Proj Manual 26054 HartwickPinesExhibits 2of2.pdf

3122 Hartwick Pines Scale Drawn: As Noted Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

2 Front View Scale: 1/4” = 1’

3 Right View Scale: 1/4"=1'

Top View Scale: 1/4” = 1’ 4 Isometric View

Scale: NTS

285-3/4"

164-3/4"

121-1/4"

181"

284"

120"

164-3/4"

181"

C.7-C.19 Plate C-3.05

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

2 Front View Scale: 1/4” = 1’

3 Right View Scale: 1/4"=1'

Top View Scale: 1/4” = 1’ 4 Isometric View

Scale: NTS

97-1/4"

284"

157-3/4"

284"

164-3/4"

4"

4" 164-3/4"

96-1/2"

46"

46"

19-3/4"

9-1/2"

C.7 Old-growth forest photomural

C.9 Topic Panel

PNT-1

PNT-1

Trim piece from top of Diorama base to ceiling

Trim piece from top of Diorama base to ceiling

C.7, C.9 Plate C-3.06

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

2 Front View Scale: 1” = 1’

3 Right View Scale: 1"=1'

Top View Scale: 1” = 1’ 4 Isometric View

Scale: NTS

56"

13"

1"

3" 2-1/2"

40" 10"

40"

56"

16-1/4"

23" 23"

4"

2" 4"

2"

11-1/2"3-1/4"

14" 10"

1" 1"

C.10 Reading Rail

C.11 Bronze tactile

PWD-1

C.10-C.11 Plate C-3.07

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

2 Front View Scale: 1” = 1’

3 Right View Scale: 1"=1'

Top View Scale: 1” = 1’ 4 Isometric View

Scale: NTS

41"

40"

14"

16-1/4"

4"

2" 11-1/4"

15"

14"

33"

4" 2"

PWD-1

C.12 Reading Rail

C.13 Reading Rail

C.14 Reading Rail

X3

C.12, C.13, C.14 Plate C-3.08

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

2 Front View Scale: 1/4” = 1’

3 Right View Scale: 1/4"=1'

Top View Scale: 1/4” = 1’ 4 Isometric View

Scale: NTS

285-1/2"

5-3/4" 34-3/4"

10"

77"

90-1/2"

49-1/4"

285-1/2" 281"

13"

118-3/4"

94-3/4" 95"

105" 39"

78-1/4"

10"

166"

13"

160"

38-3/4" 40-3/4"

62-3/4"

166"

13-1/2"

LAM-2

VNL-1

19"

9-1/2" 19"x9.5" graphic mounted to a "cut out" in the tree

Artfab door in bark that reveals bugs inside tree

C.8 Diorama base

C.15 Sapling pine C.16 Mature pine

C.17 Tree Snag

C.18 Downed Log

10" Rubber doors with leaf texture that lift to reveal to show life below the leaf litter

Ground form with leaf texture and mounds

40-1/2"

49-1/4"

C.8, C.15-C.19 Plate C-3.09

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Top View Scale: 1/2” = 1’

4 Isometric View Scale: NTS

Pine Martin in branch

Deer antler, partially chewed

Shelf Mushroom

Shreek Owl in hole

Pileated woodpecker (male)

Grey Fox on forest floor

Red squirrel

C.19 Layout C-3.10

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Front View Scale: 1 1/2” = 1’

2 Isometric View Scale: NTS

77"

46"

10"

10"

NOTES:

A wall mounted interactive where visitors are asked to identify one of the "hero" species at Hartwick Pines State Park through a close-up photo of that animals predominant feature. The answer would be revealed under a vertical flip door.

C.20 Guess the Species from the Body Part graphic interactive

Flip doors exact location subject to change due to graphic design

C.20 Plate C-3.11

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

3 Top View Scale: 3/4” = 1’

1 Front View Scale: 3/4” = 1’

2 Left View Scale: 3/4"=1'

4 Isometric View Scale: NTS

46"

46"

4"

26" 30"

52-3/4"

44-3/4"

9-1/2"

12-3/4"

4"

30"

28"

46"

36"

27-1/2"

15-1/4"

6"

36"

60"

32"

30"

2"

NOTES:

Laminated table with "log" legs.

Digital microscope connected to a monitor so multiple people can experience at once.

SRS will create poured resin cubes of client provided specimens

Exact microscope subject to change

LAM-2

PNT-1

LAM-1

White Pine "log" legs

PNT-1

C.21 Science Station - Under the Microscope

C.21 Plate C-3.12

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

3 Top View Scale: 3/4” = 1’

1 Front View Scale: 3/4” = 1’

2 Left View Scale: 3/4"=1'

4 Isometric View Scale: NTS

77"

30" 26"

4"

63"

21"

4"

26" 30"

6-3/4" 4"

77"

14-3/4"

6" 4"

20-3/4"

73"

NOTES:

Laminated table with "log" legs.

A table for visitors to touch client provided nature specimen.

LAM-2

PNT-1

PNT-1

White Pine "log" legs

C.22 Science Station - Touch Table

C.22 Plate C-3.13

ADD/ALT

Scale Drawn: As Noted Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

3 Top View Scale: 3/4” = 1’

1 Front View Scale: 3/4” = 1’

2 Left View Scale: 3/4"=1'

4 Isometric View Scale: NTS

34" 8"

80"

4"

84"

10"

8"

20"

84" 80"

9"

4" 40"

4"

20"2" 6"

42"

4"

NOTES:

Laminated kiosk with a core sample inside of a plexi tube mounted to the side of it.

LAM-2

LAM-1

Surface mounted graphic

C.23 Science Sation - Core Sample

C.23 Plate C-3.14

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

3 Top View Scale: 3/4” = 1’

1 Front View Scale: 3/4” = 1’

2 Left View Scale: 3/4"=1'

4 Isometric View Scale: NTS

57" 4"

27-3/4"

8"

66"

62"

42-1/4"

4"

2"

27"

13-3/4"

30" 26"

4"

29-3/4"

21-3/4"

1-1/2"

25-1/2"

66"

30"

14"

49-3/4" 8"

NOTES:

Laminated kiosk with 8 squeeze bottle smell stations.

These smells could be switched out seasonally or around special events.

The circular graphics rotate to reveal what smells you are smelling. Both the rotating graphic and the reveal would need to be removed and then the reveal graphic changed when the smells change.

C.24 Science Sation - Smells of the Forest

LAM-2

VNL-1

Inset Graphic

Flip doors with backer graphic so entire unit can be easily changed out.

6"

3-1/2" 3-1/2" 14-1/4"14-1/4"

PNT-1

Squeeze bottles captured in a metal frame

PWD-2

C.24.a.1C.24.a.1

C.24.a.2

C.24.a.3

C.24.a.4

C.24.a.5

C.24.a.6

C.24.a.6

C.24.a.7

C.24 Plate C-3.15

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Front View Scale: 1 1/2” = 1’

2 Isometric View Scale: NTS

9-1/2"

2"

C.27 Au Sable River Topic Panel

D.3 State Lands map graphic

D.4 Indigenous Cultures Topic Panel

D.13 Jobs in the Forest

X4

46"

C.27,D.3,D.4,D.13 Plate C-3.16

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Area D Plan View Scale: 1/4” = 1’

93-1/2"

283-1/2"

127-3/4"

87-1/4"

136-1/4" 91"

D.1 Area Intro Tree-osk

D.3 State Lands map graphic

D.4 Indigenous Cultures Topic Panel

D.5 Indigenous Management AV Interactive

D.6 Hands-Off Management InteractiveD.7 Backing graphic

D.8 Hands-Off Management Topic Panel

D.9 Sustainable Wood Harvesting Topic Panel 1

D.10 Vitrine on base

D.11 Sustainable Wood Harvesting Topic Panel 2

D.12 Vitrine on base

D.15 Conservation Topic Panel

D.16 Conservation Management Station

D.17 Visitor Feedback Station

D.13 Jobs in the Forest

Area D: Plan View D-1.00

14'-3 1/4"

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Area D Elevation (6) 1 Scale: 1/4” = 1’

15-1/4"15 1/4"15-1/4"

170-3/4"

32"31"

D.4 Indigenous Cultures Topic Panel

D.5 Indigenous Management AV Interactive

Area D: Elevation 1 (Section 6) D-1.01

'-3 /4

8' -4

/2

12'-7"

14'-2 1/2"

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Area C Elevation (3) 2 Scale: 1/4” = 1’

32"

18-1/2" 18-1/2"18-1/2" 58" 64-3/4"

209-1/2"

32" 32" 32"

D.3 State Lands map graphic

D.9 Sustainable Wood Harvesting Topic Panel 1

D.10 Vitrine on base

D.11 Sustainable Wood Harvesting Topic Panel 2

D.12 Vitrine on base

D.13 Jobs in the Forest

Area D: Elevation 2 (Section 3) D-1.02

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Area C Elevation (4) 3 Scale: 1/4” = 1’

32" 32"

13-1/2"

56"

13-1/2" 13-1/2"

150-3/4"

D.15 Conservation Topic Panel D.16 Conservation

Management Station

D.17 Visitor Feedback Station

Area D: Elevation 3 (Section 4) D-1.03

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024Area D: Full Rendering 1 D-2.00

Designer: Cathan Murray

Developer: John Vanek

9/09/2024Area D: Full Rendering 2 D-2.01

Designer: Cathan Murray

Developer: John Vanek

9/09/2024Area D: Isolated Rendering 1 D-2.02

Designer: Cathan Murray

Developer: John Vanek

9/09/2024Area D: Isolated Rendering 2 D-2.03

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

1 Front View Scale: 1” = 1’

2 Right View Scale: 1"=1' 3 Top View

Scale: 1” = 1’

4 Isometric View Scale: NTS

86-1/4"

16"

38-1/4"

24"

52"

11-1/2"

4-3/4"

4-1/2"

88-3/4" 88-3/4"

4-1/2"

7-1/2"

38-1/4"

3"4-1/2" 7-1/2"

2"

NOTES:

Currently priced to be sculpted legs resembling real bark of a sugar maple.

Double sided graphic

Bolted to the ground.

D.1 Area Intro Tree-osk

Maple cross beams to match wood type of the legs.

D.1 Plate D-3.00

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

3 Top View Scale: 3/4” = 1’

1 Front View Scale: 3/4” = 1’

2 Left View Scale: 3/4"=1'

4 Isometric View Scale: NTS

48"

39"

22-1/2"

4"

36"

3-1/2"

48"

10"

3-1/2"

8-1/2"

70-3/4"

NOTES:

Laminated wall mounted kiosk with a 50" monitor in it. On the kiosk would be several RFID cubes showing various animals and plants of the eco system. Removing a cube and placing it on the space to the right (RFID Reader under the table) would trigger a slide to change that shows what happens to the eco system without that component of nature.

If not played with after a certain amount of time a slideshow of images would play of area wildlife. This would act as the attract screen.

This Interactive would require a brightsign player (or equivalent) a controller and the non touch monitor, along with an RFID reader and several chips laminated into graphics

6-3/4"

6-3/4"

4-1/2"

45"

23"

11"

19-1/2" 23"

36"

11-1/4"

3-1/2"

LAM-1

LAM-1

D.5 Indigenous Management AV Interactive

D.5 Plate D-3.01

2 Front View Scale: 3/4” = 1’

3 Right View Scale: 3/4"=1' 4 Back View

Scale: 3/4” = 1’

5 Isometric View Scale: NTS

1 Top View Scale: 3/4” = 1’

45-1/2" 42-1/2"

4"

16-1/4" 20-1/4"

42-1/4"1"

4" 42-1/2"

23-1/2"

41-1/2"

45-1/2"

8-3/4"

21-1/2"

4"

34-1/2"

58"

23-1/2"

21-1/2"

4"

20-1/4"

18-1/4"

15-1/4"

42-1/2"

58"

D.6 Hands-Off Management Interactive

D.7 Backing graphic

D.8 Conervation Graphic

NOTES:

Laminated kiosk with a hand crank.

When the visitor spins the handle a geared series of graphics rotate in series to the right. This shows a cause and effect of certain hands-off management processes.

LAM-2

VNL-1

18-1/2"

D.6.a Spinner 1 - Potential Problems

D.6.b Spinner 2 - Initial Effects

D.6.c Spinner 3 - Downstream Effects

4"

1-1/2"

3122 Hartwick Pines Scale Drawn: As Noted Designer: Cathan Murray

Developer: John Vanek

9/09/2024D.6-D.8 Plate D-3.02

3 Top View

1 Front View Scale: 3/4” = 1’

2 Left View Scale: 3/4"=1'

4 Isometric View Scale: NTS

32"

4"

18"

50"

46"

33"

2"

32"

42-1/2"

40"

35-3/4"

22-1/4"

18-1/2"

8"

16-1/2"

40"40-1/4"

44-1/4"

2"

LAM-2

VNL-1

LAM-1

D.9 Sustainable Wood Harvesting Topic Panel 1

D.10 Vitrine on base

3122 Hartwick Pines Scale Drawn: As Noted Designer: Cathan Murray

Developer: John Vanek

9/09/2024D.9-D.10 Plate D-3.03

3 Top View

1 Front View Scale: 3/4” = 1’

2 Left View Scale: 3/4"=1'

4 Isometric View Scale: NTS

46"

33"

32"

18-1/2"

2"

16-1/2"

8"

18-1/4"

18-1/2"

27-1/4"

12"

Same base as D.10 without the vitrine top

LAM-2

VNL-1

LAM-1

D.12 Vitrine on base

D.13 Jobs in the Forest

3122 Hartwick Pines Scale Drawn: As Noted Designer: Cathan Murray

Developer: John Vanek

9/09/2024D.11-D.12 Plate D-3.04

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Front View Scale: 1 1/2” = 1’

2 Isometric View Scale: NTS

46"

33"

2"

D.15 Conservation Topic Panel

D.15 Plate D-3.05

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

Front View Scale: 1 1/2” = 1’

2 Isometric View Scale: NTS

77"

46"

2"

11"

10"

10"

11"

NOTES:

Thicker wall graphic with sliding doors built into it. Sliding the door reveals additional information under.

D.16 Conservation Management Station

D.16 Plate D-3.06

Designer: Cathan Murray

Developer: John Vanek Graphic Designer: Nan Hildebrandt Design Development II

9/09/2024

3 Top View Scale: 3/4” = 1’

1 Front View Scale: 3/4” = 1’

2 Left View Scale: 3/4"=1'

4 Isometric View Scale: NTS

120-1/4"

74-1/2"

48"

7-3/4" 37"4-1/4"

10-1/4"

25-1/2"

33"

4-1/4"

9"

4-3/4"

2"

2"

2"

37"1"

48"

NOTES:

A profile cut graphic mounted to the wall along with a small writing station. Leaf cut post it notes (store purchased) would be available for visitors to write on, answering a change-able question posed by the staff. Visitor would then place the post-it on the wall to build a tree with leaves.

D.17 Visitor Feedback Station

LAM-2

LAM-3

PNT-3

Post-it alcove 4.75"x4.75"x.75" PNT-1

Pen alcove 2"x2"x3" PNT-1

D.17 Plate D-3.07

Designer: Cathan Murray

Developer: John Vanek

9/09/2024Birdseye Rendering 1 0-5.00

Designer: Cathan Murray

Developer: John Vanek

9/09/2024Birdseye Rendering 2 0-5.01

Visitor Center Exhibits

SCHEM AT IC DES IGN 2DES IG N PAC K AGE APRIL 2024 • SPLIT ROCK STUDIOS

THANK YOU

MICHSPEC DTMB Appendix VI 00800 − 1 (R 03/25) V2

APPENDIX VI – ASBESTOS AND LEAD SURVEY REPORT

DATED AUGUST 26, 2024

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive Romulus, Michigan 48174

(734) 955-6600

Fax: (734) 955-6604

To:

Attention:

Atlas - Novi

46555 Humboldt Dr. Suite 100

Novi, Michigan 48377

Project Location:

DNR

Hartwick Pines

Client Project: 188BS24516

272101ETL Job:

Ryan Rae

Lab Sample Number Client Sample Number Sample Type Completed

1699831 Asbestos1-RM-A 09/04/2024

1699832 Asbestos1-RM-B 09/04/2024

1699833 Asbestos1-RM-C 09/04/2024

1699834 Asbestos2-VP-A 09/04/2024

1699835 Asbestos2-VP-B 09/04/2024

1699836 Asbestos2-VP-C 09/04/2024

1699837 Asbestos3-M-A 09/04/2024

1699838 Asbestos3-M-B 09/04/2024

1699839 Asbestos3-M-C 09/04/2024

1699840 Asbestos4-WP-A 09/04/2024

1699841 Asbestos4-WP-B 09/04/2024

1699842 Asbestos4-WP-C 09/04/2024

1699843 Asbestos5-EC-A 09/04/2024

1699844 Asbestos5-EC-B 09/04/2024

1699845 Asbestos5-EC-C 09/04/2024

1699846 Asbestos6-EC-A 09/04/2024

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this information in error, please notify ETL immediately. Thank you.

Lab Sample Number Client Sample Number Sample Type Completed

1699847 Asbestos6-EC-B 09/04/2024

1699848 Asbestos6-EC-C 09/04/2024

1699849 Asbestos7-CC-A 09/04/2024

1699850 Asbestos7-CC-B 09/04/2024

1699851 Asbestos7-CC-C 09/04/2024

1699852 Asbestos8-CC-A 09/04/2024

1699853 Asbestos8-CC-B 09/04/2024

1699854 Asbestos8-CC-C 09/04/2024

1699855 Asbestos9-DW-A 09/04/2024

1699856 Asbestos9-DW-B 09/04/2024

1699857 Asbestos9-DW-C 09/04/2024

1699858 Asbestos10-PI-A 09/05/2024

1699859 Asbestos10-PI-B 09/05/2024

1699860 Asbestos10-PI-C 09/05/2024

1699861 Asbestos11-WBS-A 09/05/2024

1699862 Asbestos11-WBS-B 09/05/2024

1699863 Asbestos11-WBS-C 09/05/2024

1699864 Asbestos12-CA-A 09/05/2024

1699865 Asbestos12-CA-B 09/05/2024

1699866 Asbestos12-CA-C 09/05/2024

1699867 Asbestos13-IC-A 09/05/2024

1699868 Asbestos13-IC-B 09/05/2024

1699869 Asbestos13-IC-C 09/05/2024

1699870 Asbestos14-WG-A 09/05/2024

1699871 Asbestos14-WG-B 09/05/2024

1699872 Asbestos14-WG-C 09/05/2024

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this

1699873 Asbestos15-CB-A 09/05/2024

1699874 Asbestos15-CB-B 09/05/2024

1699875 Asbestos15-CB-C 09/05/2024

1699876 Asbestos16-CA-A 09/05/2024

1699877 Asbestos16-CA-B 09/05/2024

1699878 Asbestos16-CA-C 09/05/2024

1699879 Asbestos17-CM-A 09/05/2024

1699880 Asbestos17-CM-B 09/05/2024

1699881 Asbestos17-CM-C 09/05/2024

1699882 Asbestos18-CB-A 09/05/2024

1699883 Asbestos18-CB-B 09/05/2024

1699884 Asbestos18-CB-C 09/05/2024

1699885 Asbestos19-VF-A 09/05/2024

1699886 Asbestos19-VF-B 09/05/2024

1699887 Asbestos19-VF-C 09/05/2024

1699888 Asbestos20-CB-A 09/05/2024

1699889 Asbestos20-CB-B 09/05/2024

1699890 Asbestos20-CB-C 09/05/2024

1699891 Asbestos21-IC-A 09/05/2024

1699892 Asbestos21-IC-B 09/05/2024

1699893 Asbestos21-IC-C 09/05/2024

1699894 Asbestos22-CA-A 09/05/2024

1699895 Asbestos22-CA-B 09/05/2024

1699896 Asbestos22-CA-C 09/05/2024

1699897 Asbestos23-WP-A 09/05/2024

1699898 Asbestos23-WP-B 09/05/2024

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this

1699899 Asbestos23-WP-C 09/05/2024

1699900 Asbestos24-CT-A 09/05/2024

1699901 Asbestos24-CT-B 09/05/2024

1699902 Asbestos24-CT-C 09/05/2024

1699903 Asbestos25-CP-A 09/05/2024

1699904 Asbestos25-CP-B 09/05/2024

1699905 Asbestos25-CP-C 09/05/2024

1699906 Asbestos26-CT-A 09/05/2024

1699907 Asbestos26-CT-B 09/05/2024

1699908 Asbestos26-CT-C 09/05/2024

1699909 Asbestos27-CT-A 09/05/2024

1699910 Asbestos27-CT-B 09/05/2024

1699911 Asbestos27-CT-C 09/05/2024

1699912 Asbestos28-RI-A 09/05/2024

1699913 Asbestos28-RI-B 09/05/2024

1699914 Asbestos28-RI-C 09/05/2024

1699915 Asbestos29-IC-A 09/05/2024

1699916 Asbestos29-IC-B 09/05/2024

1699917 Asbestos29-IC-C 09/05/2024

1699918 Asbestos30-IC-A 09/05/2024

1699919 Asbestos30-IC-B 09/05/2024

1699920 Asbestos30-IC-C 09/05/2024

1699921 Asbestos31-TP-A 09/05/2024

1699922 Asbestos31-TP-B 09/05/2024

1699923 Asbestos31-TP-C 09/05/2024

1699924 Asbestos32-WP-A 09/05/2024

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this

1699925 Asbestos32-WP-B 09/05/2024

1699926 Asbestos32-WP-C 09/05/2024

Reviewed by:

Summary

Sample Layer MasticMethod

PLM 135 18Emily Schroeder

This report is intended for use solely by the individual or entity to which it is addressed. This report may not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. It may contain information that is privileged, confidential and otherwise exempt by law from disclosure. If the reader of this information is not the intended recipient or an employee of its intended recipient, you are herewith notified that any dissemination, distribution or copying of this information is strictly prohibited. If you have received this

Certificate of Analysis

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699831

1-RM-A

PLM 100% OtherPLM Trace CelluloseBrown / OrangeShingle

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699831

1-RM-A

PLM 100% OtherPLM Trace CelluloseOrangeShingle

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699831

1-RM-A

PLM 100% OtherPLM Trace CelluloseGrayShingle

Non-Fibrous

Homogenous Layer-3 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699832

1-RM-B

PLM 100% OtherPLM Trace CelluloseBrown / OrangeShingle

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699832

1-RM-B

PLM 100% OtherPLM Trace CelluloseOrangeShingle

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699832

1-RM-B

PLM 100% OtherPLM Trace CelluloseGrayShingle

Non-Fibrous

Homogenous Layer-3 Analyst: Ben Jones

Date Analyzed : 09/04/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699833

1-RM-C

PLM 100% OtherPLM Trace CelluloseBrown / OrangeShingle

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699833

1-RM-C

PLM 100% OtherPLM Trace CelluloseOrangeShingle

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699833

1-RM-C

PLM 100% OtherPLM Trace CelluloseGrayShingle

Non-Fibrous

Homogenous Layer-3 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699834

2-VP-A

PLM 100% OtherPLM Trace CelluloseBlackVapor Paper

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699835

2-VP-B

PLM 100% OtherPLM Trace CelluloseBlackVapor Paper

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699836

2-VP-C

PLM 100% OtherPLM Trace CelluloseBlackVapor Paper

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699837

3-M-A PLM 100% OtherPLM Trace CelluloseGrayMortar

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699838

3-M-B PLM 100% OtherPLM Trace CelluloseGrayMortar

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699839

3-M-C PLM 100% OtherPLM Trace CelluloseGrayMortar

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699840

4-WP-A

PLM 12% OtherPLM 88% CelluloseBlackWaterproofing

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699841

4-WP-B

PLM 12% OtherPLM 88% CelluloseBlackWaterproofing

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699842

4-WP-C

PLM 12% OtherPLM 88% CelluloseBlackWaterproofing

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699843

5-EC-A

PLM 100% OtherPLM Trace CelluloseRedPenetration Caulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699844

5-EC-B

PLM 100% OtherPLM Trace CelluloseRedPenetration Caulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699845

5-EC-C

PLM 100% OtherPLM Trace CelluloseRedPenetration Caulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699846

6-EC-A

PLM 100% OtherPLM Trace CelluloseRed/BrownCaulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699847

6-EC-B

PLM 100% OtherPLM Trace CelluloseRed/BrownCaulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699848

6-EC-C

PLM 100% OtherPLM Trace CelluloseRed/BrownCaulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699849

7-CC-A

PLM 100% OtherPLM Trace CelluloseGrayConcrete Floor

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699850

7-CC-B

PLM 100% OtherPLM Trace CelluloseGrayConcrete Floor

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699851

7-CC-C

PLM 100% OtherPLM Trace CelluloseGrayConcrete Floor

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699852

8-CC-A

PLM 100% OtherPLM Trace CelluloseGrayConcrete

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699853

8-CC-B

PLM 100% OtherPLM Trace CelluloseGrayConcrete

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699854

8-CC-C

PLM 100% OtherPLM Trace CelluloseGrayConcrete

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699855

9-DW-A

PLM 6% OtherPLM Trace Cellulose

PLM 94% Fiberglass

YellowDuct Wrap

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699855

9-DW-A

PLM 2% OtherPLM 98% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699856

9-DW-B

PLM 6% OtherPLM Trace Cellulose

PLM 94% Fiberglass

YellowDuct Wrap

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699856

9-DW-B

PLM 2% OtherPLM 98% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699857

9-DW-C

PLM 6% OtherPLM Trace Cellulose

PLM 94% Fiberglass

YellowDuct Wrap

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/04/2024

PLM None Detected 1699857

9-DW-C

PLM 2% OtherPLM 98% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/04/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699858

10-PI-A

PLM 5% OtherPLM Trace Cellulose

PLM 95% Fiberglass

YellowPipe Insulation

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699858

10-PI-A

PLM 11% OtherPLM 89% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699859

10-PI-B

PLM 5% OtherPLM Trace Cellulose

PLM 95% Fiberglass

YellowPipe Insulation

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699859

10-PI-B

PLM 11% OtherPLM 89% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699860

10-PI-C

PLM 5% OtherPLM Trace Cellulose

PLM 95% Fiberglass

YellowPipe Insulation

Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699860

10-PI-C

PLM 11% OtherPLM 89% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699861

11-WBS-A

PLM 95% OtherPLM 5% CelluloseWhiteDrywall

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699861

11-WBS-A

PLM 94% OtherPLM 6% CelluloseWhiteMud

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699862

11-WBS-B

PLM 95% OtherPLM 5% CelluloseWhiteDrywall

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699862

11-WBS-B

PLM 94% OtherPLM 6% CelluloseWhiteMud

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699863

11-WBS-C

PLM 95% OtherPLM 5% CelluloseWhiteDrywall

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699863

11-WBS-C

PLM 94% OtherPLM 6% CelluloseWhiteMud

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699864

12-CA-A

PLM 98% OtherPLM 2% CelluloseBrownConstruction Adhesive

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699865

12-CA-B

PLM 98% OtherPLM 2% CelluloseBrownConstruction Adhesive

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699866

12-CA-C

PLM 98% OtherPLM 2% CelluloseBrownConstruction Adhesive

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699867

13-IC-A

PLM 100% OtherPLM Trace CelluloseWhiteCaulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699868

13-IC-B

PLM 100% OtherPLM Trace CelluloseWhiteCaulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699869

13-IC-C

PLM 100% OtherPLM Trace CelluloseWhiteCaulk

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699870

14-WG-A

PLM 100% OtherGrayWindow Glaze

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699871

14-WG-B

PLM 100% OtherGrayWindow Glaze

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699872

14-WG-C

PLM 100% OtherGrayWindow Glaze

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699873

15-CB-A

PLM 100% OtherPLM Trace CelluloseBeigeCove Base

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699873

15-CB-A

PLM 100% OtherPLM Trace CelluloseCreamAdhesive

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699873

15-CB-A

PLM 4% OtherPLM 96% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-3 Analyst: Ben Jones

Date Analyzed : 09/05/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699874

15-CB-B

PLM 100% OtherPLM Trace CelluloseBeigeCove Base

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699874

15-CB-B

PLM 100% OtherPLM Trace CelluloseCreamAdhesive

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699874

15-CB-B

PLM 4% OtherPLM 96% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-3 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699875

15-CB-C

PLM 100% OtherPLM Trace CelluloseBeigeCove Base

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699875

15-CB-C

PLM 100% OtherPLM Trace CelluloseCreamAdhesive

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699875

15-CB-C

PLM 4% OtherPLM 96% CelluloseWhiteFibrous Material

Fibrous

Homogenous Layer-3 Analyst: Ben Jones

Date Analyzed : 09/05/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method. Any material that has greater than 1% asbestos content is considered to be an Asbestos Containing Material (ACM). These materials are regulated by both OSHA and the EPA and must be treated accordingly. Results are related to only to samples that were tested. An estimate of uncertainty can be provided at the client's request.

Polarized Light Microscopy Asbestos Analysis Report

Location :

To :

Novi,Michigan 48377

Atlas - Novi

46555 Humboldt Dr. Suite 100

DNR

Hartwick Pines

ETL Job :

Client Project :

272101

188BS24516

Environmental Testing Laboratories, Inc.

37575 W Huron River Drive

Romulus, Michigan 48174

(734) 955-6600, Fax: (734) 955-6604

Sample Description Appearance % Fibrous % Non-Fibrous % Asbestos

08/29/2024

09/04/2024

Date Collected :

Date Received :

PLM None Detected 1699876

16-CA-A

PLM 100% OtherPLM Trace CelluloseBeigeStair Tread

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699876

16-CA-A

PLM 100% OtherPLM Trace CelluloseBlackAdhesive

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699877

16-CA-B

PLM 100% OtherPLM Trace CelluloseBeigeStair Tread

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699877

16-CA-B

PLM 100% OtherPLM Trace CelluloseBlackAdhesive

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699878

16-CA-C

PLM 100% OtherPLM Trace CelluloseBeigeStair Tread

Non-Fibrous

Homogenous Layer-1 Analyst: Ben Jones

Date Analyzed : 09/05/2024

PLM None Detected 1699878

16-CA-C

PLM 100% OtherPLM Trace CelluloseBlackAdhesive

Non-Fibrous

Homogenous Layer-2 Analyst: Ben Jones

Date Analyzed : 09/05/2024

ETL, Inc. maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced without written approval by ETL, Inc. Test Method EPA 600/R-93-116 & EPA 600/M4-82/020 or NYSDOH-ELAP item 198.1 and/or 198.6 was used to analyze all samples. Matrix interference and/or resolution limits (i.e. detecting asbestos in non-friable organically bound materials) may yield false results in certain circumstances. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing. Interpretation and use of test results are the responsibility of the client. ETL, Inc. is not responsible for the accuracy of the results when requested to physically separate and analyze layered samples. Any

PLM results below 10% should be re-analyzed using the EPA recommended Point Count method.