S02. Drawings - Safety and Security.pdf

PDF 15 MB Posted Aug 12, 2020

Attached to: Y1NB--Renovate Operating Rooms - VAMC Cleveland
Solicitation number: Amend0002
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 10

About this file

Written by GovTribe AI · Dec 28, 2023

This amendment to a federal solicitation provides additional drawings for a renovation project. The Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 10 seeks to renovate operating rooms at the VAMC Cleveland medical center. The purpose of amendment 0002 is to add all drawings related to safety and security considerations for the operating room renovation project. The bid opening date remains September 9, 2020 at 12:00 PM EST, with all other terms of the original solicitation remaining the same. The amendment provides supplemental drawings to inform bids for the operating room renovation at the specified VA medical center location.

View the file

Other files

File	Type	Posted
S02. Drawings - Structural.pdf	PDF	Aug 12, 2020
S06. 36C25020B0022 Amend 0002.docx	DOCX document	Aug 12, 2020
S02. Drawings - Plumbing.pdf	PDF	Aug 12, 2020
S02. Drawings - Mechanical.pdf	PDF	Aug 12, 2020
S02. Drawings - Fire Protection.pdf	PDF	Aug 12, 2020
S02. Drawings - Medical Gas.pdf	PDF	Aug 12, 2020
S02. Drawings - Architectural.pdf	PDF	Aug 12, 2020
S02. Drawings - Technology.pdf	PDF	Aug 12, 2020
S02. Drawings - Electrical.pdf	PDF	Aug 12, 2020

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SECURITY SYSTEM LEGEND

SECURITY CONTROL PANEL - SURFACE MOUNTED

SDP = LENEL SECURITY PANEL

SECURITY CAMERA - FIXED DOME CAMERA CEILING MOUNTED. VARIFOCAL, 80º - 22º VIEWING ANGLE RANGE, NETWORK- ENABLED, 1280 X 800 (1MP) RESOLUTION, H.264 VIDEO COMPRESSION, 30 FRAMES PER SECOND, TAMPERING ALARM, POWER OVER ETHERNET, PROGRESSIVE SCAN, TAMPER RESISTANT CASING. PROVIDE DROP CEILING MOUNTING ACCESSORIES TO MOUNT DOME FLUSH WITH CEILING. DIRECTIONAL ARROW(S) INDICATE GENERAL DIRECTION OF CAMERA'S FIELD OF VIEW.

SECURITY SYSTEM - DURESS-PANIC ALARM PUSHBUTTON - MOUNTED TO UNDERSIDE OF DESK/COUNTER. VERIFY EXACT LOCATION WITH VA POLICE PRIOR TO ROUGH-IN. FURNISHED AND CONNECTED BY CONTRACTOR.

CARDER READER - PROVIDE CARD READER AT ALL ACCESS CONTROLLED DOORS. REFER TO DETAILS FOR TYPICAL INSTALLATION REQUIREMENTS. INSTALL CARD READER AT LOCATION SHOWN IN LIEU OF TYPICAL DETAILS WHEN SHOWN ON

PLANS.

ACCESS CONTROLLED DOOR TYPE 1 - SINGLE DOOR WITH ELECTRIFIED LOCKSET AND HARD-WIRED CARD READER. REFER

TO "ACCESS CONTROLLED DOOR TYPE 1 DETAIL".

ACCESS CONTROLLED DOOR TYPE 2 - DOUBLE DOOR (DOUBLE EGRESS) WITH AUTOMATIC DOOR OPERATOR, HARD-WIRED CARD READER, PUSH PLATES, REQUEST-TO-EXIT MOTION SENSOR, AND MAGNETIC LOCKS. REFER TO "ACCESS CONTROLLED

DOOR TYPE 2 DETAIL".

ACCESS CONTROLLED DOOR TYPE 3 - DOUBLE DOOR (WITH INACTIVE LEAF) WITH HARD-WIRED CARD READER, AUTOMATIC DOOR OPERATOR, PUSH-TO-EXIT BAR, REQUEST-TO-EXIT MOTION SENSOR, AND ELECTRIFIED LOCKSET. REFER TO "ACCESS

CONTROLLED DOOR TYPE 3 DETAIL".

PROVIDE MINIMUM SIZE BACK BOX AS REQUIRED FOR ALL OF THE ABOVE SECURITY DEVICES AND INSTALL IN 3/4"C MINIMUM

COMPLETE CONDUIT SYSTEM TO JUNCTION BOX ABOVE FINISHED CEILING.

REFER TO SPECIFICATIONS DIVISION 28 FOR FURTHER DETAILS REGARDING THE SECURITY SYSTEM.

MOUNT DEVICES AT MOUNTING HEIGHTS LISTED ABOVE UNLESS OTHERWISE NOTED ON THE FLOOR PLANS. COORDINATE EXACT

MOUNTING LOCATION WITH ARCHITECTURAL ELEVATIONS.

ALL SECURITY SYSTEM ROUGH-INS, CONDUIT, WIRING AND EQUIPMENT/DEVICES SHALL BE PROVIDED BY CONTRACTOR.

CONTRACTOR SHALL VERIFY ALL BACKBOX SIXES WITH VA COR AND MANUFACTURER'S INSTALLATION INSTRUCTIONS PRIOR TO

ROUGH-IN.

FURNISH, INSTALL AND CONNECT ALL SECURITY DEVICES IN ACCORDANCE WITH LENEL SYSTEM. PROVIDE ALL ADDITIONAL LENEL COMPONENTS AS NECESSARY FOR A COMPLETE SYSTEM. SUBMIT ALL LENEL DEVICES WITH SHOP DRAWINGS SUBMITTAL

S1.

S2.

S3.

S4.

S5.

S6.

SECURITY SYSTEM NOTES:

FIRE ALARM SYSTEM

FIRE ALARM SYSTEM NOTES:

ALL FIRE ALARM SYSTEM DEVICES SHALL BE CONNECTED COMPLETE TO THE MAIN FIRE ALARM SYSTEM CONTROL PANEL IN ACCORDANCE WITH ENGINEER APPROVED MANUFACTURER'S SHOP DRAWING WIRING DIAGRAMS AND DETAILS. CONTRACTOR SHALL BE RESPONSIBLE FOR PROVIDING A FULLY CODE COMPLIANT FIRE ALARM SYSTEM. DEVICES SHOWN ON PLAN ARE FOR

REFERENCE ONLY.

PROVIDE A 2-GANG MINIMUM SIZE BACKBOX FOR ALL OF THE ABOVE FIRE ALARM DEVICES.

ALL FIRE ALARM SYSTEM CONDUCTORS SHALL BE INSTALL IN 3/4" MINIMUM SIZE COMPLETE CONDUIT SYSTEM WITH COLOR

CODED WIRING AS INDICATED ON SHOP DRAWINGS - MAINTAIN FACILITY COLOR CODING.

ALL NETWORK AND NETWORK CABLES SHALL BE "COMMUNICATION GRADE" TYPE CABLE.

FURNISH, INSTALL AND CONNECT ALL FIRE ALARM DEVICES IN ACCORDANCE WITH WIRING DIAGRAMS PREPARED BY SYSTEM

VENDOR.

EXISTING FIRE ALARM SYSTEM BY NOTIFIER. REFER TO SPECIFICATIONS SECTION 283100 FOR ELECTRICAL REQUIREMENTS.

FIRE ALARM PANELS - MOUNTING INDICATED FOR EACH TYPE.

FACP - FIRE ALARM CONTROL PANEL (TYPE AS INDICATED ON PLANS).

FAAP - FIRE ALARM REMOTE ANNUNCIATOR PANEL - FLUSH MOUNTED AT 5'-0" AFF TO TOP OF DEVICE.

FARA - FIRE ALARM REMOTE ANNUNCIATOR PANEL - FLUSH MOUNTED AT 5'-0" AFF TO TOP OF DEVICE.

FAPS - FIRE ALARM POWER SUPPLY EXTENDER PANEL - CONNECT TO 120V LIFE SAFETY CIRCUIT. SURFACE MOUNTED AT 5'-0" AFF TO TOP OF DEVICE. REFER TO FIRE ALARM SYSTEM RISER DIAGRAM FOR ADDITIONAL INFORMATION AND

WORK REQUIREMENTS.

FATC - FIRE ALARM TERMINAL CABINET

NACX - NOTIFICATION APPLIANCE CIRCUIT EXTENDER

MANUAL FIRE ALARM PULL STATION - MOUNT AT 48" AFF TO CENTERLINE OF DEVICE.

FIRE ALARM VISUAL SIGNAL DEVICE (ADA TYPE) MOUNTED 80" AFF UNLESS NOTED. RED HOUSING WITH WHITE "FIRE"

LETTERING.

FIRE ALARM AUDIBLE VISUAL (SPEAKER/STROBE) SIGNAL DEVICE (ADA TYPE) MOUNTED 80"AFF UNLESS NOTED. RED HOUSING

WITH WHITE "FIRE" LETTERING.

SMOKE DETECTOR - ADDRESSABLE INTELLIGENT PHOTOELECTRIC TYPE - CEILING MOUNTED.

EL - ELEVATOR RECALL

DUCT DETECTOR - ADDRESSABLE INTELLIGENT PHOTOELECTRIC DETECTOR, SAMPLING TUBES AND PROGRAMMABLE RELAY BASE. PROVIDE DUCT DETECTOR TEST/RESET SWITCH WITH REMOTE INDICATOR LAMP FOR EACH DUCT DETECTOR.

(TEST SWITCH MAY NOT BE SHOWN ON PLANS)

MAGNETIC TYPE DOOR HOLDER OUTLET. 24VDC.

PNEUMATICALLY ACTUATED COMBINATION SMOKE/FIRE DAMPER - FURNISHED AND INSTALLED BY THE MC. EC SHALL PROVIDE

(1) CONTROL MODULE AND (1) MONITOR MODULE.

CONTROL MODULE - ADDRESSABLE RELAY FOR CONTROL OF FIRE SMOKE DAMPERS. ELEVATOR RECALL, MAGNETIC DOOR

HOLDERS, AUTOMATIC DOORS, ETC.

MONITOR MODULE - ADDRESSABLE SUPERVISED FOR MONITORING TAMPER SWITCH , FLOW SWITCH, DAMPER POSITION,ETC.

TAMPER SWITCH - MECHANICAL CONTRACTOR SHALL FURNISH AND INSTALL TAMPER SWITCH. ELECTRICAL CONTRACTOR

SHALL PROVIDE MONITOR MODULE AND TEST SWITCH.

FLOW SWITCH - MECHANICAL CONTRACTOR SHALL FURNISH AND INSTALL FLOW SWITCH. ELECTRICAL CONTRACTOR SHALL

PROVIDE MONITOR MODULE AND TEST SWITCH.

F1.

F2.

F3.

F4.

F5.

F6.

ABBREVIATIONS

GENERAL ELECTRICAL SPECIFICATION NOTES:

DEDICATED NEUTRAL CONDUCTORS

AC ABOVE COUNTER AT 9" UNLESS OTHERWISE NOTED

AF AMP FRAME

AFC ABOVE FINISHED CEILING

AFF ABOVE FINISHED FLOOR

AT AMP TRIP

BC BELOW COUNTER AT 18"AFF UNLESS OTHERWISE NOTED

BFC BELOW FINISHED CEILING

CM CEILING MOUNTED

EC ELECTRICAL CONTRACTOR

EG EQUIPMENT GROUND

GC GENERAL CONTRACTOR

GFCI GROUND FAULT CIRCUIT INTERRUPTER

IG ISOLATED GROUND

ITD INFORMATION TECHNOLOGY DEPARTMENT

PROVIDE DEFINITION: FURNISH, INSTALL AND CONNECT COMPLETE.

X EXISTING OUTLET, DEVICE, LIGHTING FIXTURE, CONDUIT, ETC. - TO REMAIN

XB INDICATES EXISTING OUTLET, LIGHTING FIXTURE, CONDUIT, ETC - TO BE REMOVED.

PROVIDE BLANK COVER FOR OUTLET AND MAINTAIN CIRCUIT CONTINUITY.

XL NEW LOCATION OF EXISTING OUTLET, DEVICE, LIGHTING FIXTURE, ETC.

XN EXISTING OUTLET, DEVICE, LIGHTING FIXTURE, ETC. - TO BE REPLACED WITH NEW OF

SPECIFIED TYPE

XR EXISTING OUTLET, DEVICE, LIGHTING FIXTURE, CONDUIT, ETC. - TO BE REMOVED COMPLETE-

MAINTAIN CIRCUIT CONTINUITY TO ADJACENT OUTLETS, EXTEND CONDUIT AND WIRING AS

REQUIRED.

XRR EXISTING OUTLET, DEVICE, LIGHTING FIXTURE, ETC. - TO BE REMOVED AND REINSTALLED

AT NEW LOCATION - EXTEND CONDUIT AND WIRING AS REQUIRED

MC MECHANICAL CONTRACTOR

MLO MAIN LUGS ONLY

NEC NATIONAL ELECTRICAL CODE

NF NOT FUSED

OFE OWNER FURNISHED EQUIPMENT

TC TELECOMMUNICATIONS CONTRACTOR

TCC TEMPERATURE CONTROLS CONTRACTOR

TV TELEVISION

VDC VOICE/DATA CONTRACTOR

VFD VARIABLE FREQUENCY DRIVE

WM WIREMOLD

WP WEATHERPROOF ENCLOSURE - NEMA 4

DEDICATED NEUTRAL CONDUCTORS ARE REQUIRED FOR ALL 120V AND 277V BRANCH CIRCUITS. MULTIWIRE BRANCH

CIRCUITS WITH SHARED NEUTRAL CONDUCTORS ARE NOT PERMITTED.

ROUTE NO MORE THAN (3) BRANCH CIRCUIT HOMERUNS PER EACH CONDUIT RUN.

THE FOLLOWING ITEMS SUPERCEDE ITEMS WITHIN THE SPECIFICATIONS:

ALL FIRESTOPPING MATERIAL SHALL BE MANUFACTURED BY STI. ALL INSTALLERS SHALL BE CERTIFIED INSTALLERS OF STI

FIRESTOPPING PRODUCTS AND HAVE PROOF OF CERTIFICATION.

THE FOLLOWING SYSTEM CABLING IS PERMITTED TO BE INSTALLED IN THE CABLE TRAY SYSTEM:

A. TEL/DATA CABLING

B. HOSPITAL PAGING SYSTEM

ALL OTHER SPECIAL SYSTEMS CABLING (FIRE ALARM) SHALL BE INSTALLED IN A COMPLETE CONDUIT

SYSTEM. E.C SHALL GROUND CABLE TRAY IN ACCORDANCE WITH N.E.C. ARTICLE 250.96.

GENERAL ELECTRICAL INSTALLATION NOTES:

10.

11.

12.

13.

ALL MOUNTING HEIGHTS ARE TO CENTER OF DEVICE UNLESS OTHERWISE NOTED.

ALL NEW WALL MOUNTED ELECTRICAL DEVICES ARE TO BE INSTALLED FLUSH IN WALL UNLESS OTHERWISE NOTED.

ALL ELECTRICAL CONDUIT SHALL BE CONCEALED BEHIND FINISHED WALLS AND ABOVE FINISHED CEILING UNLESS OTHERWISE NOTED. THE COST TO CUT AND PATCH WALLS SHALL BE THE RESPONSIBILITY OF THE TRADE REQUIRING

THE CUTTING.

CONTRACTOR IS RESPONSIBLE FOR REMOVAL AND REPLACEMENT OF CEILINGS REQUIRED FOR ELECTRICAL WORK.

CONTRACTOR SHALL REPLACE ANY DAMAGED CEILING TILES.

PRIOR TO INSTALLATION, VERIFY PRECISE LOCATION OF NEW OR RELOCATED WALL OR CEILING MOUNTED DEVICES

WITH ARCHITECTURAL ELEVATIONS AND REFLECTED CEILING PLANS.

COORDINATE ALL SHUT-DOWNS OF EXISTING ELECTRICAL SYSTEMS WITH OWNER A MINIMUM OF FOURTEEN (14) WORKING DAYS IN ADVANCE. ALL SHUT-DOWNS SHALL OCCUR DURING WEEKENDS OR BETWEEN 8:00PM AND 7:00AM

ON WEEKDAYS ("OFF-HOURS"). INCLUDE ALL PREMIUM TIME CHARGES IN BID.

ALL NOISE GENERATING OPERATIONS, INCLUDING CUTTING OF CEILINGS, WALLS AND FLOORS, CORING, DRILLING, ETC. SHALL BE SCHEDULED DURING WEEKENDS OR BETWEEN 8:00PM AND 7:00AM ON WEEKDAYS ("OFF-HOURS").

INCLUDING ALL PREMIUM TIME CHARGES IN BID.

CONTRACTOR SHALL CONNECT ALL MECHANICAL EQUIPMENT COMPLETE PER MANUFACTURER'S WIRING DIAGRAMS AND INSTRUCTIONS. COORDINATE WITH MECHANICAL CONTRACTOR AND VERIFY LOCATION, VOLTAGE, AMPS, NO. OF WIRES, AND PROTECTION REQUIREMENTS PRIOR TO ROUGH-IN. CONTACT ENGINEER WITH ANY DISCREPANCIES

FROM DESIGN DRAWINGS.

PROVIDE LIQUID-TIGHT FLEXIBLE METAL CONDUIT FOR FINAL CONNECTION TO MECHANICAL EQUIPMENT OR OTHER

EQUIPMENT WHICH MAY PROPAGATE VIBRATION.

ALL FLUORESCENT LAMPS THAT WILL NOT BE REUSED SHALL BE DISPOSED OF IN ACCORDANCE WITH EPA STANDARDS, AND WRITTEN EVIDENCE OF PROPER DISPOSAL SHALL BE FURNISHED TO THE OWNER.

ALL WORK SHALL BE PERFORMED IN STRICT CONFORMANCE WITH THE PHASING REQUIREMENTS OF THE PROJECT.

ALL COSTS ASSOCIATED WITH THESE REQUIREMENTS SHALL BE INCLUDED IN THE BID SUBMITTAL.

CONTRACTOR IS RESPONSIBLE FOR PROVIDING TEMPORARY LIGHTING TO ADEQUATELY LIGHT ALL CONSTRUCTION AREAS, TEMPORARILY PARTITIONED AREAS, AND EXIT CORRIDORS MAINTAINED DURING CONSTRUCTION.

DEFINITION: "PROVIDE" - FURNISH, INSTALL AND CONNECT COMPLETE.

PROJECT AND PHASING SCOPE LINES INDICATE WHERE GENERAL CONSTRUCTION BOUNDARIES OCCUR. ELECTRICAL

WORK AND UTILITY TIE-INS MAY OCCUR OUTSIDE OF SCOPE LINES.

C. NURSE CALL CABLING

D. CATV

COR CONTRACTING OFFICER'S REPRESENTATIVE

GENERAL LEGEND:

CODED NOTE - "1" INDICATES NOTE NUMBER

REVISION REFERENCE NUMBER

MECHANICAL EQUIPMENT IDENTIFIER

DETAIL REFERENCE - "1" INDICATES DETAIL NUMBER, "E0.1" INDICATES DRAWING NUMBER

COLUMN REFERENCE GRID

INDICATES EXISTING CONSTRUCTION WALL TYPE

INDICATES DEMOLITION WALL TYPE

INDICATES NEW CONSTRUCTION WALL TYPE

GB1

E0.1

59459

M.P. LONG

O F

G E

ERT

L EA

E I N

F OO

FREDRICK, FREDRICK & HELLER

ENGINEERS, INC.

672 EAST ROYALTON ROAD

BROADVIEW HTS., OHIO 44147

TEL. (440) 546-9696

FAX: (440) 546-9699

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

1DESIGN AND CONSTRUCTION DOCUMENTS AS

INSTRUMENTS OF SERVICE ARE GIVEN IN

CONFIDENCE AND REMAIN THE PROPERTY OF

PERSPECTUS ARCHITECTURE. THE USE OF THIS

DESIGN AND THESE CONSTRUCTION

DOCUMENTS FOR PURPOSES OTHER THAN THE

SPECIFIC PROJECT NAMED HEREIN IS STRICTLY

PROHIBITED WITHOUT THE EXPRESSED

WRITTEN CONSENT OF PERSPECTUS

ARCHITECTURE. COPYRIGHT C 2019.

13212 Shaker Square Suite 204 Cleveland, Ohio 44120 P. 216.752.1800 F. 216.752.3833

18067

Z M y D o c u m e n ts \1

F F

H C

F R jd u a le .r v t

0-ES1-1

10701 East Blvd. Cleveland, OH 44106

06/26/2020 MPL JRD

541-19-101Renovate Operating RoomsBID ISSUEELECTRONIC SAFETY AND SECURITY LEGEND

& NOTES

Revisions: Date:

Bid Issue 06/26/2020

EXISTING

(18) PAIR BUNDLE OF

MULTI-MODE FIBER AND (6)

PAIR BUNDLE SINGLE-

MODE FIBER NETWORK

DATA RACK TO LENEL

SYSTEM RACK.

BATTERY

P/S

CARD READER

HINGED DOOR TUB

INPUTS RELAY

RELAY (24VDC)

NIC

LINK

ADDITIONAL LENEL SYSTEM ENCLOSURE

(PROVIDE QUANTITY AS REQUIRED)

24VDC POWER SUPPLY

BATTERY

POWER

SUPPLY

BOARD

OUTPUT

ADDITIONAL POWER SUPPLY

(PROVIDE QUANTITY AS REQUIRED)

ACCESS CONTROL SYSTEM RISER CODED NOTES:

EXISTING

EUL

BUILDING

DATA CENTER

EQUIPMENT

SHIELDED TWISTED PAIRS

(3 PAIRS, #22AWG) CAT6A TO

LENEL SYSTEM

SWITCH

20A-120V-1Ø

CRITICAL BRANCH

CIRCUIT

EXISTING

VAMC 3RD

FLOOR

TELEPHONE

EQUIPMENT ROOM

1" CONDUIT

(AS REQUIRED)

TO NEXT

1320 BOARD

NON METALLIC

RACEWAY

EXISTING SERVER

EXISTING

STORAGE ARRAY

EXISTING SERVER

EXISTING 4507

CORE SWITCH

EXISTING

STORAGE ARRAY

EXISTING SERVER

EXISTING

STORAGE ARRAY

APPROXIMATELY 40

CAMERA CAN

CONNECT TO EACH

SERVER

EXISTING 4507

CORE SWITCH

EXISTING (10) PAIRS OF

SINGLEMODE FIBER

DEDICATED TO LENEL

SYSTEM

EX. 72-STRAND FIBER

TERMINATION BOX

POWER AND

DATA LINK

TO PROJECT

AREA DEVICES

(CONDUIT AS

NECESSARY)

LENEL SYSTEM ENCLOSURE

PROVIDE COMPONENTS AS NECESSARY IN A LENEL SYSTEM CABINET TO PROVIDE CONNECTION FOR LOCAL DEVICES IN THE AREAS OUTLINED ON THE COMMUNICATION PLANS.

A. 18"W x 24"H BOX AND HINGED COVER [MAXIMUM (6) 2020 OR 1320 BOARDS PER BOX]

B. 12VDC POWER SUPPLY

C. 7.0 Ah BATTERIES

D. PROVIDE 2-WIRE RS-485 DATA LINK BETWEEN 2020 AND 1320 PANELS.

E. PROVIDE 2-WIRE POWER LINK BETWEEN 2020 AND 1320 PANELS.

F. 2020 MAIN BOARD [(1) 2020 MAIN BOARD IS REQUIRED FOR EVERY (30) 1320 SUB-BOARDS]

1. NIC LINK TO LENEL NETWORK

2. (2) CARD ACCESS READER INPUTS

3. (8) INPUTS

4. (2) DOOR RELEASE RELAYS

5. (4) RELAYS

E. 1320 SUB-BOARD

1. (2) CARD ACCESS READER INPUTS

2. (8) INPUTS

3. (2) DOOR RELEASE RELAYS

4. (4) RELAYS

DOOR HARDWARE POWER SUPPLY

PROVIDE 24VDC POWER SUPPLY IN A SYSTEM CABINET AS NECESSARY TO PROVIDE POWER TO LOCAL DEVICES IN THE AREAS OUTLINED ON THE COMMUNICATION PLANS.

A. 12"W x 16"H BOX AND HINGED COVER

B. (8) FUSED OUTPUTS

C. 6A TOTAL OUTPUT CURRENT

D. 40 Ah BATTERY

LENEL SYSTEM SWITCH

CONTRACTOR SHALL PROVIDE ALL ADDITIONAL COMPONENTS, SOFTWARE, ETC NECESSARY TO EXTEND THE EXISTING LENEL SECURITY SYSTEM AND SATISFY THE GENERAL SCOPE OF THIS

PROJECT WHICH IS TO:

A. MAINTAIN EXISTING SECURITY DEVICES OUTSIDE OF PROJECT AREA. REMOVE EXISTING DEVICES IN THE PROJECT AREA COMPLETE.

B. PROVIDE NEW SECURITY DEVICES IN THE PROJECT AREA AND CONNECT COMPLETE TO NEW LENEL 2020 OR 1320 PANELS.

C. PROVIDE QUANTITY OF PANELS AS REQUIRED TO SUPPORT THE NUMBER OF DEVICES SHOWN ON THE FLOOR PLANS.

D. PROVIDE GROUP OF (64) CARD READER LICENSES FOR THIS PROJECT.

ADDITIONAL CONDUITS ARE NOT SHOWN FOR CLARITY PURPOSES. CONTRACTOR SHALL ROUTE ALL POWER, SECURITY AND DATA WIRING IN APPROPRIATE CONDUITS.

GENERAL SECURITY SYSTEM NOTES:

S1. ALL SECURITY SYSTEM DEVICES SHALL BE CONNECTED COMPLETE TO THE LENEL SYSTEM IN ACCORDANCE

WITH ENGINEER APPROVED MANUFACTURER'S SHOP DRAWING WIRING DIAGRAMS AND DETAILS.

S2. ALL SECURITY SYSTEM CONDUCTORS SHALL BE INSTALL IN 3/4" MINIMUM SIZE CONDUIT STUBBED TO ABOVE FINISHED CEILING. ROUTE SECURITY SYSTEM CONDUCTORS IN J-HOOKS SPACE AT 5'-0" ON CENTER ABOVE

FINISHED CEILING.

S3. REFER TO SPECIFICATIONS SECTIONS IN DIVISION 28 FOR ADDITIONAL REQUIREMENTS.

EXISTING FIBER

PATCH PANELS

EXISTING LENEL

SYSTEM RACK

EXISTING TYPICAL NETWORK

DATA RACK (A1-A6 ON

PLANS)

EX. 72-STRAND FIBER

TERMINATION BOX

EXISTING PAIR 62.5

MULTIMODE

FIBER OPTIC CABLE

EXISTING LENEL

PANELS

WITH 2020 AND 1320

DEVICES. REFER TO

ENLARGED OIT PLANS

EXISTING GREEN

CAT6 CABLE

CAMERAS

(TYPICAL)

NEW GREEN

CAT6A CABLE

EXISTING

TELECOM ROOM 2-C363

EXISTING TELECOM ROOM

FIBER PATCH PANEL

EXISTING LENEL

SWITCH

EXISTING MULTI-MODE

FIBER BUNDLE BETWEEN

OIT ROOM AND MCR WITH (1)

PAIR PATCHED TO EXISTING

LENEL SYSTEM

SECURITY DEVICE NAMING

CONTRACTOR SHALL PROGRAM DEVICES PER VA NAMING STANDARD:

CAMERA: C(1B-100): C = CAMERA, 1 = FLOOR, B= BUILDING SECTION, 100 = ROOM NUMBER

DOOR: D(BB-100): D = DOOR, FIRST B = FLOOR, SECOND B = BUILDING SECTION, 100 = ROOM NUMBER PANIC BUTTONS: P(1C-100) P = PANIC BUTTON, 1 = FLOOR, C = BUILDING SECTION, 100 = ROOM NUMBER

59459

M.P. LONG

O F

G E

ERT

L EA

E I N

F OO

FREDRICK, FREDRICK & HELLER

ENGINEERS, INC.

672 EAST ROYALTON ROAD

BROADVIEW HTS., OHIO 44147

TEL. (440) 546-9696

FAX: (440) 546-9699

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

1DESIGN AND CONSTRUCTION DOCUMENTS AS

INSTRUMENTS OF SERVICE ARE GIVEN IN

CONFIDENCE AND REMAIN THE PROPERTY OF

PERSPECTUS ARCHITECTURE. THE USE OF THIS

DESIGN AND THESE CONSTRUCTION

DOCUMENTS FOR PURPOSES OTHER THAN THE

SPECIFIC PROJECT NAMED HEREIN IS STRICTLY

PROHIBITED WITHOUT THE EXPRESSED

WRITTEN CONSENT OF PERSPECTUS

ARCHITECTURE. COPYRIGHT C 2019.

13212 Shaker Square Suite 204 Cleveland, Ohio 44120 P. 216.752.1800 F. 216.752.3833

18067

Z M y D o c u m e n ts \1

F F

H C

F R jd u a le .r v t

0-ES1-2

10701 East Blvd. Cleveland, OH 44106

06/26/2020 MPL JRD

541-19-101Renovate Operating RoomsBID ISSUEACCESS CONTROL SYSTEM RISER, DIAGRAM, AND NOTES

NOT TO SCALE

ACCESS CONTROL SYSTEM RISER AND DETAILS1

ELECTRIFIED LOCKSET - MOUNTED ON SECURED SIDE OF

THE DOOR. 24VDC. CONTAINS REQUEST-TO-EXIT AND DOOR

POSITION CONTACTS. LOCKSET PROVIDED BY DOOR

HARDWARE VENDOR AND CONNECTED COMPLETE BY

SECURITY CONTRACTOR.

CARD READER - HID RP40H OR EQUAL. MOUNTS IN

2-GANG BOX W/SINGLE GANG RING ON NON-SECURED SIDE OF THE DOOR.

OPERATES ELECTRIC LOCKSET.

48"

6"SQ. x 4"D JUNCTION BOX

WITH SCREW COVER

ABOVE FINISHED CEILING.

COIL AND TAG CABLES

INSIDE BOX FOR FUTURE

EXTENSION.

#22/6 CABLE THROUGH DOOR

WIREWAY- TERMINATE TO LOCKSET

12/24VDC ACCESS CONTROL WIRING TO LENEL SECURITY PANEL.

SINGLE MULTI-CONDUCTOR CABLE ASSEMBLY. ROUTE IN 3/4"C TO

NEAREST CABLE TRAY. CONDUCTORS AS REQUIRED FOR CARD READER,

12/24VDC LOCKSET, REQUEST-TO-EXIT,AND DOOR POSITION CONTACT.

JUNCTION BOX IN DOOR FRAME WITH

HOLES TO RECEIVE CONDUIT. PLUG ANY

UNUSED HOLES. TERMINATE ELECTRIC

HINGE CABLES IN DOOR FRAME JUNCTION

BOX.

6" UON

(3) 22AWG SHIELDED TWISTED PAIRS

ELECTRIC HINGE - 12/24VDC, INCLUDES

REQUEST TO EXIT OUTPUT CONTACTS,

DOOR POSITION SWITCH AND 4'-0" CABLE.

FAIL SECURE OPERATING MODE.

FURNISHED AND CONNECTED BY

CONTRACTOR.

#18/6 CABLE

All items,except the card readers, are to be mounted on the secure side of the door unless otherwise noted.

CEILING

FLOORFLOOR

CEILING

6"SQ. x 4"D JUNCTION BOX

WITH SCREW COVER

ABOVE FINISHED CEILING.

COIL AND TAG CABLES

INSIDE BOX FOR FUTURE

EXTENSION.

RELAY

(OUT SWING) (OUT SWING)

ALL ITEMS, UNLESS OTHERWISE

NOTED, ARE TO BE MOUNTED ON

THE SECURE SIDE OF THE DOOR.

12/24VDC ACCESS CONTROL WIRING TO ACCESS CONTROL PANEL.

SINGLE MULTI-CONDUCTOR CABLE ASSEMBLY. ROUTE IN 3/4"C TO NEAREST CABLE TRAY.

CONDUCTORS AS REQUIRED FOR CARD READER, 12/24VDC LOCKSET, REQUEST-TO-EXIT,

AND DOOR POSITION CONTACT.

ELECTRIC POWER TRANSFER HINGE -

INCLUDES DOOR POSITION SWITCH AND 4'-0"

CABLE. FAIL SECURE OPERATING MODE.

FURNISHED AND CONNECTED BY

CONTRACTOR.

JUNCTION BOX IN DOOR FRAME WITH

HOLES TO RECEIVE CONDUIT. PLUG

ANY UNUSED HOLES. TERMINATE

ELECTRIC HINGE CABLES IN DOOR

FRAME JUNCTION BOX.

(INACTIVE LEAF)

#18/6 CABLE THROUGH

DOOR WIREWAY -

TERMINATE TO

LOCKSET

ELECTRIFIED LOCKSET - 24VDC. CONTAINS

REQUEST-TO-EXIT AND DOOR POSITION

CONTACTS. LOCKSET PROVIDED BY DOOR

HARDWARE VENDOR AND CONNECTED

COMPLETE BY SECURITY CONTRACTOR.

48"

CARD READER - HID RP40H OR EQUAL.

MOUNTS IN 2-GANG BOX W/SINGLE GANG

RING ON NON-SECURED SIDE OF THE

DOOR.

OPERATES ELECTRIC LOCKSET.

AUTODOOR

3#22 STP

120V FOR AUTODOOR OPERATOR - 2#12 AND 1#12EG

AUTODOOR

POWER

SUPPLY

(2) #22 SHIELDED

TWISTED PAIRS

(PER PUSH PLATE

REQUEST-TO-EXIT

MOTION DETECTOR

2#18 SHIELDED

TWISTED PAIR

3#22 SHIELDED

TWISTED PAIR

FLOOR

CEILING

6"SQ. x 4"D JUNCTION BOX WITH SCREW COVER

ABOVE FINISHED CEILING. COIL AND TAG CABLES

INSIDE BOX FOR FUTURE EXTENSION.

RELAY

48"

(OUT SWING) (IN SWING)

CARD READER - HID RP40H OR

EQUAL. MOUNTS IN

2-GANG BOX W/SINGLE GANG

RING ON NON-SECURED SIDE OF

THE DOOR. OPERATES MAGNETIC

LOCKS.

ALL ITEMS, UNLESS OTHERWISE

NOTED, ARE TO BE MOUNTED ON

THE SECURE SIDE OF THE DOOR.

ELECTRIC POWER TRANSFER HINGE - INCLUDES

DOOR POSITION SWITCH AND 4'-0" CABLE. FAIL

SECURE OPERATING MODE. FURNISHED AND

CONNECTED BY CONTRACTOR.

JUNCTION BOX IN DOOR FRAME WITH HOLES

TO RECEIVE CONDUIT. PLUG ANY UNUSED

HOLES. TERMINATE ELECTRIC HINGE CABLES

IN DOOR FRAME JUNCTION BOX.

(3) #22 SHIELDED

TWISTED PAIRS

MOTION DETECTOR

2#18 SHIELDED

TWISTED PAIR

MAGNETIC LOCKS

AUTODOOR

3#22 STP

120V FOR AUTODOOR OPERATOR - 2#12 AND 1#12EG

AUTODOOR

POWER

SUPPLY

12/24VDC ACCESS CONTROL WIRING TO REMOTE DOOR RELEASE PANEL.

ROUTE IN 3/4"C TO NEAREST CABLE TRAY.

(2) #22 AND (4) #18 SHIELDED TWISTED PAIRS

(2) #22 SHIELDED TWISTED

PAIRS(PER PUSH PLATE)

12/24VDC ACCESS CONTROL WIRING TO ACCESS CONTROL PANEL.

SINGLE MULTI-CONDUCTOR CABLE ASSEMBLY. ROUTE IN 3/4"C TO NEAREST CABLE TRAY.

CONDUCTORS AS REQUIRED FOR CARD READER, 12/24VDC LOCKSET, REQUEST-TO-EXIT,

AND DOOR POSITION CONTACT.

CEILING

FLOOR

KEYPAD PROXIMITY READER - HID #RP40 OR

EQUAL. MOUNTS IN 2-GANG BOX W/SINGLE

GANG RING. OPERATES ELECTRIC STRIKE

48"

6"SQ. x 4"D JUNCTION BOX

WITH SCREW COVER

ABOVE FINISHED CEILING.

COIL AND TAG CABLES

INSIDE BOX FOR FUTURE

EXTENSION.

12/24VDC ACCESS CONTROL WIRING TO LENEL SECURITY PANEL.

VIA SINGLE MULTI-CONDUCTOR CABLE ASSEMBLY

(3) #22 SHIELDED TWISTED PAIRS FOR CARD READER

(2) #18 SHIELDED TWISTED PAIRS FOR 12/24VDC LOCKSET

(2) #18 SHIELDED TWISTED PAIRS FOR REQUEST-TO-EXIT

(2) #18 SHIELDED TWISTED PAIRS FOR DOOR POSITION CONTACTS

(2) #18 SHIELDED TWISTED PAIRS FOR SPARE

6" UON

(3) 22AWG SHIELDED TWISTED PAIRS

All items,except the card readers, are to be mounted on the secure side of the door.

CEILING

FLOOR

REQUEST-TO-EXIT

MOTION SENSOR

ELECTRIC STRIKE - 24VDC. MOUNTED IN INACTIVE DOOR

LEAF. PROVIDE BY DOOR HARDWARE VENDOR AND

CONNECTED COMPLETE BY SECURITY CONTRACTOR.

PROVIDE JUNCTION BOX IN DOOR FRAME WITH HOLES TO

RECEIVE CONDUIT. PLUG ANY UNUSED HOLES. TERMINATE

ELECTRIC HINGE CABLES IN DOOR FRAME JUNCTION BOX.

DOOR

CONTACTS

59459

M.P. LONG

O F

G E

ERT

L EA

E I N

F OO

FREDRICK, FREDRICK & HELLER

ENGINEERS, INC.

672 EAST ROYALTON ROAD

BROADVIEW HTS., OHIO 44147

TEL. (440) 546-9696

FAX: (440) 546-9699

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

1DESIGN AND CONSTRUCTION DOCUMENTS AS

INSTRUMENTS OF SERVICE ARE GIVEN IN

CONFIDENCE AND REMAIN THE PROPERTY OF

PERSPECTUS ARCHITECTURE. THE USE OF THIS

DESIGN AND THESE CONSTRUCTION

DOCUMENTS FOR PURPOSES OTHER THAN THE

SPECIFIC PROJECT NAMED HEREIN IS STRICTLY

PROHIBITED WITHOUT THE EXPRESSED

WRITTEN CONSENT OF PERSPECTUS

ARCHITECTURE. COPYRIGHT C 2019.

13212 Shaker Square Suite 204 Cleveland, Ohio 44120 P. 216.752.1800 F. 216.752.3833

18067

Z M y D o c u m e n ts \1

F F

H C

F R jd u a le .r v t

0-ES1-3

10701 East Blvd. Cleveland, OH 44106

06/26/2020 MPL JRD

541-19-101Renovate Operating RoomsBID ISSUEACCESS CONTROLLED DOOR DETAILS AND

NOTES

NOT TO SCALE

ACCESS CONTROLLED DOOR TYPE 1 1NOT TO SCALE

ACCESS CONTROLLED DOOR TYPE 2 2

NOT TO SCALE

ACCESS CONTROLLED DOOR TYPE 3 3

ACCESS CONTROL DOOR GENERAL NOTES

1 VERIFY ACCESS CONTROLLED DOOR REQUIREMENTS AND EXACT CABLING REQUIREMENTS WITH SECURITY SYSTEM AND DOOR HARDWARE VENDOR PRIOR TO ROUGH-IN. CABLING INDICATED IS FOR REFERENCE ONLY. CONTRACTOR SHALL PROVIDE SINGLE, PLENUM-RATED COMPOSITE CABLE DESIGNED FOR ACCESS CONTROL SYSTEMS FROM ACCESS CONTROL PANEL TO DOOR LOCATION AND ROUTE CABLING TO INDIVIDUAL DEVICES AS REQUIRED. DO NOT PROVIDE SEPARATE ACCESS CONTROL CABLING FOR EACH DEVICE FROM CONTROL PANEL TO DOOR LOCATIONS.

2 CONTRACTOR IS RESPONSIBLE FOR ALL ROUGH-INS, DEVICES, AND CABLING NECESSARY FOR A COMPLETE

INSTALLATION. COORDINATE REQUIREMENTS FOR ALL DOORS WITH DOOR HARDWARE VENDOR.

3 CONTRACTOR SHALL REFER TO ARCHITECTURAL PLANS AND DOOR HARDWARE SCHEDULE FOR EXACT QUANTITY AND LOCATION OF ACCESS CONTROL DEVICES. CONTACT ENGINEER SHOULD A DISCREPANCY ARISE BETWEEN

ACCESS CONTROL DETAILS AND ARCHITECTURAL DRAWINGS.

4 ACCESS CONTROLLED DOORS MAY OCCUR IN CURTAIN WALL SYSTEMS. PROVIDE POST MOUNTED PUSH BUTTONS/CARD READERS WHERE NECESSARY. COORDINATE EXACT REQUIREMENTS WITH DOOR HARDWARE

VENDOR.

5 ALL ACCESS CONTROL CABLING SHALL BE INSTALLED IN 3/4" MINIMUM CONDUIT. WHERE 3/4" CONDUIT IS NOT FEASIBLE, CONTRACTOR SHALL RECEIVE WRITTEN APPROVAL FROM FACILITY PROJECT MANAGER TO PROVIDE 1/2"C OR SMALLER. ACCESS CONTROL CABLING SHALL BE ROUTED IN CONDUIT TO NEAREST CABLE TRAY AND IS

PERMITTED TO BE RUN IN CABLE TRAY BACK TO ACCESS CONTROL PANEL.

6 PROVIDE FACILITY STANDARD LABELING ON ALL ACCESS CONTROL CABLING (ROOM NAME, DEVICE AND DOOR NUMBER). LABEL RELAYS ON ACCESS CONTROL SYSTEM BOARDS WITH DEVICE BEING SERVED AND ROOM NUMBER.

7 PROJECT MANAGER SHALL WITNESS COMPLETE FUNCTIONALITY TESTING OF ACCESS CONTROL, VIDEO SURVEILLANCE, AND PANIC ALARM SYSTEMS PRIOR TO FINAL ACCEPTANCE. TESTING SHALL INCLUDE REPRESENTATIVE FROM FACILITY SECURITY. COORDINATE SCHEDULE OF TESTING WITH PROJECT MANAGER.

8 REFER TO ARCHITECTURAL PLANS FOR QUANTITY AND LOCATION OF AUTODOOR PUSH PLATES.

NOT TO SCALE

ACCESS CONTROLLED DOOR TYPE 4 4

F FF

TS WF

C R

16C 17B 18E 20A 24C 25B 26B 28B25C

27o 32

17a 24b 25a 26a 28 3119c 23b

XRR

TYP

PHASE 2 SCOPE OF WORK

TYP

X X

XRR

X X

Patient Room #3 (Isolation)

2D127B

Anteroom

2D127A

EMS

Closet

2D110

Gas Room Non

Oxidizing

2514A

Laser Scales Video

Equipment

Toilet

2D127C

Patient Room #5

2D112

Patient Room #4

2D111

Patient Room #2

2D126

Lounge / Dictation

2D251

CRNA

2D253

Corridor

2D250

Women Lockers

2D257A

Surgery Waiting

2D270

Work

2D260D

Work

2D260E

Work

2D260F

Holding

2D260

Holding

Corridor

2500B

Implant Storage

Anesthesia Work Room

Corridor

2500H

OR-7

General

OR-6

General

Electric

EMS

Anesthesia Storage

EMS

2508A

Sub Sterile

Dictation

Sterile Storage

General

OR-5

General

OR-4

Storage

OR-3

Orthopedic

Elec.

2517A

Sub Sterile

Storage

OR-1

Cardiac

Pump Room

Gas Room Oxidizing

TEMP.

Implant Storage

Rm.

Stair

2S7

Office

Special Equipment Records

OR-2

Neuro

Bed/ Treatment

Room

Medication Prep

Room

Workroom

Corridor

2C100E

Corridor

2500A

Pharmacy

Unisex RR

Corridor

2500J

Corridor

2C280

Foyer

2D255E

Alcove

2D251A

Soiled Utility

2D254

Sterile Supply

2D254A

Locker Room

2D252

Dictation

2D252A

Office

Corridor

2C280

Light Room

2500I

TEMP.

Medical

Prep Rm.

Soiled Elevator

Clean Elevator

Scrub

2500N Scrub

2500O

Upper Mechanical

Room

2500Q

Procedure

2C231 Procedure

2C232

Staff Women

2B213

Staff Men

2B212

Procedure

2C233

Sub-Sterile

2C235

Passage

2C230

PACU EMS

2C234 Stair #9

2C202

PACU

Cubicle 5

2C237E

PACU

Cubicle 6

2C237F

PACU

Cubicle 4

2C237D

PACU

Cubicle 3

2C237C

PACU

Cubicle 2

2C237B

PACU

Cubicle 1

2C237A

Electrical Rm.

2519A

OI&T

Office

2D261B

Office

2D261A

Office

2D261C

Control

2D261

Nurse Mgr.

2D262

59459

M.P. LONG

O F

G E

ERT

L EA

E I N

F OO

FREDRICK, FREDRICK & HELLER

ENGINEERS, INC.

672 EAST ROYALTON ROAD

BROADVIEW HTS., OHIO 44147

TEL. (440) 546-9696

FAX: (440) 546-9699

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

1DESIGN AND CONSTRUCTION DOCUMENTS AS

INSTRUMENTS OF SERVICE ARE GIVEN IN

CONFIDENCE AND REMAIN THE PROPERTY OF

PERSPECTUS ARCHITECTURE. THE USE OF THIS

DESIGN AND THESE CONSTRUCTION

DOCUMENTS FOR PURPOSES OTHER THAN THE

SPECIFIC PROJECT NAMED HEREIN IS STRICTLY

PROHIBITED WITHOUT THE EXPRESSED

WRITTEN CONSENT OF PERSPECTUS

ARCHITECTURE. COPYRIGHT C 2019.

13212 Shaker Square Suite 204 Cleveland, Ohio 44120 P. 216.752.1800 F. 216.752.3833

18067

Z M y D o c u m e n ts \1

F F

H C

F R jd u a le .r v t

2-ES2-1

10701 East Blvd. Cleveland, OH 44106

06/26/2020 MPL JRD

541-19-101Renovate Operating RoomsBID ISSUEPARTIAL SECOND FLOOR F.A. & SECURITY

DEMO PLAN - PHASE 2

ELECTRICAL DEMOLITION NOTES

D1 ALL EXISTING LIGHTING FIXTURES, RECEPTACLES, SPECIAL SYSTEMS OUTLETS, CONDUIT, WIRING ETC. THAT WILL NOT BE REUSED IN THE REMODELED INSTALLATION SHALL BE REMOVED UNLESS OTHERWISE NOTED. THIS DEMOLITION SHALL INCLUDE ALL ELECTRICAL ITEMS SHOWN ON THIS PLAN THAT ARE NOT DESIGNATED BY "X", "XN" OR "XRR" AND ALL OTHER ADDITIONAL ITEMS THAT ARE NOT SHOWN BUT THAT MUST BE REMOVED IN ORDER TO

PRODUCE A NEAT, FINISHED, PROPERLY FUNCTIONING ELECTRICAL INSTALLATION. MAINTAIN CIRCUIT CONTINUITY TO ALL EXISTING REUSED ELECTRICAL SYSTEMS COMPONENTS - PROVIDE ALL CONDUIT AND WIRING NECESSARY TO ACHIEVE THE SAME. THE CONTRACTOR SHALL FIELD VERIFY THE NATURE AND EXTENT OF ALL DEMOLITION

WORK AND SHALL INCLUDE COST FOR THE SAME IN THE BID SUBMITTAL.

D2 ALL EXISTING REMOVED ELECTRICAL EQUIPMENT, DEVICES, ETC. THAT ARE NOT RETAINED BY THE OWNER SHALL

BE DISPOSED OF BY THE ELECTRICAL CONTRACTOR.

D3 DASHED WALLS ON PLAN INDICATE EXISTING CONSTRUCTION TO BE REMOVED.

D4 REFER TO ELECTRICAL LEGEND FOR ALL SYMBOL DESIGNATIONS. NOTE SPECIAL ATTENTION TO SELECTED EXISTING DEVICES, WIREWAYS, ETC. MARKED XB, XRR OR XN, AND REMOVE/BLANK OFF, RELOCATE OR REPLACE

THESE COMPONENTS AS REQUIRED.

D5 MAINTAIN CIRCUIT CONTINUITY TO ALL EXISTING ELECTRICAL SYSTEM COMPONENTS IN AREAS NOT BEING REMODELED UNLESS OTHERWISE NOTED. PROVIDE ALL CONDUIT AND WIRING EXTENSIONS NECESSARY TO

ACHIEVE SAME.

D6 THE ELECTRICAL CONTRACTOR SHALL CLOSELY COORDINATE ALL ELECTRICAL DEMOLITION WORK WITH THE GENERAL AND MECHANICAL CONTRACTORS, AND SHALL DISCONNECT ALL REQUIRED CIRCUITS IN A TIMELY

MANNER.

D7 REFER TO ARCHITECTURAL PLANS FOR SPECIFIC PHASING REQUIREMENTS.

# CODED NOTES

1 REFER TO DRAWING 2-E5-1 "PARTIAL SECOND FLOOR SUBPHASES A,B - PHASE 2" FOR DETAILED

PHASING REQUIREMENTS.

REMOVE ALL FIRE ALARM, SECURITY DEVICES, JUNCTION BOXES, AND ETC. FROM PHASE 2 ARE

UNLESS OTHERWISE NOTED. REMOVE ALL ASSOCIATED CONDUIT AND WIRING COMPLETE TO

SOURCE. MAINTAIN OPEATION OF DEVICES OUTSIDE OF PHASE 2 AREA.

0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'

1/8" = 1'-0"

PARTIAL SECOND FLOOR FIRE ALARM AND

SECURITY DEMOLITION PLAN - PHASE 2 1

PHASING GENERAL NOTES:

ALL WORK IN PHASE 2 SHALL BE DONE DURING OFF-HOURS. REFER TO THE GENERAL REQUIREMENTS FOR

ADDITIONAL INFORMATION.

A-front

B -rig h t

C-back

D -le ft

A-front

B -rig h t

C-back

D -le ft

A-front B -ri gh t

C-backD -le ft

A-front

B -rig h t

C-back

D -le ft

A-front

B -rig h t

C-back

D -le ft

A-front

B -rig h t

C-back

D -le ft

A-front

B -rig h t

C-back

D -le ft

A-front B -ri gh t

C-backD -le ft

A -f ro n t

B-right

C -b a ck

D-left

A -front

B-rig ht

C -b ack

D-left

16C 17B 18E 20A 24C 25B 26B 28B25C

17a 24b 25a 26a 28 3119c 23b

SCP

FACP

X X

PHASE 2 SCOPE OF WORK

Electrical Room-1

2C213-1

Scrub-1

2C200D-1

Ortho Equipment-1

2C215A-1

Ortho OR

(OR-08)-1

2C215-1

General

(OR-09)-1

2C216-1

Semi-Restricted

2C200A

Semi-Restricted

2C200F

General

(OR-07)

2C212

Bed Holding

2C200E

Bed Holding

2C200H

Scrub

2C200G

Scrub

2C200J

Bed Holding

2C200K

Scrub

2C200L

Bed Holding

2C200M

Anesthesia Workroom

2C218

Office

2D285

Office

2D284

Cart Holding

2C219

X X

2-T2-3

Soiled Holding

2D281

Anesthesia Office

2D282

Anesthesia Storage

2C222

Medication Prep

Room

2C219A

Alcove

2C220R

Alcove

2C200Q

Office

2C283

Control Room

2D-261

Laboratory, Frozen Section

2C214

TYP3

TYP

Patient Room #3 (Isolation)

2D127B

Anteroom

2D127A

EMS

Closet

2D110

Gas Room Non

Oxidizing

2514A

Laser Scales Video

Equipment

Toilet

2D127C

Toilet

2D263

Patient Room #4

2D111

Lounge / Dictation

2D251

Work

2D260D

Work

2D260E

Work

2D260F

Office

2D261C

Sub Sterile

General

OR-4

Storage

OR-3

Orthopedic

Elec.

2517A

Sub Sterile

Storage

OR-1

Cardiac

Pump Room

Gas Room Oxidizing

TEMP.

Implant Storage

Rm.

Stair

2S7

Office

Special Equipment Records

OR-2

Neuro

Corridor

2C100E

Foyer

2D255E

Dictation

2D252A

Office

Corridor

2C280

Light Room

2500I

TEMP.

Medical

Prep Rm.

Clean Elevator

Scrub

2500N

Scrub

2500O

Upper Mechanical

Room

2500Q

Procedure

2C233

Procedure

2C232 Procedure

2C231

Passage

2C230

Sub-Sterile

2C235

HAC

2C224

PACU EMS

2C234 Stair #9

2C202

PACU

Cubicle 1

2C237A

PACU

Cubicle 2

2C237B

PACU

Cubicle 3

2C237C

PACU

Cubicle 4

2C237D

PACU

Cubicle 5

2C237E

PACU

Cubicle 6

2C237F Nurse Mgr.

2D262

Surgery Waiting

2D270

CRNA

2D253

OI&T

Electrical Rm.

2519A

59459

M.P. LONG

O F

G E

ERT

L EA

E I N

F OO

FREDRICK, FREDRICK & HELLER

ENGINEERS, INC.

672 EAST ROYALTON ROAD

BROADVIEW HTS., OHIO 44147

TEL. (440) 546-9696

FAX: (440) 546-9699

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

1DESIGN AND CONSTRUCTION DOCUMENTS AS

INSTRUMENTS OF SERVICE ARE GIVEN IN

CONFIDENCE AND REMAIN THE PROPERTY OF

PERSPECTUS ARCHITECTURE. THE USE OF THIS

DESIGN AND THESE CONSTRUCTION

DOCUMENTS FOR PURPOSES OTHER THAN THE

SPECIFIC PROJECT NAMED HEREIN IS STRICTLY

PROHIBITED WITHOUT THE EXPRESSED

WRITTEN CONSENT OF PERSPECTUS

ARCHITECTURE. COPYRIGHT C 2019.

13212 Shaker Square Suite 204 Cleveland, Ohio 44120 P. 216.752.1800 F. 216.752.3833

18067

Z M y D o c u m e n ts \1

F F

H C

F R jd u a le .r v t

2-ES2-2

10701 East Blvd. Cleveland, OH 44106

06/26/2020 MPL JRD

541-19-101Renovate Operating RoomsBID ISSUEPARTIAL SECOND FLOOR F.A. & SECURITY

PLAN - PHASE 2

# CODED NOTES

1 WORK IN OUTLINED AREA (PHASES 2A AND 2B) SHALL BE DONE DURING OFF HOURS. REFER TO

ARCHITECTURAL DRAWINGS FOR EXACT PHASING REQUIREMENTS.

CONNECT ALL NEW FIRE ALARM DEVICES TO EXISTING FIRE ALARM TERMINAL CABINET IN

TELECOM ROOM 2-C363.

CONNECT ALL NEW SECURITY DEVICES AND SECURITY CAMERA TO EXISTING LENEL CONTROL

PANEL IN TELECOM ROOM 2-C363. REFER TO DRAWING 0-ES1-2 AND 0-ES1-3 FOR ADDITIONAL

INFORMATION.

FIRE ALARM GENERAL NOTES

F1 ALL FIRE ALARM SYSTEM DEVICES SHALL BE CONNECTED COMPLETE TO THE MAIN FIRE ALARM SYSTEM CONTROL

PANEL IN ACCORDANCE WITH ENGINEER APPROVED MANUFACTURER'S SHOP DRAWING WIRING DIAGRAMS AND

DETAILS.

F2 ALL FIRE ALARM SYSTEM CONDUCTORS SHALL BE INSTALLED IN 3/4" MINIMUM SIZE CONDUIT SYSTEM.

F3 IN GENERAL ALL MANUAL PULL STATIONS SHALL BE INSTALLED AT 48" ABOVE FINISHED FLOOR. MANUAL PULL STATIONS SHALL BE INSTALLED WITHIN 5'-0" OF ALL EXIT DOORWAY OPENINGS AT EACH EXIT ON EACH FLOOR.

ADDITIONAL MANUAL PULL STATIONS SHALL BE PROVIDED SO THAT THE TRAVEL DISTANCE TO THE NEAREST PULL

STATION WILL NOT EXCEED 200' MEASURED HORIZONTALLY ON THE SAME FLOOR.

F4 ALL AUDIO/VISUAL AND VISUAL ONLY FIRE ALARM SYSTEM DEVICES SHALL BE ADA TYPE. IN ALL CASES VISUAL DEVICES SHALL BE WALL MOUNTED AT 80" ABOVE FINISHED FLOOR. VISUAL DEVICES SHALL BE LOCATED NOT MORE THAN 15' FROM THE END OF ALL CORRIDORS WITH A SEPARATION NOT GREATER THAN 100' BETWEEN DEVICES. AUDIO DEVICES SHALL BE INSTALLED THROUGHOUT THE BUILDING TO ATTAIN MINIMUM DECIBEL LEVELS REQUIRED BY CODE. COMBINATION AUDIO/VISUAL DEVICES AND ADDITIONAL VISUAL ONLY DEVICES SHALL BE

INSTALLED AT LOCATIONS AS INDICATED ON FLOOR PLANS.

F5 IN GENERAL SMOKE DETECTORS SHALL BE INSTALLED ON CEILINGS WITH SPACING NOT TO EXCEED

MANUFACTURER'S RECOMMENDATION.

F6 SPRINKLER SYSTEM WATERFLOW ALARM INITIATING DEVICES SHALL BE CONNECTED COMPLETE TO THE FIRE

ALARM SYSTEM.

F7 DUCT TYPE SMOKE DETECTORS SHALL BE PROVIDED FOR ALL HVAC RETURN AIR SYSTEMS WITH DESIGN CAPACITY GREATER THAN 2,000 CFM. WHERE RETURN AIR RISERS SERVE TWO OR MORE STORIES, AND ARE PART OF A RETURN AIR SYSTEM HAVING A DESIGN CAPACITY GREATER THAN 15,000 CFM, DUCT DETECTORS SHALL BE PROVIDED AT EACH STORY. COORDINATE EXACT DETECTOR LOCATIONS AND PROVISION OF ADEQUATE DUCT

LENGTHS WITH THE MECHANICAL CONTRACTOR PRIOR TO ROUGH-IN.

F8 PROVIDE ALL FIRE ALARM SYSTEM COMPONENTS NECESSARY FOR SHUT DOWN OF HVAC EQUIPMENT BY THE FIRE

ALARM SYSTEM WHERE SAME IS REQUIRED.

F9 PROVIDE ALL FIRE ALARM SYSTEM COMPONENTS NECESSARY FOR ELEVATOR CAPTURE BY THE FIRE ALARM

SYSTEM WHERE SAME IS REQUIRED.

F10 SMOKE DETECTORS SHALL BE INSTALLED WITHIN 5'-0" OF CENTERLINE OF SMOKE DOORS ON HOLD-OPEN.

F11 SMOKE DETECTORS SHALL NOT BE LOCATED CLOSER THAN 3'-0" FROM AN AIR SUPPLY DIFFUSER.

F12 AUTOMATIC DOORS LOCATED ON A 2-HOUR FIRE RATED WALL SHALL HAVE A FIRE ALARM INTERFACE THAT INTERRUPTS 120V POWER FOR THE AUTOMATIC DOOR OPENER UNDER A FIRE ALARM CONDITION. PROVIDE (1) CONTROL MODULE FROM EACH BUILDING FIRE ALARM SYSTEM IF LOCATED ALONG THE BORDER OF TWO

BUILDINGS.

0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'

1/8" = 1'-0"

PARTIAL SECOND FLOOR FIRE ALARM AND

SECURITY PLAN - PHASE 2 1

PHASING GENERAL NOTES:

ALL WORK IN PHASE 2 SHALL BE DONE DURING OFF-HOURS. REFER TO THE GENERAL REQUIREMENTS FOR

ADDITIONAL INFORMATION.

16C 17B 18E 20A 24C 25B 26B 28B25C

17a 24b 25a 26a 28 3119c 23b

PHASE 3 SCOPE OF WORK

X X

X X X

X X

X X X

X X

Cart Holding

2C219

XRR

TYP

General

(OR-07)

2C212

Ortho OR

(OR-08)

2C215

Clean Corridor

2C200S

Clean Corridor

2C200P

Soiled Holding

2D281

Anesthesia Office

2D282

Anesthesia Storage

2C222

Medication Prep

Room

2C219A

Ortho OR

(OR-10)

2C217

General

(OR-09)

2C216

Anesthesia Workroom

2C218 Office

2D283

Office

2D284

Office

2D285

Semi-Restricted

2C200F

Scrub

2C200GBed Holding

2C200H

Scrub

2C200J Bed

Holding

2C200K

Scrub

2C200L

Bed Holding

2C200M

Electrical Room

2C213

Ortho Equipment

2C215A

Laboratory, Frozen Section

2C214

X X

Patient Room #3 (Isolation)

2D127B

Anteroom

2D127A

EMS

Closet

2D110

Gas Room Non

Oxidizing

2514A

Laser Scales Video

Equipment

Toilet

2D127C

Toilet

2D263

Patient Room #4

2D111

Lounge / Dictation

2D251

Work

2D260E

Work

2D260F

Office

2D261C

Sub Sterile

General

OR-4

Storage

OR-3

Orthopedic

Elec.

2517A

Sub Sterile

Storage

OR-1

Cardiac

Pump Room

Gas Room Oxidizing

TEMP.

Implant Storage

Rm.

Stair

2S7

Office

Special Equipment Records

OR-2

Neuro

Corridor

2C100E

Dictation

2D252A

Office

Corridor

2C280

Light Room

2500I

TEMP.

Medical

Prep Rm.

Scrub

2500N Scrub

2500O

Upper Mechanical

Room

2500Q

Hybrid OR

2C366

Hybrid OR

2C366

Control

2D261

Nurse Mgr.

2D262

Stair #9

2C202

PACU EMS

2C234

Sub-Sterile

2C235

Procedure

2C231

Procedure

2C232

Procedure

2C233

Passage

2C230

PACU

Cubicle 5

2C237E

PACU

Cubicle 6

2C237F

PACU

Cubicle 4

2C237D

PACU

Cubicle 3

2C237C

PACU

Cubicle 2

2C237B

PACU

Cubicle 1

2C237A

CRNA

2D253

OI&T

Electrical Rm.

2519A

59459

M.P. LONG

O F

G E

ERT

L EA

E I N

F OO

FREDRICK, FREDRICK & HELLER

ENGINEERS, INC.

672 EAST ROYALTON ROAD

BROADVIEW HTS., OHIO 44147

TEL. (440) 546-9696

FAX: (440) 546-9699

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

1DESIGN AND CONSTRUCTION DOCUMENTS AS

INSTRUMENTS OF SERVICE ARE GIVEN IN

CONFIDENCE AND REMAIN THE PROPERTY OF

PERSPECTUS ARCHITECTURE. THE USE OF THIS

DESIGN AND THESE CONSTRUCTION

DOCUMENTS FOR PURPOSES OTHER THAN THE

SPECIFIC PROJECT NAMED HEREIN IS STRICTLY

PROHIBITED WITHOUT THE EXPRESSED

WRITTEN CONSENT OF PERSPECTUS

13212 Shaker Square Suite 204 Cleveland, Ohio 44120 P. 216.752.1800 F. 216.752.3833

18067

Z M y D o c u m e n ts \1

F F

H C

F R jd u a le .r v t

3-ES2-1

10701 East Blvd. Cleveland, OH 44106

06/26/2020 MPL JRD

541-19-101Renovate Operating RoomsBID ISSUEPARTIAL SECOND FLOOR F.A. AND SECURITY

DEMO PLAN - PHASE 3

ELECTRICAL DEMOLITION NOTES

WORK AND SHALL INCLUDE COST FOR THE SAME IN THE BID SUBMITTAL.

D2 ALL EXISTING REMOVED ELECTRICAL EQUIPMENT, DEVICES, ETC. THAT ARE NOT RETAINED BY THE OWNER SHALL

BE DISPOSED OF BY THE ELECTRICAL CONTRACTOR.

D3 DASHED WALLS ON PLAN INDICATE EXISTING CONSTRUCTION TO BE REMOVED.

D4 REFER TO ELECTRICAL LEGEND FOR ALL SYMBOL DESIGNATIONS. NOTE SPECIAL ATTENTION TO SELECTED EXISTING DEVICES, WIREWAYS, ETC. MARKED XB, XRR OR XN, AND REMOVE/BLANK OFF, RELOCATE OR REPLACE

THESE COMPONENTS AS REQUIRED.

D5 MAINTAIN CIRCUIT CONTINUITY TO ALL EXISTING ELECTRICAL SYSTEM COMPONENTS IN AREAS NOT BEING REMODELED UNLESS OTHERWISE NOTED. PROVIDE ALL CONDUIT AND WIRING EXTENSIONS NECESSARY TO

ACHIEVE SAME.

D6 THE ELECTRICAL CONTRACTOR SHALL CLOSELY COORDINATE ALL ELECTRICAL DEMOLITION WORK WITH THE GENERAL AND MECHANICAL CONTRACTORS, AND SHALL DISCONNECT ALL REQUIRED CIRCUITS IN A TIMELY

MANNER.

D7 REFER TO ARCHITECTURAL PLANS FOR SPECIFIC PHASING REQUIREMENTS.

0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'

1/8" = 1'-0"

PARTIAL SECOND FLOOR FIRE ALARM AND

SECURITY DEMOLITION PLAN - PHASE 3 1

# CODED NOTES

1 REMOVE ALL FIRE ALARM, SECURITY DEVICES, JUNCTION BOXES, AND ETC. FROM PHASE 2 ARE UNLESS

OTHERWISE NOTED. REMOVE ALL ASSOCIATED CONDUIT AND WIRING COMPLETE TO SOURCE.

PHASING GENERAL NOTES:

ALL WORK IN PHASE 3 SHALL BE DONE DURING OFF-HOURS. REFER TO THE GENERAL REQUIREMENTS FOR

ADDITIONAL INFORMATION.

REFER TO ARCHITECTURAL DRAWINGS FOR SUB PHASES IN PHASE 3.

P F

F P

16C 17B 18E 20A 24C 25B 26B 28B25C

17a 24b 25a 26a 28 3119c 23b

PHASE 3 SCOPE OF WORK

X X

X X X

HL21

T-LL21

LL21EGB

HL22CR2

HL22CR1

LL22CR2

X X

SCP

FACP

X X

Soiled Holding

2D281 Cart

Holding

2C219

Medication Prep

Room

2C219A

Anesthesia Storage

2C222

Anesthesia Office

2D282

Implant

2D253

Dictation

2D251B

Anesthesia Workroom

2C218

Office

2D283

Office

2D284

Office

2D285

Alcove

2C200Q

Alcove

2C200R

Clean Corridor

2C200P

Clean Corridor

2C200S

General

(OR-07)

2C212

Bed Holding

2C200C

Scrub

2C200B

General

OR (OR-6)

2C210

Robotic

OR (OR-5)

2C114

Bed Holding

2C100C

Scrub

2C100D

OI&T

2C122 Electrical

Room

2C115

Clean Corridor

2C100H

Cardiac

OR (OR-2)

2C126

Bed Holding

2C100PScrub

2C100Q

Scrub

2C100U

EMS

Closet

2D280

Alcove

2C100N

Cardiac

OR (OR-1)

2C129

Alcove

2C100M

Ortho OR

(OR-10)

2C217

General

(OR-09)

2C216

Ortho OR

(OR-08)

2C215

Laboratory, Frozen Section

2C214

Ortho Equipment

2C215A

Electrical Room

2C213

Bed Holding

2C200H

Scrub

2C200G Scrub

2C200J Bed

Holding

2C200K

Scrub

2C200L Bed

Holding

2C200M

Semi-Restricted

2C200F

Procedure

2C231

Procedure

2C232

Passage

2C230

Sub-Sterile

2C235

Procedure

2C233

HAC

2C224

PACU EMS

2C234

PACU

Cubicle 1

2C237A

PACU

Cubicle 2

2C237B

PACU

Cubicle 3

2C237C

PACU

Cubicle 4

2C237D

Cardiac Equipment

2C127

Cardiac Pump Room

2C128

Alcove

2C100K

Clean Corridor

2C100J

Immediate Use

Sterilization Room

2C123

Robotic Equipment

Storage

2C213

Equipment Storage

2C112

Anesthesia Storage

2C111

Gas Room

2C211

EMS

2C110

Semi-Restricted

2C100B

Office

2D261C

Control

2D261

59459

M.P. LONG

O F

G E

ERT

L EA

E I N

F OO

FREDRICK, FREDRICK & HELLER

ENGINEERS, INC.

672 EAST ROYALTON ROAD

BROADVIEW HTS., OHIO 44147

TEL. (440) 546-9696

FAX: (440) 546-9699

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

FULLY SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

1DESIGN AND CONSTRUCTION DOCUMENTS AS

INSTRUMENTS OF SERVICE ARE GIVEN IN

CONFIDENCE AND REMAIN THE PROPERTY OF

PERSPECTUS ARCHITECTURE. THE USE OF THIS

DESIGN AND THESE CONSTRUCTION

DOCUMENTS FOR PURPOSES OTHER THAN THE

SPECIFIC PROJECT NAMED HEREIN IS STRICTLY

PROHIBITED WITHOUT THE EXPRESSED

WRITTEN CONSENT OF PERSPECTUS

13212 Shaker Square Suite 204 Cleveland, Ohio 44120 P. 216.752.1800 F. 216.752.3833

18067

Z M y D o c u m e n ts \1

F F

H C

F R jd u a le .r v t

3-ES2-2

10701 East Blvd. Cleveland, OH 44106

06/26/2020 MPL JRD

541-19-101Renovate Operating RoomsBID ISSUEPARTIAL SECOND FLOOR F.A. & SECURITY

PLAN - PHASE 3

FIRE ALARM GENERAL NOTES

F1 ALL FIRE ALARM SYSTEM DEVICES SHALL BE CONNECTED COMPLETE TO THE MAIN FIRE ALARM SYSTEM CONTROL

PANEL IN ACCORDANCE WITH ENGINEER APPROVED MANUFACTURER'S SHOP DRAWING WIRING DIAGRAMS AND

DETAILS.

F2 ALL FIRE ALARM SYSTEM CONDUCTORS SHALL BE INSTALLED IN 3/4" MINIMUM SIZE CONDUIT SYSTEM.

F3 IN GENERAL ALL MANUAL PULL STATIONS SHALL BE INSTALLED AT 48" ABOVE FINISHED FLOOR. MANUAL PULL STATIONS SHALL BE INSTALLED WITHIN 5'-0" OF ALL EXIT DOORWAY OPENINGS AT EACH EXIT ON EACH FLOOR.

ADDITIONAL MANUAL PULL STATIONS SHALL BE PROVIDED SO THAT THE TRAVEL DISTANCE TO THE NEAREST PULL

STATION WILL NOT EXCEED 200' MEASURED HORIZONTALLY ON THE SAME FLOOR.

INSTALLED AT LOCATIONS AS INDICATED ON FLOOR PLANS.

F5 IN GENERAL SMOKE DETECTORS SHALL BE INSTALLED ON CEILINGS WITH SPACING NOT TO EXCEED

MANUFACTURER'S RECOMMENDATION.

F6 SPRINKLER SYSTEM WATERFLOW ALARM INITIATING DEVICES SHALL BE CONNECTED COMPLETE TO THE FIRE

ALARM SYSTEM.

LENGTHS WITH THE MECHANICAL CONTRACTOR PRIOR TO ROUGH-IN.

F8 PROVIDE ALL FIRE ALARM SYSTEM COMPONENTS NECESSARY FOR SHUT DOWN OF HVAC EQUIPMENT BY THE FIRE

ALARM SYSTEM WHERE SAME IS REQUIRED.

F9 PROVIDE ALL FIRE ALARM SYSTEM COMPONENTS NECESSARY FOR ELEVATOR CAPTURE BY THE FIRE ALARM

SYSTEM WHERE SAME IS REQUIRED.

F10 SMOKE DETECTORS SHALL BE INSTALLED WITHIN 5'-0" OF CENTERLINE OF SMOKE DOORS ON HOLD-OPEN.

F11 SMOKE DETECTORS SHALL NOT BE LOCATED CLOSER THAN 3'-0" FROM AN AIR SUPPLY DIFFUSER.

BUILDINGS.

0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'0' 4' 8' 16' 32'

1/8" = 1'-0"

PARTIAL SECOND FLOOR FIRE ALARM AND

SECURITY PLAN - PHASE 3 1

# CODED NOTES:

CONNECT ALL NEW FIRE ALARM DEVICES TO EXISTING FIRE ALARM TERMINAL CABINET IN TELECOM ROOM 2-C363.

CONNECT ALL NEW SECURITY DEVICES AND SECURITY CAMERA TO EXISTING LENEL CONTROL PANEL IN TELECOM ROOM 2-C363. REFER TO DRAWING 0-ES1-2 AND 0-ES1-3 FOR ADDITIONAL INFORMATION.

PHASING GENERAL NOTES:

ALL WORK IN PHASE 3 SHALL BE DONE DURING OFF-HOURS. REFER TO THE GENERAL REQUIREMENTS FOR

ADDITIONAL INFORMATION.

REFER TO ARCHITECTURAL DRAWINGS FOR SUB PHASES IN PHASE 3.

18067 FFH CF R19_jduale

0-ES1-1 - ELECTRONIC SAFETY AND SECURITY LEGEND & NOTES

3-ES2-2 - PARTIAL SECOND FLOOR F.A. & SECURITY PLAN - PHASE 3.pdf

18067 FFH CF R19_jduale

3-ES2-2 - PARTIAL SECOND FLOOR F.A. & SECURITY PLAN - PHASE 3

3-ES2-1 - PARTIAL SECOND FLOOR F.A. AND SECURITY DEMO PLAN - PHASE 3.pdf

18067 FFH CF R19_jduale

3-ES2-1 - PARTIAL SECOND FLOOR F.A. AND SECURITY DEMO PLAN - PHASE 3

2-ES2-2 - PARTIAL SECOND FLOOR F.A. & SECURITY PLAN - PHASE 2.pdf

18067 FFH CF R19_jduale

2-ES2-2 - PARTIAL SECOND FLOOR F.A. & SECURITY PLAN - PHASE 2

2-ES2-1 - PARTIAL SECOND FLOOR F.A. & SECURITY DEMO PLAN - PHASE 2.pdf

18067 FFH CF R19_jduale

2-ES2-1 - PARTIAL SECOND FLOOR F.A. & SECURITY DEMO PLAN - PHASE 2

0-ES1-3 - ACCESS CONTROLLED DOOR DETAILS AND NOTES.pdf

18067 FFH CF R19_jduale

0-ES1-3 - ACCESS CONTROLLED DOOR DETAILS AND NOTES

0-ES1-2 - ACCESS CONTROL SYSTEM RISER, DIAGRAM, AND NOTES.pdf

18067 FFH CF R19_jduale

0-ES1-2 - ACCESS CONTROL SYSTEM RISER, DIAGRAM, AND NOTES

File details come from the government source that posted it. Updated Aug 13, 2020.