P00R6601503 - IBM UPgrade AS400 PORFP.pdf

Purchase Order Request for Proposals (PORFP) Hardware Master Contract

Revised 051623 1

Section 1 –General Information

PORFP Number:

(eMMA BPM Number)

P00P6600738- BPM054957- Labor-2026-016

PORFP Type:

(Select one category from the drop-down list)

Fixed Price

Functional Area/s (FA) for this PORFP:

(Check all that apply)

FA I (Microcomputers / PCs / Servers / Associated Peripherals) FA II (Printers / Associated Peripherals) FA III (Network Communication Equipment) FA IV (Installation / Training) + FA I FA VI (Security / Cameras / Associated Peripherals)

FA IV + FA II

FA IV + FA III

FA IV + FA V (Manufacturer's Extended Warranty)

FA IV + FA VI

FA V

FA VI (Security / Cameras / Associated Peripherals)

Manufacturer Name IBM

Agencies must enter only one manufacturer when the manufacturer is known and direct the PORFP only to those Hardware Master Contractors authorized for that manufacturer. If the PORFP is generic or the manufacturer(s) are unknown, agencies must direct the PORFP to all Hardware Master Contractors.

Designated Small Business Reserve?(SBR):

(Select "Yes" or "No" from the drop-down list)

Yes

This is a Small Business Reserve Procurement for which the award will be limited to certified small business vendors. Only businesses that meet the statutory requirements set forth in State Finance and Procurement Article, §§14-501—14-505, Annotated Code of Maryland, and that are certified by GOSBA Small Business Reserve Program are eligible for the award of a contract.

Information on eligibility for the SBR program is available on the following website:

https://gomdsmallbiz.maryland.gov/Pages/sbr-program.aspx

Information on the SBR Vendor Registration processes is available on the following website:

https://gomdsmallbiz.maryland.gov/Pages/SBR-Registration.aspx

Minority Business Enterprise (MBE) Goal for FA IV Below (See "Hardware Master Contract MBE Participation Worksheet"):

PORFP Issue Date:

mm/dd/yyyy

01/16/2026 PROPOSAL DUE

DATE and TIME:

01/26/2026 12:00pm

Place of Performance:

https://gomdsmallbiz.maryland.gov/Pages/sbr-program.aspx https://gomdsmallbiz.maryland.gov/Pages/SBR-Registration.aspx

Revised 051623 2

Maryland Department of Labor Office of Administration 100 S. Charles St.

Baltimore, MD 21201

Special Instructions: LIMITED TO MASTER CONTRACTORS Only Master Contractors that are awarded a contract under the Hardware and Associated Equipment and Services 2012, 060B2490022, are eligible to submit a bid in response to this secondary competition Purchase Order Request for Proposal (PORFP). A current Master Contractor under the named Contract may submit an LOA with their bid to be considered for the award.

BID SUBMISSION INSTRUCTIONS

Purchase Order Request for Proposal (PORFP) responses will only be accepted through the State's eMaryland Marketplace Advantage (eMMA) e-Procurement system.

Instructions on how to submit proposals electronically can be found under Vendor Instruction at:

https://mdprocurement.freshdesk.com/support/solutions

Purchase Order Request for Proposal (PORFP) responses will be accepted through e-mail to the Agency Point of Contact listed in Section 2.

• All bids must be password protected by the bidder prior to submission.

• Bidders must e-mail the password-protected bid to the

Agency Point of Contact listed in Section 2.

• DO NOT SEND PASSWORDS WITH BID E-MAIL.

• The password must be e-mailed separately from the bid after the bid due date.

Questions Due (Closing) Date and Time:

01/21/2026 at 12:00 PM EDT Questions must be submitted in writing with the subject line, "Question for PORFP #P00P6600738," and be submitted in writing via e-mail to the Agency Point of Contact listed in Section 2 no later than the date and time specified.

SPECIAL REQUIREMENTS

1. The Department reserves the right to purchase more or less than the specified quantity to the extent limited by funding.

Charges that are multiple years shall be provided at a per-year price.

2. Purchase new and unused equipment.

https://mdprocurement.freshdesk.com/support/solutions

Revised 051623 3

3. The Master Contractor shall not impose a restocking fee if an item is returned due to damage or incorrect product shipped.

4. The Master Contractor must provide the estimated ship date/lead time for each item listed in the PORFP.

5. Please allow for pricing provided in response to this PORFP to be valid for at least 90 days after the set due date above.

6. The Master Contractor must be an authorized reseller for the

Manufacturer named in Section 1. The state reserves the right to request a Letter of Authorization (LOA) from the Manufacturer or Distributor.

7. The Master Contractor must include a screenshot of the

Manufacturer's Suggested Retail Price (MSRP) with the bid.

8. Bids must be received by the due date and time listed in the solicitation. Bids that are not received by the due date and time will not be accepted.

9. If applicable, the Master Contractor must provide a Mercury

Affidavit: https://procurement.maryland.gov/wp-content/uploads/sites/12/2018/04/Attachment-K- MercuryAffidavit.pdf

10. A "No Bid" form must be completed and submitted by the bid due date and time if your firm elects not to bid.

Security Requirements (if applicable):

No

Invoicing Instructions: Send invoice to Dllr.accountspayable@Maryland.gov.

An invoice not satisfying the requirements of a Proper Invoice (as defined at COMAR 21.06.09.01 and .02) cannot be processed for payment. To be considered a Proper Invoice, invoices must include the following information without error:

1) Contractor name and address;

2) Remittance address;

3) Federal taxpayer identification (FEIN) number, social security number, as appropriate;

4) Invoice period (i.e., the time period during which services covered by invoice were performed);

5) Invoice date;

6) Invoice number;

7) State-assigned Contract number;

8) State-assigned (Blanket) Purchase Order number(s);

9) Goods or services provided;

10) Amount due; and

11) Any additional documentation required by regulation or the Contract.

For items of work for which there is one-time pricing, those items https://procurement.maryland.gov/wp-content/uploads/sites/12/2018/04/Attachment-K-MercuryAffidavit.pdf https://procurement.maryland.gov/wp-content/uploads/sites/12/2018/04/Attachment-K-MercuryAffidavit.pdf https://procurement.maryland.gov/wp-content/uploads/sites/12/2018/04/Attachment-K-MercuryAffidavit.pdf https://procurement.maryland.gov/wp-content/uploads/sites/12/2018/04/Attachment-K-MercuryAffidavit.pdf https://procurement.maryland.gov/wp-content/uploads/sites/12/2018/04/Attachment-K-MercuryAffidavit.pdf mailto:Dllr.accountspayable@Maryland.gov

Revised 051623 4 shall be billed within 30 days of acceptance.

For items of work for which there is annual pricing, items shall be billed annually. The first year's invoice shall be billed within 30 days of contract start. Each additional year shall be billed on the anniversary of the first year's invoice.

Section 2 – Agency Point of Contact (POC) Information

Agency / Division Name: Maryland Department of Labor/Office of Contracts and Procurement

Agency POC Name: Wennetta Bynum Agency POC Phone Number:

410-767-2826

Agency POC E-mail Address:

Wennetta.Bynum@maryland .gov

Agency POC Fax:

Agency POC Mailing Address:

100 S. Charles Street Tower 1, 5th Floor Baltimore, MD 21201

Section 3 – Delivery Address / Work Site POC Information (if different from above)

Agency On-site Contact Name:

Joe Petronsino Agency On-site Phone Number:

410-767-2852

Agency On-site E-mail Address:

joe.petrosino@maryland.go v

Agency On-site Fax:

Agency On-site Address: 100 S. Charles Street – Tower 1 Suite 3409 Baltimore, MD 21201

Section 4 – Scope of Work

FA I – Microcomputers, PCs, Servers, and Associated Peripherals (Provide product specifications below. If some or all specifications are unknown, Master Contractors may propose products based on a detailed description in the

Business Need / Required Functionality field*) *Business Need / Required Functionality

The Power10 processor designed for hybrid cloud, AI, data analytics, and high-performance computing, offering enhanced performance, pervasive security with in-core encryption, and greater energy efficiency over the Power9.

Product Name Product Description Model # Qty Due Date mm/dd/yyyy

1. IBM Power System S1014

SEE ATTACHMENT #1 -

Line Item #1 and

STATEMENT OF WORK

Power 10- S1014

1 02/26/2026

2.

3.

mailto:joe.petrosino@maryland.go

Revised 051623 5

FA II - Printers and Associated Peripherals (Provide product specifications below. If some or all specifications are unknown, Master Contractors may propose products based on a detailed description in the

Business Need / Required Functionality field*) *Business Need / Required Functionality

Product Name Product Description Model # Qty Due Date mm/dd/yyyy

1.

2.

3.

FA III - Network Communication Equipment (Provide product specifications below. If some or all specifications are unknown, Master Contractors may propose products based on a detailed description in the

Business Need / Required Functionality field*)

1.

2.

3.

FA IV – Installation and Training Services (Provide a detailed description of required services and deliverables and include MBE goal listed above. MBE goal should be calculated only on FA IV value.

Installation / Training Services

Deliverables

Start Date

End Date

1. See Attachment #1 and statement of work

03/15/2026

2.

3.

FA V - Manufacturer's Extended Warranty (Provide a detailed description of warranty requirements and deliverables)

Warranty Requirements

Deliverables

Start Date

End Date

1.

2.

Revised 051623 6

3.

FA VI – Security, Cameras and Associated Peripherals

(Provide product specifications below. If some or all specifications are unknown, Master Contractors may propose products based on a detailed description in the

Business Need / Required Functionality field*)

1.

2.

3.

Section 5 – Evaluation Criteria – Technical Proposal (Provide a list of evaluation criteria in descending order of importance)

Evaluation Criteria

1. Conformance of Specifications

2. Cost

3. Conformance to Statement of Work (insert additional rows as needed)

Basis for Award Recommendation The agency Point of Contact listed in Section 2 will recommend the award to a responsive and responsible Master Contractor that provides the most advantageous offer considering the price and evaluation factors above. The agency Point of Contact will initiate and deliver a PO to the selected Master Contractor.

All awards from this PORFP shall comply with the requirements of COMAR 21.05.13.06.

Revised 051623 7

NO BID NOTICE/VENDOR FEEDBACK FORM

To help us improve the quality of State solicitations and to make our procurement process more responsive and business-friendly, please provide comments and suggestions regarding this solicitation. Please return your comments with your response. If you have chosen not to respond to this solicitation, please e-mail or fax this completed form to the attention of the Agency Point of Contact listed in Section 2.

Title: IBM Power System- Labor IT Solicitation No: Labor-2026-016

PORFP: P00P6600738- BPM054957

1. If you have chosen not to respond to this solicitation, please indicate the reason(s) below:

□ Other commitments preclude our participation at this time.

□ The subject of the solicitation is not something we ordinarily provide.

□ We are inexperienced in the work/commodities required.

□ Specifications are unclear, too restrictive, etc. (Explain in REMARKS section)

□ The scope of work is beyond our present capacity.

□ Doing business with the State is simply too complicated. (Explain in REMARKS section)

□ We cannot be competitive. (Explain in REMARKS section)

□ Time allotted for completion of the Bid is insufficient.

□ Prior State of Maryland contract experience was unprofitable or otherwise unsatisfactory. (Explain in REMARKS section)

□ Other:

2. If you have submitted a response to this solicitation, but wish to offer suggestions or express concerns, please use the REMARKS section below.

REMARKS:

Offeror Name: Date:

Contact Person: Phone ( ) -

Address:

E-mail Address:

NO BID NOTICE/VENDOR FEEDBACK FORM