PWS - AGE MECHANICS - 2026.pdf

PERFORMANCE WORK STATEMENT (PWS)

FOR

AEROSPACE GROUND EQUIPMENT (AGE) SERVICES

1.0 General:

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform Aerospace Ground Equipment (AGE) Services, as defined in this PWS.

1.2 Background: AGE Services are required at Volk Field Air National Guard Base (ANGB) located in Camp Douglas, WI 54618.

1.3 Period of Performance (PoP): The Period of Performance shall be one (1) Base Year of 12 months and two

(2) Option Year of 12 months.

1.4 General Information:

1.4.1 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS).

1.4.2 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.4.3 Recognized Holidays: The following are recognized United States (US) holidays. The contractor shall not perform services on these days:

1.4.3.1 New Year’s Day: January 1st

1.4.3.2 Martin Luther King, Jr.’s Birthday

1.4.3.3 President’s Day

1.4.3.4 Memorial Day

1.4.3.5 Juneteenth: June 19th

1.4.3.6 Independence Day: July 4th

1.4.3.7 Labor Day

1.4.3.8 Columbus Day

1.4.3.9 Veteran’s Day: November 11th

1.4.3.10 Thanksgiving Day

1.4.3.11 Christmas Day: December 25th

1.4.3.12 In the event of an undeclared Federal Holiday is observed by the Government, contractor services will not be required on that day(s). Such days will be treated as recognized Federal Holidays in accordance with this PWS and associated contract. The Contracting Officer (KO) will provide notification to the contractor regarding such instances.

1.4.4 Place and Performance of Services: The contractor shall provide services between the hours of 0730 - 1600 on Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Flexible scheduling is allowed between 0600 – 2200, in order to meet mission requirements, the contractor under no circumstance shall work more than 40 hours per week. Performance shall be at Volk Field ANGB; 100 Independence Drive Camp Douglas, WI 54618. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential. Teleworking is authorized only if approved by the Contracting Officer (KO).

1.4.4.1 The Government may permit telework by contractor employees when determined to be in the best interest of the Government in meeting work requirements. In furtherance of Continuity of Operations Planning (COOP), a telework program may be enacted to ensure that the Government maintains operational readiness during times of national emergency or incidents of national significance. Telework shall be at no additional cost to the Government and shall only be approved by the KO.

1.4.4.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.4.3 The contractor’s employees shall become familiar with and obey the regulations of the installation, including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation which may affect performance. The Government reserves the right to direct the removal of an employee for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.5 Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer’s Representative (COR). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the local installation’s Security Forces, Director of Emergency Services or local Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DoD, HAF and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.4.5.1 For contractors requiring Common Access Card (CAC): The CAC is the DoD Federal Personal Identity Verification (PIV) credential. CAC issuance requirements are as follows:

In accordance with Department of Defense Manual (DoDM) 1000.13-M-V1, DoD Identification (ID) Cards, January 23, 2014, initial issuance of a CAC requires, at a minimum, the completion of an Federal Bureau of Investigation (FBI) fingerprint check with favorable results and submission of a National Agency Check with Inquiries (NACI) (or investigation approved in Federal Investigative Standards) to the Under Secretary of Defense for Intelligence (USD(I)) approved investigative service provider. The issuance of a CAC will be based on four criteria: (a) eligibility for a CAC; (b) verification of DoD affiliation from an authoritative data source;

(c) completion of background vetting requirements according to the Federal Information Processing Standards Publication 201-2, Personal Identity Verification (PIV) of Federal Employees and Contractors, August 2013, and DoD Manual 5200.02, Procedures for the DoD Personnel Security Program (PSP), April 3, 2017, and (d) verification of a claimed identity. Sponsorship and enrollment information about each applicant must be registered in the Defense Enrollment Eligibility Reporting System (DEERS) through either the Real-Time Automated Personnel ID System (RAPIDS) using the DD Form 1172-2, or the Trusted Associate Sponsorship System (TASS).

1.4.5.1.1 HSPD-12 Background Investigation Requirements: For Contractors Requiring Common Access Card (CAC). Before CAC issuance, the contractor employee requires, at a minimum, a favorably adjudicated National Agency Check with Inquiries (NACI) or an equivalent or higher investigation in accordance with Air Force Directive 31-101. The contractor employee will be issued a CAC only if duties involve one of the following: (1) Both physical access to a DoD facility and access, via logon, to DoD networks on-site or remotely; (2) Remote access, via logon, to a DoD network using DoD-approved remote access procedures; or

(3) Physical access to multiple DoD facilities or multiple non-DoD federally controlled facilities on behalf of the DoD on a recurring basis for a period of 6 months or more. At the discretion of the sponsoring activity, an initial CAC may be issued based on a favorable review of the FBI fingerprint check and a successfully scheduled NACI at the Office of Personnel Management. The contractors Facility Security Officer (FSO), shall ensure that all contractor and subcontractor personnel whose duties require CAC card issuance have the appropriate security clearance or have been submitted for the appropriate security clearance, background investigation, prior to beginning the contract. The contractor FSO shall make all reasonable efforts to ensure that contractor employees meet CAC eligibility standards upon assignment to the contract and shall be held responsible for delays, failure to meet performance requirements or decreases in efficiency in accordance with the applicable inspection clause.

1.4.5.1.2 Trusted Associate Sponsorship System (TASS), CAC Application: The submission process for CAC applications is as follows:

1.4.5.1.2.1. The contractor's FSO or contractor employee shall submit TASS CAC Requests, (See attached Form) via mail / email to the designated TASS Trusted Agent (TA). The TASS TA for this requirement will be Volk Field Information Protection Officer at: 100 Independence Dr, Camp Douglas WI, 54618 or WI.CRTC.IPO.Org@us.af.mil or phone (608) 427-1524

1.4.5.1.2.2. If the contractor does not have the authority or ability to initiate the appropriate background investigations, contact the Volk Field Information Protection Office as soon as contract is award at WI.CRTC.IPO.Org@us.af.mil. Re-imbursement for the cost of background investigations may be applicable in this instance.

1.4.5.1.3. The contractor shall return issued CACs to the Volk Field Information Protection Officer upon departure or dismissal of each contractor employee and shall obtain a receipt for each card and provide it to the TA/COR. Failure to return CAC’s may incur additional cost for the contractor.

1.4.5.1.4 The contractor shall manage requests for new or renewal CAC cards in sufficient time to ensure that all contractor employees have them when needed to perform work under this contract. The contractor shall provide at least 10 calendar days advance notice to the TA, unless there are extenuating circumstances approved by the COR or KO.

1.4.5.2 RESERVED.

1.4.5.3 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.4 myLearning. All contractor employees and associated sub-contractor employees assigned to work on a government site and/or requiring access to a DoD network will be required to register with myLearning at commencement of services in order to complete the necessary training required of them initially and mailto:WI.CRTC.IPO.Org@us.af.mil mailto:WI.CRTC.IPO.Org@us.af.mil annually for the duration of the contract (i.e., DoD Information Assurance, OPSEC, Protecting Sensitive Information). myLearning website: https://lms-jets.cce.af.mil/moodle/

1.4.5.5 RESERVED.

1.4.5.6 AT Level 1 Awareness Training (AT): All contractor employees, to include subcontractor employees, requiring access to Government Installations, Facilities and Controlled Access areas shall complete AT Level I awareness training within 10 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. Certificates of completion for each affected contractor employee and subcontractor employee will be maintained by the COR or Antiterrorism Representative. AT Level I Awareness Training is available through myLearning by completing the Force Protection CBT.

1.4.5.7 Information Assurance (IA)/Information Technology (IT) Training: ) All contractor employees and associated sub-contractor employees shall complete the DoD Information Assurance Awareness Cyber Awareness Challenge before issuance of network access and annually thereafter. All contractor employees performing services involving IA/IT functions shall comply with DoD and Air Force training requirements in DoDD 8570.01, DoD 8570.01-M and AFPD 33-2 within six (6) of the start of contract performance. In accordance with DoD 8570.01-M , DFARS 252.239.7001 and AFM 33-282, contractor employees performing services supporting IA/IT functions shall be appropriately certified upon contract award. The baseline certification as stipulated in DoD 8570.01-M shall be completed upon contract award.

1.4.5.8 OPSEC Training: In accordance with AFI 10-701, Operations Security, OPSEC PMs/SMO/SMNCOs/Coordinators will provide OPSEC training or training materials to contract employees within 90 days of employees’ initial assignment to the contract and annually thereafter. General organizational orientations may need to be supplemented by duty-related orientations in the work center targeted toward specific critical information and vulnerabilities associated with the work. Initial training (OPSE 1301 - OPSEC Fundamentals) and refresher training (Protecting Sensitive Information) are both available on the myLearning website.

1.4.5.9 RESERVED.

1.4.5.10 RESERVED.

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use.

At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 Key Control. NOTE: All references to keys include key cards. The contractor shall establish and implement methods of ensuring that no keys/key cards issued by the Government are lost or misplaced or are used by unauthorized persons. No keys issued by the Government shall be duplicated. The contractor shall include procedures covering key control in the QCP. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The contractor shall immediately report any occurrences of lost or duplicated keys/key cards to the COR.

1.4.6.1.1 In the event keys, other than master keys, are lost or duplicated, the contractor shall, upon direction by the KO, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the Government replaces or re-keys the locks, the Government will deduct the total cost of lock replacement or re-keying from the monthly payment due the contractor. In the event a master key is lost or duplicated, the Government will replace all locks and keys for that system and will deduct the total cost from the monthly payment due the contractor.

1.4.6.1.2 The contactor shall prohibit the use of the Government issued keys/key cards by any persons other than the contractor’s employees. The contractor shall prohibit the opening of locked areas by contractor employees to permit entrance of persons other than contactor employees engaged in the performance of services in those areas, or personnel authorized entrance by the KO.

https://lms-jets.cce.af.mil/moodle/

1.4.6.2 Lock Combinations: The contractor shall establish and implement methods of ensuring that no lock combinations are revealed to unauthorized persons. The contractor shall ensure that lock combinations are changed when personnel having access to the combinations no longer have a need to know such combinations. These procedures shall be included in the contractor’s QCP.

1.4.7 Special Qualifications:

1.4.7.1 The contractor shall ensure all employees have a valid civilian driver’s license.

1.4.7.2 The contractor shall provide documentation that employee is properly trained to drive Government owned vehicles. The Government will not provide training on government owned vehicles or equipment.

Below is a list of vehicles the contractor employee shall be trained to operate.

1.4.7.2.1 Sedans and standard automobiles.

1.4.7.2.2 Trucks; 3,000lbs or less payload rating.

1.4.7.2.3 Tow vehicle with trailer draw bar pull capacity of 60,000lbs or less. Equipped with multiple pintle hooks, front and rear. Vehicle is also known as a Bobtail.

1.4.7.2.4 Forklifts IAW OSHA regulations

1.4.7.2.4.1 4,000lbs capacity

1.4.7.2.4.2 10,000lbs capacity

1.4.7.2.4.3 All-terrain, 10,000lbs capacity

1.4.7.2.4.4 Utility Terrain Vehicles

1.4.7.2.4.5 DELETED

1.4.7.2.5 Universal Refrigerant Handlers Certificate

1.4.7.3 DELETED

1.4.7.4 DELETED

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with FAR Subpart 42.5. The KO, COR and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance.

At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO. The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor’s status as a “contractor” shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non-Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “contractor” displayed. The contractor shall retrieve all identification media (including vehicle passes) from its employees who depart employment for any reason. The contractor shall return all identification media (i.e., badges and vehicles passes) to the KO within 14 days of an employee’s departure.

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero-tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at FAR 22.17.

1.4.12 RESERVED.

1.4.13 RESERVED.

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15 RESERVED.

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2 Contracting Officer (KO): A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3 Contracting Officer Representative (COR): An employee of the U.S. Government designated by the KO to monitor contractor performance. Such appointment will be in writing and will state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications.

This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 Defective Service: A service output that does not meet the standard of performance associated with the

PWS.

2.1.5 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.6 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.8 Quality Assurance: The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.11 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms:

AFI Air Force Instruction AFMAN Air Force Manual AGE Aerospace Ground Equipment AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CM Contract Manager CMRA Contractor Manpower Reporting Application COR Contracting Officer Representative DAFMAN Department of the Air Force Manual DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense FAR Federal Acquisition Regulation GFP/M/E/S Government Furnished Property/Material/Equipment/Services HSPD Homeland Security Presidential Directive IA Information Assurance IAW In Accordance With KO Contracting Officer NGB National Guard Bureau OCI Organizational Conflict of Interest POC Point of Contact PPE Personal Protective Equipment PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance

QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program TE Technical Exhibit TO Technical Order USD(I) Under Secretary of Defense for Intelligence

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S): NONE

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

5.0 Requirements: The contractor shall:

5.1 Perform preventative maintenance actions and inspections on aerospace ground equipment (AGE) at Volk Field in accordance with AFI, AFMAN, DAFMAN, and the technical orders for each piece of equipment.

5.2 Perform unscheduled maintenance and quick repairs on AGE in accordance with the technical orders for each piece of equipment.

5.3 Ensure all AGE is serviced and ready for operation in accordance with technical orders for each piece of equipment. Perform required services on the following equipment items:

5.3.1 A/M32A-60 Generator/Bleed Air

5.3.2 Turbine Engines GTCP85-180

5.3.3 A/M32A-86 Generator

5.3.4 Transformer Rectifiers

5.3.5 EPU-5/E Frequency Converter

5.3.6 FL-1D Floodlight Set

5.3.7 A/M24U-2 Floodlight Set

5.3.8 Portable Electrical Load Banks, A/C and D/C

5.3.9 A/M24T-16 Trailer Mounted Load Bank

5.3.10 MC-7 Air Compressor

5.3.11 MC-20 Air Compressor

5.3.12 A/M32A-95 Turbine Compressor/ Bleed Air Unit

5.3.13 Self-Generating Nitrogen Servicing Cart

5.3.14 A/M32C-10 Air Conditioner

5.3.15 New Generation Heater

5.3.16 TTU-228 Hydraulic Test Stand Diesel Driven

5.3.17 A/M27T-17 Universal Hydraulic Test Stand Diesel Driven

5.3.18 MHU-83 Bomb Lift

5.3.19 MJ-1 Bomb Lift

5.3.20 Aircraft Axle Jacks 20,35, and 65 ton

5.3.21 Aircraft Tri-pod Jacks 10, 20, and 30 ton

5.3.22 Universal Jack Tester

5.3.23 Aircraft Tow Bars, Universal, KC-135 and C-17

5.3.24 Oil Dispensing Cart

5.3.25 Hydraulic Dispensing Cart

5.3.26 Aircraft Disabled Wheel Dolly

5.3.27 Aircraft Stores Loader

5.3.28 Aircraft Fuel Tank Dolly

5.3.29 Aircraft Canopy Crane, 1500 lb.

5.3.30 Aircraft Engine Crane, 6000 lb.

5.3.31 Fuel Bowsers

5.3.32 Gaseous Nitrogen and Oxygen Carts

5.3.33 Liquid Oxygen Carts

5.3.34 Maintenance Stands B-1, B-2, B-4, B-5, B-7, and C-1

5.3.35 A/M32A-112, Generator Set, B809

5.3.36 Wing Jack Trailer

5.3.37 Towable Aircraft Staircase

5.3.38 MBA-32-51 Flightline Air Conditioning System

5.4 Document all maintenance actions and inspections on AFTO 244 and in the Enterprise Logistics Management System (ELMS) according to Air Force Instruction (AFI) 21-101 and the applicable technical order.

5.5 DELETED

5.6 Ensure tools and PPE are always accounted for and toolbox is kept locked within the work area when not in use. Track tools in TCMax, tool automated accountability system. IAW AFI-21-101_angsup

5.7 Be certified competent to drive on Volk Field airfield-controlled movement area and acquire AF Form 483.

5.8 Dispatch AGE to aircraft on the flight line.

5.9 Tow AGE to and from storage areas.

5.10 Drive government owned vehicles on and off base to retrieve/transport parts and equipment.

5.11 Drive government owned material handling equipment to load and unload equipment.

5.12 Maintain a clean and orderly work area.

5.13 Store, handle, use, and dispose of hazardous materials/waste according to installation, state, and federal environmental standards. Comply with federal, state and laws.

5.14 Accomplish research for equipment parts required to complete repairs. Complete necessary documentation to requisition repair parts. Ensure components designated as recoverable and repairable are returned to the federal supply system.

5.15 DELETED

5.16 Complete above ground and underground storage tank inspections in accordance with Wisconsin, Volk Field, and work center environmental policy.

5.17 DELETED

5.18 DELETED

5.19 Accomplish all work center specific familiarization training to include but not limited to hazcom, storm water release, AGE specific fall protection, electrical control, Volk Field airfield driving.

5.20 DELETED

5.21 Complete AGE-related vehicle pre-use inspections

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar or http://farsite.hill.af.mil/

Defense Federal Acquisition Regulation Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/curr ent/index.html or http://farsite.hill.af.mil/

DoDM 1000.13-M-V1 DoD Identification (ID) Cards (Enclosure 2, paragraph 3.b)

01/23/2014 http://www.esd.whs.mil/Directives/issuances/dod m/

Federal Information Processing

Standards (FIPS) Publication 201-2 Personal Identity Verification (PIV) of

Federal Employees and Contractors (paragraph 9)

August 2013 http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.2 01-2.pdf

DoDM 5200.2 Regulation 5200.02 Procedures for the DoD Personnel

Security Program (PSP)

04/03/2017 http://www.dtic.mil/whs/directives/corres/pub1.

html https://www.acquisition.gov/?q=browsefar http://farsite.hill.af.mil/ http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://farsite.hill.af.mil/ http://www.esd.whs.mil/Directives/issuances/dodm/ http://www.esd.whs.mil/Directives/issuances/dodm/ http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf http://www.dtic.mil/whs/directives/corres/pub1.html

Homeland Security Presidential Directive (HSPD)-12

Policy for a Common Identification Standard for Federal Employees and

Contractors

08/27/2004 https://www.dhs.gov/homeland-security-presidential-directive-12

DoD 5400.11-R Department of Defense Privacy

Program

05/14/2007 http://www.dtic.mil/whs/directives/corres/pub1.

html

DoDD 8140.01

Cyberspace Workforce Management 08/11/2015 http://www.dtic.mil/whs/directives/corres/dir.ht ml

DoD 8570.01-M Information Assurance Workforce

Improvement Program

12/19/2005 (Change 4:

11/10/2015) http://www.dtic.mil/whs/directives/corres/pub1.

html

DoD 5220.22-M National Industrial Security Program

Operating Manual

02/28/2006 (Change 2:

05/18/2016) http://www.dtic.mil/whs/directives/corres/pub1.

html

AFI 21-101_ANGSUP

Aircraft and Equipment Maintenance

Management

03/04/2016 http://static.e-publishing.af.mil/production/1/ang/publication/af i21-101_angsup/afi21-101_angsup.pdf

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance Objective

Performance Standard Acceptable Quality Levels

(AQL)

Surveillance Method / By Whom

5.1 Provide

Preventative Maintenance

Perform all preventative maintenance IAW the applicable Technical Orders.

Meets the standard 99% of the time.

Periodic Inspection /

COR

5.2 Provide

Unscheduled Maintenance

Provide unscheduled maintenance IAW the applicable Technical Order.

Meets the standard of 99% of the time.

Periodic Inspection /

COR

5.4 Document

Maintenance Actions

Documents all maintenance actions

IAW AFI 21-101_ANGSUP.

Meets the standard 98% of the time

Periodic Inspection /

COR

5.5 Tool

Accountability

Ensure all tools and rags are accounted for.

Meets the standard 98% of the time.

Periodic Inspection /

COR

https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 http://www.dtic.mil/whs/directives/corres/pub1.html http://www.dtic.mil/whs/directives/corres/pub1.html http://www.dtic.mil/whs/directives/corres/dir.html http://www.dtic.mil/whs/directives/corres/dir.html http://www.dtic.mil/whs/directives/corres/pub1.html http://www.dtic.mil/whs/directives/corres/pub1.html