Roseboro Rescue plans ARCHITECT FULL SET R2 09-08-2025.pdf

PDF 28 MB Posted Jun 2, 2026

Attached to: IFB #001-26 Invitation for Formal Bids for Roseboro Emergency Services Building
Solicitation number: 571-IFB #001-26
Issued by: Stanly County, Cleveland Town, North Carolina

About this file

Written by GovTribe AI · Jun 8, 2026

This document is a comprehensive architectural full set of plans and specifications prepared by Andrew W. Privette, AIA, for the Roseboro Rescue Emergency Services Building in Roseboro, North Carolina, in coordination with Sampson County's Invitation for Formal Bids (IFB #001-26). The project encompasses a new premanufactured emergency services facility utilizing a single prime lump sum construction contract. The architectural plans include 13 drawing sheets covering structural, architectural, electrical, mechanical, and plumbing systems. Key design features include a 2,400 square foot interior business use space with 24 calculated occupants, multiple rooms designated for emergency services operations including day room, offices, equipment storage, and toilet facilities. The design incorporates life safety requirements including proper exit configurations with minimum 34-inch clear width exits, emergency lighting, smoke detectors, carbon monoxide detectors, fire extinguishers, and emergency egress pathways. The facility utilizes a preengineered metal building system with metal roofing, metal siding, and various wall assemblies including brick veneer options. The sealed bid opening is scheduled for 2:00 PM on Wednesday, June 24, 2026, at the Sampson County Administration Building in Clinton, North Carolina, with a non-mandatory pre-bid conference at the same location on Monday, June 15, 2026 at 2:00 PM.

The structural design adheres to the North Carolina Building Code 2018 Edition and incorporates specific load requirements including 20 PSF roof live loads, 50 PSF private room loads, and 100 PSF public room and corridor loads. Concrete specifications call for minimum 3,000 PSI compressive strength for footings, foundation walls, and grade slabs, with reinforcing steel meeting ASTM A-615 Grade 60 standards. Seismic design is classified under Category B with a response modification coefficient of 6 for steel concentrically braced frames, while wind design parameters specify 140 VMPH ultimate wind speed under ASCE 7-16 standards. The architect requires written approval for any deviations from the drawings and specifications prior to construction. All contractors are responsible for including minor items not explicitly shown on plans but required by code and for proper system operation at no additional cost to the owner, and must maintain full sets of contract documents for employee use and ensure coordination among all trades. Revision 02 dated August 27, 2025 includes sprinkler system updates and other modifications to the design.

View the file

Other files

File	Type	Posted
Roseboro EMS Building - Addendum #1.pdf	PDF	Jun 2, 2026
Roseboro EMS Plans CIVIL ENGINEERING FULL SET.pdf	PDF	Jun 2, 2026
Invitation for Formal Bids for Roseboro EMS Building (IFB #001-26).pdf	PDF	Jun 2, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

W D

O C

T O

R M

A R

L U

T H

E R

G J

R O

S E

B O

R O

R E

S C

U E

A Sensible Approach toDesigned Build

R O

S E

B O

R O

N O

R T H

C A

R O

ANDREW W. PRIVETTE, ARCHITECT

1920 FT. BRAGG ROAD - FAYETTEVILLE, N.C. 28303 - (910) 485-8567

W DR MARTIN LUTHER KING JR BLVD

FEBRUARY 13, 2025

ROSEBORO, NORTH CAROLINA

43 20251982 vrind r

Pew W.

e tet

ILST

ROHT A

AS REVNN IA R

CR DEE A

CEN

A Sensible Approach toDesigned Build

ROSEBORO EMS RESCUE

AutoCAD SHX Text G-101

AutoCAD SHX Text

N.C. BUILDING CODE

AutoCAD SHX Text

SUMMARY &

AutoCAD SHX Text

COVER SHEET

AutoCAD SHX Text

A. PRIVETTE

AutoCAD SHX Text

A. PRIVETTE

AutoCAD SHX Text EACH CONTRACTOR IS REQUIRED TO INCLUDE ALL MINOR ITEMS, WHETHER OR NOT SHOWN ON PLANS, AS REQUIRED BY CODE AND FOR WORKING SYSTEMS, IN INITIAL COST OF WORK, AND AT NO ADDITIONAL COST TO THE OWNER

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB CODE:

AutoCAD SHX Text

MARK

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CHK

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text D

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text P

AutoCAD SHX Text W.

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text Y

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text E

AutoCAD SHX Text C

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text E, AutoCAD SHX Text T

AutoCAD SHX Text I

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text N

AutoCAD SHX Text ANY DEVIATIONS FROM THESE DRAWINGS AND SPECIFICATIONS BY THE OWNER OR CONTRACTOR MUST BE APPROVED BY THE ARCHITECT IN WRITING AND PRIOR TO CONSTRUCTION.

AutoCAD SHX Text COPYRIGHT © ALL RIGHTS RESERVED BY DESIGNED TO BUILD. NOT TO BE COPIED OR REPRODUCED WITHOUT WRITTEN PERMISSION. ALL RIGHTS RESERVED BY DESIGNED TO BUILD. NOT TO BE COPIED OR REPRODUCED WITHOUT WRITTEN PERMISSION.

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

SHEET TITLE:

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text DRAWINGS, SPECIFICATIONS AND THE DESIGN ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. WHETHER THE PROJECT FOR WHICH THEY ARE PREPARED IS EXECUTED OR NOT. THE DRAWINGS AND SPECIFICATIONS SHALL NOT BE USED BY THE PROJECT OWNER OR ANY OTHER PARTY FOR OTHER PROJECTS, ADDITIONS TO THIS PROJECT, OR FOR COMPLETION OF THIS PROJECT EXCEPT BY AGREEMENT IN WRITING AND WITH APPROPRIATE COMPENSATION TO THE ARCHITECT.

AutoCAD SHX Text

ANDREW W. PRIVETTE, AIA

AutoCAD SHX Text

1920 FT. BRAGG ROAD

AutoCAD SHX Text

FAYETTEVILLE,

AutoCAD SHX Text

NORTH CAROLINA 28303

AutoCAD SHX Text

TELE. (910) 485-8567

AutoCAD SHX Text d2bandrew@gmail.com

AutoCAD SHX Text

24ROSEBORO RESCUE

AutoCAD SHX Text

24ROSEBORO RESCUE

AutoCAD SHX Text

REV 01

AutoCAD SHX Text

CODE SUMMARY UPDATE - ACCESSORY USE R2 - 2 HOUR SEPARATION

AutoCAD SHX Text 08.19.25

AutoCAD SHX Text

AWP

AutoCAD SHX Text

REV 02

AutoCAD SHX Text

SPRINKLER AND OTHER UPDATES

AutoCAD SHX Text 08.27.25

AutoCAD SHX Text

PERMITTING STAMP:

AutoCAD SHX Text

24ROSEBORO RESCUE

AutoCAD SHX Text ALL NOTES APPLY TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL NOTES APPLY TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL NOTES APPLY TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL APPLY TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL APPLY TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL OF WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL WORK BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL BY ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL ALL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL OTHER CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL CONTRACTORS AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL AND TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL TRADES. CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL CONTRACTORS SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL SHALL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL FOLLOW MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL MANUFACTURER'S INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL INSTALLATION INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL INSTRUCTIONS. THE REQUIREMENTS OF THE DRAWINGS, GENERAL THE REQUIREMENTS OF THE DRAWINGS, GENERAL THE REQUIREMENTS OF THE DRAWINGS, GENERAL REQUIREMENTS OF THE DRAWINGS, GENERAL REQUIREMENTS OF THE DRAWINGS, GENERAL OF THE DRAWINGS, GENERAL OF THE DRAWINGS, GENERAL THE DRAWINGS, GENERAL THE DRAWINGS, GENERAL DRAWINGS, GENERAL DRAWINGS, GENERAL GENERAL GENERAL REQUIREMENTS AND ALL ITEMS OF THE CONTRACT DOCUMENTS ARE EQUALLY BINDING ON ALL CONTRACTORS AND TRADES. EACH CONTRACTOR IS REQUIRED TO MAINTAIN FULL SETS OF THE CONTRACT DOCUMENTS FOR HIS EMPLOYEES' USE ON THE PROJECT TO ASSURE THAT ALL WORK IS PROPERLY COORDINATED AND INSTALLED WITH THE WORK OF OTHER CONTRACTORS AND TRADES.

AutoCAD SHX Text

DATE: 02/13/2025

AutoCAD SHX Text

AWP

AutoCAD SHX Text LIST OF DRAWINGS GENERAL: G-101 NORTH CAROLINA BUILDING CODE SUMMARY AND COVER SHEET G-102 LIFE SAFETY PLAN AND WALL ASSEMBLIES STRUCTURAL: S-101 STRUCTURE NOTES S-102 FOUNDATION PLAN AND FOOTING DETAILS ARCHITECTURAL: A-101 DIMENSIONED FLOOR PLAN, WINDOW AND DOOR SCHEDULES A-102 REFLECTED CEILING PLAN A-103 ROOF PLAN A-201 EXTERIOR ELEVATION, ENLARGED PLANS AND INTERIOR ELEVATIONS A-301 BUILDING SECTION, WALLS SECTIONS AND DETAILS ELECTRICAL: E.1 ELECTRICAL NOTES, SCHEDULES AND DETAILS ELECTRICAL NOTES, SCHEDULES AND DETAILS E.2 ELECTRICAL POWER PLAN ELECTRICAL POWER PLAN E.3 ELECTRICAL LIGHTING PLAN ELECTRICAL LIGHTING PLAN MECHANICAL: M.1 HVAC NOTES, DETAILS & SCHEDULES HVAC NOTES, DETAILS & SCHEDULES M.2 HVAC PLAN HVAC PLAN PLUMBING: P.1 PLUMBING PLAN PLUMBING PLAN

AutoCAD SHX Text

2 2 2 2 2

2 1

11111111111

K-3544HIGHLINEC_TOILETSVITREOUS CHINA

W D

O C

T O

R M

A R

L U

T H

E R

G J

R O

S E

B O

R O

R E

S C

U E

A Sensible Approach toDesigned Build

R O

S E

B O

R O

N O

R T H

C A

R O

OCCUPANT LOAD AND EXIT WIDTH

EXIT REQUIREMENTS

NUMBER AND ARRANGEMENT OF EXITS

FLOOR, ROOM

AND/OR SPACE

(TABLE 1017.2)

DESIGNATION

MINIMUM

NUMBER OF EXITS

REQUIRED

TRAVEL DISTANCE

ALLOWABLE

TRAVEL DISTANCE

SHOWN

ON PLANS

ACTUAL TRAVEL

DISTANCE

SHOWN ON PLANS BETWEEN

ARRANGEMENT MEANS OF

REQUIRED

DISTANCE

EGRESS (SECTION 1006.2.2)1,3

ACTUAL

DISTANCE

SHOWN

EXIT DOORS ON PLANS

AND/OR SPACE

USE GROUP (A)

DESIGNATION

BUSINESS

AREA

SQ. FT.

(B)

1 AREA

PER

OCCUPANT

(A/B)

NUMBER

OCCUPANT

(C)

EGRESS WIDTH

PER OCCUPANT

SECTION (1005.1)

STAIR LEVEL

EXIT WIDTH (in)

REQUIRED WIDTH

(SECTION 1005.1)

(A/B)XC

STAIR

2,3,4,5

LEVEL STAIR LEVEL

ACTUAL WIDTH

SHOWN ON PLANS

TOTAL INTERIOR OCCUPANTS:

2,400 SF 100 24 N/A 0.20 N/A 4.8 N/A 102"

business 2 2 200' 70' 39'

CORRIDOR DEAD ENDS (SECTION 1020.4)1

SINGLE EXITS (SECTION 1006.2.1.1; SECTION 1022.2)2

COMMON PATH OF EGRESS TRAVEL (SECTION 1029.8)3

35'

AutoCAD SHX Text

NEWSW

AutoCAD SHX Text

PEOPLE

AutoCAD SHX Text

5 TON

AutoCAD SHX Text

NEWSW

AutoCAD SHX Text

PEOPLE

AutoCAD SHX Text

AutoCAD SHX Text 69'-9 " (ONE-HALF DIAGONAL DISTANCE =34'-10 " 78" (ONE-HALF DIAGONAL DISTANCE =34'-10 " 12"

AutoCAD SHX Text 38'-5 "18"

AutoCAD SHX Text

EXIT: CLEAR WIDTH = 34" CALC. OL = 170 ACTUAL OL = 12

AutoCAD SHX Text

BUSINESS: 100 SQ FT (GROSS) 2,400 SQ. FT. = 24 OCCUPANTS

AutoCAD SHX Text

EXIT: CLEAR WIDTH = 34" CALC. OL = 170 ACTUAL OL = 12

AutoCAD SHX Text S

AutoCAD SHX Text

EXIT: CLEAR WIDTH = 34" CALC. OL = 170 ACTUAL OL = 12

AutoCAD SHX Text

BAY AREA

AutoCAD SHX Text

DAY ROOM

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

ROOM 4

AutoCAD SHX Text

ROOM 3

AutoCAD SHX Text

ROOM 2

AutoCAD SHX Text

ROOM 1

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

HALL

AutoCAD SHX Text E.W.

AutoCAD SHX Text 2017 ICC A117.1 603.2.2 EXCEPTION 2: DOOR MAY SWING INTO THE CLEAR FLOOR SPACE OR CLEARANCE OF ANY FIXTURE WHERE THE ROOM IS FOR INDIVIDUAL USE AND A CLEAR FLOOR SPACE COMPLYING WITH SECTION 305.3 (30x52) IS PROVIDED WITHIN THE ROOM BEYOND THE ARC OF THE DOOR SWING.

AutoCAD SHX Text

4'-6" MIN. ABSOLUTE

AutoCAD SHX Text

1'-0" MAX

AutoCAD SHX Text

3'-6" MIN.

AutoCAD SHX Text

3'-6" MAX.

AutoCAD SHX Text 39"-41"

AutoCAD SHX Text

2'-0" MIN.

AutoCAD SHX Text

7'-3"± DEPENDS ON WIDTH OF LAVATORY

AutoCAD SHX Text

1'-3" MIN.

AutoCAD SHX Text

5'-0" CLEAR REQUIRED

AutoCAD SHX Text 16"-18"

AutoCAD SHX Text C/L W.C.

AutoCAD SHX Text

1'-0" MIN.

AutoCAD SHX Text

2'-0" MIN.

AutoCAD SHX Text

2'-0" MIN.

AutoCAD SHX Text

12" SPECIAL

AutoCAD SHX Text

SOAP DISPENSER

AutoCAD SHX Text

PAPER TOWEL DISPENSER

AutoCAD SHX Text

TOILET PAPER DISPENSER

AutoCAD SHX Text

FLUSH CONTROL OPPOSITE SIDEWALL GRAB BAR

AutoCAD SHX Text

OPEN-FRONT SEAT REQUIRED

AutoCAD SHX Text 60"x56"

AutoCAD SHX Text 30"x52"

AutoCAD SHX Text

67"DIAMETER

AutoCAD SHX Text 74"

AutoCAD SHX Text

SIDE

AutoCAD SHX Text

FRONT

AutoCAD SHX Text

33" MIN.-36" MAX.

AutoCAD SHX Text 18"

AutoCAD SHX Text

MIN.

AutoCAD SHX Text

12" MAX.

AutoCAD SHX Text 39"-41"

AutoCAD SHX Text 6'-2"

AutoCAD SHX Text

18" MIN.

AutoCAD SHX Text 39"-41"

AutoCAD SHX Text

40" MAX.

AutoCAD SHX Text

34" MAX.

AutoCAD SHX Text

29" MIN.

AutoCAD SHX Text

27" MIN.

AutoCAD SHX Text

PAPER TOWEL DISPENSER

AutoCAD SHX Text

MIRROR

AutoCAD SHX Text

GRAB BAR

AutoCAD SHX Text 17"-19"

AutoCAD SHX Text

TOP OF SEAT

AutoCAD SHX Text 33"-36"

AutoCAD SHX Text 7'-3"

AutoCAD SHX Text 4"

AutoCAD SHX Text FLUSH CONTROLS TO ALWAYS BE OPPOSITE THE SIDEWALL BAR THEREFORE THERE WILL BE LEFT & RIGHT HAND TANKS.

AutoCAD SHX Text

TOILET PAPER DISPENSER

AutoCAD SHX Text

SOAP DISPENSER

AutoCAD SHX Text

MIRROR

AutoCAD SHX Text

SOAP DISPENSER

AutoCAD SHX Text

WRAP WATER & WASTE PIPES

AutoCAD SHX Text

PAPER TOWEL DISPENSER

AutoCAD SHX Text

FRONT ELEVATION

AutoCAD SHX Text

LEFT ELEVATION

AutoCAD SHX Text

RIGHT ELEVATION

AutoCAD SHX Text G-102

AutoCAD SHX Text

LIFE SAFETY PLAN

AutoCAD SHX Text

J. PAZ

AutoCAD SHX Text

A. PRIVETTE

AutoCAD SHX Text

CHECKED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

JOB CODE:

AutoCAD SHX Text

MARK

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CHK

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text D

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text P

AutoCAD SHX Text W.

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text Y

AutoCAD SHX Text T

AutoCAD SHX Text H

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text E

AutoCAD SHX Text C

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text E, AutoCAD SHX Text T

AutoCAD SHX Text I

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text L

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text N

AutoCAD SHX Text ANY DEVIATIONS FROM THESE DRAWINGS AND SPECIFICATIONS BY THE OWNER OR CONTRACTOR MUST BE APPROVED BY THE ARCHITECT IN WRITING AND PRIOR TO CONSTRUCTION.

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

SHEET TITLE:

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

ANDREW W. PRIVETTE, AIA

AutoCAD SHX Text

1920 FT. BRAGG ROAD

AutoCAD SHX Text

FAYETTEVILLE,

AutoCAD SHX Text

NORTH CAROLINA 28303

AutoCAD SHX Text

TELE. (910) 485-8567

AutoCAD SHX Text d2bandrew@gmail.com

AutoCAD SHX Text

24ROSEBORO RESCUE

AutoCAD SHX Text

24ROSEBORO RESCUE

AutoCAD SHX Text

REV 01

AutoCAD SHX Text

CODE SUMMARY UPDATE - ACCESSORY USE R2 - 2 HOUR SEPARATION

AutoCAD SHX Text 08.19.25

AutoCAD SHX Text

AWP

AutoCAD SHX Text

REV 02

AutoCAD SHX Text

SPRINKLER AND OTHER UPDATES

AutoCAD SHX Text 08.27.25

AutoCAD SHX Text

PERMITTING STAMP:

AutoCAD SHX Text

24ROSEBORO RESCUE

AutoCAD SHX Text

DATE: 02/13/2025

AutoCAD SHX Text

AWP

AutoCAD SHX Text

SMOKE DETECTOR, CEILING MOUNTED

AutoCAD SHX Text S

AutoCAD SHX Text

EGRESS TRAVEL PATH

AutoCAD SHX Text

REMOTE POINT

AutoCAD SHX Text

FIRE EXTINGUISHER

AutoCAD SHX Text

EXIT SIGN

AutoCAD SHX Text

EMERGENCY LIGHT

AutoCAD SHX Text

EMERGENCY LIGHT/ EXIT SIGN COMBO

AutoCAD SHX Text

CARBON MONOXIDE DETECTOR

AutoCAD SHX Text

LEGEND::

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text A1

AutoCAD SHX Text

LIFE SAFETY PLAN

AutoCAD SHX Text 1/4" : 1'-0"

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text 4'

AutoCAD SHX Text 8'

AutoCAD SHX Text

AutoCAD SHX Text 16'

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text D1

AutoCAD SHX Text

ADA TOILET ELEVATIONS & PLAN

AutoCAD SHX Text 1/4" : 1'-0"

AutoCAD SHX Text

PRE-ENGINEERED METAL

AutoCAD SHX Text R02

AutoCAD SHX Text

ASSEMBLY SECTION - ROOF

AutoCAD SHX Text

OUTSIDE AIR FILM

AutoCAD SHX Text

METAL ROOFING

AutoCAD SHX Text

BLANKET INSULATION

AutoCAD SHX Text

SCREW-BOLT

AutoCAD SHX Text

'Z' PURLIN WITH

AutoCAD SHX Text

INSIDE AIR FILM

AutoCAD SHX Text R=0.17

AutoCAD SHX Text R=10.00

AutoCAD SHX Text R=0.61

AutoCAD SHX Text

TOTAL ASSEMBLY R = 29.78, U = 0.0336

AutoCAD SHX Text

THERMAL SPACER

AutoCAD SHX Text

CAVITY INSULATION

AutoCAD SHX Text R=19.0

AutoCAD SHX Text

METAL EXT.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jun 8, 2026.