RFQ Attachment 2_Technical Matrix Engine Lathe.docx
DOCX document 2 MB Posted
- Attached to
- AFLCMC Engine Lathe
- Solicitation number
- 47QSWC25Q0192
- Issued by
-
GSA Federal Acquisition Service
About this file
This document is a Request for Quote (RFQ) technical matrix for an Engine Lathe, detailing precise specifications for a floor-mounted toolroom lathe for the United States Air Force Life Cycle Material Command (AFLCMC). The lathe requires 220V, 3-phase power, with specific technical parameters including an 18-inch center-to-center distance, spindle speeds ranging from 125 to 3000 RPM, and a spindle hole diameter of 1.25 inches. Key dimensional specifications include a length of 71.5 inches, width of 31 inches, height of 72.75 inches, and a weight of 2,250 pounds.
The solicitation (Number 47QSWC25Q0192) is a small business set-aside, firm-fixed price supply contract conducted under FAR Part 13 Simplified Acquisition Procedures. The purpose is to supply engine lathes that enable precise shaping, cutting, and finishing of metal and rigid materials. Vendors must provide two hard copies and one electronic copy of technical data, with a 365-day After Receipt of Order (ARO) timeline. The procurement is being managed through the GSA Federal Acquisition Service, with the technical matrix serving as a critical evaluation tool to determine the acceptability of submitted engine lathes on a pass/fail basis.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ_Attachment 3_Technical Matrix Engine Lathe
The required characteristics are listed in the first column. Vendors shall insert their offered characteristics in the second column along with specifying whether quoter meets, does not meet or exceeds the required characteristic and identify in the third column where in the descriptive literature/reference material those characteristics are shown as evidence of meeting the required specification. This is for the Engine Lathe.
This chart shall be completed by the QUOTER. All entries to this chart shall be typed. The chart will be used to evaluate your offer to determine the acceptability Pass/Fail of the Engine Lathe. Attached product descriptive literature (see Clause 52.214-21, Descriptive Literature, for additional information).
MINIMUM SPECIFICATIONS/CHARACTERISTIC
NOTE: (!!! CHANGING ANY INFORMATION IN THIS COLUMN WILL INVALIDATE YOUR OFFER!!!!!)
| QUOTER'S SPECIFICATION/CHARACTERISTIC (Specify if quoter meets, does not meet or exceeds required specification. If indicating “does not meet” or “exceeds requirement”, provide details as to how it lacks or exceeds requirement. |
| QUOTER'S DESCRIPTIVE LITERATURE REFERENCE |
(QUOTER shall provide page and paragraph in descriptive literature/reference material as evidence of required specification.)
Government Evaluation Pass/Fail (Provide details as to why Pass or Fail)
Note: Quoters leave blank
Toolroom lathe, floor mounted
Power: 220 V, 3 phase, 60Hz
Hand and power operated
Geared Head
Center to Center: 18 in
Spindle Speed: 125 to 3000 RPM
Spindle hole diameter: 1.25 in
Swing over bed: 11 in
Swing over carriage: 9 in
Swing over cross: 6 in
MINIMUM SPECIFICATIONS/CHARACTERISTIC
NOTE: (!!! CHANGING ANY INFORMATION IN THIS COLUMN WILL INVALIDATE YOUR OFFER!!!!!)
| QUOTER'S SPECIFICATION/CHARACTERISTIC (Specify if quoter meets, does not meet or exceeds required specification. If indicating “does not meet” or “exceeds requirement”, provide details as to how it lacks or exceeds requirement. |
| QUOTER'S DESCRIPTIVE LITERATURE REFERENCE |
(QUOTER shall provide page and paragraph in descriptive literature/reference material as evidence of required specification.)
Government Evaluation Pass/Fail (Provide details as to why Pass or Fail)
Note: Quoters leave blank
Thread quantity range: 11 to 108 per inch
Dimensions
· Length: 71.5 in.
· Width: 31 in.
· Height: 72.75 in.
· Weight 2250 lb.
Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.
After Receipt of Order (ARO) 365 Days
File details come from the government source that posted it. Updated .