N6660427Q0014.pdf

This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in FAR Part 12 Acquisition of Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The request for Quotation (RFQ) number is N6660427Q0014

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) requires the Firm Fixed Price (FFP) procurement of Modular Roller Tracks and associated hardware, meeting required Government Technical Specifications contained herein.

This requirement is being solicited as a 100% small business set aside, as concurred with by the NUWCDIVNPT Office of Small Business Programs (OSBP). The North American Industry Classification System (NAICS) Code for this acquisition is 333922 Conveyor and Conveying Equipment Manufacturing. The Small Business Size Standard is 500 Employees. The PSC Code is 3910 Conveyors.

Required Delivery is F.O.B. Destination, Newport, RI, with a lead time no greater than 12 weeks after receipt of order. Offerors shall provide a lead time within the quotation.

Technical Specifications:

1. Flange & Guide Rail Configuration

1.1. Dual Side Retention: Roller tracks must feature integral side flanges (guide rails) on both sides to constrain product travel.

1.2. Modular Assembly Permitted: A cohesive assembly consisting of a single track segment with flanges on each side, OR single-flanged interlocking modular sections mechanically joined to form a unified, dual-flanged channel are both fully acceptable.

1.3. Flange Clearance: Flanges must extend sufficiently above the roller surface to ensure reliable lateral containment of transported material.

2. Width Specifications

2.1. Usable Conveyance Width: A minimum clear width of 2.0 inches (50.8 mm) between the inside faces of opposing flanges is required across all shelf fit scenarios

3. Modular Length & Splicing Performance

3.1. Segment Lengths: Individual manufactured track sections must be modular and measure between

6.0 feet and 20.0 feet in length.

3.2. Continuous Splice Capability: Track segments must include compatible mechanical connectors, splices, or bridge brackets capable of joining segments into a continuous, rigid run of up to 200 feet without roller interruption, significant sag, or structural degradation.

3.3. Roller Pitch & Rotation: Rollers must rotate freely under standard gravity-feed or hand-push loads, with roller spacing (pitch) adequate to support continuous flow without material snagging.

4. Configuration and Quantity (Shelf Fitment Scenarios)

The Government requires the track configurations and quantities to fill Qty (6) shelves which are 1 foot in Width and 200ft in Length.

Because the total outer width of the quoted track assembly dictates how many functional tracks fit across the 12-inch shelf width, the solicitation establishes four target configuration tiers:

Scenario

Total Exterior Track Width

Usable Tracks per Shelf (12" Width)

Total Continuous Track Runs (6 Shelves)

Total Linear Footage Required

Option A (Optimal Density)

2.40 in. or less

5 tracks

30 runs (200 ft each)

6,000 linear ft

Option B (High

2.41 in. to 3.00 in.

4 tracks

24 runs (200 ft

4,800 linear ft

Option C (Standard

3.01 in. to 4.00 in.

3 tracks

18 runs (200 ft

3,600 linear ft

Option D (Minimum Acceptable)

4.01 in. to 6.00 in.

2 tracks

12 runs (200 ft

2,400 linear ft

NOTE: Offerors are explicitly permitted and encouraged to submit multiple/alternate quotes representing different configuration options (Options A through D) if they manufacture or distribute products with varying dimensional profiles.

Basis of Award

The Government will award a Firm-Fixed-Price contract resulting from this solicitation to the responsible Quoter whose quote represents the Best Value to the Government, price and other factors considered.

Pursuant to FAR 12.203(c)(2), the Government will conduct an evaluation of quotes based on the factors below. The Government reserves the right to select a higher-performing technical quote if the overall value of its technical features justifies any difference in price.

Evaluation Factors

1) Technical Factor — Track Density & Storage Capacity:

Highest Preference: Quotes delivering 5 roller tracks per shelf (Option A: 30 total 200-ft runs), providing maximum operational density and throughput.

Second Preference: Quotes delivering 4 roller tracks per shelf (Option B: 24 total 200-ft runs).

Third Preference: Quotes delivering 3 roller tracks per shelf (Option C: 18 total 200-ft runs).

Baseline / Lowest Acceptable Preference: Quotes delivering 2 roller tracks per shelf (Option D:

12 total 200-ft runs).

2) Cost/Price Factor — Total Evaluated Price:

Evaluated based on the complete turnkey cost to deliver all required track segments, splices, and mounting accessories for the evaluated configuration (inclusive of shipping).

Incorporated provisions and clauses are those in effect through the latest Federal Acquisition Circular (FAC). Full text of incorporated FAR/DFARS clauses and provisions may be accessed electronically at https://acquisition.gov/far.

The following FAR and DFARS provisions and clauses apply to this solicitation:

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.204-13 System for Award Management Maintenance 52.204-19 Incorporation by Reference of Representations and Certifications 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony

Conviction under any Federal Law 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services 52.212-2 Evaluation—Commercial Products and Commercial Services 52.212-4 Contract Terms and Conditions—Commercial Products and Commercial Services 52.219-28 Post-Award Small Business Program Representation 52.222-3 Convict Labor 52.222-36 Equal Opportunity for Workers with Disabilities 52.222-50 Combating Trafficking in Persons 52.232-1 Payments 52.232-33 Payment by Electronic Funds Transfer—System for Award Management 52.232-39 Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.233-1 Disputes 52.233-4 Applicable Law for Breach of Contract Claim 52.240-90 Security Prohibitions and Exclusions Representations and Certifications 52.243-1 Changes—Fixed-Price 52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short Form)

52.252-2 Clauses Incorporated by Reference 52.252-6 Authorized Deviations in Clauses 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights 252.204-7003 Control of Government Personnel Work Product 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber

Incident Information 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications

Equipment or Services 252.211-7003 Item Unique Identification (IUID) and Valuation 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7048 Export-Controlled Items 252.232-7010 Levies on Contract Payments 252.243-7001 Pricing of Contract Modifications 252.243-7002 Requests for Equitable Adjustment 252.244-7000 Subcontracts for Commercial Items 252.247-7023 Transportation of Supplies by Sea

Additional Terms and Conditions

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

If no surcharge is applicable, the Government’s preferred method of payment is via credit card.

Otherwise, Electronic Payment may be made via Wide Area Workflow (WAWF).

Offerors shall confirm if Government Purchase Card is an acceptable form of payment within the quotation, including applicable surcharge.

The Government will consider Past Performance information in accordance with DFARS Provision 252.213-7000, whereby negative information within Supplier Performance Risk System (SPRS) may render a quote being deemed technically unacceptable.

Quotes and any attachments shall be readable by Microsoft Office or Adobe Acrobat. Offeror shall include the following information with the submissions: point of contact (including phone number and email address), Contractor CAGE Code, and Contractor SAM Unique Entity ID.

Quotes and questions regarding this posting shall be submitted electronically to Hannah Murphy at hannah.l.murphy7.civ@us.navy.mil.Quotes must be received on or before the date as specified in the SAM posting. Quotes received after this date are late and may not be considered for award.