Q-20 Series Charcoal Grill.pdf

RJμThomas Mfg. Co., Inc.

PO Box 946 • Cherokee, IA 51012-0946 • PH: 712-225-5115 • 800-762-5002 • FAX: 712-225-5796

E-mail: pilotrock@rjthomas.com • Web Site: https://www.pilotrock.com © 2021 RJμThomas Mfg. Co., Inc. PILOT ROCK® Park Products is a registered trademark of RJμThomas Mfg. Co., Inc.

SPECIFICATION

BULLETIN

#SPC-GR-023

REV. 03-21

Model Q-20 B2 Multilevel Grill with Tip-back Grate

AVAILABLE OPTIONS

Bolt-on Utility Shelf, (S3) Swivel Utility Shelf, (S6) Grill Cover Surface Mount Base, (B3) Portable Disk Base, (B4) Stainless Steel Grate

SPECIFICATIONS:

• Model Q-20 B2 has a single 300 sq. in. cooking grate. Grate is supported by the two end panels and adjusts to 4 levels between 3-1/2" and 8-3/4" above the firebed in a 15" x 20" x 10" high firebox.

• Firebox and swivel mechanism is constructed entirely of 3/16" plate steel with integral ash flanges die-formed into front edge to retain ashes and provide reinforcement. All exposed corners are rounded to 1-1/2" radius and all edge connections are entirely welded. Allowance for drainage is provided.

• Grate is constructed from 5/8" dia. A-36 steel bars for support handles and 1/2" dia. A-36 steel bars spaced 1-1/8" on centers to provide the grate surface and is permanently attached to firebox. Grate tips upward for easy fire building and cleaning.

• Grate is provided with two substantially constructed spring coil grips on each end outside of firebox suitable for public use made from 1/8" x 1/2" steel flat bar (not wire springs).

• Grill is permanently attached after base installation by means of absolutely theft-proof base attachment allowing continuous 360º rotation of grill in either direction.

• Standard: Grill is supported by a 3-1/2" O.D., 40" long, steel pipe for permanent installation in concrete footing (indicated by “B2” in model no., e.g. Q-20 B2).

• Entire unit is finished in high temperature, heat resistant, nontoxic black enamel.

• Optional: Firebox and B2 base post available in hot-dip galvanized finish. Add "/G" to model no., e.g. Q/G-20 B2G.

• Optional: Grill is provided with a grate constructed from 304 grade stainless steel bars with the same component dimensions and construction features as above (add “/S” after “Q” in model no., e.g. Q/S-20 B2).

• Optional: Grill is provided with a 3/16" x 7" x 20" steel plate utility shelf. Add “/S” after “20” in model no., e.g.

Q-20/S B2.

• Optional: Model S6 3/16" x 7" x 16" black enamel painted steel plate swivel utility shelf capable of rotating 360° around base post. Must be installed on base post before grill. Order as separate item, Model S6.

• Optional: Grill is provided with a bolt-down base plate base for hard surface mounting applications. Replace “B2” in model no.

with “B3”, e.g. Q-20 B3.

• Optional: Grill is provided with a portable disc base. Replace “B2” in model no. with “B4”, e.g. Q-20 B4.

• Optional: A rear hinged Grill Cover is a 21" x 15-1/2" x 5" canopy with enclosed ends constructed of formed and welded 14 ga. steel. Two 3/8" carriage bolts with locking nuts act as the hinge points. A handle constructed of a 1/8" x 1/2" coil spring grip and 1/2" dia. steel bars is attached to one side of the cover. Finished in high temperature, nontoxic black enamel. Cover can not be used with optional bolt-on shelf. Indicate choice by adding “/GC” to model no., e.g.

Q-20/GC B2.

Model Q-20/S B2 Multilevel Grill with Tip-back Grate.

Shown with Optional Model S3 Utility Shelf

• Four cooking height levels with easy grate adjustment in die-cut slots

• Grate tips up for easy fire building and cleaning

• Integral ash retainer flange combats heat warpage and prevents ashes from falling from the firebox

• Theft-proof base attachment

• Full 360° rotation for draft control

• Public use-type grips of coiled steel bar

• Economic design, quality construction

TITLE

ALL DIMENSIONS IN INCHES

DRAWN BY

DATE

DWG. NO.

WWM

10-30-08

AI-1827

MODEL Q-20 PARK GRILL WITH B2 BASE - SHOWN WITH

OPTIONAL UTILITY SHELF

Specification Bulletin #SPC-GR-023

21 7/8 15 3/8

25 3/8

36 3/16

A

NOTE:

LOCAL SOIL CONDITIONS MAY

REQUIRE A LARGER FOOTING

OPTIONAL UTILITY SHELF - ADD /S

TO MODEL NUMBER

A

A A

GRATE SHOWN IN

TIPPED BACK

POSITION FOR

CLEANING

12" DIA.

MIN.