "

55 5 8 "

73 1 4 "

41 3 4 "

BUILD DRAWING

FOR MARKUP OR APPROVAL

Site condition check list:

- Hot & cold water rough ins

- Floor sink & building drain size

- Compressed air rough in

- Steam connection rough in

- Electrical rough in

- Exhaust duct rough in ( All welded SS duct, sloped back to washer recommended )

- Breather vent containment ( vent hood recommended. No direct connection )

- Ceiling height & wall clearances

- Open door area is clear & correct

- Pathways for entry of washer into building ( A custom split of washer may be required )

- Washer interior sizes are correct:

- 45" - Clear - Left to right

- 40" - Clear - Top to bottom

- 36" - Clear - Front to back

SIGNED:

DATE:

GENERAL NOTES & RECOMMENDATIONS:

-All services to washer ( by others ) must comply with applicable local codes and practices regarding final connections, responsibility herein lies with installation company,and not equipment manufacturer.

-Supply lines to be sized larger than utilities shown to ensure adequate service.

-All connection lines to be provided with appropriate shut offs, connections, & regulators.

-Range indicates minimum/maximum pressures, if supply exceeds maximum, provide a regulator and or pressure release valve prior to connection with machine ( by others ) -Electrical supply should be connected with sealtite flex and a fused panel box.

PLEASE NOTE: DESGIN,DIMENSIONS,AND VALUES SHOWN ARE USED FOR DESIGN AND ESTIMATING PURPOSES AND ARE SUBJECT TO CHANGE BASED ON SITE CONDITIONS AND MACHINE FEATURES.

SOILED SIDE

SERVICE SIDE

Scientek / SW5200 Cage & Bottle Washer

STANDARD FEATURES CONTROL SYSTEM INCLUDES OPTIONS & CONFIGURATIONS ACCESSORIES

STAINLESS STEEL CONSTRUCTION - TYPE 304 -#4 FINISH EXTRA EXHAUST TIME AVAILABILITY WIRE FOR 480 VOLT SUPPLY 480 V-5 MOUSE RACK MR-5

FREE STANDING CABINET C/W INSULATED WASH CHAMBER EMERGENCEY STOP PUSH BUTTON KNOCKED DOWN FOR SHIPPING KD-5

STAINLESS STEEL - PUMP HOUSINGS ALLEN BRADLEY MICROPROCESSOR DRAIN COOL DOWN SYSTEM DCD-5

VIEWING WINDOWS IN EACH DOOR TOUCH SCREEN - OPERATOR INTERFACE DATA LOGGING PORT DLS-5

AUTOMATIC CHEMICAL PUMPS - 3 ONLY TEN PRE-PROGRAMMED WASH CYCLES POV DAMPER POV-5

REMOVABLE FILTER BASKETS TEMPERATURE - ACTUAL & SET POINT INDICATION

MICROPROCESSOR CONTROLLED WASH CYCLES TIME - ACTUAL & PRESET INDICATION

DOOR SAFETY PROTECTION ADJUSTABLE CYCLE TIME & TEMPERATURE SET POINTS

STAINLESS STEEL SUMP HEATER CHANGEABLE CYCLE NAMES

PNEUMATIC CONTROL VALVES CYCLE LOCK OUT CAPABILITY

INTERIOR LIGHT MONITORED ALARM EVENTS ( LOGS FOR 50 EVENTS )

CONTROLS & SERVICE ON RIGHT HAND SIDE TIME & DATE DISPLAY

3 STAGE DRAIN SYSTEM CONTROL SIGNALLING OF UP TO 6 CHEMICAL PUMPS

INTERIOR DIMENSIONS - 45" W X 40" H X 36" DP

D

E

F

C

1 2 3 4

B

A

C

D

A

B

A3

SHEET/DRAWING #:SCALE:

FAB

PART #:

TITLE:

REVISION:DO NOT SCALE DRAWING

DATESIGNATURENAME

DEBURR AND

BREAK SHARP

EDGES

JOB #:UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

TOLERANCES:

LINEAR: 1/32 "

ANGULAR: .5 Deg.

Q.A

MFG

APPV'D

CHK'D

DRAWN

SERIAL #:

E

320RS-SD-RH-STM-480 VJAN 23 24

WEIGHT:

Gulshan

NOTE: ALL LAYOUT DRAWINGS ARE - GOOD SIDE OF MATERIAL UP INVENTORY #:

87654321

S1-320RS-19

CUSTOMER:

PROJECT:

VA JESSE BROWN MEDICAL

CENTER

VA JESSE BROWN MEDICAL

CENTER

E:\Solidworks Washers\5000 WASHERS\SW5000 - JOB FOLDER\JOB# 3655- VA JESSE BROWN- 320RS- SD-LH-STM-480V\JOB #3655- 320RS-SD- RH- STM- 480 V

101461

4/5/2024

GENERAL NOTES & RECOMMENDATIONS:

-All services to washer ( by others ) must comply with applicable local codes and practices regarding final connections, responsibility herein lies with installation company,and not equipment manufacturer.

-Supply lines to be sized larger than utilities shown to ensure adequate service.

-All connection lines to be provided with appropriate shut offs, connections, & regulators.

-Range indicates minimum/maximum pressures, if supply exceeds maximum, provide a regulator and or pressure release valve prior to connection with machine ( by others ) -Electrical supply should be connected with sealtite flex and a fused panel box.

( BASED ON 4 FILLS / CYCLE )

BUILD DRAWING

FOR MARKUP OR APPROVAL

Site condition check list:

- Hot & cold water rough ins

- Floor sink & building drain size

- Compressed air rough in

- Steam connection rough in

- Electrical rough in

- Exhaust duct rough in ( All welded SS duct, sloped back to washer recommended )

- Breather vent containment ( vent hood recommended. No direct connection )

- Ceiling height & wall clearances

- Open door area is clear & correct

- Pathways for entry of washer into building ( A custom split of washer may be required )

- Washer interior sizes are correct:

- 45" - Clear - Left to right

- 40" - Clear - Top to bottom

- 36" - Clear - Front to back

SIGNED:

DATE:

PLEASE NOTE: DESGIN,DIMENSIONS,AND VALUES SHOWN ARE USED FOR DESIGN AND ESTIMATING PURPOSES AND ARE SUBJECT TO CHANGE BASED ON SITE CONDITIONS AND MACHINE FEATURES.

55 23 32 "

44"

41 25 32 "

15" 20 11 32 " 20 11

32 "

9 9 32 "

4 1 2 "

18" CLEAR FOR SERVICE

THIS SIDE ( RECOMMENDED )

45 9

16 " CLEAR

40"

CLEAR

FROM

TRACK

E-STOP

USER INTERFACE

SCREEN

ACCESS

PANEL

DATA

LOGGING

PORT

44"

41 13 16 "

DOOR FULLY

OPEN

26 3 32 "

73 1 4 "

77 3 4 "

DUCT

CONNECTION

A.F.F.

69 13 16 "

7 1/2 HP

MOTOR

NON SERVICE SIDE

BREATHER

VENT

ISO VIEW

PLAN VIEW

REAR VIEW SOILED SIDE VIEW

SERVICE SIDE VIEW

Miscellaneous Engineering Data

CRATED SHIPPING WEIGHT 2040 LBS / 925 KGS

OPERATING WEIGHT C/W WATER 2165 LBS / 982 KGS

CRATED SIZE APPROX. 72" W X 76" H X 94" L

NO. OF SPLITS 2 ( STANDARD )

UNCRATED SIZE - SPLIT # 1 64" W X 59" H X 36" L

UNCRATED SIZE - SPLIT # 2 56" W X 59" H X 36" L

HEAT LOSS 10,000 BTU`S / HR

OPERATING SUMP CAPACITY 18 - GALS US

320RS - Service Requirements & Engineering Data - Steam Machine Circuit Ampacity: 480 Volt - 11.0 Amp - 3 Ph

CHK. # SERVICE CONNECTIONS DYNAMIC PRESSURE RANGE PEAK FLOW RATES CONSUMPTION

X 1 HOT WATER 3/4" NPT - 120 DEG F 30-60 PSIG 15 GPM 36 G/CYCLE

X 2 STEAM 1" NPT 40-60 PSIG 850 LBS / HR 200 LBS / CYCLE

X 3 CONDENSATE - HEAT EXCHANGER 3/4" NPT 2.1 GPM

X 4 CONDENSATE - SUMP HEATER 3/4" NPT 1.0 GPM

X 5 DRAIN / OVERFLOW 2" NPT 232 GPM

X 6 AIR 1/4" NPT 80 - 120 PSIG 1 CU. FT/CYCLE

X 7 ELECTRICAL 1/2" KO @ CONTROL BOX

X 8 SIDE BREATHER VENT 4 1/2" X 10" - INDIRECT CONNECTION 300 TO 500 CFM

X 9 POV EXHAUST VENT 4 1/2" X 15" - DIRECT CONNECTION UP TO 500 CFM

X 10 DRAIN COOLDOWN 3/4" NPT - 60 DEG F MAX 30-60 PSIG 25 GPM 13 G/CYCLE

X 11 FLOOR SINK DRAIN 12"X12"X8" DP 4" PIPE DEICATED (RECOMMENDED)

D

E

F

C

1 2 3 4

B

A

C

D

A

B

A3

SHEET/DRAWING #:SCALE:

FAB

PART #:

TITLE:

REVISION:DO NOT SCALE DRAWING

DATESIGNATURENAME

DEBURR AND

BREAK SHARP

EDGES

JOB #:UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

TOLERANCES:

LINEAR: 1/32 "

ANGULAR: .5 Deg.

Q.A

MFG

APPV'D

CHK'D

DRAWN

SERIAL #:

E

320RS-SD-RH-STM-480 VJAN 23 24

WEIGHT:

Gulshan

NOTE: ALL LAYOUT DRAWINGS ARE - GOOD SIDE OF MATERIAL UP INVENTORY #:

87654321

S1-320RS-19

CUSTOMER:

PROJECT:

VA JESSE BROWN MEDICAL

CENTER

VA JESSE BROWN MEDICAL

CENTER

E:\Solidworks Washers\5000 WASHERS\SW5000 - JOB FOLDER\JOB# 3655- VA JESSE BROWN- 320RS- SD-LH-STM-480V\JOB #3655- 320RS-SD- RH- STM- 480 V

101461

4/5/2024