Solicitation.pdf

Document Number: 36C78625Q50249 PROCESSED Page 1 of 66

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24 & 30

1. REQUISITION NUMBER

F3662X1-25-2000002

PAGE 1 OF

5. SOLICITATION NUMBER

36C78625Q50249

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER 6. SOLICITATION ISSUE

DATE

05/01/2025

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME Roberto Escobedo

b. TELEPHONE NUMBER (No collect calls) 8. OFFER DUE DATE / LOCAL

TIME

05/12/2025

01:00 PT

CODE 36C7869. ISSUED BY UNRESTRICTED OR X SET ASIDE: 100.00 % FOR

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

X SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

8(A)

NAICS: 337211

SIZE STANDARD: 1,000 Employees

10. THE ACQUISITION IS

SEE

SCHEDULE

X

11. DELIVERY FOR FOB DESTINATION

UNLESS BLOCK IS MARKED 0 Days: 0.00 %

0 Days: 0.00 % 0 Days: 0.00 % 0 Days: 0.00 %

12. DISCOUNT TERMS

13a. THIS CONTRACT IS

RATED ORDER UNDER DPAS

(15 CFR 700)

13b. RATING

X RFQ IFB RFP

14. METHOD OF SOLICITATION

3662X1CODE15. DELIVER TO

FT SCOTT NATIONAL CEMETARY (893)

DEPT OF VETERANS AFFAIRS (893)

FT SCOTT NATIONAL CEMETARY

900 E. NATIONAL AVE

FORT SCOTT, KS 66701

CODE16. ADMINISTERED BY

FACILITY

CODE

CODE

Telephone No.

17a. CONTRACTOR/

OFFEROR

CODE18a. PAYMENT WILL BE MADE BY

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER SEE ADDENDUM

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS

CHECKED

19. ITEM NO. 20. SCHEDULE OF SUPPLIES/SERVICES

(Use Reverse and/or Attach Additional Sheets as Necessary)

21. QUANTITY 22. UNIT 23. UNIT PRICE 24. AMOUNT

This is a Brand Name or Equal Furniture request for items identified in the

Fort Scott Statement of Need (SON). The contractor must be able to provide all items (or equal), deliver, and install.

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

X 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA X ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

X 28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS

SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT

TO THE TERMS AND CONDITIONS SPECIFIED.

29. AWARD OF CONTRACT: REF. _____________________________ OFFER

DATED _________________ . YOUR OFFER ON SOLICITATION (BLOCK 5)

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN,

IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF THE CONTRACTING OFFICER (TYPE OR PRINT) Brian Trahan

31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 02/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

Document Number: 36C78625Q50249 PROCESSED Page 2 of 66

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: _________________________________

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

PARTIAL FINAL

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

COMPLETE PARTIAL FINAL

36. PAYMENT 37. CHECK NUMBER

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 02/2012) BACK

Document Number: 36C78625Q50249 PROCESSED Page 3 of 66

Table of Contents

Section Description Page Number

1 Continuation Sheet 2 Contract Clauses

52.252-2 Clauses Incorporated by Reference (Feb 1998)

852.201-70 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 2022)

852.219-73 VA NOTICE OF TOTAL SET-ASIDE FOR VERIFIED SERVICE-DISABLED

VETERAN-OWNED SMALL BUSINESSES (NOV 2022)

852.219-76 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING-CERTIFICATE OF

COMPLIANCE FOR SUPPLIES AND PRODUCTS (NOV 2022)

852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV 2018)

52.204-13 System for Award Management Maintenance (Oct 2018) 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services (Nov 2023) 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services (Jan 2025)

852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT 2020)

852.246-71 REJECTED GOODS (OCT 2018)

52.244-6 Subcontracts for Commercial Products and Commercial Services (Jan 2025) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014) 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013)

3 Documents, Exhibits, or Attachments 4 Solicitation Provisions

52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998)

852.233-71 ALTERNATE PROTEST PROCEDURE (OCT 2018)

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services (Sep 2023) 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021) 52.212-3 Offeror Representations and Certifications-Commercial Products and Commercial Services (May 2024) 52.204-26 Covered Telecommunications Equipment or Services-Representation (Oct 2020) 52.204-16 Commercial and Government Entity Code Reporting (Aug 2020) 52.204-29 Federal Acquisition Supply Chain Security Act Orders-Representation and Disclosures (Dec 2023) 52.204-7 System for Award Management (Nov 2024)

852.233-70 PROTEST CONTENT/ALTERNATIVE DISPUTE RESOLUTION (OCT 2018)

52.211-6 Brand Name or Equal (Aug 1999)

Document Number: 36C78625Q50249 PROCESSED Page 4 of 66

Section 1 - Continuation Sheet

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0001 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Bookcase 4 high with 4 open shelves

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0001

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0002 See Description Below

PSC: 7110

OFFICE FURNITURE

2.000000 EA

Description: Laminate Crescent Return with square laminate leg and laminate top with polymer edge

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0002

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0003 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate Credenza, Fixed laminate Mod panel left Box, Box, File Right side open size 78 x 24 laminate top with polymer edge

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0003

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0004 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Hutch 5 high single pier closed laminate left, OH first doors, standard tackboard

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0004

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0005 See Description Below

PSC: 7110

OFFICE FURNITURE

4.000000 EA

Document Number: 36C78625Q50249 PROCESSED Page 5 of 66

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

Description: Wire Management Trough, 72” Cut on site to accommodate required length.

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0005

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0006 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Conference Table, Rectangular Square Corners -5161, 84x36, Oak Cherry Maple Laminate, Standard Laminate: Dune

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0006

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0007 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Conference table legs, 21"x3", 25"H, Oak Cherry Maple Laminate Palette Laminate Standard Laminate: Dune, Base Plate - Gloss Aluminum

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0007

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0008 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Wardrobe, 5 HI, 5 Clsd Lt, Wardrobe Rt, 36Wx24Dx69H

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0008

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0009 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Chit Chat, Round Table, (1) Disc Base, Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0009

0010 See Description Below 1.000000 EA

Document Number: 36C78625Q50249 PROCESSED Page 6 of 66

PSC: 7110

OFFICE FURNITURE

Description: Standard laminate, Desk rectangular Top

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0010

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0011 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Linking Unit Top, Fixed Lam Mod Panel, 48x24, Laminate Top/Polymer Edge, Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0011

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0012 See Description Below

PSC: 7110

OFFICE FURNITURE

2.000000 EA

Description: Laminate, Credenza, Fixed Lam Mod Panel, Lt-Open, Rt-FF,72x24, Laminate Top/Polymer Edge, Satin Metallic No Cutout in Modesty Panel

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0012

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0013 See Description Below

PSC: 7110

OFFICE FURNITURE

2.000000 EA

Description: Laminate, Pedestal for shells, unfinished back and top, BBF, 16x18, Same Laminate - No Dual

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0013

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0014 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Hutch, 5 HI, Single Pier Clsd LamRt, OH Frst Doors, 72Wx16D, Same Laminate - No Dual

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0014

Document Number: 36C78625Q50249 PROCESSED Page 7 of 66

0015 See Description Below

PSC: 7110

OFFICE FURNITURE

2.000000 EA

Description: Laminate, Credenza Shell, Fixed Mod Panel, 78x24, Laminate Top/Polymer Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0015

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0017 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Credenza, Full Face, Lateral File/Bookcase, 72x24, Laminate Top/Polymer Edge

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0017

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0018 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Printer Stand,36Wx24D, Ref.: Q25980M, Line 2, Laminate Top/Polymer Edge, Standard Laminate:

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0018

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0019 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Credenza, Fixed Lam Mod Panel, Lt-Open, Rt-FF,72x24, Laminate Top/Polymer Edge, Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0019

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0021 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Hutch, 5 HI, Single Pier Clsd LamRt, OH Frst Doors, 72Wx16D, Same Laminate - No Dual, Document Number: 36C78625Q50249 PROCESSED Page 8 of 66

Reference Line: F3662X1-25-2000002 - 0021

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0022 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Crescent Return, Square Lam Leg, Lt, 60x30, Laminate Top/Polymer Edge, Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0022

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0023 See Description Below

PSC: 7110

OFFICE FURNITURE

10.000000 EA

Description: Guest Chair 21 Seat Width, Open Arm, Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0023

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0024 See Description Below

PSC: 7110

OFFICE FURNITURE

4.000000 EA

Description: Guest Chair 24 Seat Width, Open Arm, Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0024

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0025 See Description Below

PSC: 7110

OFFICE FURNITURE

2.000000 EA

Description: Lounge chair, COM/Grade 1 upholstery, METAL LEGS: Standard

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0025

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0026 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Document Number: 36C78625Q50249 PROCESSED Page 9 of 66

Description: Freestanding Square Table 18x18, Corian Solid Surface, TABLETOP: Solid Surface Standard

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0026

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0027 See Description Below

PSC: 7110

OFFICE FURNITURE

4.000000 EA

Description: 69"h Locker Right- Wardrobe

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0027

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0028 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: 69"h Modular Top & Common Back - Single Depth Locker- 18.75d x 48.125w x 69h

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0028

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0029 See Description Below

PSC: 7110

OFFICE FURNITURE

4.000000 EA

Description: Locker Number Plate- 0.0625d x 1w x 1h, Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0029

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0030 See Description Below

PSC: 7110

OFFICE FURNITURE

3.000000 EA

Description: 3 Shelf Starter Ribbed Steel Shelving 10,000 Lb Capacity, 60" Wide x 72" High x 24"

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0030

0031 See Description Below 4.000000 EA

Document Number: 36C78625Q50249 PROCESSED Page 10 of 66

PSC: 7110

OFFICE FURNITURE

Description: Work Chair,New Aeron,B Size,Std-Hgt Range Adj,Tlt Lim and Seat Angle, Fully Adj Arms, Non-Uphst Armpads, Back Support

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0031

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0032 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Installation of Furniture in accordance with the Statement of Need.

Period of Performance: 06/02/2025 - 07/31/2025

Reference Line: F3662X1-25-2000002 - 0032

Number Supplies or Services Qty Unit Unit Price Total (Inc. disc., tax, and fees)

0033 See Description Below

PSC: 7110

OFFICE FURNITURE

1.000000 EA

Description: Laminate, Hutch, 6 HI, Single Pier Clsd LamRt, OH Frst Doors, 72Wx16D, Same Laminate - No Dual, Reference Line: F3662X1-25-2000002 - 0033

Document Number: 36C78625Q50249 PROCESSED Page 11 of 66

STATEMENT OF NEED

Brand Name or Equal Furniture

Fort Scott National Cemetery

900 East National Ave

Fort Scott, Kansas

66701

1. STATEMENT OF SERVICES:

a) This project involves providing furniture and ancillary furniture items to the Fort Scott National Cemetery. The contractor shall procure all identified items in the SON, deliver, and install all new desk systems, tables, seating

(waiting, desk chairs, side chairs to include bariatric), wardrobe lockers, and supporting filing and storage cabinets to ensure veteran and administrative safety and a healthy work environment. The furniture is to be used for veterans and administrative usage in the Administrative Lodge Building. This is an area that serves our vets in support of the National Cemetery Administration, Fort Scott National Cemetery.

b) The contractor shall be responsible for supplying all supervision, labor, materials, equipment, tools, insurance, permits, licenses, transportation, drayage, all other aspects of material handling, safety control, and regulation compliance to provide the required furniture, as outlined below in this SON.

c) All pieces of furniture shall be new, free from defects affecting safety, appearance, durability, and serviceability and in conformance with the specifications. All items shall be first quality goods. All exposed wood surfaces shall be free of splices, loose knots, torn grains, checks, or defects of any kind. Adjacent parts in any piece of furniture shall be closely matched in wood species, color, and grain pattern.

2. GENERAL REQUIREMENTS

a) The contractor will provide all the listed items below, deliver, and install furniture to Fort Scott National Cemetery.

b) The contractor shall provide commercial furniture.

c) The contractor employees shall behave with appropriate decorum, courtesy, and respect while within the cemetery or at its perimeter or entrances. (See Attachment A, Dignity Clause)

d) All personnel delivering material must be trained in NCA rules of behavior and aware of their surroundings at all times to prevent any damages to Government property.

e) Any material that does not meet the minimum technical requirements will not be accepted.

2.1 SCHEDULING DELIVERING

a) The contractor shall coordinate the delivery of all items with the Fort Scott National Cemetery COR at least fourteen (14) business days prior to the start of work/shipping.

2.2 INSTALLATION

a) Contractor shall coordinate with the cemetery Contracting Officer Representative (COR) prior to delivering items.

b) Installation shall be during the hours of 7:30 am- 4:00pm, Monday thru Friday. (adjusted/modified as needed, approved by COR)

c) All items shall be installed by certified installers in accordance with manufacture’s recommended installation instructions.

d) Workstation components shall be installed level, plumb, square, and with proper alignment with adjoining furniture.

e) The components shall be securely interconnected and securely attached to the building where required.

f) A punch list walk through shall be performed with the contractor’s representative. Items on the punch list shall be noted and a response for completion time (expected date of completion) of each item shall be provided from the contractor.

g) The contractor is responsible for the storage of products and contractor’s material/equipment during the installation.

The contractor must request prior approval of storage by the COR. The Government is not responsible for the contractor equipment/materials.

h) The contractor must avoid any damages to the Governments building and must protect doors, doorways, and corridor walls while the delivery and installation.

i) Contractor is responsible for any damage caused by the contractor and must repair identified area at no cost to the

Government.

j) Contractor must be able to complete each room and demobilize according to these expected and approximate timeframes. Contractor must supply a detailed staffing and project schedule for each phase of this project.

2.3 CLEANING

a) The contractor shall remove all packaging material and debris from the site and properly disposed of. Packing materials will not be stored in the building for any period exceeding 24 hours.

Document Number: 36C78625Q50249 PROCESSED Page 12 of 66

b) Recyclable cardboard products shall be disposed of in accordance with applicable statutes, in respective containers.

The contractor is responsible for providing trash containers at an offsite facility.

c) Personal trash (food wrappers, drink container, etc..) shall be removed from the site daily by the contractor.

d) Upon completion of installation prior to the punch list walk through, all products shall be cleaned and dusted, and the area shall be left in a clean condition and ready for occupancy.

e) Any defects in material from installation shall be repaired and damaged products that cannot be satisfactory repaired shall be replaced.

f) Final acceptance by the Government will not occur until all installed items have been wiped cleaned and debris/dust connected with installation is removed from the NCA site.

2.4 DELIVERY, STORAGE, AND HANDLING

a) The delivery of furniture shall be within 60 days after of award of contract.

b) All products shall be delivered to the jobsite. In the event there is a delay in delivery, contractor must notify the

COR immediately in writing via email and follow up with a telephone call.

c) Contractor shall provide the COR with schedule date and time of delivery truck at least twenty-four (24) hours minimum in advance.

d) Contractor must ensure that the delivery driver has copies of the Bill of Materials/Delivery Orders and shall not attempt to deliver any items before the scheduled delivery date.

e) Storage of the products to the installation is contractor’s responsibility. There shall not be a staging are provided at the project site. Product is manufacture’s responsibility until the Fort Scott Cemetery COR accepts complete installation.

2.5 PROTECTION OF PROPERTY

a) The Contractor shall perform an inspection of the buildings and grounds with the COR prior to commencing work.

Contractor shall protect all items from damage. The contractor shall take precaution against damage to the buildings, grounds and furnishings. The contractor shall repair or replace any items related to buildings or grounds damaged accidentally, or on purpose due to actions by the contractor, utilizing materials of the same quality, size, grade and color, to match existing work.

b) To ensure that the contractor shall be able to repair or replace any items, components, on the buildings or grounds damaged due to negligence and/or actions taken by the contractor. The contractor shall communicate with the COR to resolve all repairs beyond simple surface cleaning. Concurrence of the COR is required before the contractor may perform any significant repair work. In all cases, repairs shall utilize materials of the same quality, size, texture, grade and color to match adjacent existing work.

c) The contractor shall be responsible for the security of the areas in which the work is being performed at all times prior to completion. The contractor shall maintain accountability and control of any keys provided and shall return them to the COR upon completion of the work.

d) Contractor shall provide floor protection while working in all NCA facilities. All material handling equipment shall have rubber wheels.

2.6 RECEIVE AND UNLOAD

a) The contractor shall verify and inspect all delivered items. All deficiencies (damage/overage/shortages) shall be brought to the attention of the Contracting Officer and cemetery COR in writing, via email, immediately upon identification.

b) The contractor shall maintain a complete file of all documents relating to each discrepancy and copies of all discrepancy report shall be forwarded to the COR daily.

c) The contractor shall store damaged items in the location designated by the COR.

d) Contractor shall repair or coordinate with the COR for replacement of damaged, defective, or missing items.

e) If the contractor is unable to complete the assembly and placement of all unloaded items before the end of workday, the contractor will be responsible for moving these items to a secure location, until the next available workday.

f) The contractor will be responsible for moving the items from the overnight storage site to its designated position in the building.

3. GENERAL PRODUCT REQUIREMENTS

a) All finished surfaces shall be free of scratches, mars, dents, or blemishes, and withstand staining, and exhibit to flaking, cracking, or loss or adhesion.

b) Furnishings shall have smooth finishes with no hazardous projections, sharp comers, or detail, which can be hazardous and cause personal injury or damage to clothing.

c) All products and components will be new; refurbished products will not be accepted.

d) Substitutions of the finishes shown/identified in the General Requirements section shall not be accepted.

Document Number: 36C78625Q50249 PROCESSED Page 13 of 66

e) Pricing shall include these exact finishes and colors or as chosen by the CO/COR.

f) All contracted personnel must always have identification on them while on site.

g) It is the responsibility of the vendor confirm correct quantities prior to order.

h) All finishes to be confirmed prior to manufacturing/delivery by CO/COR.

3.1 BASIS OF DESIGN: Manufacturer/Product/Finishes Krug Brand Name or Equal under SIN 33721 for the following items:

PART # DESCRIPTION QTY

72BC301655 Artemis Bookcase 4 high with 4 open shelves size 30W x

16D x 55H, finish standard laminate color Dune with radius edge. Rm102 1 72RHC6030RS6 Artemis Laminate Crescent Return, Rt, with square laminate leg 60 x 30 laminate top with polymer edge standard laminate color Dune, radius edge, 60mm round grommet color satin metallic. Rm102,204 2 72C78244XLFRO Artemis Laminate Credenza, Fixed laminate Mod panel left

Box, Box, File Right side open size 78 x 24 laminate top with polymer edge, standard laminate color Dune, Edge profile radius, Pull style: Sono pulls finish silver metallic, 60 mm.

Dia. Round Grommets location TBD, no cutout in modesty panel. Rm102 1

72HTPR781640L110HXRO

Artemis Laminate, Hutch 5 high single pier closed laminate Lt, OH first doors 78W x 16D standard laminate color Dune edge profile radius, grade 2 fabric TBD, standard tackboard. Rm102 1

72WM72

Wire Management Trough, 72” Cut on site to accommodate required length.Rm102,107,204,205 4 51018436

Nuvo, 1pc, Rectangular Square Corners -5161, 84x36, Oak

Cherry Maple Laminate, Standard Laminate: Dune Rm105 1 513921325

Nuvo, 2 pc. Panel Base, 21"x3", 25"H, Oak Cherry Maple

Laminate Palette Laminate Standard Laminate: Dune, Base

Plate - Gloss Aluminum Rm105 2 72WR36246901 Artemis Laminate, Wardrobe, 5 HI, 5 Clsd Lt, Wardrobe Rt, 36Wx24Dx69H Same Laminate - No Dual, Standard

Laminate: Dune, Edge Profile: Radius Edge, No selection of

Lock Option Rm107 1

72053629DB

Chit Chat, Round Table, (1) Disc Base, 36"D LPL PVC Edge, Standard Laminate: Dune, Edge Profile: Radius Edge Base

Finish: Brushed Stainless Rm107 1 72D72304L0RF Standard laminate, Desk rectangular Top, Lam ModPnl Lt-

Open, Rt-BBF, 72x30 Laminate Top/Polymer Edge, Standard

Laminate: Dune, Edge Proflie; Radius Edge, Pull Style: Sono

Pulls, Pull Finish: Silver Metallic, one 60mm Dia. Round

Grommet Std, Satin Metallic, Std Grommet Location- TBD.

Rm107 1 72LU4824HX46 Linking Unit Top, Fixed Lam Mod Panel, 48x24, Laminate

Top/Polymer Edge, Standard Laminate: Dune, Edge Profile:

Radius Edge, No Dual. One 60 mm Dia. Round Grommet

Std, Std Grommet Location, Satin Metallic No Cutout in

Modesty Panel. Rm107 1 72C72244XLDR0 Artemis Laminate, Credenza, Fixed Lam Mod Panel, Lt-

FF,Rt-Open,72x24, Laminate Top/Polymer Edge, Standard

Laminate: Dune Edge Profile: Radius Edge, Same Laminate -

No Dual, Pull Style: Sono Pulls, Pull Finish: Silver Metallic

One 60mm Dia. Round Grommet Std. Location, Std.

Grommet Location – TBD, Satin Metallic No Cutout in

Modesty Panel Rm107.204 2 72P16184F Artemis Laminate, Pedestal for shells, unfinished back and top, BBF, 16x18, Same Laminate - No Dual, Standard

Laminate: Dune, Edge Profile: Radius Edge, Pull Style: Sono

Pulls, Pull Finish: Silver Metallic Rm204,205 2

Document Number: 36C78625Q50249 PROCESSED Page 14 of 66

72HTPR721653L11OHXR0 Artemis Laminate, Hutch, 6 HI, Single Pier Clsd Lam,Lt, OH

Frst Doors, 72Wx16D, Same Laminate - No Dual, Standard

Laminate: Dune,Edge Profile: Radius Edge, Grade 2 Fabric, Fabric Selection Standard Tackboard TBD Rm107 1

72SC7824X46

Artemis Laminate, Credenza Shell, Fixed Mod Panel, 78x24, Laminate Top/Polymer Edge, Standard Laminate: Dune, Edge

Profile: Radius Edge, Same Laminate - No Dual, One 60mm

Dia. Round Grommet Std. Location, Std. Grommet Location

– TBD, Satin Metallic Rm204,205 2 72HTPR721640L11OHXR0 Artemis Laminate, Hutch, 5 HI, Single Pier Clsd Lam

Lt, OH Frst Doors, 72Wx16D Same Laminate - No Dual, Krug Standard Laminate: Dune, Edge Profile: Radius Edge, Grade 2 Fabric, Contact Customer Service for Fabric Selection, Standard Tackboard Rm204 1

72C7224LFRB

Artemis Laminate, Credenza, Full Face, Lateral

File/Bookcase, 72x24, Laminate Top/Polymer Edge, Standard

Laminate: Dune, Edge Profile: Radius Edge, Same Laminate -

No Dual, Pull Style: Sono Pulls, Pull Finish: Silver Metallic, One 60mm Dia. Round Grommet Std. Location, Std. Rm204 1

72PT3624

Artemis Laminate, Printer Stand,36Wx24D, Ref.: Q25980M, Line 2, Laminate Top/Polymer Edge, Standard Laminate:

Dune, Edge Profile: Radius Edge, Same Laminate – No Dual, Stationary with Glides Rm205 1

72C72244XL0RD

Artemis Laminate, Credenza, Fixed Lam Mod Panel, Lt-

Open, Rt-FF,72x24, Laminate Top/Polymer Edge, Standard

Laminate: Dune, Edge Profile: Radius Edge, Same Laminate -

No Dual, Pull Style: Sono Pulls, Pull Finish: Silver Metallic, One 60mm Dia. Round Grommet Std. Location, Std.

Grommet Location – TBD, Satin Metallic No Cutout in

Modesty Panel Rm205 1

72HTPR721640L0OHXR11

Artemis Laminate, Hutch, 5 HI, Single Pier Clsd Lam Lt, OH

Frst Doors, 72Wx16D, Same Laminate - No Dual, Standard

Laminate: Dune, Edge Profile: Radius Edge, Grade 2 Fabric

Tan, Standard Tackboard Rm205 1

72RHC6030LS6

Artemis Laminate, Crescent Return, Square Lam Leg, Lt, 60x30, Laminate Top/Polymer Edge, Standard Laminate:

Dune, Edge Profile: Radius Edge, Same Laminate - No Dual, AR - 60mm Dia. Round Grommet, Satin Metallic Rm205 1

3.2 Manufacturer/Product/Finishes Herman Miller Brand Name or Equal under 33721 for the following item:

AER1B23DW--ALP-G1-

G1-G1-C7-BK-231-03

Work Chair, New Aeron, B Size, Std-Hgt Range Adj,Tlt Lim and

Seat Angle, Fully Adj Arms, Non-Uphst Armpads, Back Support

Option: ALP:+adjustable posture fit SL, Frame

Finish:G1:+graphite, Chassis Finish:G1:+graphite, Base

Finish:G1:+graphite, Casters/Glides:C7:+2 1/2" caster, black yoke, hard floors or carpet, Arm pad Finish: BK:+black, 8Z

Pellicle:231:+8Z Pellicle-Pr Cat 1, Colors:03:+8Z Pellicle graphite

Document Number: 36C78625Q50249 PROCESSED Page 15 of 66

3.3 Manufacturer/Product/Finishes Jensen Brand Name or Equal under SIN 33721 for the following items:

JEC121-OA

Guest Chair 21 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME FINISH: Standard – Metallic Beige, BACK FABRIC: C.F.

Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F.

Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X 24.25W

(IN) 10

JEC124-OA

Guest Chair 24 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME FINISH: Standard – Metallic Beige, BACK FABRIC: C.F.

Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F.

Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X 27.0W

(IN) 4

3.4 Manufacturer/Product/Finishes Avalon Brand Name or Equal under SIN 33721 for the following items:

AVL121F

Lounge chair, COM/Grade 1 upholstery, METAL LEGS: Standard

– Hardrock Maple, BACK FABRIC: Momentum Group Beeline

EPU, color OAT, SEAT FABRIC: Momentum Group Beeline EPU, color OAT, ARM PANEL FABRIC: Momentum Group Beeline

EPU, color OAT, KICK PANEL FABRIC: Momentum Group

Beeline EPU, color OAT, +\-5% 31.0L X 28.0W (IN) 2

3.5 Manufacturer/Product/Finishes Spry Brand Name or Equal under SIN 33721 for the following items:

SPT181816-S

Freestanding Square Table 18x18, Corian Solid Surface, TABLETOP: Solid Surface Standard – Canyon, FRAME FINISH:

Standard – Metallic Beige 1

3.6 Manufacturer/Product/Finishes Flux Brand Name or Equal under SIN 33721 for the following items:

FLT1812-69FLK-HDR

69"h Locker Right- Wardrobe- 18d x 12w x 69h, P022 Ledge Pull, KL Key Lock, Finishes TBD 4

FLT1948-69LKMTB

69"h Modular Top & Common Back - Single Depth Locker- 18.75d x 48.125w x 69h, Finishes TBD 1

FLB-NUMPLT Locker Number Plate- 0.0625d x 1w x 1h, Finishes TBD 4

3.7 Manufacturer/Product/Finishes Lyons Brand Name or Equal under SIN 33721 for the following item:

DD67211SR

3 Shelf Starter Ribbed Steel Shelving 10,000 Lb Capacity, 60" Wide x 72" High x 24" Deep, Dove Gray 3

Document Number: 36C78625Q50249 PROCESSED Page 16 of 66

3.8 Manufacturer/Product Fabric Specifications for seating:

Didi DID 62 Putty Performance

Abrasion: Exceeds 250,000 double rubs

Flammability: This textile meets all appropriate flammability requirements for seating. NFPA 260 & UFAC Characteristics

Content: Polyurethane made with Polycarbonate resins Finish: Advanced Soil & Stain Protection + Ink Resistance Backing:

Polyester

Width: 54" (137cm)

Repeat: Suitable for non-match application Bolt Size: 30 yards (27 m)

Weight: 22.0 oz/lin.yd

Maintenance: W/B-Clean with water-based cleanser or diluted household bleach. Lightfastness: 1,000+ hours

Beeline EPU - Oat Performance

Product Number: 09152878 Abrasion: 900,000 double rubs

Flammability: This textile meets all appropriate flammability requirements for seating. See flame certificate for test results.

Lightfastness: 1,000+ hours Characteristics

Content: 100% EPU Polyurethane Finish: Green Guard Certified, PVC Free Backing: Polyester

Width: 54" (137cm)

Bolt Size: 30 yards (27 m)

Weight: 1.57 lb.

Maintenance: W/B-Clean with water-based cleanser or diluted household bleach.

3.9 WARRANTY ITEMS: Warranty information provided needs to indicate the length, what is covered, and the usage that warranty covers. The warranty must meet or exceed the following criteria:

a) Industry standard minimum of 10+ years.

b) Includes all components and moving mechanisms.

c) Warranty work performed on location at manufacturer’s expense.

d) Warranties shall be signed by the authorized representative of the contractor. Warranties accompanied by document authenticating the signer as an authorized representative of the guarantor, shall be presented to the owner upon the completion of the project.

e) The vendor shall guarantee that the products are free from any defects in workmanship from the date of delivery/installation.

f) The warranty of items will begin on the date of acceptance of products/services by the Government COR.

g) The contractor agrees to furnish, without cost to the Government, replacement of all parts and material which are found to be defective during the warranty period. The cost of installation and travel of replacement material and parts shall be borne by the contractor.

Document Number: 36C78625Q50249 PROCESSED Page 17 of 66

ATTACHMENT - A – DIGNITY CLAUSE

DIGNITY CLAUSE

Respect for Headstones and Markers in National Cemeteries; Handling of Markers and Headstones

1. Every action by contractor personnel at a national cemetery must be performed with the special care, reverence, dignity, and respect that acknowledges the cemetery as the final resting place that commemorates the service and sacrifice that service members, Veterans and their families made for our Nation. Critically important is the awareness required of the Contractor employees of the remains buried in the grounds where the work is performed. The utmost care must be given to these remains and the headstones and flat grave markers that mark those gravesites and memorialize the service of individuals.

a. Contractors cannot walk, stand, lean, sit or jump on headstones or markers. Nor can they drive over them.

b. No tools, equipment or other items will be placed or leaned on headstones or markers.

c. Use care not to scratch or damage markers in any manner.

d. Contractor shall be responsible for replacing damaged headstones and markers and for restoring turf damaged during performance of this work.

e. Additionally, should any activity result in the exposure and/or damage to any remains, container for remains

(e.g., casket or urn), or outer burial container, the contractor must contact the COR, Director/Assistant

Director, or Contracting Officer (CO) for guidance.

2. Any doubts as to proper procedures shall be brought to the attention of the COR, Director/Assistant Director, or CO for guidance or resolution.

3. The contractor is required to discuss the guidance with employees and/or subcontractors and have each employee sign a statement of compliance and deliver the signed statement to the COR before work may begin.

(END)

Document Number: 36C78625Q50249 PROCESSED Page 18 of 66

ATTACHMENT B- ROOM BY ROOM REQUIREMENTS

*Product Specifications: Minimum Technical Requirements (MTR), See Attachment with highlighted "Minimum

Technical Requirements for Furniture."

ROOM BY ROOM REQUIREMENTS: Refer to attached furniture layout drawings for quantities and sizes:

1. Room 102/Office 1: MTR Code- CR1, MD3, TS4, GC1, GC2, LF2, GR

Quantity of- 1 for Part # 72BC301655: Artemis Bookcase 4 high with 4 open shelves size 30W x 16D x 55H finish standard laminate color Dune with radius edge.

Quantity of- 1 for Part # 72RHC6030RS6: Artemis Laminate Crescent Return with square laminate leg 60 x 30 laminate top with polymer edge standard laminate color Dune, radius edge, 60mm round grommet color satin metallic.

Quantity of- 1 for Part # 72C78244XLFRPO: Artemis Laminate Credenza, Fixed laminate Mod panel left Box, Box, File Right side open size 78 x 24 laminate top with polymer edge, standard laminate color Dune, Edge profile radius, Pull style: Sono pulls finish silver metallic, 60 mm. Dia. Round Grommets location TBD, no cutout in modesty panel.

Quantity of- 1 for Part # 72HTPR781640L110HXRO: Artemis Laminate, Hutch 5 high single pier closed laminate left, OH first doors 78W x 16D standard laminate color Dune edge profile radius, grade 2 fabric Tan, standard tackboard.

Quantity of- 1 for Part # 72WM72: Wire Management Trough, 72” Cut on site to accommodate required length.

Quantity of- 1 for Part # AER1B23DW--ALP-G1-G1-G1-C7-BK-231-03- Work Chair,New Aeron,B Size,Std-Hgt

Range Adj,Tlt Lim and Seat Angle, Fully Adj Arms, Non-Uphst Armpads, Back Support Option:ALP:+adjustable posturefit SL,Frame Finish:G1:+graphite, Chassis Finish:G1:+graphite, Base Finish:G1:+graphite, Casters/Glides:C7:+2

1/2" caster, black yoke, hard floors or carpet, Armpad Finish: BK:+black, 8Z Pellicle:231:+8Z Pellicle-Pr Cat 1, Colors:03:+8Z Pellicle graphite

Quantity of- 1 for Part # Part # JEC121-OA - Guest Chair 21 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X

24.25W (IN)

Quantity of- 1 for Part # JEC124-OA - Guest Chair 24 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X

27.0W (IN)

2. Room 105/Office 2: MTR Code- CT2, GC1

a) Quantity of- 1 for Part # 51018436 - Nuvo, 1pc, Rectangular Square Corners -5161, 84x36, Oak Cherry Maple Laminate, Standard Laminate: Dune

b) Quantity of- 2 for Part # 513921325 - Nuvo, 2 pc. Panel Base, 21"x3", 25"H, Oak Cherry Maple Laminate Palette

Laminate, Standard Laminate: Dune, Base Plate - Gloss Aluminum

c) Quantity of- 6 for Part # JEC121-OA - Guest Chair 21 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X

24.25W (IN)

3. Room 107/Office 3: MTR Code- OT1, MD3, MD2, TS4, GC1, GC2, LK2

a) Quantity of- 1 for Part # 72WR36246901 - Artemis Laminate, Wardrobe, 5 HI, 5 Clsd Lt, Wardrobe Rt, 36Wx24Dx69H, Same Laminate - No Dual, Standard Laminate: Dune, Edge Profile: Radius Edge. Lock Option TBD

b) Quantity of- 1 for Part # 72053629DB - Chit Chat, Round Table, (1) Disc Base, 36"D LPL PVC Edge, Standard

Laminate: Dune, Edge Profile: Radius Edge Base Finish: Brushed Stainless

c) Quantity of- 1 for Part # 72D72304L0RF - Standard laminate, Desk rectangular Top, Lam ModPnl Lt- Open, Rt-BBF, 72x30 Laminate Top/Polymer Edge, Standard Laminate: Dune, Edge Proflie; Radius Edge, Pull Style: Sono Pulls, Pull

Finish: Silver Metallic, one 60mm Dia. Round Grommet Std, Satin Metallic, Std Grommet Location- TBD.

Document Number: 36C78625Q50249 PROCESSED Page 19 of 66

d) Quantity of- 1 for Part # 72LU4824HX46 - Linking Unit Top, Fixed Lam Mod Panel, 48x24, Laminate Top/Polymer

Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, No Dual. One 60 mm Dia. Round Grommet Std, Std

Grommet Location, Satin Metallic No Cutout in Modesty Panel.

e) Quantity of- 1 for Part # 72WM72 - Wire Management Trough, 72” Cut on site to accommodate required length.

f) Quantity of- 1 for Part # AER1B23DW--ALP-G1-G1-G1-C7-BK-231-03- Work Chair,New Aeron,B Size,Std-Hgt

Range Adj,Tlt Lim and Seat Angle, Fully Adj Arms, Non-Uphst Armpads, Back Support Option:ALP:+adjustable posturefit SL,Frame Finish:G1:+graphite, Chassis Finish:G1:+graphite, Base Finish:G1:+graphite, Casters/Glides:C7:+2

1/2" caster, black yoke, hard floors or carpet, Armpad Finish: BK:+black, 8Z Pellicle:231:+8Z Pellicle-Pr Cat 1, Colors:03:+8Z Pellicle graphite

g) Quantity of- 1 for Part # JEC121-OA - Guest Chair 21 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X 24.25W

(IN)

h) Quantity of- 1 for Part # JEC124-OA - Guest Chair 24 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X 27.0W

(IN)

4. Room 201/Office/Changing Area: MTR Code- - GC3, OT1, LK2, MSF1

a) Quantity of- 2 for Part # AVL121F- Executive Lounge chair, COM/Grade 1 upholstery, METAL LEGS: Standard –

Hardrock Maple, BACK FABRIC: Momentum Group Beeline EPU, color OAT, SEAT FABRIC: Momentum Group

Beeline EPU, color OAT, ARM PANEL FABRIC: Momentum Group Beeline EPU, color OAT, KICK PANEL

FABRIC: Momentum Group Beeline EPU, color OAT, +\-5% 31.0L X 28.0W (IN)

b) Quantity of- 1 for Part # SPT181816-S- Freestanding Square Table 18x18, Corian Solid Surface, TABLETOP: Solid

Surface Standard – Canyon, FRAME FINISH: Standard – Metallic Beige

c) Quantity of- 4 for Part # FLT1812-69FLK-HDR - 69"h Locker Right- Wardrobe- 18d x 12w x 69h, Chassis Laminate:

Oatmeal Cookie, Metal Finish: Soft Nickel Laminate: Oatmeal Cookie, Ledge Pull P022, Key Lock

d) Quantity of- 1 for Part # FLT1948-69LKMTB - 69"h Modular Top & Common Back - Single Depth Locker- 18.75d x

48.125w x 69h Laminate: Oatmeal Cookie

e) Quantity of- 4 for Part # FLB-NUMPLT- Locker Number Plate- 0.0625d x 1w x 1h, Metal Finish: Black/Brass

5. Room 204/Office 6: MTR Code- CR2, MD3, MD2, MSF1, LF2, GR, TS4, GC1, GC2

a) Quantity of- 1 for Part # 72C72244XLDR0 - Artemis Laminate, Credenza, Fixed Lam Mod Panel, Lt-FF,Rt-Open,72x24, Laminate Top/Polymer Edge, Standard Laminate: Dune Edge Profile: Radius Edge, Same Laminate - No Dual, Pull

Style: Sono Pulls, Pull Finish: Silver Metallic One 60mm Dia. Round Grommet Std. Location, Std. Grommet Location –

TBD, Satin Metallic No Cutout in Modesty Panel

b) Quantity of- 1 for Part # 72WM72 - Wire Management Trough, 72” Cut on site to accommodate required length.

c) Quantity of- 1 for Part # 72P16184F - Artemis Laminate, Pedestal for shells, unfinished back and top, BBF, 16x18, Same

Laminate - No Dual, Standard Laminate: Dune, Edge Profile: Radius Edge, Pull Style: Sono Pulls, Pull Finish: Silver

Metallic

d) Quantity of- 1 for Part # 72HTPR721640L11OHXR0 - Artemis Laminate, Hutch, 5 HI, Single Pier Clsd Lam,Lt, OH

Frst Doors, 72Wx16D, Same Laminate - No Dual, Standard Laminate: Dune,Edge Profile: Radius Edge, Grade 2 Fabric, Fabric Selection Standard Tackboard TBD

e) Quantity of- 1 for Part # 72SC7824X46 - Artemis Laminate, Credenza Shell, Fixed Mod Panel, 78x24, Laminate

Top/Polymer Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, Same Laminate - No Dual, One 60mm Dia.

Round Grommet Std. Location, Std. Grommet Location – TBD, Satin Metallic

f) Quantity of- 1 for Part # 72RHC6030RS6 - Artemis Laminate, Crescent Return, Square Lam Leg, Rt, 60x30, Laminate

Top/Polymer Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, Same Laminate - No Dual, AR- 60mm Dia.

Round Grommet, Satin Metallic

g) Quantity of- 1 for 72C7224LFRB- Artemis Laminate, Credenza, Full Face, Lateral File/Bookcase, 72x24, Laminate

Top/Polymer Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, Same Laminate - No Dual, Pull Style: Sono

Document Number: 36C78625Q50249 PROCESSED Page 20 of 66

Pulls, Pull Finish: Silver Metallic, One 60mm Dia. Round Grommet Std. Location, Std. Grommet Location – TBD, Satin

Metallic

h) Quantity of- 1 for Part # AER1B23DW--ALP-G1-G1-G1-C7-BK-231-03- Work Chair,New Aeron,B Size,Std-Hgt

Range Adj,Tlt Lim and Seat Angle, Fully Adj Arms, Non-Uphst Armpads, Back Support Option:ALP:+adjustable posturefit SL,Frame Finish:G1:+graphite, Chassis Finish:G1:+graphite, Base Finish:G1:+graphite, Casters/Glides:C7:+2

1/2" caster, black yoke, hard floors or carpet, Armpad Finish: BK:+black, 8Z Pellicle:231:+8Z Pellicle-Pr Cat 1, Colors:03:+8Z Pellicle graphite

i) Quantity of- 1 for Part # JEC121-OA - Guest Chair 21 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5%26.5L X

24.25W (IN)

j) Quantity of- 1 for Part # JEC124-OA - Guest Chair 24 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X

6. Room 205/Office 5: MTR Code – MD3, CR2, MSS2, MSS1, MSF1, TS4, GC1, GC2

a) Quantity of- 1 for Part # 72PT3624 - Artemis Laminate, Printer Stand,36Wx24D, Ref.: Q25980M, Line 2, LaminateTop/Polymer Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, Same Laminate – No Dual, Stationary with Glides

b) Quantity of- 1 for Part # 72WM72 - Wire Management Trough, 72” Cut on site to accommodate required length.

c) Quantity of- 1 for Part # 72C72244XL0RD - Artemis Laminate, Credenza, Fixed Lam Mod Panel, Lt-Open, Rt-

FF,72x24, Laminate Top/Polymer Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, Same Laminate - No

Dual, Pull Style: Sono Pulls, Pull Finish: Silver Metallic, One 60mm Dia. Round Grommet Std. Location, Std. Grommet

Location – TBD, Satin Metallic No Cutout in Modesty Panel

d) Quantity of- 1 for Part # 72P16184F - Artemis Laminate, Pedestal for shells, unfinished back and top, BBF, 16x18, Same

Laminate - No Dual, Standard Laminate: Dune, Edge Profile: Radius Edge, Pull Style: Sono Pulls, Pull Finish: Silver

Metallic

e) Quantity of- 1 for Part # 72HTPR721640L0OHXR11 - Artemis Laminate, Hutch, 5 HI, Single Pier Clsd LamRt, OH

Frst Doors, 72Wx16D, Same Laminate - No Dual, Standard Laminate: Dune, Edge Profile: Radius Edge, Grade 2 Fabric

TBD, Standard Tackboard

f) Quantity of- 1 for Part # 72SC7824X46 - Artemis Laminate, Credenza Shell, Fixed Mod Panel, 78x24, Laminate

Top/Polymer Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, Same Laminate - No Dual, One 60mm Dia.

Round Grommet Std. Location, Std. Grommet Location – TBD, Satin Metallic

g) Quantity of- 1 for Part # 72RHC6030LS6 - Artemis Laminate, Crescent Return, Square Lam Leg, Lt, 60x30, Laminate

Top/Polymer Edge, Standard Laminate: Dune, Edge Profile: Radius Edge, Same Laminate - No Dual, AR-60mm Dia.

Round Grommet, Satin Metallic

h) Quantity of- 1 for Part # AER1B23DW--ALP-G1-G1-G1-C7-BK-231-03- Work Chair,New Aeron,B Size,Std-Hgt

Range Adj,Tlt Lim and Seat Angle, Fully Adj Arms, Non-Uphst Armpads, Back Support Option:ALP:+adjustable posturefit SL,Frame Finish:G1:+graphite, Chassis Finish:G1:+graphite, Base Finish:G1:+graphite, Casters/Glides:C7:+2

1/2" caster, black yoke, hard floors or carpet, Armpad Finish: BK:+black, 8Z Pellicle:231:+8Z Pellicle-Pr Cat 1, Colors:03:+8Z Pellicle graphite

i) Quantity of- 1 for Part # JEC121-OA - Guest Chair 21 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5% 26.5L X

24.25W (IN)

j) Quantity of- 1 for Part # JEC124-OA - Guest Chair 24 Seat Width, Open Arm, COM/Grade 1 upholstery, FRAME

FINISH: Standard – Metallic Beige, ARM CAPS: Solid Surface in Standard – Taupe, BACK FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty, SEAT FABRIC: C.F. Stinson, LLC, Didi, DID 62, Color – Putty +\-5%26.5L X

7. Basement Storage Room 01: MTR Code- SH3

Quantity of- 3 for…