Open Bid Package Addendum 01.pdf

Dodgeville Public Library 3757-004-00 - FF&E January 22, 2026 00000GLOCov - 1

Dodgeville Public Library

139 S Iowa St Dodgeville, Wisconsin 53533

Project Manual

Furniture, Fixtures and Equipment (FF&E)

Bid Package

January 22, 2026

Hammel, Green and Abrahamson, Inc.

333 East Erie Street

Milwaukee, Wisconsin 53202 Erica Frederiksen, 414-278-3359

HGA Commission Number 3757-004-00

© 2023 HGA, Inc.

ADDENDUM 01

FEBURARY 11, 2026

Dodgeville Public Library Table of Contents 3757-004-00 - FF&E January 22, 2026 00110 - 1

TABLE OF CONTENTS

FURNITURE, FIXTURES AND EQUIPMENT

BID PACKAGE

DIVISION 0 BIDDING REQUIREMENTS, CONTRACT FORMS AND CONDITIONS OF CONTRACT

00010 Table of Contents 00012 Key Contacts 00400 Bid Form

DIVISION 1 GENERAL REQUIREMENTS

01330 Submittal Procedures 01700 Contract Closeout 01740 Warranties

DIVISION 12 FURNISHINGS

12600 Library Furnishings & Equipment

Awarded Vendor expected to comply with respective grant conditions and requirements:

Furniture Plan A283 and A284 dated January 22, 2026

END OF SECTION

Wisconsin Flexible Facilities Program (FFP) Project Contract Terms & Conditions

LIST OF DRAWINGS

UPDATED

UPDATED

https://energyandhousing.wi.gov/Documents/Flexible%20Facilities/FFP-03-03%20FFP%20Project%20Contract%20Insertion.pdf https://energyandhousing.wi.gov/Documents/Flexible%20Facilities/FFP-03-03%20FFP%20Project%20Contract%20Insertion.pdf

Dodgeville Public Library Key Contacts 3757-004-00 - FF&E January 22, 2026 00012 - 1

SECTION 00012

KEY CONTACTS

Interior Designer:

Hammel, Green and Abrahamson, Inc.

333 East Erie Street Milwaukee, Wisconsin 53202

Senior Interior Designer:

Erica Frederiksen Phone: (414) 278-3359 Email: efrederiksen@hga.com

END OF DOCUMENT

FURNISHINGS FOR PROPOSAL FOR:

Dodgeville Public Library Library Furnishing - Bid Package Furniture, Furnishings and Equipment (FF&E) 410 E Leffler St Dodgeville, Wisconsin 53533

BIDDER: ___________________________________________

(1)

(2) SPECIFICATION GROUP LIST: This submittal contains bids on the following groups as listed.

SECTION 00400

BID FORM

(Submit in Duplicate)

We hereby submit our bid for FURNISHINGS FOR THE Dodgeville Public Library to OWNER, to accomplish the Work in strict accordance with the requirements of Specifications for the Work dated January 9, 2026.

Dodgeville Public Library 3757-004-00 Bid Package January 22, 2026

Bid Form 00400 - 1

Item Description Qty Unit Price Extended Price LC-8 Idara Lounge Chair (4-Prong Base)

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price LC-5 Summit Lounge Chair (Swivel Base)

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price LC-6a Mitt Lounge Chair

LC-6b Mitt Lounge Chair

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price LC-7 Laze Lounge Chair

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price L-1 Zori Lectern T-12 Foundation Table - Rectangle (42"D x 84"W) T-13 Foundation Table - Boat (60"D x 216"W)

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price B-6 Ritz Bench

Total Extended Price:

Manufacturer's Bid is as specified.

SPECIFIED MANUFACTURER: GROUP 4 - Source International

SPECIFIED MANUFACTURER: GROUP 5 - Enwork

SPECIFIED MANUFACTURER: GROUP 1 - Kimball International

SPECIFIED MANUFACTURER: GROUP 2 - Integra

SPECIFIED MANUFACTURER: GROUP 3 - Bernhardt

SPECIFIED MANUFACTURER: GROUP 6 - Nevins

Dodgeville Public Library 3757-004-00 Bid Package January 22, 2026

00400 - 1

CH-4a Quince Chair CH-4b Quince Chair T-3 Quince Table OTT-1a Beach stone B OTT-1b Beach stone B OTT-1c Beach stone B OTT-2a Beach stone C OTT-2b Beach stone C CH-7 Leland Handy Stool (Seat Pad)

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price CH-6a Virve Chair (Seat Pad, Four Leg Steel) CH-6b Virve Chair (Seat Pad, Four Leg Steel)

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price T-2 Haven Laptop Table

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price T-6 Ravelle Table (Round, 27"Dia.)

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price OTT-5a Lido Ottoman (42"Dia. Low Pouf, Hard Top) OTT-5b Lido Ottoman (42"Dia. Low Pouf, Hard Top)

Total Extended Price:

Manufacturer's Bid is as specified.

SPECIFIED MANUFACTURER: GROUP 11 - Martin Brattrud

SPECIFIED MANUFACTURER: GROUP 7 - Leland

SPECIFIED MANUFACTURER: GROUP 8 - Stylex

SPECIFIED MANUFACTURER: GROUP 9 - Watson

SPECIFIED MANUFACTURER: GROUP 10 - Arcadia

Dodgeville Public Library 3757-004-00 Bid Package January 22, 2026

00400 - 2

PL-1 Play Table - Medium PL-2 Play Potting Shed

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price B-1a Coact Lite Bench - Triple B-1b Coact Lite Bench - Triple B-2 Coact Lite Bench - Mid-back Loveseat OTT-6 X&O Ottoman - Cylinder

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price CH-1a Lumin Chair (Casters, Upholestered Seat) CH-1b Lumin Chair (Casters, Upholestered Seat) CH-2a Lumin Chair (4-Leg, Upholestered Seat) CH-2b Lumin Chair (4-Leg, Upholestered Seat) CH-2c Lumin Chair (4-Leg, Upholestered Seat) CH-3 Lumin Chair (Wire Rod, Plastic Seat) CH-5a Axys Stool (Counter Ht) CH-5b Axys Stool (Bar Ht) OTT-3 Pasea Mini Round Ottoman OTT-4 Pasea Mini Round Ottoman

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price D-1 4-Sided Highrise Mobile Display

Total Extended Price:

Manufacturer's Bid is as specified.

Item Description Qty Unit Price Extended Price PL-3 Marvelous Marble Wall

Total Extended Price:

Manufacturer's Bid is as specified.

SPECIFIED MANUFACTURER: GROUP 13 - OFS

SPECIFIED MANUFACTURER: GROUP 14 - SitOnIt

SPECIFIED MANUFACTURER: GROUP 15 - Mediatechnologies

SPECIFIED MANUFACTURER: GROUP 16 - Southpaw

SPECIFIED MANUFACTURER: GROUP 12 - TMC

Dodgeville Public Library 3757-004-00 Bid Package

00400 - 3January 22, 2026

BID FORM SUMMARY SHEET

Manufacturer Extended Price Group #1 Kimball International Group #2 Integra Group #3 Bernhardt Group #4 Source International Group #5 Enwork Group #6 Nevins Group #7 Leland Group #8 Stylex Group #9 Watson Group #10 Arcadia Group #11 Martin Brattrud Group #12 TMC Group #13 OFS Group #14 SitOnIt Group #15 Mediatechnologies Group #16 Southpaw Shipping/Freight Installation

BID TOTAL

(5) CONTRACT: If awarded the Contract, the Undersigned agrees to execute an agreement within the specified time Between Owner and Vendor for Library Furnishings, for the above stated compensation and provide the specified Performance and Labor/Material Payment bonds, if requested by the Owner.

(6) LIEN WAIVER: Upon award of contract, Contractor is required to submit lien waiver with final invoice.

(7) ADDENDA: Addendum instructions number(s) have been received and incorporated in this bid.

(8) If a Corporation, what is State of incorporation?

(9) If a Partnership, state full names of all partners:

Respectfully submitted, signed and sealed on the day of in the year 2026.

(10) Lead times can meet project schedule with installation in August, 2026.

Vendor Name:

Dodgeville Public Library 3757-004-00 Bid Package January 22, 2026

00400 - 5

Address:

By: Title:

By: Title:

(Affix Corporate Seal) Date:

Dodgeville Public Library 3757-004-00 Bid Package January 22, 2026

00400 - 6

Dodgeville Public Library Submittal Procedures 3757-004-00 - FF&E January 22, 2026 01330 - 1

SECTION 01330

SUBMITTAL PROCEDURES

PART 1 GENERAL

1.1 SUMMARY

A. Section Includes: Procedures for submittals.

1.2 DEFINITIONS

A. Shop Drawings: Shop Drawings are drawings, diagrams, schedules and other data specially prepared for the Work by the Contractor or a Subcontractor, Sub-subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work.

B. Product Data: Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate materials or equipment for some portion of the Work.

C. Samples: Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged.

1.3 RESPONSIBILITIES

A. Shop Drawings, Product Data, Samples and similar submittals are not Contract Documents. The purpose of their submittal is to demonstrate for those portions of the Work for which submittals are required the way the Contractor proposes to conform to the information given and the design concept expressed in the Contract Documents.

B. The Contractor shall review, approve and submit to the Architect: Shop Drawings, Product Data, Samples and similar submittals required by the Contract Documents with reasonable promptness and in such sequence as to cause no delay in the Work or in the activities of the Owner or of separate contractors. Submittals made by the Contractor which are not required by the Contract Documents may be returned without action.

C. The Contractor shall perform no portion of the Work requiring submittal and review of Shop Drawings, Product Data, Samples or similar submittals until the respective submittal has been approved by the Architect. Such Work shall be in accordance with approved submittals.

D. By approving and submitting Shop Drawings, Product Data, Samples and similar submittals, the Contractor represents that the Contractor has determined and verified materials, field measurements and field construction criteria related thereto, or will do so, and has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents.

E. The Contractor shall not be relieved of responsibility for deviations from requirements of the Contract Documents by the Architect’s approval of Shop Drawings,, Product Data, Samples or similar submittals unless the Contractor has specifically informed the Architect in writing of such deviation at the time of submittal and the Architect has given written approval to the specific deviation. The Contractor shall not be relieved or responsibility for errors or omissions in Product Data, Samples or similar submittals by the Architect’s approval thereof.

F. The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data, Samples or similar submittals, to revisions other than those requested by the Architect on previous submittals.

G. When professional certification of performance criteria of materials, systems or equipment is required by the Contract Documents, the Architect shall be entitled to rely upon the accuracy and completeness of such calculations and certifications.

3757-004-00 - FF&E 01330 - 2

H. The Architect will review and approve or take other appropriate action upon the Contractor’s submittals such as Shop Drawings, Product Data and Samples, but only for the limited purpose of checking for conformance with information given and the design concept expressed in the Contract Documents. The Architect’s action will be taken with such reasonable promptness as to cause no delay in the Work or in the activities of the Owner, Contractor or separate contractors, while allowing sufficient time in the Architect’s professional judgment to permit adequate review. Review of such submittals is not conducted for the purpose of determining the accuracy and completeness of other details such as dimensions and quantities, or for substantiating instructions for installation or performance of equipment or systems, all of which remain the responsibility of the Contractor as required by the Contract Documents. The Architect’s review shall not constitute approval of safety precautions or, unless otherwise specifically stated by the Architect, of any construction means, methods, techniques, sequences or procedures. The Architect’s approval of a specific item shall not indicate approval of an assembly of which the item is a component.

1.4 SUBMITTAL ACCEPTANCE

A. "Accepted" submittals have no exceptions noted. One set of accepted submittals will be returned to Contractor. Make appropriate copies for use and distribution.

B. "Accepted as Noted" submittals have exceptions noted but resubmission is not required. Make appropriate copies for use and distribution.

C. "Not Accepted” and “Revise and Resubmit" submittals are incomplete and/or need corrections.

Complete and/or correct and resubmit until final acceptance is obtained.

D. "Not Reviewed" means submittals was not required or was provided for information only.

1.5 DISTRIBUTION

A. Contractor is responsible for duplication and distribution of accepted submittals including shop drawings. Exchange directly with subcontractors and others involved, not through Owner or Architect.

B. Make and forward two copies of "Accepted" and "Accepted as Noted" submittals (product data, equipment brochures, and shop drawings only) to the Owner immediately upon receipt of submittals from the Architect.

C. Provide and exchange submittals as needed to coordinate Work.

1.6 SHOP DRAWINGS

A. Shop drawings submitted without requested information will be returned to Contractor marked "Not Accepted."

B. Drawings Submittal Requirements:

1. Submit PDF of each drawing.

2. Number in submittal sequence.

3. Drawings must be clear, sharp and readable quality acceptable to Architect/Engineer.

1.7 PRODUCT DATA AND EQUIPMENT BROCHURES

A. Provide PDFs of brochures, cutsheets, etc.

B. Photo copies (in PDF form) of original brochures are acceptable except as specified above. Photo copies must be clear and readable. Unreadable or unclear photocopies will be returned "Not Accepted."

C. Provide layout drawings in PDF form where necessary for field use or as required by Architect.

D. Product Data:

1. Submit digital PDF file.

2. Additional PDFs for other contractors for purposes of information and coordination.

January 22, 2026

3757-004-00 - FF&E 01330 - 3

3. Number in submittal sequence.

4. Field verified information will be required by successful bidder at later date.

5. Provide a clear space of not less than 10 square inches for Architect's stamps.

E. Warranties:

1. Where warranty is indicated, submit manufacturers' sample warranty PDF with shop drawings.

2. Submit actual executed warranties or guarantees to Owner with Close-out Submittals (see paragraph 1.8).

1.8 SAMPLES

A. Deliver samples of materials, equipment, assemblies and components as required by specifications to Architect with delivery costs prepaid. At Architect's direction, remove samples after approval.

1. Provide samples representative of actual product including finishes and other specified characteristics.

2. Submit samples per individual sections to represent wood species, grain, edgeband, base and joinery, stain and finish specified.

B. Number Samples:

1. Three (3) samples unless otherwise specified.

2. If accepted samples must be returned, submit extra sample for Architect's record as requested.

1.9 CLOSE-OUT SUBMITTALS

A. Submit PDF copies of operating instructions and maintenance manuals to Owner at time of Owner's instructions.

END OF SECTION

Dodgeville Public Library Contract Closeout 3757-004-00 - FF&E January 22, 2026 01700 - 1

SECTION 01700

CONTRACT CLOSEOUT

PART 1 - GENERAL

1.1 SUMMARY

A. This Section includes administrative and procedural requirements for contract closeout including, but not limited to, the following:

1. Inspection procedures.

2. Project record document submittal.

3. Operation and maintenance manual submittal.

4. Submittal of warranties.

5. Final cleaning.

1.2 SUBMITTALS

A. Preliminary Procedures: Before requesting inspection for certification of Substantial Completion, complete the following. List exceptions in the request.

1. In the Application for Payment that coincides with, or first follows, the date Substantial Completion is claimed, show 100 percent completion for the portion of the Work claimed as substantially complete.

a. Include supporting documentation for completion as indicated in these Contract Documents and a statement showing an accounting of changes to the Contract Sum.

b. If 100 percent completion cannot be shown, include a list of incomplete items, the value of incomplete construction, and reasons the Work is not complete.

2. Submit specific warranties, workmanship bonds, maintenance agreements, final certifications, and similar documents.

3. Submit record drawings, maintenance manuals, final project photographs, damage or settlement surveys, and similar final record information.

4. Deliver tools, spare parts, extra stock, and similar items.

5. Make final changeover of permanent locks and transmit keys to the Owner.

6. Discontinue and remove temporary facilities from the site, along with mockups, construction tools, and similar elements.

7. Complete final cleanup requirements, including touch up painting.

B. Inspection Procedures: On receipt of a request for inspection, the Architect will either proceed with inspection or advise the Contractor of unfilled requirements. The Architect will prepare the Certificate of Substantial Completion following inspection or advise the Contractor of installation that must be completed or corrected before the certificate will be issued.

1. The Architect will repeat inspection when requested and assured that the Work is substantially complete.

2. Results of the completed inspection will form the basis of requirements for final acceptance.

1.3 RECORD DOCUMENT SUBMITTALS:

A. Record Drawings, Specifications and Product Data: Maintain one complete copy of the Project Manual, including Addenda. Include with the Project Manual one copy of other written construction documents, such as Change Orders and modifications issued in printed form during construction.

1. Mark these documents to show substantial variations in actual Work performed in comparison with the text of the Specifications and modifications.

2. Give particular attention to substitutions and selection of options and information on concealed construction that cannot otherwise be readily discerned later by direct observation.

3. Note related record drawing information and Product Data.

4. Upon completion of the Work, submit record Specifications to the Architect for the Owner’s records.

B. Record Product Data: Maintain one copy of each Product Data submittal. Note related Change Orders and markup of record drawings and Specifications.

Dodgeville Public Library Contract Closeout

3757-004-00 - FF&E 01700 - 2

C. Maintenance Manuals: Organize operation and maintenance data into suitable sets of manageable size. Combine properly indexed data in a digital PDF file. Include the following types of information:

1. Emergency instructions.

2. Spare parts list.

3. Copies of warranties.

4. Wiring diagrams.

5. Cleaning.

6. Inspection procedures.

7. Shop Drawings and Product Data.

8. Record documents.

9. Maintenance agreements and similar continuing commitments.

PART 2 - PRODUCTS

Not applicable.

PART 3 – EXECUTION

3.1 FINAL CLEANING

A. General: The General Conditions require general cleaning during construction.

B. Cleaning: Employ experienced workers or professional cleaners for final cleaning. Clean each surface or unit to the condition expected in a normal, commercial building cleaning and maintenance program. Comply with manufacturers’ instructions.

1. Complete the following cleaning operations before requesting inspection for certification of Substantial Completion.

a. Remove labels that are not permanent labels.

b. Clean transparent materials, including mirrors and glass. Remove glazing compounds and other substances that are noticeable vision-obscuring materials. Replace chipped or broken glass and other damaged transparent materials.

c. Clean exposed exterior and interior hard-surfaced finishes to a dust-free condition, free of stains, films, and similar foreign substances. Restore reflective surfaces to their original condition. Vacuum carpeted surfaces.

C. Compliance: Comply with regulations of authorities having jurisdiction and with safety standards for cleaning. Do not burn waste materials. Do not bury debris or excess materials on the Owner’s property. Do not discharge volatile, harmful, or dangerous materials into drainage systems.

Remove waste materials from the site and dispose of lawfully.

1. Where extra materials of value remain after completion of associated Work, they become the Owner’s property. Dispose of these materials as directed by the Owner.

End of Section

Dodgeville Public Library Warranties 3757-004-00 - FF&E January 22, 2026 01740 - 1

SECTION 01740

WARRANTIES

PART 1 - GENERAL

1.1 SUMMARY

A. This Section includes administrative and procedural requirements for warranties required by the Contract Documents, including manufacturers’ standard warranties on products and special warranties.

B. Disclaimers and Limitations: Manufacturers’ disclaimers and limitations on product warranties do not relieve the Contractor of the warranty on the Work that incorporates the products.

1.2 WARRANTY REQUIREMENTS

A. Related Damages and Losses: When correcting failed or damaged warranted products, remove and replace products that have been damaged as a result of such failure or that must be removed and replaced to provide access for correction of warranted construction.

B. Reinstatement of Warranty: When Work covered by a warranty has failed and been corrected by replacement or rebuilding, reinstate the warranty by written endorsement. The reinstated warranty shall be equal to the original warranty with an equitable adjustment for depreciation.

C. Replacement Cost: Upon determination that Work covered by a warranty has failed, replace or rebuild the Work to an acceptable condition complying with requirements of the Contract Documents. The Contractor is responsible for the cost of replacing or rebuilding defective Work regardless of whether the Owner has benefited from use of the Work through a portion o its anticipated useful service life.

D. Owner’s Recourse: Expressed warranties made to the Owner are in addition to implied warranties and shall not limit the duties, obligations, rights, and remedies otherwise available under the law.

Expressed warranty periods shall not be interpreted as limitations on the time in which the Owner can enforce such other duties, obligations, rights, or remedies.

1. Rejection of Warranties: The Owner reserves the right to reject warranties and to limit selection to products with warranties not in conflict with requirements of the Contract Documents.

1.3 SUBMITTALS

A. Submit written warranties to the Architect prior to the date certified for Substantial Completion. If the Architect’s Certificate of Substantial Completion designates a commencement date for warranties other than the date of Substantial Completion for the Work, or a designated portion of the Work, submit written warranties upon request of the Architect.

1. When a designated portion of the Work is completed and occupied or used by the Owner, by separate agreement with the Contractor during the construction period, submit properly executed warranties to the Architect within 15 days of completion of that designated portion of the Work.

B. Form of Submittal: At Final Completion, compile 3 digital copies of each required warranty properly executed by the Contractor, subcontractor, supplier or manufacturer. Organize the warranty documents into an orderly sequence based on the table of contents of the Project Manual.

1. Combine properly indexed data in a digital PDF file.

PART 2 – PRODUCTS

Not applicable.

PART 3 – EXECUTION

Not applicable.

Dodgeville Public Library Warranties

3757-004-00 - FF&E 01740 - 2

End of Section

Dodgeville Public Library Library Furnishings 3757-004-00 - FF&E January 22, 2026 12600 - 1

SECTION 12600

LIBRARY FURNISHINGS & EQUIPMENT

PART 1 - GENERAL

1.1 SUMMARY

A. Section includes Library Furnishings & Equipment.

B. Base Bid

1. Provide all labor, equipment and materials necessary for and incidental to the completion of delivery and installation of new furniture and movable equipment, in the quantities and configurations as shown on the documents. Items include, but are not limited to, the following:

a. Children’s Chairs

b. Lounge Chairs

c. Barstools

d. Laptop Tables

e. Ottomans & Benches

C. See drawings and schedules for location and extent of work.

D. Alternate Bids:

1. None.

1.2 GENERAL REQUIREMENTS

A. Manufacturers shall certify test results for flammability, abrasion, static electricity, contribution for all upholstery fabrics.

B. Installation of new furnishings and equipment shall be coordinated with Architect. Installation to be complete before August 31st, 2026. Specific date in August to be determined by Iowa County.

C. Manufacturers to provide the option for Iowa County to procure additional furniture pieces as needed at the same unit price provided in this package.

1.3 SUBMITTALS

A. All submittals are to be made in accordance with the requirements of Section 01330.

B. Product data for each type of product and process specified and incorporated into furnishings and equipment or architectural woodwork during fabrication, finishing, and installation.

C. Samples for initial selection of the following in the form of manufacturer's color charts consisting of actual units or sections of units showing the full range of colors, textures, and patterns available for each type of material indicated.

1. Shop-applied transparent finishes.

2. Plastic laminates

D. Samples for verification of the following:

1. Samples of plastic laminates.

2. Samples of all upholstery fabrics & mesh.

3. Samples of wood stains.

4. Samples of steel finishes.

5. Samples of polypropylene finishes.

E. Qualification data for firms and persons specified in the "Quality Assurance" Article to demonstrate their capabilities and experience. Include list of completed projects with project names and addresses, names and addresses of architects and owners, and other information specified.

F. Verify all C.O.M. yardages.

3757-004-00 - FF&E 12600 - 2

G. Provide manufacturer's written instructions for proper maintenance of fabrics, finishes and furnishings.

H. Warranty:

1. Provide Table of Contents in a combined PDF file.

2. Submit prior to final application for payment.

3. For items of work delayed beyond date of substantial completion, provide updated submittal within ten days after acceptance, listing date of acceptance as start of warranty period.

1.4 QUALITY ASSURANCE

A. Fabricator Qualifications: firm experienced in providing furnishings, equipment and architectural woodwork similar to that indicated for this Project and with a record of successful in-service performance, as well as sufficient production capacity to produce required units without the Work.

B. Quality Standard: Except as otherwise indicated, comply with the following standard:

1. AWI Quality Standard: “Architectural Woodwork Quality Standards” of the Architectural Woodwork Institute for grades of interior architectural woodwork, construction, finishes, and other requirements.

2. The Contract Documents contain selections chosen from options in the Quality Standard as well as additional requirements beyond those of the Quality Standard. Comply with such selections and requirements in addition to the Quality Standard.

C. Fire-Test-Response Characteristics: Provide materials with the following fire-test-response characteristics as determined by testing identical products per ASTM test method indicated below by ULI. Identify fire-retardant-treated material with appropriate markings of applicable testing and inspecting agency in the form of separable paper label or, where required by authorities having jurisdiction, imprint on surfaces of materials that will be concealed from view after installation.

1. Surface-Burning Characteristics: not exceeding values indicated below, tested per ASTM E 84 for standard time period (10 minutes).

a. Flame Spread: 75.

b. Smoke Developed: 450.

D. Only dealers authorized by the manufacturer with a minimum of three years documented experience in the installation of scheduled components shall be acceptable.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Protect furnishings, equipment and woodwork during transit, delivery, storage, and handling to prevent damage, soilage, and deterioration.

B. Dealership to unwrap furniture from Manufacturer’s packaging and allow furniture to off-gas in clean warehouse space for at least one week. After a week, furniture shall be blanket-wrapped to prevent damage and be delivered to the jobsite when conditions outlined below have been met.

C. Do not deliver furnishings, equipment and woodwork until painting and similar operations that could damage, soil, or deteriorate quality of furnishings, equipment and woodwork items have been completed in installation areas. If furnishings, equipment woodwork must be stored in other than installation areas, store only in areas whose environmental conditions meet requirements specified ”Project Conditions.”

1.6 PROJECT CONDITIONS

A. Environmental Limitations: Do not deliver or install furnishings, equipment and woodwork until building is enclosed, wet-work is completed, and HVAC system is operating and will maintain temperature and relative humidity at occupancy levels during the remainder of the construction period.

3757-004-00 - FF&E 12600 - 3

B. Environmental Limitations: Obtain and comply with furnishings, equipment and woodwork fabricator’s and Installer’s coordinated advice for optimum temperature and humidity conditions for furnishings, equipment and woodwork during its storage and installation. Do not install furnishings, equipment and woodwork until these conditions have been attained and stabilized so that furnishings, equipment and woodwork will be within plus or minus 1.0 percent of optimum moisture content from date of installation through remainder of construction period.

C. Field Measurements: Where furnishings, equipment and woodwork is indicated to be fitted to other construction, check actual dimensions of other construction by accurate field measurements before fabrication, and show recorded measurements on final shop drawings. Coordinate fabrication schedule with construction progress to avoid delaying the Work.

PART 2 - PRODUCTS

2.1 PRODUCTS AND MANUFACTURERS

A. Manufacturers and Products specified established the minimum level of performance required, including interconnectivity of electrical components.

B. Furnishings specified are selected from the following manufacturers (listed alphabetically).

1. Manufacturer: Kimball International Rep: Heather Olver Telephone: 262-303-6559 Email: Heather.Olver@KimballInternational.com

2. Manufacturer: Integra Rep: Jenny Crubaugh (J Cru Contract Furnishings) Telephone: 608-535-0370 Email: Jcrucontract@gmail.com

3. Manufacturer: Bernhardt Rep: Kristin Peschke (AK Design) Telephone: 312-961-4177 Email: kristin@akdesign.space

4. Manufacturer: Camira Rep: Kristin Peschke (AK Design) Telephone: 312-961-4177 Email: kristin@akdesign.space

5. Manufacturer: Source International Rep: Angela Ryun (Level Reps) Telephone: 414-731-7553 Email: Angela@levelreps.com

6. Manufacturer: Enwork Rep: Angela Ryun (Level Reps) Telephone: 414-731-7553 Email: Angela@levelreps.com

7. Manufacturer: Arcadia Rep: Angela Ryun (Level Reps) Telephone: 414-731-7553 Email: Angela@levelreps.com

8. Manufacturer: Nevins Rep: Christine Alberg (Alberg LLC) Telephone: 612-308-5991 Email: christine@alberg.co

3757-004-00 - FF&E 12600 - 4

9. Manufacturer: Leland Rep: Michele Aubry (Sheridan Contract) Telephone: 414-331-0359 Email: maubry@sheridancontract.com

10. Manufacturer: Stylex Rep: Alyssia Magnuson (Two Point) Telephone: 715-271-3069 Email: alyssia@twopoint.co

11. Manufacturer: Watson Rep: Stephanie Stack (Stack Brogan Collective) Telephone: 312-330-0292 Email: stephanie@stackbrogan.com

12. Manufacturer: Martin Brattrud Rep: Stephanie Stack (Stack Brogan Collective) Telephone: 312-330-0292 Email: stephanie@stackbrogan.com

13. Manufacturer: TMC Rep: Christina Kirwin Telephone: 734-622-0080 Email: Christina@tmcfurniture.com

14. Manufacturer: OFS Rep: Laura Bush Telephone: 262-455-1408 Email: lbush@ofs.com

15. Manufacturer: SitOnIt Rep: Michele Smith (MT Cottick) Telephone: 608-843-0263 Email: michele@mtcottick.com

16. Manufacturer: Media Technologies Rep: Lauren Sheahan Telephone: 231-923-3308 Email: lsheahan@mediatechnologies.com

17. Manufacturer: SouthPaw Rep: Bonnie Mikesell Telephone: 800-228-1698 ext. 4381 Email: bonnie@southpaw.com

18. Manufacturer: Maharam Rep: Cara McDonough Telephone: 414-458-8144 Email: cmcdonough@maharam.com

19. Manufacturer: Designtex Rep: Tricia Wollersheim Telephone: 720-274-6004 Email: twollersheim@designtex.com

3757-004-00 - FF&E 12600 - 5

20. Manufacturer: Knoll Textiles Rep: Cara McDonough Telephone: 414-458-8144 Email: cmcdonough@maharam.com

21. Manufacturer:

Rep:

Telephone:

Email:

Momentum Textiles & Wallcovering Jamie Cooper 262-606-9241 Jcooper@momtex.com

22. Manufacturer:

Rep:

Telephone:

Email:

CF Stinson Sara Carlson 612-554-2279 scarlson@cfstinson.com

2.2 COM FABRICS AND MANUFACTURERS

A. Manufacturers and Products specified established minimum level of performance required.

PART 3 - EXECUTION

3.1 INSTALLATION

A. Install all pieces in configuration shown on the drawings.

B. Install all pieces level and plumb.

3.2 SCHEDULE

A. Provide all work as described in the following schedule.

KEY

Manufacturer Furniture Code(s)

Kimball International LC-4, LC-8 Integra LC-5 Bernhardt LC-6a, LC-6b Source International LC-7 Enwork L-1, T-12, T-13 Nevins B-6 Leland CH-4a, CH-4b, T-3, OTT-1a, OTT-1b, OTT-1c, OTT-2a, OTT-2b, CH-7 Stylex CH-6a, CH-6b Watson T-2 Arcadia T-6 Martin Brattrud OTT-5a, OTT-5b

TMC PL-1, PL-2

OFS B-1a, B-1b, B-2, OTT-6 SitOnIt CH-1a, CH-1b, CH-2a, CH-2b, CH-2c, CH-3, CH-5a, CH-5b, OTT-3, OTT-4

MediaTechnologies D-1 Southpaw PL-3

LC-8

UP

FRIENDS OF

THE LIBRARY

MIDDLE GRADE

& MEDIA

MAINTENANCE

ROOM

MECHANICAL

ROOM

STORYTIME

VESTIBULE

CHILDREN'S

PLAY

106A

STORAGE

TOILET

TOILET

ST-1

STAIR

ELV

ELEVATOR

110D

ELEV EQUIP

ROOM

110B

BOILER ROOM

110C

JC

CORR.

CHILDRENS

OFFICE

ELECTRICAL

ROOM

110A

STORAGE

OFFICE

TOILET

117A

BOOK DROP

CHILDREN'S

COLLECTION

LC-1

LC-1

LC-1

LC-1

T-3T-3 T-3

T-2 T-2

CH-1a

CH-1a

T-b

OTT-4 OTT-4

B- 1a

OTT-1a

OTT-2a

OTT-1a

OTT-2a

CH-1a

T-3

B-4aB-4bB-4bB-4a

B-5B-5

B-3B-3

B-4b

B-5

CH-4a

CH-4a

CH-4b

CH-4b

CH-4b

CH-4bCH-4b

CH-4b

CH-4a

CH-4a

CH-4a

CH-4a

CH-7

CH-7

CH-2b

CH-2b

OTT-3 OTT-3

PL-2PL-1

WS-1a

WS-1b F-

PL-3

ST-1

ST-1

HGA NO:

DATE:

CIVIL ENGINEER

LANDSCAPE ARCHITECT

STRUCTURAL ENGINEER

MECHANICAL/ELECTRICAL/

PLUMBING ENGINEER

NO DESCRIPTION DATE

DODGEVILLE

PUBLIC

LIBRARY -

RENOVATION

139 S IOWA ST,

DODGEVILLE, WI. 53533

© COPYRIGHT HAMMEL, GREEN AND ABRAHAMSON, INC.

ISSUANCE HISTORY - THIS SHEET

CONSTRUCTION DOCUMENTS

MARCH 21, 2025

3757-004-00

/2 2/

:2 2:

P

M A u to d es k D oc s:

//D od ge vi lle -P ub lic

-L ib ra ry

-0

-0 0/

A

4- D o d ge vi lle L ib ra ry _3

-0

4-

.r vt

A283

FURNITURE

PLAN - LOWER

LEVEL

A ut ho r

FOR REFERENCE ONLY

1/8" = 1'-0"1

FURNITURE PLAN -LOWER LEVEL (TAGGED)

JANUARY 22, 2026

R E

F

R E

F M

W

DN

DN

ADULT

MARKETPLACE

201B

CORR.

LOBBY

VESTIBULE

201A

BOOK DROP

COMMUNITY

ROOM

202A

STORAGE

207A

LOCAL

HISTORY

WOMENS

MENS

LARGE

MEETING

BREAK ROOM215

SORTING &

DELIVERIES

207E

CORR.

ST-1

STAIR

ELV

ELEVATOR

SMALL

MEETING

TELEHEALTH

TELEHEALTH

STUDY

STUDY

209A

STORAGE

WORKROOM

DIRECTOR'S

OFFICE

207B

BUSINESS

CENTER

INFO

COMMONS

207D

YOUNG ADULT

STAFF TOILET

WELLNESS

DESK

H U

TC

H

FL

A

G

OPEN TO BELOW

PR

O

JE

C

TI

O

N

SC

R

EE

N

LC-3C LC-3C

LC-3C LC-3C

LC-5 LC-5 LC-5 LC-5 LC-5 LC-5

LC-6b

LC-6a

LC-3aLC-3a LC-3b

LC-3bLC-3b

LC-3b

LC-3a

LC-3a

OTT-6 OTT-6 OTT-6

CH-6b

CH-6b

CH-6b

CH-5b

LC-8 LC-8

LC-8

T-8a

T-4a

T-4a

T-7T-7

T-7 T-7

T-10a

T-10a

CH-3

T-2

T-8b

T-8b

LC-2

LC-2

LC-2

LC-2

LC-6b

B-1a

B-2

B-2

B-2

B-2 B-2

B-2

T-4a

T-4b

B-6 B-6

T-4b

T-4b

T-4b

LC-4LC-4

T-6

CH-1b

CH-1b

CH-2a

CH-6b

CH-2aCH-2a

CH-6a

CH-6a CH-6a

LC-6a

T-9 T-9

T-5a T-5a

T-5a T-5a

T-5a

T-5b

T-5b

T-6T-6

T-6

T-5a

T-7

T-8b

T-7

T-7 T-7

T-2

T-11 T-12

T-13

T-5a

T-5a

T-11

T-

T-

B-1a

CH-5a

CH-2b

T-14

B-1b

B-1b

T-5b

T-5b

OTT-2a

LC-7

LC-7

LC-7

OTT-1b

OTT-1cOTT-1c

OTT-2a

OTT-1b

OTT-2b

OTT-2b

OTT-5a

OTT-5b

CH-2a

(QTY: 18)

L-1

CH-1a

CH-1a

CH-1a

CH-1a CH-1a

CH-1a

CH-1a

CH-1a

CH-2c

D-1D-1 WS-2b

WS-2a

F-1

(QTY: 95)

CH-5a CH-5a

CH-5a

CH-5a CH-5a

CH-5a CH-5a

(QTY: 4)

(QTY: 4)

(QTY: 4)

(QTY: 4)

(QTY: 6)

(QTY: 6)

CH-5b

(QTY: 6)

(QTY: 18)

(QTY: 10)

(QTY: 3)

(QTY: 3)

(QTY: 2)

(QTY: 2)

(QTY: 4)

WS-1c

WS-3

HGA NO:

DATE:

CIVIL ENGINEER

LANDSCAPE ARCHITECT

STRUCTURAL ENGINEER

MECHANICAL/ELECTRICAL/

PLUMBING ENGINEER

NO DESCRIPTION DATE

DODGEVILLE

PUBLIC

LIBRARY -

RENOVATION

139 S IOWA ST,

DODGEVILLE, WI. 53533

© COPYRIGHT HAMMEL, GREEN AND ABRAHAMSON, INC.

ISSUANCE HISTORY - THIS SHEET

CONSTRUCTION DOCUMENTS

MARCH 21, 2025

3757-004-00

/2 2/

:2 2:

P

M A u to d es k D oc s:

//D od ge vi lle -P ub lic

-L ib ra ry

-0

-0 0/

A

4- D o d ge vi lle L ib ra ry _3

-0

4-

.r vt

A284

FURNITURE

PLAN - MAIN

LEVEL

A ut ho r

FOR REFERENCE ONLY

1/8" = 1'-0"1

FURNITURE PLAN - MAIN LEVEL (TAGGED)

JANUARY 22, 2026

FURNITURE SPECIFICATIONS

Location: Dodgeville, WI

Project No: 3757-004-00

Furniture Code: LC-5

Furniture Description: LOUNGE CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

INTEGRA SUMMIT LOUNGE CHAIR

Swivel Lounge Chair

Model: SMB3 Qty Location

Size: 28"W x 28"H x 30.5"D 6 Info Commons 207

Finish:

Base: Powder Coat - Color: Bark

Back Upholstery: Designtex, Hillside, Terracotta (Grade T)

Seat Upholstery: Maharam, Lariat, Auburn (Grade R)

Details:

Seat Back

Project: DODGEVILLE PUBLIC LIBRARY

Back Seat

Project No: 3757-004-00

Furniture Code: LC-6a

Furniture Description: LOUNGE CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

BERNHARDT MITT LOUNGE CHAIR

Armless Lounge Chair with Handle

Model: N/A Qty Location

Size: 33.5"W x 33.5"D x 32"H 2 Young Adult 207D

Finish:

Upholstery: Maharam, Merit, 015 Aegean

Upholstered Handle: Maharam, Apt, Color: Botanic, 100% Polyurethane/Silicone

Thread Color: 7LJ - 5395C, Blue

Details:

Project No: 3757-004-00

Furniture Code: LC-6b

Furniture Description: LOUNGE CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

BERNHARDT MITT LOUNGE CHAIR

Armless Lounge Chair with Handle

Model: N/A Qty Location

Size: 33.5"W x 33.5"D x 32"H 2 Young Adult 207D

Finish:

Upholstery: Camira, Synergy, Color: Group

Upholstered Handle: Maharam, Apt, Botanic, 100% Polyurethane/Silicone

Thread Color: 7LJ - 5395C, Blue

Project No: 3757-004-00

Furniture Code: LC-7

Furniture Description: LOUNGE CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SOURCE INTERNATIONAL LAZE LOUNGE CHAIR

Model: Qty Location

Size: 3 Young Adult 207D

Finish:

Base:

Upholstery:

Lounge Chair with Sled Base

600-SRC

25.5"W x 33.25"D x 27.5"H

Chrome Sled Base - CHR Kvadrat, Sonar 3, Color: 0673 (Textile: Pending Final Selection & Approval)

Project No: 3757-004-00

Furniture Code: LC-8

Furniture Description: LOUNGE CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

KIMBALL INTERNATIONAL IDARA LOUNGE CHAIR

Mid-Back Lounge Chair with 4-Prong Metal Base

Model: N83GM4LM Qty Location

Size: 32 1/4"W x 32 3/4"D x 28 3/4"H (Mid) 1 Wellness Room 216

Finish: 2 Break Room 213

Base: Low Profile, Black

Upholstery: Momentum, Silica Suede, Color: Desert, 70% Polyurethane /

PVC Free, 30% Silicone

Project No: 3757-004-00

Furniture Code: L-1

Furniture Description: LECTERN photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

ENWORK ZORI LECTERN

26"Dx29"W Lectern w/ Back Panel

Model: XCYL3FC-055 Qty Location

Size:

26"D x 29"W top, 33"W overall (including casters) 1

Community Room

Base: Accent Foot Trim - Standard Foot

Finish: Laminate, Formica Ceruse Gray Walnut

Frame/Casters - Black - BL

Power: Cutout in Top for Axil Power unit (PDAC21), Cable Routing To

Floor

Axil In-Surface, 2 Power/1 USB A+C, 10' Power

Cord (No Convenience Outlet)

Details: Inlcude routing hole in the leg for the power cord to feed through and run out the bottom

Project No: 3757-004-00

Furniture Code: B-1a

Furniture Description: BENCH photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

OFS COACT LITE BENCH

Triple Bench - Backless

Model: 207040 Qty Location

Size: 67.5"W x 18"H x 26"D 1 Lobby 201

Finish: 1 Vestibule 100

Base: Power Coat Leg, Color: Ion (Super Matte)

Upholstery: CF Stinson, Tessuto 2.0, Color: Strada

Project No: 3757-004-00

Furniture Code: B-1b

Furniture Description: BENCH photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

OFS COACT LITE BENCH

Triple Bench - Backless

Model: 207040 Qty Location

Size:

67.5"W x 18"H x 26"D 2

Community Room

Finish:

Base: Power Coat Leg, Color: Ion (Super Matte)

Upholstery: Maharam, Kiln, Color: Picante

Project No: 3757-004-00

Furniture Code: B-2

Furniture Description: BENCH photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

OFS COACT LITE MID BACK BENCH

Loveseat Bench

Model: 207042-M-MT Qty Location

Size: 45"W x 34.75"H x 26"D, Seat Height: 18" 6 Adult 206

Finish:

Base: Power Coat Leg, Color: Ion (Super Matte)

Upholstery Back: Knoll Textiles, Kiln, Color: Yawl

Upholstery Seat: Momentum, Canter Epu, Color: Twilight

Project No: 3757-004-00

Furniture Code: B-6

Furniture Description: BENCH photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

NEVINS RITZ BENCH

Model: Qty Location

Size: 2 Large Meeting 217

Finish:

Base:

Upholstery:

55"W Bench

B20

18"H x 55"L x 20"D

Veneer, Graphite Walnut (WGW) Plastic Glides (Standard)

CF Stinson,Gabby, Color: Wave

Project No: 3757-004-00

Furniture Code: CH-1a

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SITONIT LUMIN CHAIR - CASTERS

4 Leg Chair - Upholestered Seat with Plastic Back (Casters)

Model: 33721 Qty Location

Size:

22.3"W x 22.1"D x 32.9"H, Seat Height: 17.3" 3

Children's Collection

Finish: 8 Info Commons 207

Shell: Plastic, Color: Apple - SC24

Seat Upholestry: Designtex, Alphabet, Color: Pistachio

Style:

Frame: Black - BL

Base: Four Leg with Caster Base, Black

Arm Style: Armless

Project No: 3757-004-00

Furniture Code: CH-1b

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SITONIT LUMIN CHAIR - CASTERS

4 Leg Chair - Upholestered Seat with Plastic Back (Casters)

Model: 33721 Qty Location

Size: 22.3"W x 22.1"D x 32.9"H, Seat Height: 17.3" 18 Large Meeting 217

Finish: 6 Small Meeting 218

Shell: Plastic, Color: Latte - SC20

Seat Upholestry: Designtex, Tour, Color: Saddle

Style:

Frame: Black - BL

Base: Four Leg with Caster Base, Black

Arm Style: Armless

Project No: 3757-004-00

Furniture Code: CH-2a

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SITONIT LUMIN CHAIR - 4 LEG

4 Leg Chair - Upholestered Seat with Plastic Back

Model: 33721 Qty Location

Size: 21.3"W x 22.1"D x 32.9"H, Seat Height: 17.3" 3 Telehealth 212

Finish: 3 Telehealth 219

Shell: Plastic, Color: Latte - SC20 2 Study 210

Seat Upholestry: Designtex, Tour, Color: Saddle 2 Study 211

Style:

Frame: Black - BL

Base: Four Leg Base

Standard Multi-Surface Glides, Black

Arm Style: Armless

Project No: 3757-004-00

Furniture Code: CH-2b

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SITONIT LUMIN CHAIR - 4 LEG

4 Leg Chair - Upholestered Seat with Plastic Back

Model: 33721 Qty Location

Size: 21.3"W x 22.1"D x 32.9"H, Seat Height: 17.3" 2 Directors Office 208

Finish: 2 Office 115

Shell: Plastic, Color: Latte - SC20 2 Office 116

Seat Upholestry: Momentum, Feltro, Color: Birch

Style:

Frame: Black - BL

Base: Four Leg Base

Standard Multi-Surface Glides, Black

Arm Style: Armless

Project No: 3757-004-00

Furniture Code: CH-2c

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SITONIT LUMIN CHAIR - 4 LEG

4 Leg Chair - Upholestered Seat with Plastic Back

Model: 33721 Qty Location

Size: 21.3"W x 22.1"D x 32.9"H, Seat Height: 17.3" 10 Info Commons

Finish:

Shell: Plastic, Color: Latte - SC20

Seat Upholestry: CF Stinson, Gabby, Color: Spice

Style:

Frame: Black - BL

Base: Four Leg Base

Standard Multi-Surface Glides, Black

Arm Style: Armless

Details:

Tangerine

Project No: 3757-004-00

Furniture Code: CH-3

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SITONIT LUMIN CHAIR - WIRE ROD

Sled Base Chair - Plastic Seat & Back

Model: 33721 Qty Location

Size:

21.3"W x 22.1"D x 32.9"H, Seat Height: 17.3" 95

Community Room

Finish:

Shell: Plastic, Color: Apple - SC24

Style:

Frame: Chrome - FC15

No Glide

Arm Style: Armless

Project No: 3757-004-00

Furniture Code: CH-4a

Furniture Description: CHAIR - CHILDRENS photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

LELAND QUINCE CHAIR

16” Children’s Chair - Wood Shell

Model: QC-SH16 Qty Location

Size: 16"W x 17"D x 27"H, Seat Height: 16" 4 Chilrens Play 117

Finish: 2 Storytime 106

Shell: Limelight - 33M (Plain Back)

Wood Base: Natural Maple - 11M

Nylon Glides (Standard)

Style:

Shell Style: Bump (BP)

Project No: 3757-004-00

Furniture Code: CH-4b

Furniture Description: CHAIR - CHILDRENS photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

LELAND QUINCE CHAIR

16” Children’s Chair -Wood Shell

Model: QC-SH16 Qty Location

Size: 16"W x 17"D x 27"H, Seat Height: 16" 4 Chilrens Play 117

Finish: 2 Storytime 106

Shell: Tangerine 40M (Plain Back)

Wood Base: Natural Maple - 11M

Nylon Glides (Standard)

Style:

Shell Style: Bump (BP)

Project No: 3757-004-00

Furniture Code: CH-5a

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SITONIT AXYS - COUNTER STOOL

Counter Height Stool (24")

Model: 2101 S9 Qty Location

Size: 18.5"W x 20"D x 35"H, Seat Height: 24.5" 8 Adult 206

Finish:

Upholstery: Designtex, Tour, Color: Bronze

Base: Charcoal - FC19

Style:

Base: Glides - GL9

Arm Style: Armless

Project No: 3757-004-00

Furniture Code: CH-5b

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

SITONIT AXYS - BAR STOOL

Bar Height Stool (30")

Model: 2101 S2 Qty Location

Size: 19.5"W x 22.25"D x 41"H, Seat Height: 30.25" 12 Young Adult 207D

Finish:

Upholstery: Camira, Mainline Flax, Color: Blackwall

Base: Charcoal - FC19

Style:

Base: Glides - GL9

Arm Style: Armless

Project No: 3757-004-00

Furniture Code: CH-6a

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

STYLEX VIRVE CHAIR

Plastic Shell Chair with Seat Pad

Model: VR111 Qty Location

Size: 18.7"W x 21.8"D x 33.1"H 8 Adult 206

Finish:

Shell: Plastic, Color: Sand (19)

Frame: Powder Coat, Color: Sand (SD)

Upholstery: Maharam, Manner, Color: Mirth

Style:

Base: Four Leg Steel (Non-Stacking)

Plastic Glides

Arm Style: Armless

Project No: 3757-004-00

Furniture Code: CH-6c

Furniture Description: CHAIR photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

STYLEX VIRVE CHAIR

Model: Qty Location

Size: 16 Busines Center 207b

Finish:

Shell:

Frame:

Upholstery:

Style:

Base:

Arm Style:

Plastic Shell Chair with Seat Pad

VR111

18.7"W x 21.8"D x 33.1"H

Plastic, Color: Dark Sage (20) Powder Coat, Color: Dark Sage (20) Maharam, Gemma Multi, Color: Courgette Reverse

Four Leg Steel (Non-Stacking) Plastic

Glides

Armless

Project No: 3757-004-00

Furniture Code: CH-7

Furniture Description: CHILDREN'S STOOL photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

LELAND HANDY STOOL

Polypropylene shell stool, upholstered seat onlay

Model: HYS-U Qty Location

Size: 16"W x 14.5"D x 18.25"H 4 Children's Play 117

Finish:

Shell: Plastic, Color: White (WT)

Upholstery: Maharam, Manner, Color: Oceanside

Project No: 3757-004-00

Furniture Code: D-1

Furniture Description: Mobile Display Shelf photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

Mediatechnologies 4-sided Highrise Mobile Display Mobile Display, 5-units high

Model: DS2424OC5-60-L-MOB Qty Location

Size: 24"W x 24"D x 60"H 2 Adult 206

Finish:

Outer Laminate: Classic White 459-59

PVC Edge Band: Designer White C100007

Inner Cubby Laminate:Denim 8822-58 F

Project No: 3757-004-00

Furniture Code: T-2

Furniture Description: Table photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

WATSON HAVEN LAPTOP TABLE

Side Table

Model: FLTL255 Qty Location

Size: 12"D x 22"W x 25"H 2 Young Adult 207D

Finish: 2 Children's Play 117

Top: Laminate, Wilsonart Beigewood 7850

Edge: Knife Edge, Clear Coat

Base/Frame: Powder Coat - Wallaby

Project No: 3757-004-00

Furniture Code: T-3

Furniture Description: Childrens Table photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

LELAND QUINCE TABLE

25"H Round Children's Table

Model: QCT-25H Qty Location

Size: 36"Dia, 25"H 2 Storytime 106

Finish: 1 Children's Play 117

Top: Laminate, Designer White Wilsonart - D354-60

Edge: Soft Vinyl Edge: 13/16" flat PVC - White (W)

Base: Veneer, Natural Maple - 11M

Project No: 3757-004-00

Furniture Code: T-6

Furniture Description: Table photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

ARCADIA RAVELLE TABLE

Occasional Round Table

Model: 2501.20.01.2718 Qty Location

Size: 27" Dia. x 18" H 4 Adult 206

Finish:

Top/Edge: Phantom Ecru Wilsonart, 8212K-28

Base: Phantom Ecru Wilsonart, 8212K-28

Project No: 3757-004-00

Furniture Code: T-12

Furniture Description: CONFERENCE TABLE photo shown for reference only photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

ENWORK FOUNDATION TABLE - RECTANGULAR

Rectangle-Shape Conference Table

Model: CR4284 (Top) and FDU3684 (Base) Qty Location

Top: Rectangle Top 42"D x 84"W, 29"H including 1-1/4" top (1-piece) 1 Small Meeting 218

Edge: Knife Edge, K-Std (all sides)

Base Foundation Panel Base Kit with Trough for 36/42"x 84" Rectangle

Tops

6" Base Width

8" Trough Height

Finish:

Top: Laminate - Formica Millennium Oak, 5887 - 26

Edge: Knife Edge - Formica Millennium Oak, 5887 - 26

Base/Troughs: Laminate - Formica Graphite, 837 - 58

Power: 1 Pwr/Data Cut-out (Centered)

Ellora B (PDECUS), 2 Power/1 Technology opening (HDMI)/1

USB A+C, 5" x 8" cutout

Connectivity - 10' Power Cord, Includes Convenience Outlet

Project No: 3757-004-00

Furniture Code: T-13

Furniture Description: CONFERENCE TABLE photo shown for reference only photo shown for reference only

333 East Erie St, Milwaukee, WI 53202

ENWORK FOUNDATION TABLE - BOAT

Boat-Shape Conference Table

Model: BT60216 (Top) and FDT60216 (Base) Qty Location

Top: Boat Top 60"D x 216"W, 29"H including 1-1/4" top (3-pieces) 1 Large Meeting 217

Edge: Knife Edge, K-Std (all sides)

Base Foundation Panel Base Kit with Trough for 60/66"x 216" Boat

6" Base Width

8" Trough Height

Finish:

Top: Laminate - Formica Millennium Oak, 5887 - 26

Edge: Knife Edge - Formica Millennium Oak, 5887 - 26

Base/Troughs: Laminate - Formica Graphite, 837 - 58

Power: 2 Pwr/Data Cut-outs (Between Outer Bases)

E…