RFP_N6426725R1008.pdf
PDF 2 MB Posted
- Attached to
- CANCELED* Fiber Optic Measurement System
- Solicitation number
- N6426725R1008
About this file
This is a solicitation (Request for Proposal) from the Naval Surface Warfare Center, Corona Division for up to 32 Fiber Optic Measurement Systems via a five-year Indefinite Delivery, Indefinite Quantity (IDIQ) contract. The systems will be used to calibrate Optical Loss Test Sets and Optical Time Domain Reflectometers across Navy Calibration Laboratories, replacing discontinued manufacturer products. The procurement is a Lowest Price Technically Acceptable (LPTA) acquisition with two contract line items (CLINs), each with a minimum quantity of 15 and maximum of 32 units.
The evaluation will be conducted on two factors: Technical and Past Performance, both assessed on an acceptable/unacceptable basis. Technical proposals are limited to 30 pages and must demonstrate compliance with the Calibration Standard Specification (CSS) 04-3008. Offerors must provide operator manuals, warranty information, calibration certificates, repairable parts lists, and software/firmware version details. The contract will require unique item identification for each system, and contractors must provide documentation showing prices for similar previously sold items. Proposals must be submitted to the Naval Surface Warfare Center in Norco, California, with a 180-day validity period.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SF30_N6426725R1008_0002.pdf | ||
| Question and Answers (Updated 11.5.25) - N6426725R1008.docx | DOCX document | |
| N6426725R1008_Conformed.pdf | ||
| Question and Answers - N6426725R1008.docx | DOCX document | |
| SF30_N6426725R1008_0001.pdf | ||
| Question and Answers - N6426725R1008.docx | DOCX document | |
| Question and Answers - N6426725R1008.docx | DOCX document | |
| Attachment 01_CSS 04-3008_N6426725R1008.pdf | ||
| Attachment 02_Past Performance Reference_N6426725R1008.pdf | ||
| Exhibit A_N6426725R1008.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
This page is left intentionally blank
N6426725R1008
This page is left intentionally blank
Section B - Supplies or Services & Prices or Costs
Additional Information/Notes
CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE
The minimum quantity and contract value for all orders issued against this contract shall not be less than the minimum quantity and contract value stated in the following table. The maximum quantity and contract value for all orders issued against this contract shall not exceed the maximum quantity and contract value stated in the following table.
MINIMUM QUANTITY MINIMUM AMOUNT MAXIMUM QUANTITY MAXIMUM AMOUNT
30.00 64.00
DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND ORDER VALUE
The minimum quantity and order value for each Delivery/Task Order issued shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for each Delivery/Task Order issued shall not exceed the maximum quantity and order value stated in the following table.
MINIMUM QUANTITY MINIMUM AMOUNT MAXIMUM QUANTITY MAXIMUM AMOUNT
2.00 20.00
CLIN MINIMUM/MAXIMUM QUANTITY AND CLIN VALUE
The minimum quantity(s) and CLIN value(s) for all orders issued against the CLIN(s) on this contract shall not be less than the minimum quantity(s) and CLIN value(s) stated in the following table. The maximum quantity(s) and CLIN value(s) for all orders issued against the CLIN(s) on this contract shall not exceed the maximum quantity(s) and CLIN value(s) stated in the following table.
CLIN MINIMUM QUANTITY MINIMUM AMOUNT MAXIMUM QUANTITY MAXIMUM AMOUNT
0001 15.00 32.00
0002 15.00 32.00
CLIN DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND CLIN ORDER VALUE
The minimum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not exceed the maximum quantity and order value stated in the following table.
CLIN MINIMUM QUANTITY MINIMUM AMOUNT MAXIMUM QUANTITY MAXIMUM AMOUNT
0001 1.00 10.00
0002 1.00 10.00
(End of text)
Allowed Per Order Minimum: 99,999,999 Each Maximum: 99,999,999 Each
Government Minimum/Maximum to Order Minimum: 99,999,999 Each Maximum: 99,999,999 Each
Item Supplies/Service Estimated Quantity
Unit Unit Price Amount
Fiber Optic Systems
NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.
General Specification Number: Calibration Standard Specification
(CSS) 04-3008
Pricing Arrangement: Firm Fixed Price
32 Each
Exhibit A
Exhibit Identifier: A Pricing Arrangement: Firm Fixed Price
32 Each
Section C - Description/Specifications/Statement of Work Statement of Work
1. INTRODUCTION
The Naval Surface Warfare Center, Corona Division (Corona Division), Measurement Science and Engineering Department perform Metrology, Test, and Monitoring Systems Assessment supporting the Naval Sea Systems Command (NAVSEA) Metrology and Calibration (METCAL) Program. Measurement Science and Engineering Department sets the measurement science and calibration standards to support proper weapons operation, interoperability and peak readiness for the fleet.
2. BACKGROUND
Measurement Science and Engineering Department Corona has a requirement to provide Test and Measurement Diagnostic Equipment (TMDE) and /or associated components for the NAVSEA Calibration Standards (CALSTD) Program to support the Navy Calibration Laboratories with calibration standard test equipment and/or support of test equipment.
The required Fiber Optic Measurement Systems are replacing various products discontinued by the manufacturer over the last two years with no parts available for repairs.
The Fiber Optic Measurement Systems are used to calibrate various Optical Loss Test Sets and Optical Time Domain Reflectometers across many Navy Calibration Laboratories.
3. SCOPE
The scope of this effort is to procure up to 32 Fiber Optic Measurement Systems via a five (5) year Indefinite Delivery, Indefinite Quantity (IDIQ) for Naval Air Systems Command and NAVSEA. Specifications are detailed in Calibration Standard Specification (CSS) 04-3008 (Attachment 1).
4. APPLICABLE DOCUMENTS
Document Type/No. Description Document Date
CSS 04-3008
Fiber Optic Measurement System CSS
Attachment 1 September
Department of the Navy (DON) Policy Memorandum
DON Policy on Digital Product /Technical Data https://www.navsea.navy.mil/Portals/103/Documents /NSWC_Carderock/Policy.fin.041023.pdf
October
5. REQUIREMENTS
Refer to Attachment 1, CSS 04-3008 for specifications.
5.1 The Contractor shall provide operator/service manual(s) required to be supplied with each system. At a minimum, these manual(s) shall contain information on operational instructions. The manuals can be either print or electronic media format on either Compact Disc Read-Only Memory (CD- ROM) or Digital Video Disc (DVD). [Contract Data Requirements List (CDRL) T001]
5.2 Warranty: The contractor shall provide the standard commercial warranty for the system from the date of acceptance.
5.3 A single, accredited calibration certificate with a report referencing actual data for all calibrated components within the system shall be provided by the vendor to the Government for each system installed. (CDRL A001)
5.3.1 Calibration of all new standards must be traceable to the National Institute of Standards and Technology and result in an Accredited Certificate /Report of Calibration.
5.4 The Contractor shall provide a Repairable Parts list to the Government for each standard installed. (CDRL A002)
5.5 The Contractor shall provide a Software/Firmware Version Description to be provided with each system delivered and installed. The Software /Firmware version shall be the same on both installed systems. (CDRL A003)
5.6 The Contractor shall provide the Government with a Software/Firmware Change Request prior to any software/firmware changes to alert and inform the Government about changes to software/firmware and provide detailed information about the changes and estimated cost. The Software /Firmware Change Request shall be provided on CD-ROM or via an internet downloadable site to the Government for correction of software errors or commercially available improvements for the model numbers of the calibration standards installed for a period of not less than five (5) years. (CDRL A004)
N6426725R1008 https://www.navsea.navy.mil/Portals/103/Documents/NSWC_Carderock/Policy.fin.041023.pdf https://www.navsea.navy.mil/Portals/103/Documents/NSWC_Carderock/Policy.fin.041023.pdf
6. DELIVERABLES
Deliverables under this contract shall be provided in accordance with "DON Policy on Digital Product/Technical Data," Assistant Secretary of the Navy Research Development and Acquisition Memorandum of 23 Oct 2004 and shall be provided in accordance with the CDRL, DD Form 1423 and supporting Data Item Descriptions (DIDs).
NUMBER NAME DID
T001 Technical Manual DI-TMSS-80527C
A001 Calibration Certificate and Report DI-QCIC-80798B
A002 Repairable Parts List DI-ILSS-80134A
A003 Software Version Description DI-IPSC-81442A
A004 Firmware/Software Revisions DI-MISC-81807
(End of text)
Requirements Fiber Optic Measurement Systems
Section D - Packaging and Marking
PACKAGING OF DATA
Data to be delivered by Integrated Digital Environment (IDE) or other electronic media shall be as specified in the contract.
All unclassified data to be shipped shall be prepared for shipment in accordance with best commercial practice. Classified reports, data, and documentation shall be prepared for shipment in accordance with the National Industrial Security Program Operating Manual, 32 Code of Federal Regulations (CFR) Part 117.
(End of text)
Section E - Inspection and Acceptance
INSPECTION AND ACCEPTANCE
Inspection and acceptance of all data shall be as specified on the attached CDRLs, DD Form 1423.
(End of text)
Overall Contract Inspection/Acceptance Locations
Acceptance Location
Acceptance Other Instructions: In accordance with Section C Statement of Work
DoDAAC: N64267 CountryCode: USA
NAVAL SURFACE WARFARE CENTER
CORONA DIVISION, 1999 FOURTH STREET
NORCO, CA 92860
UNITED STATES
TBD, TBD
Telephone: TBD
Inspection Location
Inspection Destination Instructions: In accordance with Section C Statement of Work
DoDAAC: N48535 CountryCode: USA
CALIBRATION STDS READY ISSUE ACTIV.
PO BOX 55017, BEAUFORT SC 29904-5017
BEAUFORT, SC 29904-5017
UNITED STATES
TBD, TBD
Telephone: TBD
Section F - Deliveries or Performance
DELIVERY INSTRUCTIONS
This IDIQ consists of a five-year ordering period beginning on the date of contract award and expiring five (5) years thereafter.
1. For the IDIQ ordering period see FAR 52.216-18, below.
2. The delivery schedule below is for the first Delivery Order (DO) issued. All DO's thereafter shall be delivered 120 days After Date of Contract
(ADC).
3. Specific delivery dates, locations, and Points of Contact (POC) will be identified in each DO.
(End of text)
Contractor Destination
Line Item Delivery Schedule Estimated Quantity
Address and POC Special Handling/Notes
Delivery Schedule From date of lead time event to delivery 120 Calendar Days Date of Award
32 Each Ship To DoDAAC: N48535 CountryCode: USA
CALIBRATION STDS READY ISSUE
ACTIV.
BLDG 612 BAY 11, MCAS BEAUFORT
SC 29904-5002
MCAS BEAUFORT, SC 29904-5002
UNITED STATES
TBD, TBD
Telephone: TBD
FoB Details Contractor Destination
32 Each FoB Details
Contractor Destination
Section G - Contract Administration Data
POINTS OF CONTACT
GOVERNMENT CONTRACT ADMINISTRATION POINTS-OF-CONTACT AND RESPONSIBILITIES
(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.
(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.
(c) The points of contact are as follows:
Antonia Roman-VarelaThe Procuring Contracting Officer (PCO) is:
Naval Surface Warfare Center, Corona Division 1999 Fourth Street Norco, CA 92860 Telephone No. 951-393-5873 Email Address: antonia.roman.civ@us.navy.mil
Bryanna AlvarezThe Contract Specialist is:
1999 Fourth Street Norco, CA 92860 Telephone No. 951-393-5606 Email Address: bryanna.a.alvarez.civ@us.navy.mil
(d) The Contracting Officer's Representative (COR) is the contracting officer's appointed representative for technical matters. The COR is not a contracting officer and does not have the authority to direct the accomplishment of effort which is beyond the scope of the contract or to otherwise change any contract requirements. An informational copy of the COR appointment letter, which provides a delineation of COR authority and responsibilities, will be provided upon award of this contract.
A Contracting Officer's Representative (COR) shall not be appointed in this contract.
(e) The Technical Point of Contact (TPOC) is the contracting officer's representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.
TBDThe Technical Point of Contact (TPOC) is:
1999 Fourth Street Norco, CA 92860 Telephone No. TBD Email Address: TBD
(f) The Contractor's point of contact for performance under this contract is:
Name: TBD Title: TBD Address:
TBD
Phone: (Area Code) xxx- [xxxx] E-mail: TBD
(End of text)
HOURS OF OPERATION
HOURS OF OPERATION AND HOLIDAY SCHEDULE
(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods. Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by Corona Division. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific Instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at The contractor's expense with no cost or liability to the U.S. Government.
(b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual Date of observance for each of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link:
https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/
N6426725R1008 https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/
(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.
(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy.
Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company's established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.
(End of text)
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018
DFARS Clauses Incorporated by Full Text
252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.
authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.
Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.
Protocol.
(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.
WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following document type(s): Document type.
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
TO BE DETERMINED AT THE DELIVERY ORDER LEVEL
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.
when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC TBD
Issue By DoDAAC N64267
Admin DoDAAC N64267
Inspect By DoDAAC TBD
Ship To Code TBD
Ship From Code TBD
Mark For Code TBD
Service Approver (DoDAAC) TBD
Service Acceptor (DoDAAC) TBD
Accept at Other DoDAAC TBD
LPO DoDAAC TBD
DCAA Auditor DoDAAC TBD
Other DoDAAC(s) TBD
(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.
accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
TO BE DETERMINED AT THE DELIVERY ORDER LEVEL
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
Section H - Special Contract Requirements
Section I - Contract Clauses
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
52.203-3 Gratuities. Apr 1984 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-21 Basic Safeguarding of Covered Contractor Information Systems. Nov 2021 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022
252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.
(DEVIATION 2024-O0013 REVISION 1)
May 2024 Deviation 2024-O0013 May 2024
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
Jan 2023
252.211-7008 Use of Government-Assigned Serial Numbers. Sep 2010 252.219-7003 Small Business Subcontracting Plan (DoD Contracts). Dec 2019 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.
Jun 2023
252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.
Jan 2023
252.232-7010 Levies on Contract Payments. Dec 2006 252.243-7002 Requests for Equitable Adjustment. Dec 2022 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.244-7001 Contractor Purchasing System Administration. (Alternate I) Jan 2025 Alternate I Jan 2025 252.247-7023 Transportation of Supplies by Sea. Oct 2024
FAR Clauses Incorporated by Full Text
52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.
(DEVIATION 2025-O0003 and 2025-O0004)
(Jan 2025) Deviation 2025-O0004 (Mar 2025)
Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)
(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:
(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, (Jan 2017) of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).
(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)
(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).
(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(Nov 2015)
(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(Mar 2023)
(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(Aug 1996)
(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(Oct 2004)
(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:
[X] 52.203-6, Restrictions on Subcontractor Sales to the Government with (41 U.S.C. 4704 and 10 U.S.C. (1) (Jun 2020), Alternate I (Nov 2021) 4655).
[X] 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (Nov 2021)
[ ] 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-(3) (Jun 2010) 5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)
[ ] 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, (4) (Nov 2023) the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).
[X] 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(5) (Jun 2020)
[ ] [Reserved].(6)
[ ] 52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(7) (Oct 2016)
[ ] 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(8) (Oct 2016)
[X] 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(9) (Jun 2023)
[ ] 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and (10) Multi-Agency Contracts. (Pub. L. 115-390, title II).(Dec 2023)
[ ] (11)
(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)
[ ] Alternate I of 52.204-30.(ii) (Dec 2023)
[X] (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31 U.S.C. 6101 note).Jan
[X] 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).(13) (Oct 2018)
[ ] [Reserved].(14)
[ ] 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(15) Oct 2022
[X] 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the (16) Oct 2022 preference, it shall so indicate in its offer) (15 U.S.C. 657a).
[ ] [Reserved](17)
[ ] (18)
(i) 52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(Nov 2020)
[ ] Alternate I of 52.219-6.(ii) (Mar 2020)
[ ] (19)
(i) 52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(Nov 2020)
[ ] Alternate I of 52.219-7.(ii) (Mar 2020)
[X] 52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).(20) ( )Jan 2025
[X] (21)
(i) 52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)).( )Jan 2025
[ ] Alternate I of 52.219-9.(ii) (Nov 2016)
[X] Alternate II of 52.219-9.(iii) (Nov 2016)
[ ] Alternate III of 52.219-9.(iv) (Jun 2020)
[ ] Alternate IV of 52.219-9.(v) ( )Jan 2025
[ ] (22)
(i) 52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(Mar 2020)
[ ] Alternate I of 52.219-13.(ii) (Mar 2020)
[ ] 52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).(23) Oct 2022
[ ] 52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(24) (Sep 2021)
[ ] 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible (25) Under the SDVOSB Program ( ) (15 U.S.C. 657f).Feb 2024
[X] (26)
(i) 52.219-28, Small Business Program Rerepresentation (15 U.S.C. 632(a)(2)).Postaward ( )Jan 2025
[ ] Alternate I of 52.219-28.(ii) (Mar 2020)
[ ] 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ((27) Oct ) (15 U.S.C. 637(m)).2022
[ ] 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (28) Small Business Program ( ) (15 U.S.C. 637(m)).Oct 2022
[ ] 52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(29) (Mar 2020)
[ ] 52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).(30) (Sep 2021)
[X] 52.222-3, Convict Labor (E.O.11755).(31) (Jun 2003)
[X] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(Jan 2025)
[ ] [Reserved](33)
[ ] [Reserved](34)
[X] (35)
(i) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)
[ ] Alternate I of 52.222-35.(ii) (Jul 2014)
[X] (36)
(i) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(Jun 2020)
[ ] Alternate I of 52.222-36.(ii) (Jul 2014)
[X] 52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(37) Jun 2020
[X] 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(38) (Dec 2010)
[X] (39)
(i) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).(Nov 2021)
[ ] Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (Mar 2015)
[ ] (40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (Jan 2025) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)
[ ] (41)
(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
[ ] Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)(ii) (May 2008)
[ ] 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).(42) (May 2024) et seq.
[ ] 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, ).(43) (May 2024) et seq.
[ ] 52.223-20, Aerosols (42 U.S.C. 7671, ).(44) (May 2024) et seq.
[ ] 52.223-21, Foams (42 U.S.C. 7671, ).(45) (May 2024) et seq.
[ ] 52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, (46) and 42 U.S.C. 7671l).
[ ] (47)
(i) 52.224-3 Privacy Training (5 U.S.C. 552 a).(Jan 2017)
[ ] Alternate I of 52.224-3.(ii) (Jan 2017)
[ ] (48)
(i) 52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(Oct 2022)
[ ] Alternate I of 52.225-1.(ii) (Oct 2022)
[ ] (49)
(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, (NOV 2023) 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.
[ ] Alternate I [Reserved].(ii)
[ ] Alternate II of 52.225-3.(iii) (Jan 2025)
[ ] Alternate III of 52.225-3.(iv) (Feb 2024)
[ ] Alternate IV (Oct 2022) of 52.225-3.(v)
[ ] 52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(50) (NOV 2023) et seq
[X] 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign (51) (Feb 2021) Assets Control of the Department of the Treasury).
[ ] 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National (52) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).
[ ] 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).(53)
[ ] 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.S.C. 5150).(54) (Nov 2007)
[X] 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(55) (May 2024)
[ ] 52.229-12, Tax on Certain Foreign Procurements .(56) (Feb 2021)
[ ] 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. (57) (Nov 2021) 3805).
[ ] 52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(58) (Nov 2021)
[X] 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).(59) (Oct2018)
[ ] 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).(60)
[ ] 52.232-36, Payment by Third Party (31 U.S.C. 3332).(61) (May 2014)
[ ] 52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).(62) (Aug 1996)
[X] (63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)
[ ] 52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).(64) (Jan 2017)
[ ] (65)
(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631).(Nov 2021)
[ ] Alternate I of 52.247-64.(ii) (Apr 2003)
[ ] Alternate II of 52.247-64.(iii) (Nov 2021)
(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:
[ ] 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter67).(1) (Aug 2018)
[ ] 52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. chapter 67).(2) (May 2014)
[ ] 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (3) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).
[ ] 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.(4) C. chapter 67).
[ ] 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of (5) Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).
[ ] 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (6) (May 2014) (41 U.S.C. chapter 67).
[ ] 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(7) (Jan 2022)
[ ] 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(8) (Jan 2022)
[ ] 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).(9)
[ ] 52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (49 U.S.C. 40118(10) (Jan 2025) (g)).
(d) . The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded Comptroller General Examination of Record using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.
(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.
(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.
(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.
(e)
(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-
(i) 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509).(Nov 2021)
(ii) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712).(Nov 2023)
(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).
(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)
(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).
(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(Jun 2023)
(vii)
(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)
(B) Alternate I of 52.204-30.(Dec 2023)
(viii) 52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting ( )Jan 2025 opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.
(ix) [Reserved]
(x) [Reserved]
(xi) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)
(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(Jun 2020)
(xiii) 52.222-37, Employment Reports on Veterans (38 U.S.C. 4212).(Jun 2020)
(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496). Flow down required in (Dec 2010) accordance with paragraph (f) of FAR clause 52.222-40.
(xv) 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter 67).(Aug 2018)
(xvi)
(A) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O 13627).(Nov 2021)
(B) Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(Mar 2015)
(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).
(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).
(xix) 52.222-54, Employment Eligibility Verification (E.O. 12989).(Jan 2025)
(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(Jan 2022)
(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(Jan 2022)
(xxii)
(A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).
(B) Alternate I of 52.224-3.(Jan 2017)
(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Section 862, as amended, of the National (Oct 2016) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).
(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (42 U.S.C. 1792). Flow down required in accordance with (Jun 2020) paragraph (e) of FAR clause 52.226-6.
(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.
(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)
(xxvii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down (Nov 2021) required in accordance with paragraph (d) of FAR clause 52.247-64.
(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.
(End of clause)
52.216-18 Ordering. (Aug 2020)
Ordering (Aug 2020)
(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from through .date of award five (5) years after contract award
(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.
(c) A delivery order or task order is considered "issued" when-
(1) If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail;
(2) If sent by fax, the Government transmits the order to the Contractor's fax number; or
(3) If sent electronically, the Government either-
(i) Posts a copy of the delivery order or task order to a Government document access system, and notice is sent to the Contractor; or
(ii) Distributes the delivery order or task order via email to the Contractor's email address.
(d) Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract.
(End of clause)
52.216-19 Order Limitations. (Oct 1995)
Order Limitations (Oct 1995)
(a) . When the Government requires supplies or services covered by this contract in an amount of less than [insert dollar figure or Minimum order 1 quantity], the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.
(b) . The Contractor is not obligated to honor-Maximum order
(1) Any order for a single item in excess of ;10
(2) Any order for a combination of items in excess of ; or10
(3) A series of orders from the same ordering office within days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) 30 of this section.
(c) If this is a requirements contract ( includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the i.e., Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.
(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within days after issuance, with written notice stating the TBD Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.
(End of clause)
52.216-22 Indefinite Quantity. (Oct 1995)
Indefinite Quantity (Oct 1995)
(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.
(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum."
(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.
(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; , that the Contractor shall not be required to make any deliveries provided under this contract after .five (5) years after contract award date
(End of clause)
52.252-2 Clauses Incorporated by Reference. (Feb 1998)
Clauses Incorporated By Reference (Feb 1998)
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):
FAR: https://www.acquisition.gov DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html
(End of clause)
52.252-6 Authorized Deviations in Clauses. (Nov 2020)
Authorized Deviations in Clauses (Nov 2020)
(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.
(b) The use in this solicitation or contract of any (48 CFR ) clause with an authorized Defense Federal Acquisition Regulation Supplement Chapter 2 deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.
(End of clause)
DFARS Clauses Incorporated by Full Text
252.211-7003 Item Unique Identification and Valuation. (Jan 2023)
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)
(a) . As used in this clause- Definitions
"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.
"Concatenated unique item identifier" means-
(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or
(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.
"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.
"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.
"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html
"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.
" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.
" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.
"Government's unit acquisition cost" means-
(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;
(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and
(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.
"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.
"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.
"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.
" Lot or batch number" means an identifying number assigned by the enterprise…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .