N68335-26-R-1041-0002 MLG NLG Cycling Fixture Solicitation Amendment.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

FMS Requirement

Created On:

01 Jul 2026, 18:42 PM Greenwich Mean Time

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Section A - Solicitation/Contract Form

The following changes have been made:

INFORMATION FROM TO

Header only - Purchase Requisition Number

AMS00596277

Response Due Date 08 Jul 2026 15 Jul 2026

Miscellaneous text in this section has been modified to:

Amendment 0002

The purpose of this amendment is to:

1. Provide Drawing(s) 3909AS9999 Rev B, 6224lka148383sx, 4026AS524, and 4026AS525 in the Technical Drawing Package (TDP).

2. Extend the required response date/time to 15 July 2026 15:00 EDT.

All other terms and conditions remain in effect.

N6833526R10410002

Section C - Description/Specifications/Statement of Work

Miscellaneous text in this section has been modified to:

STATEMENT OF WORK

Competitive MLG/NLG Cycling Fixture ECP

FOR THE V-22 AIRCRAFT

1.0 SCOPE

This Statement of Work (SOW) establishes the tasks that must be performed by the contractor for the manufacture, assembly, inspection and delivery of Intermediate & Depot (I&D) Level Peculiar Support Equipment (PSE) kits for the V-22 Aircraft.

APPLICABLE DOCUMENTS

Drawing 3909AS9999, Rev B

Identification Plate Support Equipment

MIL-HDBK-61A Configuration Management Guidance

MIL-HDBK-781A

Reliability Test Methods, Plans, and Environments For Engineering Development, Qualification and Production

MIL-STD-2073-1E Standard Practice for Military Packaging

MIL-STD-129R Military Marking for Shipment and Storage

MIL-STD-130 Identification Marking of U.S. Military Property

DFARS Clause 252.204-

Safeguarding Covered Defense Information and Cyber Incident Reporting

Drawing

6223LKA148382SX

SEC 6223 Kit Cycling Fixture

Drawing 4026AS333 Valve-Stack, NLG/MLG, Test-Stand, V-22

Drawing 901-236-015 TDP 901-236-015S01_C through 901-236-015S23_C below

901-236-015S01_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S02_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S03_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S04_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S05_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S06_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S07_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S08_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S09_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S10_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S11_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S12_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S13_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S14_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S15_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S16_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S17_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S18_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S19_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S20_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S21_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S22_C, Rev C Fixture, Cycling MLG/NLG Test

901-236-015S23_C, Rev C Fixture, Cycling MLG/NLG Test

Drawing 6224lka148383sx SEC 6224 Kit Servicing Panel

Drawing 4026AS524 Identification Tag Hydraulic Servicing Panel System

Drawing 4026AS525 Service Panel Plate Assembly

2.0 REQUIREMENTS

2.1 General

The contractor shall provide materials and services as required to manufacture/procure, assemble, inspect and deliver I&D PSE kits in accordance with their respective Government furnished drawing packages as called out below:

CLIN Platform Kit Drawing # Kit in Support of Quantity

0001 CMV 6223LKA148382SX Test Set, Hydraulic System, MLG/NLG 3

0002 V-22 FMS 6223LKA148382SX Test Set, Hydraulic System, MLG/NLG 1

0003 MV-22 6223LKA148382SX Test Set, Hydraulic System, MLG/NLG 9

0004 CV-22 6223LKA148382SX Test Set, Hydraulic System, MLG/NLG 3

0005 CMV 6224LKA148383SX Panel, Hydraulic Servicing 3

0006 V-22 FMS 6224LKA148383SX Panel, Hydraulic Servicing 1

0007 MV-22 6224LKA148383SX Panel, Hydraulic Servicing 10

0008 CV-22 6224LKA148383SX Panel, Hydraulic Servicing 3

2.2 Production Deliveries

2.2.1 Technical POC (TPOC) Inspections

The contractor shall notify the NAVAIR TPOC a minimum of thirty (30) days prior to planned shipment with the opportunity to inspect. This will be at the discretion of the government, to ensure continued compliance with the drawings and requirements of the contract.

2.2.2 Production Deliveries

Final Inspection shall be performed at Origin by DCMA. Acceptance of all production units shall be performed at Destination- N68335 NAWCAD Lakehurst, NJ. The required delivery for all CLINs is 6 months after contract award.

2.3 Data Deliverables

All deliverable data items shall be provided in accordance with this SOW and Contract Data Requirements List (CDRL), Form DD1423, Exhibit A, A001 and A002.

2.3.1 Request for Variance (RFV) and Engineering Change Proposal (ECP)

When identified, the contractor shall submit to the government for approval recommendations for Request for Variance, Exhibit A CDRL A001 and Engineering Change Proposal, Exhibit A, CDRL A002. The contractor is advised to consult MIL-HDBK-61 Configuration Management when contemplating submitting one of these configuration change requests. These change requests shall be prepared and submitted to the government IAW CDRLs A001 and A002.

2.4 Quality Assurance Program

The Contractor shall maintain a quality system that ensures that each I&D PSE end item is manufactured in accordance with the approved drawings.

The Contractor shall have an AS9100D Certification at the time of award and throughout the performance of the contract This will ensure that manufactured configuration items are built to print, functional, and reliably made IAW controlling technical drawings, specifications and standards.

Each item manufactured as part of this contract shall have passed a Government final inspection prior to DD-250.

2.5 Item Unique Identification (IUID) Marking of US Military Property

In accordance with DFARS Clause 252.211-7003 Item Identification and valuation, the contractor is required to mark and register all end items and their components meeting the requirements called out in latest version of MIL-STD-130 at time of contract award. These include components for which the Governments unit acquisition cost is $5,000 or greater, or any component, subassembly or embedded part that is serially managed, mission essential or a controlled inventory item.

2.5.1 Construct and Method

Details on creating the UID and the marking method are contained in MIL-STD-130N. The UID may be either UID Construct #1 or Construct #2 with Construct #2 being the preferred method.

2.5.2 UID Location and Marking

The locations and marking methods selected should bear no impact on the performance of the part and minimal configuration change(s) to the part.

The UID (including 2D Matrix) should be incorporated onto the data plate, in accordance with drawing 3909AS9999 Rev B. If the 2D matrix can't be incorporated onto the data plate, a 2D matrix sticker can be applied onto the main data plate provided it can be done without covering any critical data. When the 2D Data Matrix is placed directly onto the data plate, the Part Number, Serial Number and CAGE human readable characters are not required. If the above cannot be accomplished, a separate data plate can be attached which contains the 2D Matrix plus the human readable characters for the Part Number, Serial Number and CAGE. This added data plate should be attached in close proximity to the main data plate.

2.5.3 Permanency and Legibility

The UID marking and identification plates, tags, or labels when used on equipment, parts, assemblies, subassemblies, units, sets, or groups shall be permanent during the normal life expectancy of the item and be capable of withstanding the environmental test and cleaning procedures specified for the item. Legibility shall be as required for ready readability as per MIL-STD-130.

2.5.4 UID Registration

The prime contractor has the responsibility to furnish Item Unique Identification (IUID) data to the IUID registry. Data submission of IUID data and acquisition cost should be via Wide Area Work Flow (WAWF), IUID XML file, IUID flat file or web entry. Additional information regarding data submission as well as the actual marking can be found at .

2.5.5 Records

The contractor shall maintain an accurate, current list of UIDs for all manufactured items on this contract and supply to the government upon request.

The list shall include P/N, Serial #, CAGE, UID Location, Construct used, how it was marked and the registration method used.

3.0 Packaging, Handling, Storage and Transportation (PHS&T)

3.1 Packaging Requirements

The Contractor, and any subcontractors or vendors shall comply with best commercial practices for PHS&T procedures in the protection of sensitive electronic components from electrostatic discharge damage. The Contractor shall ensure that all unit, intermediate, and shipping containers are marked in compliance with recognized best commercial practices. The Contractor shall select the most economical mode of transportation for equipment, Support Equipment (SE) end items, spare and repair parts consistent with transportation priority, and required delivery dates. For items FOB destination basis, commercial bills of lading shall be used.

3.2 Marking

Marking shall be in accordance with MIL-STD-129R. Additionally, special marking labels (fragile, delicate, etc.) shall be applied to all unit, intermediate and shipping containers as an integral part of the total pack. The contractor shall select the appropriate special marking label (s) as additional means to protect the items during packaging, handling, storage, transit, and removal from the pack.

4.0 Cybersecurity Maturity Model Certification (CMMC) Program

Cybersecurity is a top priority for the Department of Defense (DoD). The defense industrial base (DIB) faces increasingly frequent and complex cyberattacks. To strengthen DIB cybersecurity and better safeguard DoD information, the DoD developed the Cybersecurity Maturity Model Certification (CMMC) Program to assess DoD cybersecurity requirements pertaining to Federal Contract Information (FCI) and Controlled Unclassified Information (CUI).

The items in this acquisition have been deemed to fall into CMMC Level 2 (Self) Assessment. CMMC Level 2 requires implementation of the 110 security requirements set forth in NIST SP 800-171 Rev. 2 to protect CUI in contractor information systems. Level 2 assessments are conducted every three years. CMMC Level 2 (Self) Assessment scores are entered by the OSA into SPRS

5.0 Shipment and Delivery

Note: Early delivery is encouraged and accepted by the Government at no additional cost.

5.1 Shipment and Delivery Information Domestic

Ship to DoDAAC and address:

DoDAAC: N68335 CountryCode: USA

CMV-22 Program (CLINs 0001, 0005) NAWCAD Lakehurst SE Staging Facility RT. 547, Hangar 1 Joint Base MDL, 08733 M/F: CMV-22 / RIC 5M2 / Mark For: Samantha Holland, 301-757-2041 FOB: Destination

MV-22 Program (CLINs 0003, 0007) NAWCAD Lakehurst SE Staging Facility RT. 547, Hangar 1 Joint Base MDL, 08733 M/F: MV-22 / RIC 5V2 / Mark For: George Dion, 732-323-7363 FOB: Destination

CV-22 Program (CLINs 0004, 0008) NAWCAD Lakehurst SE Staging Facility RT. 547, Hangar 1 Joint Base MDL, 08733 M/F: CV-22 / RIC 5C2 / Mark For: Samantha Holland, 301-757-2041 FOB: Destination

5.2 FMS Shipment and Delivery Information

Ship to DoDAAC and address:

DoDAAC: N68335 CountryCode: USA

V-22 FMS Japan Program (CLINs 0002, 0006) NAWCAD Lakehurst SE Staging Facility RT. 547, Hangar 1 Joint Base MDL, 08733 M/F: V-22 JAPAN / RIC 52M / Mark For: Leanna Lawlor, 732-323-7445 FOB: Origin (Shipping Point)

Delivery POC Leanna Lawlor Email: leanna.m.lawlor.civ@us.navy.mil

CLINs 0002 and 0006 FMS Case Code: JA-P-QDR

RSN: 006

PLDI: 6A00

MILSTRIP: Kit to upgrade the MLG/NLG Hydraulic System Test Set, PJAB2402256033, Kit to upgrade the Hydraulic Servicing Panel, PJAB2402256034

SUPADDL BAQQDR

SHIP TO: N68335

MARK FOR: N68335

TAC: No TAC Required Delivery Term Code (DTC): 2

6.0 POINTS OF CONTACT

Acquisition Point of Contact:

Jo Ann Wright Naval Air Warfare Center, Aircraft Division Highway 547, Bldg 149 FL 2 Lakehurst, NJ 08733-5104 Telephone: (732) 323-4102 or DSN 624-4102 E-Mail Address: joann.p.wright.civ@us.navy.mil

Technical Point of Contact:

Maxim Lazoutchenkov

Naval Air Warfare Center, Aircraft Division Highway 547, Lakehurst, NJ 08733-5104

(732) 323-7284 or DSN 624-7284 E-Mail Address: maxim.lazoutchenkov.civ@us.navy.mil

LKE. JB MDL, BLDG 271 HIGHWAY 547

JOINT BASE MDL, NJ 08733

UNITED STATES

Kyle Welge, Email: kyle.a.welge.civ@us.navy.mil Telephone: 2405879015 AdminBy:

SCD: PAS: