7_NAMA_151059A_Proposal_Submission_Package1.pdf

National Mall and Memorial Parks

P16PS01126

Rehabilitate Water Systems for Emergency and Potable Water Supply in Potomac Park

NAMA 151059A

REQUEST FOR PROPOSAL

(RFP)

Proposal Submission Package

NATIONAL PARK SERVICE

DENVER SERVICE CENTER

INSTRUCTIONS:

In accordance with Sections L and M of the solicitation, the following forms, as applicable, are provided for the preparation of proposals for the subject solicitation.

For Technical Volume I:

1. Experience Questionnaire

2. Subcontractor Reference

3. Key Personnel Qualifications

4. Proposed Equals

5. Hazardous Materials Identification Listing

6. Past Performance Questionnaire

For Business & Price Volume II:

7. SF 24 Bid Bond

8. General References

Experience Questionnaire READ CAREFULLY: The purpose of this form is for the offeror to list projects performed during the past five (5) years that are similar to the work described in this solicitation. Provide a maximum of ten projects. Use this form to address your familiarity with the Statement of Work and with the evaluation criteria described in the solicitation. Include Area Codes with all telephone numbers. Fill in the information by typing or printing legibly.

It is especially important that the offeror disclose instances in which their experience may be considered by others to be less than fully satisfactory. The offeror should tell their side of the story and describe remedial corrective action that has been taken or will be taken to correct the deficiency. Failure to do so may result in a determination that an offeror has been less than candid with the Government, which could result in an unfavorable assessment of the offeror’s experience.

NAME OF CONTRACTOR/OFFEROR:

# PROJECT NAME:

Project Location:

Name of Owner:

Address of Owner:

Telephone Number:

Project Value:

Dates of Construction:

DESCRIPTION OF THE PROJECT AND SCOPE OF OFFEROR’S WORK

PERFORMANCE REMARKS

DESCRIPTION OF THE PROJECT AND SCOPE OF OFFEROR’S WORK (continuation)

PERFORMANCE REMARKS (continuation)

Subcontractor Reference READ CAREFULLY: The purpose of this form is for the offeror to list certain subcontractors identified in the Instructions, Conditions, and Notices to Offerors (Section L) who are considered critical to the successful accomplishment of the project. Use as many sheets as necessary. These subcontractor references should include additional relevant projects similar to the work described in the plans and specifications. Include Area Codes with all telephone numbers. Fill in the information by typing or printing legibly.

SUB CONTRACTOR (PROPOSED):

ADDRESS:

TELEPHONE NUMBER: ( )

# PROJECT

NAME:

Name of Owner:

Location:

Prime Contractor Telephone Number:

Subcontract $ Value:

Dates of Construction:

Reference Name and Telephone Number: ( ) .

Dates of Construction:

DESCRIPTION & SCOPE OF WORK

SPECIFIC AREAS OF EXPERIENCE (SEE INSTRUCTIONS FOR THE SUBMISSION OF OFFERS AND OTHER

INFORMATION – CAPABILITY CRITERIA):

DESCRIPTION & SCOPE OF WORK {continuation}

SPECIFIC AREAS OF EXPERIENCE (SEE INSTRUCTIONS FOR THE SUBMISSION OF OFFERS AND OTHER INFORMATION – CAPABILITY CRITERIA) {continuation}:

Key Personnel Qualifications READ CAREFULLY: The purpose of this form is for the Offeror to list the qualifications of all key personnel as described in the Instructions, Conditions, and Notices to Offerors (Section L). Use additional sheets as needed.

Experience and qualifications include those job-related training courses; certificates and licenses; honors;

performance awards; and specialty skills that are relevant to the proposed project. Provide dates, but do not send documents.

Provide the state in which registration or license is held and the registration or license number. Fill in the information by typing or printing legibly.

NAME OF CONTRACTOR/OFFEROR:

PERSONNEL INFORMATION:

Name:

Job Title:

Years of Experience With This Firm: Years of Experience With Other Firms:

EDUCATION AND PROFESSIONAL REGISTRATION:

Top Educational Level Obtained: Year:

Area of Specialization:

Professional Registrations:

Area of Specialization:

EXPERIENCE AND QUALIFICATIONS

PROPOSED EQUALS

In accordance with Provision 52.211-06 (Section L), the following products are being proposed as equals. Provide all attachments required by the provision, as applicable. Use additional sheets of paper as necessary.

Section No. Paragraph No. Product/Model No. Proposed Product/Model No.

A. By submitting the proposed equal, the contractor certifies that it:

1. Has investigated the proposed item and determined that it is equal or superior in all respects to that specified.

2. Will provide, as a minimum, the same warranties for the proposed item as for the item specified.

3. Has determined that the proposed item is compatible with interfacing items.

4. Will coordinate the installation of an approved item and make all changes required in other elements of the work because of the substitution.

5. Waives all claims for additional expenses that may be incurred as a result of the substitution.

B. The Contractor is encouraged to submit for approval products that exceed accessibility standards, are sustainable and/or made from recycled or environmentally responsible material.

Every effort will be made to approve these materials.

HAZARDOUS MATERIALS IDENTIFICATION LISTING

In accordance with Clause 52.223-3, Hazardous Material Identification and Material Safety Data, of the Contract, contractor is required to identify any hazardous materials that will be delivered under this contract.

List below all known hazardous materials to be used in performance of the work and submit with the proposal/bid. If material components are unknown at the time of submission, respond with a statement to that effect.

PAST PERFORMANCE QUESTIONNAIRE

INSTRUCTIONS: Offeror to complete Sections I and II and transmit questionnaire to reference listed in Section II Reference to complete Sections III and IV and transmit back to Contracting Officer (see contact information at bottom of form)

I. CONTRACT IDENTIFICATION

CONTRACTOR NAME: CONTRACT NO:

CONTRACTOR ADDRESS:

CONTRACT TYPE:

[ ] FIRM-FIXED-PRICE

[ ] COST REIMBURSEMENT

[ ] OTHER____________________________

[ ] ACTIVE [ ] COMPLETED

[ ] ROUTINE [ ] COMPLEX

DATES OF PERFORMANCE: AWARD AMOUNT $___________________

TOTAL WITH MODS $___________________

PROJECT DESCRIPTION:

II. AGENCY (CUSTOMER) IDENTIFICATION

AGENCY/CLIENT (CUSTOMER) NAME:

TITLE/PHONE:

III. PAST PERFORMANCE RATING

Rating Scale: E = Excellent. Considerably surpassed requirements/expectations.

G = Good. Surpassed requirements/expectations.

S = Satisfactory. Met requirements/expectations

M = Marginal. Met some requirements/expectations

U = Unsatisfactory. Did not meet requirements/expectations

1. QUALITY: (Circle applicable rating)

a. Conformance with contract requirements E G S M U

b. Quality of workmanship (including subcontractors) E G S M U

c. General oversight by project manager and superintendent E G S M U

d. Coordination with and control of subcontractors E G S M U

e. Compliance with Davis-Bacon wage rate and labor usage requirements

E G S M U

f. Avoidance of accidents/safety violations E G S M U

g. Ability to work in remote locations, if applicable E G S M U

2. TIMELINESS:

a. Adherence to project delivery schedules E G S M U

b. Submission of change proposals E G S M U

c. Response to technical direction and change orders E G S M U

d. Response to correction of identified problems E G S M U

e. Submission of timely/accurate/complete billings E G S M U

f. Ability to meet project schedule milestones E G S M U

g. Submission of materials/other submittals E G S M U

3. BUSINESS RELATIONS:

a. Flexibility and cooperativeness in resolving problems E G S M U

b. Tenacity and innovativeness in resolving problems E G S M U

c. Relationships with subcontractors, including prompt payment E G S M U

National Park Service/ Denver Service Center Contact Information:

Contracting Officer: Victoria Nosal Contract Specialist: Tim Burger

MAILING ADDRESS: National Park Service / Denver Service Center (DSC-CS) ATTN: Victoria Nosal

12795 West Alameda Parkway Lakewood, CO 80228

OR EMAIL FORM TO: victoria_nosal@nps.gov and timothy_burger@nps.gov

d. Relationships with owner’s representative E G S M U

e. End user was satisfied with services performed E G S M U

IV. COMMENTS

Provide any additional comments for items in Section III

Item No. Comment

POC SIGNATURE/DATE:

Please provide contact information where you may be reached during normal business hours:

BID BOND

(See instruction on reverse)

DATE BOND EXECUTED (Must not be later than bid opening date)

OMB

NO.:

9000-0045

Public reporting burden for this collection of information is estimated to average 25 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the FAR Secretariat (MVR), Federal Acquisition Policy Division, GSA, Washington, DC 20405.

SURETY(IES) (Name and business address)

PENAL SUM OF BOND BID IDENTIFICATION

PERCENT

OF BID

PRICE

AMOUNT NOT TO EXCEED BID DATE INVITATION NO.

MILLION(S) THOUSAND(S) HUNDRED(S) CENTS

FOR (Construction, Supplies,or Services)

OBLIGATION:

We, the Principal and Surety(ies) are firmly bound to the United States of America (hereinafter called the Government) in the above penal sum. For payment of the penal sum, we bind ourselves, our heirs, executors, administrators, and successors, jointly and severally. However, where the Sureties are corporations acting as co-sureties, we, the Sureties, bind ourselves in such sum "jointly and severally" as well as "severally" only for the purpose of allowing a joint action or actions against any or all of us. For all other purposes, each Surety binds itself, jointly and severally with the Principal, for the payment of the sum shown opposite the name of the Surety. If no limit of liability is indicated, the limit of liability is the full amount of the penal sum.

CONDITIONS:

The Principal has submitted the bid identified above.

THEREFORE:

The above obligation is void if the Principal - (a) upon acceptance by the Government of the bid identified above, within the period specified therein for acceptance (sixty (60) days if no period is specified), executes the further contractual documents and gives the bond(s) required by the terms of the bid as accepted within the time specified (ten (10) days if no period is specified) after receipt of the forms by the principal; or (b) in the event of failure to execute such further contractual documents and give such bonds, pays the Government for any cost of procuring the work which exceeds the amount of the bid.

Each Surety executing this instrument agrees that its obligation is not impaired by any extension(s) of the time for acceptance of the bid that the Principal may grant to the Government. Notice to the surety(ies) of extension(s) are waived. However, waiver of the notice applies only to extensions aggregating not more than sixty (60) calendar days in addition to the period originally allowed for acceptance of the bid.

WITNESS:

The Principal and Surety(ies) executed this bid bond and affixed their seals on the above date.

PRINCIPAL

INDIVIDUAL SURETY(IES)

SIGNATURE(S)

1.

(Seal)

2.

(Seal)

NAME(S)

(Typed)

1. 2.

CORPORATE SURETY(IES)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is usable

STANDARD FORM 24 (REV. 10-98)

Prescribed by GSA - FAR (48 CFR) 53.228(a)

PRINCIPAL (Legal name and business address) TYPE OF ORGANIZATION ("X" one)

INDIVIDUAL PARTNERSHIP

JOINT VENTURE

STATE OF INCORPORATION

CORPORATION

SIGNATURE(S)

1.

(Seal)

2.

3.

Corporate Seal NAME(S) &

TITLE(S)

(Typed)

1. 2. 3.

SU

R

ET

Y

A

NAME &

ADDRESS

STATE OF INC. LIABILITY LIMIT ($)

Seal

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

SU

R

ET

Y

NAME &

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

(Typed)

1. 2.

SU

R

ET

Y

C

NAME &

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

(Typed)

1. 2.

SU

R

ET

Y

D

NAME &

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

(Typed)

1. 2.

SU

R

ET

Y

E

NAME &

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

(Typed)

1. 2.

SU

R

ET

Y

F

NAME &

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

(Typed)

1. 2.

SU

R

ET

Y

G

NAME &

SIGNATURE(S)

1. 2.

NAME(S) &

TITLE(S)

INSTRUCTIONS

1. This form is authorized for use when a bid guaranty is required. Any deviation from this form will require the written approval of the Administrator of General Services.

2. Insert the full legal name and business address of the Principal in the space designated "Principal" on the face of the form. An authorized person shall sign the bond. Any person signing in a representative capacity (e.g., an attorney-in-fact) must furnish evidence of authority if that representative is not a member of the firm, partnership, or joint venture, or an officer of the corporation involved.

3. The bond may express penal sum as a percentage of the bid price. In these cases, the bond may state a maximum dollar limitation (e.g., (e.g., 20% of the bid price but the amount not to exceed dollars).

4. (a) Corporations executing the bond as sureties must appear on the Department of the Treasury's list of approved sureties and must act within the limitation listed therein. where more than one corporate surety is involved, their names and addresses shall appear in the spaces (Surety A, Surety B, etc.) headed "CORPORATE SURETY(IES)." In the space designed "SURETY(IES)" on the face of the form, insert only the letter identification of the sureties.

(b) Where individual sureties are involved, a completed Affidavit of Individual surety (Standard Form 28), for each individual surety, shall accompany the bond. The Government may require the surety to furnish additional substantiating information concerning its financial capability.

5. Corporations executing the bond shall affix their corporate seals. Individuals shall execute the bond opposite the word "Corporate Seal";

and shall affix an adhesive seal if executed in Maine, New Hampshire, or any other jurisdiction requiring adhesive seals.

6. Type the name and title of each person signing this bond in the space provided.

7. In its application to negotiated contracts, the terms "bid" and "bidder" shall include "proposal" and "offeror."

STANDARD FORM 24 (REV. 10-98) 8ACK

General References READ CAREFULLY: The purpose of this form is for the offeror to provide the Government with general references in the spaces provided as described in the Instructions, Conditions, and Notices to Offerors (Section L). Include Area Codes with all telephone numbers. Fill in the information by typing or printing legibly.

It is especially important that the offeror disclose instances in which their relationships with the references may be considered less than fully satisfactory. The offeror should tell their side of the story and describe remedial corrective action that has been taken or will be taken to correct the deficiency. Failure to do so may result in a determination that an offeror has been less than candid with the Government, which could result in an unfavorable assessment of the offeror’s past performance record. Provide explanations on separate sheets as necessary.

NAME OF CONTRACTOR/OFFEROR:

SURETY

Name of Surety:

Address of Surety:

Name of Agent:

Telephone Number:

CORPORATE BANK

Name of Bank:

Address of Bank:

Name of Agent:

Telephone Number:

Types and Numbers of Accounts:

CORPORATE BANK

Name of Bank:

Address of Bank:

Name of Agent:

Telephone Number:

Types and Numbers of Accounts:

INSURANCE COMPANY

Address:

Name of Agent:

Types of Policies:

SUBCONTRACTOR

Address:

Name of Contact:

Area of Specialized Work:

Address:

Name of Contact:

Address:

Name of Contact:

MATERIAL SUPPLIER

Address:

Name of Contact:

Telephone Number:

Types of Material:

MATERIAL SUPPLIER

Name:

Address:

Name of Contact:

Telephone Number:

Types of Material:

MATERIAL SUPPLIER

Name:

Address:

Name of Contact:

Types of Material: