N6339426Q4060_SF 30-Amendment 3.pdf

PDF 591 KB Posted

Attached to
26-SIMACQ-D20-0005 D-Dept Control System Parts/Supplies BPA
Solicitation number
N6339426Q4060
Issued by

About this file

This is Amendment 0003 to a Request for Quotation (RFQ) for a Blanket Purchase Agreement (BPA) issued by the Naval Surface Warfare Center, Port Hueneme Division (NSWC-PHD) under solicitation N6339426Q4060, originally dated September 1, 2026, with an effective amendment date of October 22, 2026. The amendment increases the allowed per order maximum limit from $600,000 to $900,000 (a $300,000 increase) and updates the specification and evaluation sections. The BPA establishes a simplified method for procuring tested and approved parts with a five-year period of performance. Call orders will be issued via email to qualified BPA holders with three business days to submit price quotes, and awards will be made to technically acceptable quoters determined responsible under FAR Part 9, with government discretion to make multiple awards based on evaluation results and best interest.

Quoters must provide administrative information including company name, CAGE code, Unique Entity Identifier, active System for Award Management (SAM) registration, country of manufacture, original equipment manufacturer (OEM) status, business size classification, and point of contact details. Technical evaluation requires completion of a part list and salient characteristics documentation, with quoters preferably being authorized resellers or providing verifiable supply chain traceability to the OEM. Quoters must explicitly state current Cybersecurity Maturity Model Certification (CMMC) Level 1 (Self) status verified through the Supplier Performance Risk System (SPRS) using their CAGE code; without verified active CMMC Level 1 status, quoters will be ineligible for award. Pricing will not be evaluated at the BPA solicitation stage; price competition will occur exclusively at the individual call order level among BPA holders. Delivery terms are F.O.B. Destination with no additional charges for shipping, and payment is made through Wide Area Work Flow (WAWF) electronic invoicing. The government reserves rights to add additional BPA holders (ramp-on) or remove underperforming holders (ramp-off) with 30-day written notice for removal based on failure to maintain SAM registration or consistent non-performance.

View the file

Other files

Show all 20

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Block 14 (Description of Amendment/Modification): I. Update Section C - Description/Specifications/Statement of Work under Section C (III)(a);

II. Update Section L - Instructions, Conditions, & Notices to Offerors or Quoters within ATCH 1- Solicitation;

III. Update Section M - Evaluation Factors for Award within ATCH 1- Solicitation;

IV. Update ATCH 2- Part List with additional parts and part numbers;

V. Update ATCH 3- Salient Characteristics for additional parts and part numbers and;

VI. Update Exhibit 1- Price List.

All changes are in red font.

Section B - Supplies or Services & Prices or Costs

The following changes to Limits have been made:

INFORMATION FROM TO CHANGED BY

Allowed Per Order Maximum

USD 600,000.00 USD 900,000.00 USD +300,000.00

N6339426Q40600003

Section C - Description/Specifications/Statement of Work

Miscellaneous text in this section has been modified to:

Terms and Conditions

The submission of the documentation specified below will constitute a Quoter's acceptance of the terms and conditions of the Request for Quotation (RFQ) and concurrence with the contract type. To be eligible for award, Quoters are required to meet all solicitation requirements, such as terms and conditions, evaluation factor requirements, and be deemed responsible in accordance with FAR Part 9. Failure to meet a requirement may result in a Quoter being ineligible for award. If the quoter finds it necessary to take exception to any of the requirements specified in this solicitation, the Quoter shall clearly identify the exceptions with a complete explanation of why the exception was taken, what benefit accrues to the Government (if any), and its impact, if any, on the performance, schedule, cost, and specific requirements of the solicitation. Each exception shall be specifically related to each paragraph and/or specific part of the solicitation to which the exception is taken. Quoters are cautioned that taking an exception may render the quote ineligible for award. It is recommended that the Quoter contact the Contracting Officer immediately upon identifying an area that may result in an exception.

The following terms and conditions will apply to any BPA which is awarded as a result of this RFQ:

The terms and conditions included in the BPA applies to all purchases made pursuant to it. In the event of an inconsistency between the provision of the BPA and the Contractors invoices, the provisions of the BPA will take precedence.

I. Description of Agreement:

a. A BPA is a simplified method of filling anticipated repetitive needs for supplies by establishing contract terms and procedures with qualified sources. A BPA allows for a Call Order to be made as supplies are required.

b. NSWC-PHD has a requirement for tested and approved parts.

c. When requested by the Contracting Officer, the contractor shall provide the requested supplies under a separate funded BPA Call Order.

d. The contractor will provide supplies called for by this agreement when requested by the Contracting Officer or an authorized caller during a five

(5) year. The period of performance (PoP) will be determined upon award of the BPA. Delivery requirements will be set forth in individual orders issued under this BPA.

e. Either party may terminate this BPA without cause provided written notice is provided. Once a purchase order (order call) is accepted it is binding.

II. Extent of Obligation:

The Government is obligated only to the extent of authorized purchase orders awarded under the BPA. This BPA does not obligate any funds.

a. The Requirements Generator (RG) must confirm there is funding available on a BPA Call Order prior to supplies being ordered or delivered. If the contractor does not have this confirmation and performs services associated with this BPA, they do so at their own risk.

III. Purchase Limitations:

a. At the Call Order level, the allowed per order limit is a maximum of $900,000.00.

b. The Call Order limitation issued under this BPA will be in accordance with FAR 12.201-1(3)(iv)(C). No Call Order may exceed the threshold for the use of streamlined commercial procedures identified in FAR 12.201-1(a).

IV. Call Ordering Procedures

a. Call Orders (purchase orders) will be emailed to all BPA holders, which have been authorized by a warranted Contracting Officer within their respective warrant authority and within the designated Call Order Limitation set forth in this BPA. Quoters will have three (3) business days (or alternate time if specified in RFQ) to submit an offer.

b. Upon receipt of any Call Order issued here under by the Contracting Officer, the contractor, pursuant to such Call Order, shall furnish to the Government product of the type and at the prices set forth in the BPA Call Order. Call Orders may be issued at the discretion of the Government during the period set forth elsewhere in this agreement. The total amount of each Call Order shall establish a firm-fixed price for the Call Order.

Any changes to the fixed price will be issued in writing by the Contracting Officer.

c. The contractor shall, within the time specified, provide the Contracting Officer a price quote as set forth in the price schedule. Upon receipt of the contractor's quote, the Contracting Officer shall review the quotes to ensure acceptability to the Government. Upon completion of this process, the Contracting Officer will prepare a unilaterally issued Call Order which shall include:

i. Quantities and locations;

ii. The place and manner of inspection and acceptance;

iii. The firm fixed price;

iv. Accounting and appropriation data, and

v. Any other pertinent information deemed necessary to the delivery of the Call Order.

d. Only upon receipt of such executed Call Order, signed by the Contracting Officer shall the Contractor commence deliveries. The Contractor shall notify the Contracting Officer if any significant difficulties regarding performance according to the terms of the Call Order are anticipated or any time significant difficulties in performance arise.

e. The Contracting Officer will evaluate the responses received to ensure that they conform to the request submitted and will award to the lowest priced, technically acceptable offer. Evaluation terms will be included in the solicitation.

V. Pricing

a. Prices under this agreement, as set forth in the price list, will be at least as favorable as those charged to the Contractor's most favored customer for similar quantities and terms, inclusive of any prompt payment discounts. Contractor may be required to provide price verification/documentation to establish fair and reasonable pricing. Contractor may submit quotes that deviate from the approved price list only when justified by unique mission requirements or market conditions. Such deviations must be clearly highlighted in the quote and are subject to the review and written approval of the Contracting Officer prior to award. In the absence of such written approval, the rates on the approved price list shall govern.

b. Payment will be made through the contractor's submission of payment request through Wide Area Work Flow (WAWF), see DFARS clause 252.232-7006 Wide Area Work Flow Payment Instructions.

c. Any discount offered by the vendor shall be clearly stated in the quotation. Discounts shall be included in the vendor's pricing and identified in sufficient detail for evaluation purposes. If no discount is offered, the Government will evaluate the quotation based on the full quoted price.

VI. Delivery

a. Delivery terms will be F.O.B. Destination.

b. There will be no additional CLINs added for shipping. If there is a shipping charge, please include in the price.

c. The delivery address and Mark For: Point of Contact (POC) will be obtained at the time the Call Order is issued.

d. The contractor shall provide a detailed delivery receipt for all Call Orders upon delivery completion. The following minimum information must be provided for all quotes provided in response to RFQ:

i. Name of supplier or contractor

ii. BPA number

iii. Date the Call Order was placed

iv. Name of government personnel that placed the Call Order

v. BPA Call Order number

vi. List of items delivered

vii. Quantity, unit price, and extension of each item, less applicable discounts, to detail total cost

VII. Contractor Base Access Instructions

To obtain physical access to the installation under this BPA, all contractor personnel who do not possess a valid Common Access Card (CAC) or Military ID must register for a Local Population ID Card / Base Access Pass. Please complete and follow the instructions in SECNAV 5512 to ensure timely processing of your base access.

VIII. Obsolescent Parts

The Contractor is responsible for the following:

a. Monitoring: Actively monitor products and components provided in this agreement for potential obsolescence.

b. Notification and Recommendation: Notify the Government as early as possible of any item identified to become unavailable. This notification must include a recommended replacement that meets the original form, fit, and function requirements.

c. Approval: Obtain Government approval before implementing any substitution.

IX. Additional Supplies

a. The Government recognizes that during the performance period of this BPA, technology advancements, product obsolescence, or evolving mission requirements may necessitate the addition of new parts, components, accessories.

b. The Government reserves the right to add additional parts or products to the BPA baseline to ensure the agreement remains viable and meets ongoing mission needs. This will be executed by the completion of a bilateral modification to the original BPA.

X. Ramp-On/Ramp-Off Language

a. The Government reserves the right, at its sole discretion, to establish additional BPA holders (ramp-on) for the same or similar Ramp-On:

supplies covered by this solicitation during the effective period of the BPA(s), if determined to be in the Government's best interest. Circumstances may include, but are not limited to, situations where existing BPA holders are unable to meet the Government's requirements, additional competition is warranted, increased capacity is needed, or mission requirements change.

Prior to establishing any additional BPA(s), the Government may provide all interested and responsible sources an opportunity to be considered as appropriate and consistent with applicable procurement laws and regulations. Any newly established BPA shall be subject to the terms and conditions of the solicitation

b. The Government reserves the right to remove (ramp-off) any BPA holder if the BPA holder fails to maintain active registration in Ramp-Off:

SAM.gov, exhibits consistent non-performance (such as late deliveries, failure to quote on multiple Call Orders, or submitting technically unacceptable quotes). A 30-day written notice will be provided prior to removal, and the contractor must honor all accepted before the Call Orders effective date.

Section L - Instructions, Conditions, & Notices to Offerors or Quoters

Instructions to Industry

Submission of quotes shall be portable document format (.pdf) by email to the Primary Point of Contact (POC), Amber Bruno, at amber.n.bruno.

civ@us.navy.mil. No hard copies of the solicitation will be mailed.

By submission of a quote, Quoter agrees that its quote, including any timely revisions thereto, shall remain valid for 90 days. After 90 days quoter may resubmit quote with extended quote validity with or without changes to original quote submission. The foregoing does not preclude a Quoter from withdrawing its offer prior to award. The Quoter shall demonstrate that the quote is in compliance with the requirements, terms, and conditions of the solicitation.

By submitting a quote in response to this solicitation, the Quoter agrees that any standard terms, conditions, or assumptions included in the Quoter's quote are expressly and completely superseded by the terms and conditions of the final signed BPA award. Failure to excluded conform to any of the requirements of the solicitation may form the basis for rejection of the quote.

General Solicitation Compliance

1. Quoter shall provide the following in Quote:

Vendor Administrative Information :

- Company Name, Address, CAGE Code, - Unique Entity Identifier (UEI)

- Active registration in the System for Award Management (SAM). Note: registration must be "active" in SAM at the time of quote -as well as, at the time of award and throughout the entire award/contract performance

- Country where items are manufactured (if applicable)

- Is your company the OEM or proprietary for these products?

- Business Size, Special Size Sub-Category, and Type of Ownership for the Company.

- Do you have distributors (if applicable)

- Does your company accept Wide Area Work Flow (WAWF) for electronic invoicing? (http://wawf.eb.mil)

- Response Point of Contact name, telephone number and email address

Quoters shall fill out full text provisions and clauses, as required within Attachment (ATCH) 1- Solicitation.

2. Price.

Quoter must complete Exhibit 1- Price List in accordance with instructions as stated in Exhibit 1- Price List and submit it with their quote to the POC. This pricing information is requested solely for informational and administrative purposes to establish a baseline of capabilities and to populate the overarching BPA administration files.

3. Technical.

Quoter must complete and provide ATCH 2- Part List in accordance with instructions stated in ATCH 2- Part List. Quoter must quote items with salient characteristics in accordance with ATCH 3- Salient Characteristics, if applicable.

4. Cybersecurity Maturity Model Certification (CMMC) Compliance.

The Quoter shall explicitly state their current CMMC status. Prior to submitting a quote, the Quoter is responsible for ensuring that their CMMC Level 1 (Self) assessment results are correctly entered and active in the Supplier Performance Risk System (SPRS) (https://www.

) for the CAGE Code provided.sprs.csd.disa.mil/

N6339426Q40600003 https://www.google.com/url?q=https%3A%2F%2Fwww.sprs.csd.disa.mil%2F https://www.google.com/url?q=https%3A%2F%2Fwww.sprs.csd.disa.mil%2F

Section M - Evaluation Factors for Award

The following factors will be used to evaluate quotes:

Evaluation Criteria:

Basis for Award. The Government will award BPA to the Technically Acceptable Quoter(s), that are determined responsible in accordance with FAR Part 9. The Government has discretion to make any number of awards. Award decisions are based on the evaluation results and the Government's best interest.

The government will evaluate information based on the following evaluation criteria listed below:

1. General Solicitation Compliance.

The Government will evaluate the Quoter's Administrative Information on an Acceptable/Unacceptable basis to determine the Quoter's responsiveness to the solicitation and fundamental eligibility for award. Quotes that fail to provide the required administrative information, or fail to meet the mandatory eligibility requirements, may be deemed unacceptable and removed from further consideration.

2. Price.

Exhibit 1- Price List will not be evaluated, scored, or analyzed for the purpose of selecting BPA awardees. There is no requirement for adequate price competition at the BPA solicitation stage to receive an award Quoters are advised that price will be evaluated on the Call Order level. All actual price competition, price evaluations, and fair and reasonable price determinations will occur exclusively when individual Call Orders are competed among BPA holders.

3. Technical Capability.

Technical capability will be evaluated on an Acceptable or Unacceptable basis. Quotations will be evaluated against ATCH 2- Part List in accordance with the instructions set forth therein. To be determined technically acceptable, the quotation must demonstrate that all proposed supplies satisfy either the part number or the salient characteristics requirement specified in ATCH 3- Salient Characteristics.

Quoter should be an authorized reseller at the time of quote submission. Note: Quoters that are not authorized resellers shall provide verifiable supply chain traceability documentation establishing an unbroken chain of custody back to the OEM on each call order. Technical acceptability will be evaluated and determined prior to the award of each call order.

4. CMMC Compliance.

Will be considered on an Acceptable or Unacceptable basis. The Government will verify the Quoter's CMMC Level 1 (Self) status by querying the Supplier Performance Risk System (SPRS) utilizing the Commercial and Government Entity (CAGE) Code provided in the Quoter's quotation. To receive an "Acceptable" rating, the Quoter's SPRS record must demonstrate a current CMMC Level 1 (Self) status. Quoters without a verified, active CMMC Level 1 (Self) status in SPRS at the time of evaluation will receive a "not acceptable" rating and will be ineligible for award.

Adjectival Rating Description

For General Solicitation Compliance, Technical Capability and CMMC:

The quote meets all stated technical requirements for the factor.Acceptable:

The quote fails to meet one or more stated technical requirements for the factor.Unacceptable:

IDCode: J
Page: 1
Pages: 9
AmendNo: 0003
EffDate: 22 Oct 2026
ReqNo: See Continuation Sheet
ProjNo:
IssCode: N63394
AdmCode:
IssuedBy: COMMANDING OFFICER

NAVAL SURFACE WARFARE CENTER PHD, 4363 MISSILE WAY

PORT HUENEME, CA 93043-5007

UNITED STATES

Amber Bruno, Email: amber.n.bruno.civ@us.navy.mil Telephone: 8057271054 AdminBy:

SCD: PAS:

ContractorNameAdd:
Code:
FacCode:
SolChg: 1
SolNo: N6339426Q4060
SolDate: 01 Sep 2026
AwardChg: Off
AwardNo:
AwardDate:
Amended: 1
OffrExt: Off
OffrNoEx: 1
NoCopies: 1
ApprData: See Section G - Contract Administration Data
ChgeOrd: Off
ChgeOrder:
Modify: Off
SuppAgre: Off
SuppAuth:
ModOthr: Off
OthrSpec:
NoReq: Off
Require: Off
Copies:
Descript: See Schedule
ContNameTitle:
CoNameTitle: Vinnie M. Principe
ContDate:
CODate: 22 Oct 2026

File details come from the government source that posted it. Updated .