ATCH 3- Salient Characteristics.pdf

SALIENT CHARACTERISTICS

Part Number

(PN)

Requirements

506519 • 10/100Base-TX to 100Base-FX (ST) Multi-Mode, 2 km (1.24 mi) Standards

• IEEE 802.3 (Twisted Pair Ethernet)

• IEEE 802.3u (Twisted Pair/Fiber Optic Fast Ethernet)

• Media support:

o 100Base-TX Cat3 or higher UTP/STP RJ45, EIA/TIA 568 o 100Base-FX multi-mode 62.5/125 or 50/125 µm Fiber

• Connectors:

o One RJ45 port, 100Base-TX o One Fiber ST duplex port, 100Base-FX

• Distances:

o 2 km / 1.24 mi (62.5/125 or 50/125 µm fiber cable) o 100 m / 300 ft (RJ45 cable)

• Wavelength: 1310 nm

• Min. TX power: -15 dBm

• Max. TX power: -8 dBm

• RX sensitivity: -32 dBm

• Signal loss: 2 dB/km

• Certifications: FCC Class B, CE, UKCA, NDAA

• LEDs o Power o LINK/ACT for RJ45 port o LINK/ACT for Fiber ST port o 100 Mbps link speed indicator for RJ45 port o Optical signal input LED o Full-/half duplex

• Power o External power adapter, 5 VDC, 1 A o Power consumption: 3.0 watts (maximum)

• Environmental o Metal housing o Dimensions: 107 (L) x 70 (W) x 26 (H) mm (4.2 x 2.8 x 1.0 in.)

o Weight: 180 g (0.4 lbs.)

o Operating temperature: 0 – 70°C (32 – 158°F) o Operating humidity: 10 – 90% RH, non-condensing o Storage temperature: -45 – 80°C (-49 – 176°F)

006R04685 • Color: Black

• Capacity/Yield: ~10,500 pages at 5% page coverage (ISO/IEC standard)

• Compatibility: Xerox C410, C410DN, VersaLink C415, C415DN

• Dimensions: Height 3.56 in, Length 7.28 in, Width 4.61 in, Weight 0.97 lb

• UPC: 095205039818

006R04686 • Color: Cyan

• Capacity/Yield: ~7,000 pages at 5% page coverage (ISO/IEC standard)

• Compatibility: Xerox C410, Xerox VersaLink C415, Xerox VersaLink C415DN

• Dimensions: Approx. 7.28 in (L) × 4.61 in (W) × 3.56 in (H)

• Weight: ~0.77 lb

• UPC: 095205039825

006R04687 • Color: Magenta

• Capacity/Yield: ~7,000 pages (high capacity, based on ISO/IEC testing at ~5% page coverage)

• Compatibility: Xerox C410, Xerox VersaLink C415, Xerox VersaLink C415DN

• Dimensions: 7.28" (L) × 4.61" (W) × 3.56" (H)

• Weight: ~0.77 lb (1 lb in some listings)

• UPC: 095205039832

006R04688 • Color: Yellow

• Capacity/Yield: ~7,000 pages (ISO/IEC standard, based on 5% page coverage;

actual yield depends on usage and coverage)

• Compatibility: Xerox C410, C410DN, VersaLink C415, C415DN

• Dimensions: Height 3.56 in, Length 7.28 in, Width 4.61 in

• Weight: 0.77 lb

• UPC: 095205039849

008R13325 • Capacity/Yield:

o Officially rated at 30,000 pages (some sources list ~25,000 pages based on average 5% page coverage).

o Designed to collect excess toner from the printer/copier, preventing waste and maintaining print quality.

• Compatibility:

o Works with Xerox C310, C315, C320, C325, C410, C410DN, VersaLink C415, and C415DN.

• Design & Performance:

o Specially formulated and tested for optimal image quality and reliable printing page after page.

o Quick and easy to replace, minimizing downtime.

• Dimensions & Weight:

o Length: ~1.526 ft (18.1–18.31 in) o Width: ~7.56 in o Height: ~5.51 in o Weight: ~1.65 lb (2 lb including packaging).

• UPC Code: 095205068658.

10VV1 • 10A 250VAC Power Line Filter, 1.2mH Inductance, 813nF Capacitance

• Multi-purpose power line filter designed for AC applications, featuring a 10A current rating and a maximum AC voltage rating of 250V. This filter incorporates 1.2mH inductance and 813nF capacitance, with a leakage current of 500uA. It operates at 50Hz/60Hz and is suitable for chassis, flange, and panel mounting via quick connect terminations. The filter is UL approved, lead-free, RoHS compliant, and ELV compliant, with an operating temperature range of - 10°C to 40°C.

• Frequency: 50 Hz

• Current: 10A

• Capacitance: 813nF

• Current Rating: 10A

11938FB-A1J-

EA-00

Other known PNs

• Type: AC axial tubeaxial fan

• Series: 11938FB

• Frame: Square, 119 mm (L) × 119 mm (H) × 38 mm (W)

• Rated Voltage: 115 VAC, 60 Hz that meet requirement:

11938FB-A1J-

EA-00_60Hz or

4715FS-12T-

B10-D00_60Hz

• Airflow: 70 CFM (1.98 m³/min)

• Static Pressure: 0.120 in H₂O (29.9 Pa)

• Rated Speed: 1900 RPM

• Power Rating: 10 W

• Current Rating: 0.110 A

• Noise Level: 33 dB(A)

• Bearing Type: Ball bearing

• Motor Type: Shaded pole induction motor

• Frame Material: Aluminum alloy

• Blade Material: UL94V-O reinforced plastic

• Operating Temperature Range: -10 °C to +70 °C (non-condensing)

• Storage Temperature Range: -40 °C to +70 °C

• Expected Life: 100,000 hours at 25 °C

• Lead Wires: AWG 22, UL 3266, CSA CL 1252

• Terminals: Faston #110 or equivalent

• RoHS Compliance: Yes (RoHS 3 compliant)

• Weight: ~1.213 lbs (per Mouser data)

• Flange mount design with panel cut-outs for inlet/outlet airflow

• Counterclockwise rotation; air inlet over struts

• Suitable for general ventilation, cooling, and airflow control in industrial or commercial equipment.

15038PB-A1J-

EA-00_60Hz

Other known PNs that meet requirement:

5915PC-12T-

B10-A00 or

5915PC-12T-

B10-A00_60Hz

• Frame size: 150 mm (W) × 172 mm (H) × 38 mm (D)

• Nominal voltage: 115 VAC

• Frequency: 60 Hz

• Airflow: 102.3 CFM (2.9 m³/min)

• Max static pressure: 0.243 in H₂O (60.7 Pa)

• Rated speed: 1650 RPM

• Noise level: 38 dBA

• Power rating: 18 W (0.19 A at 115 V)

• Bearing type: Ball bearing

• Life expectancy: 100,000 h (L₁₀) at 25 °C

• Mass: ~800 g (1.764 lbs)

• Ingress protection: None (open design)

• Starting voltage: 75 VAC

• IP rating: Not specified (no sealing)

• Blade type: Plastic (legacy part 5915PC)

3031-00948-42 • Material o Frame subassembly, alum extrusion 0.625 X 0.500, alum honeycomb 0.500 thick with o 0.125 cells build per 77-0067-2005 o 1.2 – gasket subassembly, NEO o Sponge 0.090 thick with PSA o Backing, knitted FX wire o Mesh 0.090 X 0.125, industrial o 3M brown adhesive, compressions stops o Build per 77-0068-1140 o Glue mesh to outside of gasket

• Tooling o Drill fixture- HASS MILL o Rule Die- Flashcut

• Finish o Tin plate per ASTM B-545, Class C

3031-00949-42 • Material o Frame subassembly, alum o Sheet .06 TK alum o Honeycomb 0.250 Thick with o 0.125 CELLS o Build per 77-0067-2006-A box o 77-0067-2006-B Cover o Gasket subassembly o Multicon silicon solid with monel wires o .032" TK, Compression stops o Build per 77-0068-1141

• Tooling o Drill fixture- HASS MILL o Rule DIE- Flashcut

• Finish o Tin plate per ASTM B-545 Class C

3031-01018-57 • Material o Frame subassembly, alum extrusion 0.625 X 0.500, Alum filter media, 2X

Diamond grill build per 77-0067-0696 o Gasket Subassembly, NEO sponge 0.093 Thick with PSA backing, knitted

FX wire mesh 0.093 X 0.125, Industrial 3M brown adhesive, compressions stops build per 77-0068-1194 glue mesh to outside of gasket

• Tooling o Drill fixture- HASS mill o Flashcut -77-0068-1194

• Finish o Plate yellow chromate per MIL-DTL-5541F Plate PER 21-0003-3200

3032-00407-42 • Material o Fram subassembly, alum extrusion 0.500 X 0.625 Alloy 6063-T4 Aluminum alloy 5052 per MIL-C-7438 0.500 thick with 0.125 straight cells, aluminum diamond grill 0.054 thick alloy 5005-H34 per MIL-M-17999 B (MR) Class II, build per MAJR # 77-0067-1817 o Gasket subassembly, neoprene sponge 0.093 thick with PSA backing per MIL-R-6130 TYPE 2 GRADE A, knitted FX wire mesh 0.093 X 0.125 PER ASTM B452 CLASS 40A and ASTM B250 CLASS T40A, inductrial 3M adhesive, compression stops o Build per MAJR # 77-0068-0990 o Stainless steal 18-8 HEX socket head captive panel screw with 8-32 thread

1.00 inch long, MCMASTER-CARR part 95966A341, MAJR # 22-0129-

• Tooling o Drill fixture- none o Use MILL program 77-0067-1817 o Open relief using .221Ø on drill press o Rule DIE 40782-1672-00001 o Punch Ficture 40777-172-00001

• Finish

• TIN Plating over electroless nickel base plate per ASTM B545, CLASS C

3032-00424-42 • Material o Fram subassembly, alum extrusion 0.625 X 0.500, ALUM Honeycomb

0.500 thick with 0.125 CELLS, 2X alum diamond grill .051 THK build per 77-0067-2007 o Gasket subassembly, NEO sponge 0.090 thick with PSA backing, knitted FX wire mesh 0.090 X 0.125, industrial o 3M brown adhesive, compression stops o Build per 77-0068-1142 o Glue mesh to outside of gasket o Captive panel screws 12 TOTAL

• Tooling o Drill fixture- HASS MILL o Rule DIE- Flashcut

• Finish o Tin plate per ASTM B-545 Class C

71094

Other known PNs that meet requirement:

alt EB1 or 70102 or dwg 8749351

• All-in-one read and write solution for CDs, DVDs and Blu-ray discs*

• Compatible with BDXL discs - capacities up to 100GB

• Maximum write speeds of 6X for Blu-ray, 8X for DVD and 24X for CD

• Compact and lightweight for easy travel

• M DISC Ready - perfect archival solution with industry-leading disc lifetime expectancies

• Compatible with Windows and Mac OS

• USB 3.2 Gen 1 performance with USB 2.0 compatibility

• Includes USB Type-C® adapter

92100142

Other known PNs that meet requirement:

92100142H

• Type: Enclosed AC/DC Converter (offboard)

• Number of Outputs: 4

• Output Voltages:

o 5 V (up to 50 A) o 3.3 V (up to 30 A) o 12 V (up to 10 A) o −12 V (up to 3 A)

• Total Output Power: ~500–505 W

• Input Voltage Range: 90 VAC to 264 VAC (universal input)

• Mounting Type: Rack mount (enclosed form factor)

• Applications: ITE (Industrial, Test, and Evaluation) and commercial systems

• Features:

o Hot swappable outputs o Universal AC input o No minimum load required o CE, cULus, TUV approvals o ROHS3 compliant, REACH unaffected

• Efficiency: Not specified in public specs

• Environmental Compliance: RoHS3, REACH, MSL 1 (unlimited) Variants

• 92100142: Standard enclosed rackmount model with 50 A, 30 A, 10 A, 3 A outputs.

• 92100142H: Frontend AC/DC converter variant with 50 A, 30 A, 15 A, 5 A outputs, load sharing, PFC, and Compact PCI® mounting.

ADS-15512 • Output Number:CH1 CH2

• DC Voltage: 12V 5V

• Rated Current: 11.5A 3A

• Current Range: 0 ~ 12.5A 0 ~ 3A

• Rated Power: 153W

• Ripple & Noise (max.): Note.2 150mVp-p 100mVp-p

• Voltage ADJ. Range: CH1:10.8 ~ 13.2V

• Voltage Tolerance: Note.3 ±2.0% ±3.0%

• Line Regulation: ±0.5% ±0.5%

• Load Regulation: ±1.0% ±2.0%

• Setup, Rise Time: 1000ms, 90ms/230VAC 2000ms, 90ms/115VAC at full load

• Hold Up Time (Typ.): 24ms/230VAC 20ms/115VAC at full load

• Voltage Range: 88 ~ 264VAC 124 ~ 370VDC

• Frequency Range: 47 ~ 63Hz

• Power Factor (Typ.): PF>0.92

• Efficiency (Typ.): 77%

• AC Current (Typ.): 2.5A/115VAC 1.5A/230VAC

• Inrush Current (Typ.): Cold Start 23A/115VAC 45A/230VAC

• Leakage Current: <1mA / 240VAC

• Overload: 105 ~ 135% rated output power o Protection type: Constant current limiting, recovers automatically after fault condition is reoved

• Over voltage: CH1:13.8 ~ 16.2V o Protection type: Shut down o/p voltage, re-power on to recover

• Working Temp: -10 ~ +60℃ (Refer to "Derating Curve")

• Working Humidity: 20 ~ 90% RH non-condensing

• Storage Temp., Humidity: -20 ~ +85℃, 10 ~ 95% RH

• Temp. Coefficient: ±0.03%/℃ (0 ~ 50℃)

• Vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

• Safety Standards: UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved

• Withstand Voltage: I/P-O/P:3KVAC I/P-FG:2.0KVAC O/P-

FG:0.5KVAC

• Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC /

25℃/ 70% RH

• EMC Emission: Compliance to BS EN/EN55032 (CISPR32) Class B, BS

EN/EN61000-3-2,-3, EAC TP TC 020

• EMC Immunity: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS

EN/EN55035, light industry level, EAC TP TC 020

• MTBF: 2235.6K hrs min. Telcordia SR-332 (Bellcore); 252.1K hrs min

MIL-HDBK-217F (25℃)

• Dimension: 199*110*50mm (L*W*H)

• Packing: 1Kg; 16pcs/16Kg/0.95CUFT

AFL3-S500 • Capacity: 500 GB (also available in HDD and higher SSD capacities).

• Encryption: Real-time 256bit AESXTS hardware-based encryption, FIPS 1402

Level 3 validated for NIST compliance.

• Security: Integrated 10digit PIN keypad for onboard authentication.

o Forced enrollment to prevent unauthorized use.

o Autolock after unattended periods.

o Bruteforce defense with self destruct after multiple failed PIN attempts.

o Admin/User modes and drive reset feature.

• Performance: Up to 5 Gb/s data transfer over USB 3.1 Gen 1; some specs list up to 370 MB/s read/write speeds.

• Durability: Aircraft grade 6061 aluminum alloy enclosure, shock/vibration resistant, operating temperature range 40 °C to +70 °C.

• Connectivity: USB 3.1 Gen 1 (USB 3.2 Gen 1 equivalent) with TypeA and TypeC cables included.

• Compatibility: Cross platform (Windows, Mac, Linux, Android, Chrome) and works in environments without a keyboard.

• Design: Compact, wear resistant keypad, IP certification pending.

• Other: 8 MB buffer, 0.1 ms access time, TAA compliant.

BASE-WIRED

Other known PNs that meet requirement:

Base 5

• Onboard temperature sensor:

o Built-in web server.

o Alerting via email, voice call or SMS.

o Industrial protcols: SNMP and Modbus TCP o Web API protocols: JSON and XML.

o DHCP or static IP.

o PoE built-in, optional AC adapter or USB power adapters.

o Ultra low power usage (< 0.5W).

o Runs locally o No Internet connectivity required to operate.

o Stand-alone device: no software needed.

o Fully responsive web interface for desktop, tablet or smart phone.

o User configurable firewall for enhanced security.

o Industrial grade: UL Listed, FCC and CE certified.

• TCP/IP: IPv4 at 10/100 Mbps.

• Power Source: PoE: IEEE 802.3af or BASE-PWR (Optional AC power adapter) or BASE-PWR-USB (USB power adapter)

• Power Usage: 1500mW (without sensors attached).

• Network Data Transfer SNMP GET (50 - 130 bytes) , SNMP Trap (143 - 280 bytes)

• Built-in: web server, SNMP v1, v2 & v3 (MD5/AES), Modbus TCP.

• Built-in alerting options: Email, SMS (over IP) & SNMP Traps.

• External sensors probes: 2 sensor probes through straight RJ45 CAT6/7 cable with max distance of 100m or 330ft (subject to cable quality and interference).

• Max distance to switch: CAT6/CAT7 up to 100m / 300ft

• Temperature Resolution: 0.1°C / 0.18°F

• Temperature Reading: "-55°C to +125°C (-67°F to +257°F) / SensorGateway operates up to 75C / 167°F

• Temperature Accuracy: +/- 1°C (+/- 2°F) over 0°C to +75°C / 32°F to 167°F.

• Operating Temperature Range: 0°C to +75°C (+167°F).

• Humidity: (operating and storage) – < 90% rH (non-condensating).

• Dimensions: 70 mm (2.7") x 88 mm (3.4") x 22 mm (0.8").

• Weight: 0.21 kg ( 0.46 lbs.)

C410/YDN • Print Speed - Color: up to 42 ppm Black: up to 42 ppm

• Two-sided Output: Standard

• Monthly Print Volume: Up to 10,000 pages

• Duty Cycle: Up to 125,000 images/month

• Processor Speed: 1.0 GHz

• Print Memory (standard): 1000 MB standard

• Connectivity: Gigabit Ethernet, Hi Speed USB 2.0 (Type A), Hi Speed USB 2.0

(Type B) (optional: Wireless Network Adapter (802.11 b/g/n/ac))

• Maximum Print Resolution: 1200 x 1200 dpi, 4800 Color Quality

• First-Page-Out Time, Printing: As fast as 6.1 seconds black and white / 6.4 seconds color

• Page Description Languages (PDL): Direct Image, PCL® 5 Emulation, PCL® 6 Emulation, PDF v1.7 Emulation, PostScript® 3 Emulation

• Print Features: Booklet Layout, Collation, Draft Mode, Duplex, Earth Smart

Settings, N-up, Normal, One Touch UI, Orientation, Print Job ID in Margins, Print Quality, Rotate Image 180 Degrees, Saved Settings, Saved and Sample Set Job Types, Secure, Tray and Toner Status, Watermark

• OS Support: Microsoft Universal Print, Windows Server 2012, Windows Server 2012 R2, Windows Server 2019, Windows Server 2022, Windows® 10, Windows® 11, macOS 11.x, macOS 12.x, macOS 13.x

• Paper Capacity o Tray (Main tray): 250 sheets o Tray (Manual feed slot): 1 sheet o Tray (Multipurpose Feeder) (optional): 100 sheets o Tray (550-sheet Feeder) (optional): 550 sheets o Paper size o Tray (Main tray): Custom sizes: 3.8 x 5.8 in. to 8.5 x 14 in. (98 x 148 mm to

216 x 356 mm) o Tray (Manual feed slot): Custom sizes: 3 x 5 in. to 8.5 x 14 in. (76 x 127 mm to 216 x 356 mm) o Tray (Multipurpose Feeder) (optional): Custom sizes: 3 x 5 in. to 8.5 x 14 in.

(76 x 127 mm to 216 x 356 mm) o Tray (550-sheet Feeder) (optional): Custom sizes: 5.83 x 8.27 in. to 8.5 x 14

in. (148 x 210 mm to 216 x 356 mm) o Output capacity - 125 sheets

• Media Types: Plain Paper, Light Paper, Heavy Paper, Card Stock, Labels (Paper Labels), Envelopes, Colored Paper, Letterhead, Preprinted, Bond, Glossy, Rough/Cotton, Recycled

• Security Features: Access Controls, Certificate Management, Confidential Print, Digitally Signed Firmware Updates, FIPS 140-2, Image Overwrite, Non- Volatile Memory Wipe, Port Filtering, Protected USB Ports, Secure Password Reset, TCP Connection Filtering, TLS 1.3, Trusted Platform Module (TPM), WPA3 Support

• Minimum Dimensions (WxDxH): 17.9 x 16.6 x 12.5 in. (455 x 423 x 318 mm)

• Weight: 45.3 lb (20.6 kg)

• Temperature (operating): 50 - 90 ° F (10 - 32 ° C)

• Relative humidity (operating): 20 - 80 % RH (noncondensing)

CCG012 • Rugged, locking pin headers

• COM Express® Type 6 compatibility

• Mini-PCIe Expansion, USB 2.0, DisplayPort++

• Small size, 95mm x 125mm

• Supports latest Intel® processor sets

• Extended Temperature Range -40°C to +85°C

• Connect Tech’s COM Express® Type 6 Rugged Ultra Lite Carrier Board is a compact carrier board which matches the dimensions of a COM Express® Basic module and offers the ultimate durability with locking, rugged pin headers.

• COM Express® Type 6 Rugged Ultra Lite Carrier Board is ideal for space constrained applications, harsh environments, demanding conditions and supports extended temperature ranges of -40°C to +85°C.

• Specifications o Compatibility: COM Express® Type 6, PCIMG COM Express® COM.0

R2.0 o Mini PCIe/mSATA : 1x SIM Card Expansion, 2 slots (with PCIe, USB and SATA connections) o Storage: 2x External Vertical Locking SATA Connector, 2x mSATA o Network: 2x Gigabit (10/100/1000) Ports o GPIO: 8-bit GPIO o USB: 8x USB 2.0 o Display: 1 x LVDS interface (single ch 24-bit, dual ch 48-bit), 1x VGA, 2x DDI o Audio: HD Audio (Cirrus Logic CS4207 codec), 1x stereo input, 1x stereo output o Serial: 1x Console RS -232 port (TX/RX), 2x RS-232, 2x RS-422/485 o Misc: Battery Low Indication, I2C, PC speaker Interface, SMBus, System Status (S3 and Reset Outputs) o Power Requirements: Input: Single +12V input +/- 5% (5mm pitch terminal connector), On-board RTC Battery 3V 48mAh (with option to select from RTC external battery) o I/O Connector Type: All low-profile shrouded locking ruggedized 2mm pitch headers, can be mated to panel mountable cable set or MIL type connectors o Operating Temperature: -40°C to +85°C (-40°F to +185°F) o Dimensions: 125mm x 95mm

CD03-GTS-

14VDC

• Overall Length: 1.140 MAX

• Lens Length: .265

• Pin Length: .203

• Voltage: 14-volt direct current system

• Lens: high strength plastic

• Housing: Anodized Aluminum

• Header: High dielectric molded nylon

• Lens Color: Green translucent

• Lens Type: short flat lens design

• Finish: Silver

CD03-GTS-

6VDC

• Overall Length: 1.140 MAX

• Lens Length: .265

• Pin Length: .203

• Voltage: 6-volt direct current system

• Lens: high strength plastic

• Housing: Anodized Aluminum

• Header: High dielectric molded nylon

• Lens Color: Green translucent

• Lens Type: short flat lens design

• Finish: Silver

CD03-RTS-

14VDC

• Overall Length: 1.140 MAX

• Lens Length: .265

• Pin Length: .203

• Voltage: 14-volt direct current system

• Lens: high strength plastic

• Housing: Anodized Aluminum

• Header: High dielectric molded nylon

• Lens Color: Red translucent

• Lens Type: short flat lens design

• Finish: Silver

CR2032 • Lithium/manganese dioxide coin cell designed for long-life, reliable power in small devices.

• Key Features o High capacity & energy: Industry-leading cell capacity for its size, with nominal capacities around 245–265 mAh and ~735–745 mWh.

o High voltage response: Stable output voltage over most of its lifetime.

o Low self-discharge: <1–2% loss after 1 year at +20 °C.

o Excellent corrosion resistance.

o Child-safe design: Non-toxic bitter coating on both terminals and child-resistant packaging.

o Compliance: Meets IEC 60086-4, UN 38.3, REACH, ISO 9001, and

Duracell World Class Continuous Program standards.

o Durability: Passes rigorous safety tests (altitude, thermal cycling, vibration, shock, crush, etc.).

• Electrical Characteristics o Nominal Voltage: 3.0 V (open circuit ~3.2 V at +20 °C).

o Nominal Capacity: ~245–265 mAh (15 kΩ continuous load, 2.0 V cut-off).

o Standard Continuous Discharge: 0.3–0.5 mA.

o Max Continuous Discharge: 3–6 mA.

o Max Pulse Discharge (1 s): 50–20 mA.

o Nominal Energy: ~735–745 mWh.

o AC Impedance @ 1 kHz: ~11–20 Ω.

• Physical Characteristics o Dimensions: 20.0 mm diameter × 19.7 mm height (IEC/ANSI).

o Typical Weight: ~2.8–3.14 g.

o Li Metal Content: ~0.06–0.07 g.

o Case: Ni-plated stainless steel.

• Operating & Storage Conditions o Operating temperature range: -20 °C to +60 °C (some datasheets list -30 °C to +70 °C).

o Storage Temperature: 5 °C to 30 °C (41 °F to 86 °F).

o Storage Humidity: <70% (optimal).

o Durability: Guaranteed for 10 years in storage.

D15B • Design & Mounting:

o Specifically engineered for DHN or DHO holders (rear mounting, 3/8" hole).

o Matches the terminal pin position of standard C-lite lens marking orientation.

o Available in multiple terminal styles: turret pin, solder cup, and solder lug.

• Compatibility:

o Securely retains CF, CG, or CR series C-lite cartridges.

o Works with CD–LED lamps in the same holder configuration.

o Part of a complete assembly with the lampholder; the collar can be removed and replaced.

• Material & Construction:

o Anodized aluminum bushings for the lampholder base.

o High-temperature plastic lens caps (when paired) for durability and heat resistance.

• Lens Cap Pairing:

o The D15 collar is paired with a lens cap (e.g., D06, D07, D09) depending on the C-lite style and lens clarity requirements.

o Lens caps are designed to rotate for alignment of lens markings after installation.

• Military & Standards:

o Eldema D-series parts meet MIL-L-3661 specifications for certain lens cap types.

o D15B is part of a military-grade lighting system (FSC 6240, CAGE Code

1EPT9).

DIG-

SSD220006-SI

Other known PNs that meet requirement:

8749355

• Security Certification:

o FIPS 140-2 Level 2 cryptographic module o Compliant with TCG OPAL SSC protocol for self-encrypting drives o Supports AES-256 hardware-level encryption/decryption at the NAND flash level o Meets stringent physical security, firmware integrity, and cryptographic requirements

• Form Factors & Interfaces:

o Available in 2.5" SATA and M.2 SATA/PCIe Gen 3x4 NVMe configurations o SATA III interface up to 6 Gbps

• Encryption & Authentication:

o On-the-fly AES encryption/decryption for all stored data o Supports pre-boot authentication (PBA) and multifactor authentication for secure OS/VM boot o Compatible with CAC/PIV/CIV tokens and USB/YubiKey authentication

• Performance:

o SATA: Read up to 550 MB/s, Write up to 530 MB/s o NVMe: Read up to 3,400 MB/s, Write up to 3,100 MB/s o High sustained throughput for commercial workloads

• Reliability & Durability:

o Advanced flash management (wear leveling, bad block management, TRIM) o MTBF > 1,600,000 hours

• Compliance & Standards:

o TAA-compliant for U.S. government use o RoHS, FCC, UL, CE compliant o Meets federal cybersecurity requirements for data at rest

• Temperature Range:

o Operation: 0°C to 70°C o Storage: -40°C to 85°C

DZ300-1EC • Input Voltage: 90VAC to 264VAC

• Input Frequency: 47Hz to 63Hz

• Power Factor: >0.95

• Inrush Current (cold): Less than 30A at 110VAC or 60A at 220VAC cold start, 25°C

• Operating Temperature: 0 to 70ºC, De-rated 2.5%/°C >50°C

• Storage Temperature: −20ºC to 85ºC

• Cooling: Free Air Convection for 300W 18CFM for 360W

• Efficiency: 80-90% Typical

• Holdup Time: >20ms

• Overvoltage Type: Latch off

• Overload Protection: Auto recovery

• Short Circuit Protection: Auto recovery

• Designed in Full Compliance with: UL 60950 1 CSA 22.2 #234, TUV

EN60950 1

• EMI: FCC “B” EN55022 “B”

• Harmonics: EN61000 3 2 class D

• EMS: EN61000-4 -2, -3, -4, -5, -6, -8, -11

• OUTPUT SPECS WATTS: 300

o Voltage (Vdc): +5V / Load (A): Min. = 0, Rate = 32, Peak: 45 / Tolerance:

1% / Ripple & Noise: 50mV / Regulation: Line: +/-1%, Load +/-1% o Voltage (Vdc): +12V / Load (A): Min. = 0, Rate = 10, Peak: 14 / Tolerance:

5% / Ripple & Noise: 100mV / Regulation: Line: +/-1%, Load +/-1% o Voltage (Vdc): -12V / Load (A): Min. = 0, Rate = 1, Peak: 2 / Tolerance: 5% / Ripple & Noise: 100mV / Regulation: Line: +/-1%, Load +/-1%

ENV-TEMP • Plugs into the base unit (BASE-WIRED).

• Powered by the base unit (BASE-WIRED).

• Compact plug & play sensor.

• 0U rack or wall mountable.

• Steel enclosure. Industrial Grade.

• Alerts via SNMP Traps, email, SMS or voice calls.

• optional calibration certificates available.

• Technical Specifications

• Our basic temperature sensor to monitor your critical facility

• Power Source: SensorGateway (BASE-WIRED)

• Power Usage 60 mW

• Temperature Resolution: 0.1°C (0.18)°F precision

• Temperature Accuracy: +/- 0.5ºC (+/- 0.9 ºF) from -10°C to +85°C / 14°F to

185°F

• Temperature Reading: -55°C to +125°C (-67ºF to +257ºF)

• Reading Unit in Celsius or Fahrenheit

• Operating temperature range 0°C to +75°C (32°F to +167°F)

• Humidity

• (operating and storage)

• < 90% rH (non-condensating).

• Dimensions 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8")

• Weight 0.12kg (0.26 lbs.)

FA10250 • 3000 VA, 2700 W

• 115 VAC at 60 Hz input

• 115 VAC at 60 Hz output

• Double conversion

• Rugged

• High temperature

• Isolated

• Hot swap battery drawer

• Power factor correction for Navy shipboard applications.

• Key Specifications & Features:

o Technology: On line (double conversion) UPS — provides continuous power transfer without transfer time o Battery Configuration: Hot swap lead acid battery drawer for maintenance without downtime o Battery Chemistry: Lead (Pb) acid o Chassis: 2U rackmount for space efficient installation o Environmental Rating: Rugged, high temperature operation suitable for harsh marine environments o Isolation: Fully isolated output for safety and noise reduction o Power Factor Correction: Integrated to improve efficiency and reduce harmonic distortion

• Power Rating: 2700-6000 Watts

• Chassis Configuration: 2U Rackmount

• Input Voltage: 115 VAC

• Output Voltage: 115 VAC

• Input Connector: Circular Mil

• Output Connector: Circular Mil

• Communication: SNMP

FB00031 • Rugged & Extreme Environments

• All Intelli Power systems utilize circuit boards, chassis and components that are specifically designed for extreme environments. In today’s marketplace, repackaged commercial products are often billed as “rugged” and/or “built for harsh environments”. Each component in our systems is specifically selected or designed based upon proven performance in harsh indoor and outdoor applications.

• Cutting Edge Technology

• Our digital double conversion on-line UPS, power conditioner and frequency/voltage converter solutions utilize high-efficiency power switching and galvanic isolation which provides ideal electrical output performance.

Systems are available with global voltage inputs & outputs, AC inputs & outputs, and DC inputs & outputs. You will be able to utilize any power source.

• Intelli Power offers power management software along with many standard communications protocols such as SNMP with OID and MIB

• Support, RS-232, Ethernet/IP – Common Industrial Protocol (CIP), MODBUS and Dry/Discrete Contacts. The sum total of these technological features equals the ultimate protection for your electronic equipment.

• Robust Product Portfolio

• No other UPS company offers 2,000+ variations. Utilizing Intelli Power’s building block methodology, more product features and functionality are provided; without having to extend lead times or change proven designs. Over the past 25 years, Intelli Power has developed its electronics hardware, firmware, embedded software and enclosure technology in house, which provides us with a unique capability to meet virtually any of your application requirements to include completely sealed systems.

• Designed and Manufactured in the USA

• The engineering and technological expertise within Intelli Power has enabled us to develop and field test products since 1988 to 100% user satisfaction. For you, this translates into shorter lead times from design to shipping as well as personalized service and support. Our mission is to provide you with the highest standard of customer support and quality control.

• ISO 9001: 2008 Certified

• Intelli Power is committed to customer satisfaction by delivering power system solutions and services that meet or exceed customer requirements through design innovation and continuous improvement.

• Enclosure Type: Hot Swap drawer

• Enclosure Dimensions: 3.2”H x 8.48”W x 18.2”D

• Enclosure Material and Finish: steel, powder coated charcoal gray

• Connector(s) EBP Group 1: 1 Straight Pin Domino self aligning

• Battery Type: 12V/5.2Ah Lead-Acid (VRLA), Battery P/N: CSB12580

• Battery Quantity Total: 8

• Battery Strings Quantity Total: 1

• Battery Voltage per String: 96 VDC

• Battery Runtime: 5 Minutes @ 2700 Watts

• Battery Mounting: Hot Swap Drawer

• Weight: 38 Lbs (17.2Kg)

• Temperature Operating: -15C to +50C

• Humidity: 5 to 95% non-condensing

FOI-4411-R-ST • Used in pairs, the FOI-4141 (to DCE) and FOI-4411 (to DTE) provide end-to-end conversion, extension and electrical isolation of RS-232 circuits up to a maximum data rate of 1Mbps. Multimode optics extends the distance to 2km, while single mode optics extends the distance to 20km.

• These units are transparent to all handshaking protocols and accept data and clock signals. A regeneration switch on the FOI-4141 allows users to toggle between synchronous applications that require send timing (ST) and asynchronous or synchronous applications that require terminal timing (TT).

• The units support tail circuit and null modem functions for DCE to DCE or DTE to DTE communications. An alternate interface (V.35 or RS-422) may be installed at the opposite end, allowing the user to create a link between two electrically incompatible interfaces without requiring a separate interface converter.

• The units can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Patton recommends “T” units for high security applications because they have been TEMPEST tested and approved.

• FOI units can be mounted in several redundant powering chassis; rack and wall mount options including Tempe stand NEMA alternatives.

• Features o Serial Data to Fiber supporting TIA/EIA -232, -423, -694,-723 and MIL-

STD-188C

o Supports Data Rates from DC to 1 Mbps o Multimode extension of up to 1.2 miles (2 km) o Single mode extension up to 12.4 miles (20 km) o Tail circuit and null modem functions for DCE to DCE or DTE to DTE o Can be paired with other FOI with V.35 or RS-422interfaces for interface conversion o Rugged metal enclosures with RFI shielding

FOI-4451-R-ST • Used in pairs, the FOI-4451 (to DCE) and FOI-4541 (to DTE) Serial to Fiber Converters provide end-to-end conversion, extension, and electrical isolation of EIA-530/RS-422circuits. Multimode optics extends the distance to 2km, while single mode optics extends the distance to 20km. TheFOI-4451 and FOI-4541 both provide complete electrical isolation for RS- 422 communications. The units can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI.

• Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. Patton recommends “T” units for high security applications because they have been TEMPEST tested and approved.

• The Serial to Fiber Converters are transparent to all hand shaking protocols and can accept data and clock signals up to 6.144 Mbps. A regeneration switch on the FOI-4451 enables users to toggle between synchronous applications that require send timing (ST), and asynchronous or synchronous applications that require terminal timing (TT). They support tail circuit and null modem functions for DCE to DCE or DTE to DTE communications. An alternate interface (V.35 or RS-232) may be installed at the opposite end creating isolated interface converter.

• Applications o A typical link consists of an FOI-4451 at the Data Communication

Equipment (to DCE) and an FOI-4541 at the Data Terminal Equipment (to DTE) with a duplex fiber optic cable between them.

• Features o Extends and Isolated EIA-530/RS-422 (MIL-STD-188-114Aand FED STD 1030A) Serial Data Over Fiber o Multimode extension of up to 1.2 miles (2 km), single mode extension up to

12.4 miles (20 km) o Single mode extension up to 12.4 miles (20 km) o Separate unit for DCE and DTE: FOI-4451 (to DCE) andFOI-4541 (to DTE) o Supports Data Rate from DC to 6.144 Mbps o Tail circuit and null modem functions for DCE to DCE or DTE to DTE o Pairs with other FOI with V.35 or RS-232 interfaces for interface conversion

FSP500-50FDB • Certified CB 62368-1 & CB 60950-1

• Meet 80 Plus Gold

• Design for 5,000 Meter above sea level

• High Reliability

• Low Ripple & Noise

• Over Current Protection

• Over Temperature Protection

• Over Voltage Protection

• FSP500

• General Specifications:

o Dimension (L x W x H): 150 x 81.5 x40.5(mm) o Environment: 5.9x 3.21 x 1.59 (inch) o Working Temperature: 0°Cto 50°C o Storage Temperature: -20°C to + 80°C o Efficiency: 80 Plus Gold o Working Humidity: 90% RH non-condensing o Storage Humidity: 90% RHnon-condensing o Hold-uptime: 115V / 60Hz: ≥16ms 230V / 50Hz:≥16ms o MTBF: 100,000 hours of continuous operation at 25°C, Max,-output load o Operating Altitude: 5,000 meters above sealevel o Applications: Workstation, Storage System, IPC Controller

• Input Voltage: 90-264Vac

• Input Frequency: 47-63Hz

• Input Current: 115Vac @ 6A, 230Vac @ 3A

I226-T1 • PCIe 3.1 x1 ultra compact Ethernet adapter designed for performance PCs, workstations, and enterprise, gaming, and home networks that need bandwidth beyond 1 GbE

• Core Specifications & Features o Interface: PCIe 3.1 x1, 5 GT/s bandwidth o Speeds: Supports 2.5 GbE, 1 GbE, 100 MbE, and 10 MbE without changing cabling o Port: Single RJ 45 port, compatible with CAT5e, CAT6, or CAT6A cables up to 100 m o Auto negotiation: IEEE 802.3 auto negotiation for speed, duplex, and flow control o Flow Control: IEEE 802.3x/802.3z compliant, with software controllable Rx thresholds and Tx pause frames o Packet Handling: 4 Tx/Rx queues per device for efficient prioritization and load balancing in multi core systems o Checksum Offload: Supports IP, SCTP, TCP, and UDP checksum offload

(IPv4/IPv6) to reduce CPU load o Power Management:

o Active State Power Management (ASPM) with compliance bit o Full wake on LAN (APM) o ACPI v2.0c support, D0/D3 states, and power managed speed control o Design: Ultra compact footprint, ventilated bracket for efficiency and reduced power consumption o Environmental Compliance: Lead free, low halogen, environmentally friendly

• Performance & Use Cases

• Optimized for low CPU overhead via advanced interrupt handling and intelligent packet routing

• Suitable for online gaming, remote work, and high bandwidth applications due to stable, low latency connectivity

• Easy integration into existing systems without cabling upgrades

• Cable Medium: Copper

• Cabling Type: CAT5e, CAT6, CAT6A

• Bracket Height: Low profile and full height

• Networking Specifications o Port Configuration: Single o Data Rate Per Port: 10/100/1000/2.5GBASE-T(TX) o Speed & Slot Width: 5 GT/s, x1 Lane o Controller: Intel(R) Ethernet Controller I226

• Package Specifications o System Interface Type: PCIe 3.1 (5 GT/s)

KSM24RD4/32

MEI

Other known PNs that meet requirement:

ML19200-

324K01-G)

• 32GB (1X32GB) 1.2V DDR4 2400MHZ PC4-19200 LRDIMM 2RX4

• SKU: ML19200-324K01-G

• Size: 32GB (1X32GB)

• Voltage: 1.2V

• Technical Specifications o Module Density: 32GB o Form Factor: LRDIMM o Technology Speed: DDR4 2400MHz PC4-19200 o Rank: 2Rx4 o Voltage: 1.2V o ECC: ECC o Buffered: Buffered

• Description o NEMIX RAM DDR4 2400MHZ PC4-19200 LRDIMM 2RX4 are manufactured using JEDEC standard 7-layer PCB Board built with Tier 1 chipset such as Samsung Micron or Hynix DRAM.

KV2004A • 4 port Wizard Desktop KVM switch designed for high end video and peripheral sharing between multiple computers.

• High End Video Support: Switches up to four computers that support DVI I video, USB keyboard/mouse, and analog audio.

• Resolution support: DVI D: up to 2560×1600 @ 60 Hz (or 2048×2048 @ 60 Hz)

• VGA: up to 1920×1200.

• USB True Emulation: Passes the full characteristics of connected USB peripherals (including keyboards and mice) to each system, avoiding limitations of traditional emulations. This enables instantaneous switching and hotkey support.

• Peripheral Sharing: Shares any four USB peripherals (e.g., keyboards, mice, USB drives) among the four systems.

• Audio Switching: Supports stereo audio that can be switched independently from the video signal.

• Switching Methods: Front push buttons

• Keyboard/Mouse Hotkeys

• RS 232/V.24 protocol

• Synchronous switching with other ServSwitch Wizard units via the options port.

• True DDC/EDID support: Ensures correct display mode detection and configuration.

• USB 2.0 transparency: Combines transparent USB 2.0 protocol with emulated keyboard/mouse control, plus dedicated USB ports for other peripherals.

• No OSD Switching: Does not support On Screen Display switching.

• No Video Format Conversion: Maintains the native video format of each connected system.

• Operating Temperature: 32 °F to 122 °F (0 °C to 50 °C).

• Enables to switch up to four computers

• Access up to four computers that support DVI-I video, USB keyboard and mouse, and analog audio

• Switch ports using front push buttons, mouse, and keyboard hotkeys

• Support for DVI resolutions up to 2560x1600 at 60Hz. and VGA resolutions up to 1920x1200

• True DDC EDID support

• Supports dual-link DVI-D, single-link DVI-D, and VGA

• Switched synchronously with other ServSwitch Wizard switches via the options port

• Stereo audio switches independently from the video signal

• General o Power External: 100-240 VAC/5VDC 2.5A o Video DVI-Dual Link: 2560 x 1600 at 60 Hz; DVI-single link: 1920 x 1200 at 60 Hz; VGA: 1920 x 1200 at 60 Hz

• Item Specifications o Connectors: (5) DVI-I (Female); (4) USB Type-A (Female); (4) USB Type- B (Female); (1) RJ45 (Female) options Port; (1) Barrel Power Jack; (5) 3.5-mm Audio Jacks o Dimensions: 1.64-in. H x 9.12-in. W x 4.32-in. D (42 x 232 x 110-mm) o Indicators: Multi-segment display control;

o (2) front-panel push button Computer and Mode o Weight: 1.86-lb. (0.84-kg)

• ServSwitch Wizard DVI Dual-Link (USB)

• Power Supply

• IEC 320 Power Cord

• User Manual on CD

• (2) 19" Rackmounting Brackets

KV2304A • High-end DVI KVM switching for multiple tri-head computers and USB devices.

• KVM Switch - Tri-Head, DVI-D Dual-Link, USB True Emulation, Audio, 4- Port

• Product Features o Enables a single user to control multiple computers o Switch DVI video, keyboard, and mouse streams to multiple CPUs o Each video head supports dual-link DVI video at up to 450 megapixels per second o Control all functions from a console with two high-resolution DVI screens o Supports video resolution up to 1920x1080 or boasts up to 2560x1600

(WQXGA)

o True emulation technology on switched USB 2.0 channels o Equipped with audio inputs on KVM and computer channels

• KVM switch centralizes and simplifies high-end, multi-head video switching access at a single user console with multiple DVI screens

• Advanced support for multiple high-speed USB devices, the ServSwitch Wizard DVI Dual-Link

• Multihead video channel access – simplified

• ServSwitch Wizard DVI Dual-Link enables a single KVM workstation user to control four separate computer systems or servers and flexibly share peripherals

• Switch features tri DVI-I video connectors on each of its four computer channels

• Computer channel on the ServSwitch Wizard DVI Dual-Link has USB Type B and 3.5-mm audio jack inputs

• Multicomputer and multiperipheral access

• General o Approvals: CE o Power Input: 100-240 VAC, 50-60 Hz;

o Output: 5 VDC, 2 A

• Item Specifications o Connectors (15) DVI-I (Female); (4) USB Type-A (Female); (4) USB Type-

B (Female); (1) RJ45 (Female) options Port; (1) Barrel Power Jack; (5) 3.5-mm Audio Jacks o Dimensions: 4-in. H (2.5 U) x 10.29-in. W x 5.96-in. D (102 x 261 x 151-mm) o Indicators: Multi-segment display control; (2) front-panel push button Computer and Mode o Weight: 3.25-lb. (1.48-kg)

• Product Includes:

o ServSwitch Wizard DVI Dual-Link KVM Switch Unit o AC Power Adapter o (4) Self-Adhesive Rubber Feet o Safety Guide

KVXLC-200-R2 • Product Features o Supports DVI-D video resolution up to 1920x1200 at 60 Hz o Local and remote units connect at distances of up to 330 feet (100m) using standard CAT5e/6 cables o Transparent USB 2.0 extension supports HID devices, mass storage devices o Supports RS-232 peripheral (serial) devices o Bi-directional audio via speaker/mic connection o Local DVI port loopback for monitoring on transmitter (TX) unit o Supports EDID pass-through o The KVX DVI-D KVM Extender lets you control a server or computer over a standard CAT5 or CAT6 UTP network cable connection at distances of up to 330 feet (100 meters). PC connection cables are included with this product, making it a solution that is ready to use right out of the box.

o Equipped with an RS-232 serial channel that connects to a serial terminal or to serial devices, such as touchscreens and barcode scanners. It eliminates the need for traveling back and forth between the local computer and remote console, making it an efficient and flexible solution.

o KVX also includes local video, allowing access to an additional monitor at the transmitter side. It's perfect for any situation that requires monitoring of connected PCs.

o This extender is TAA compliant and backed by free lifetime technical support. KVX is ideal for applications that require the console to be in a conveniently accessible location while the system equipment needs to reside in a safe place - away from dust, dirt, and harsh environmental influences. It also provides a cost-effective way of keeping sensitive data, such as financial and personal information, safe in a heavily secured data center while still allowing remote access to users.

• General o Housing Material: Metal Chassis o DDC Support: DDC, DDC2, DDC2B o Distance: CATx cable: Up to 328 ft. (100 m) o MTBF Transmitter (TX): 137,540 Hours o Receiver: (RX:) 165,620 Hours o Operating Humidity: 0 to 80%, noncondensing o Operating System: OS Independent o Operating Temperature: 32 to 122° F (0 to 50° C) o Power: External 5-VDC, 2-A Power Supply o Resolution: Maximum - 1920 x 1200 @ 60 Hz o Storage Temperature: -4 to +140° F (-20 to +60° C)

• Item Specifications o Connectors Video: (1) Single-Link DVI-D o Link Port: (1) RJ45;

o USB: (1) USB Type-B o Dimensions – Receiver: 1.06-in. H x 7.09-in. W x 3.27-in. D (2.7 x 18.0 x

8.3-cm) o Dimensions - Transmitter: 1.06-in. H x 7.09-in. W x 3.27-in. D (2.7 x 18.0 x 8.3-cm) o Indicators Transmitter: (1) Power LED;

o Receiver: (1) Power LED o Replaces: KVXLC-100 o Weight – Receiver: 0.84 lb. (0.38 kg) o Weight – Transmitter: 0.79 lb. (0.36 kg)

LH1690C-LC-

R2 (alt

LH1690C-LC-

R3)

• Gigabit Ethernet (1000-Mbps) Network Interface Card - Multimode, PCI-E, LC

• Ethernet network interface with packet processing brings fiber to the desktop for improved performance and higher bandwidth at 1000-Mbps speeds.

• Product Features o Compatible with many operating systems.

o LC connectors for attaching multimode 850nm 550m fiber with 220m range.

o Supports 802.1P/Q VLAN tag.

o IP multicast filter to conserve bandwidth.

o PCI-E (Rev. 1.1 compliant) interface installs easily in a PCIe x1 slot.

o IEEE 802.3x full-duplex flow control.

o Jumbo frame support for packet-heavy network traffic.

o RealTek RTL8168 chipset.

• General o CE Approval: Yes o Compliance: EMI Standard, FCC Class B o Fiber Cable Supported: 62.5-/125-µm, 50-/125 µm multimode o Operation: Full-duplex with NWay flow control o Power: From the PCI-e bus; maximum 5 W +3.3 VDC at 1.5 A o Protocols Supported: Failover o RoHS: Yes o Software Supported: Windows OS o Speed: 1000-Mbps o Standards: IEEE 802.3z Gigabit Ethernet 1000BASE-SX, IEEE 802.3x full-duplex flow control, IEEE 802.1Q VLANs, LACP IEEE 802.3ad, )/ IEEE 802.3ad-draft static

• Item Specifications o Connectors: (1) Duplex LC o Indicators LEDs on bracket: (1) LINK/ACT, (1) FDX

PWR-AC-FAIL • Key Features o Function: Detects AC power failure and provides an ON/OFF indication to the Base Unit (e.g., BASE-WIRED).

o Alerting: By default, sends alerts via email, SMS, and SNMP traps through the Base Unit.

o Server Shutdown: Can be configured to safely shut down servers when a power failure is detected.

• Power Source:

o External AC adapter plugs into the main power line.

o Sensor itself powered by a UPS so it remains operational during outages.

• Connectivity:

o RJ45 cable from Base Unit to sensor (CAT 6/7 recommended, up to 100 m).

o Supports Modbus TCP/RTU, SNMP, MQTT, RS-485 for integration with network management systems or custom gateways.

o Integration: Out-of-the-box support for SNMP, Modbus, and optional

MQTT for Industrial IoT; RS-485 available via optional module.

o Customization: Available in custom color and logo options.

o Enclosure: Steel, industrial-grade, suitable for non-power or non-IP sensors.

o Mounting: 0U rack, DIN rail, magnetic, or wall mountable.

• Technical Specifications o Input: Auto switching 90–240 VAC, 47–63 Hz o Output: 9 VDC, 1.5 A, 2 m cord, 2.1 mm center-positive plug o Power Usage: 216 mW o Operating Temperature: 0 °C to +40 °C (some datasheets list -40 °C to

+75 °C) o Humidity: 5–95% RH (non-condensing) o Dimensions: ~72 mm × 69 mm × 23 mm (0.24 kg / 0.53 lbs)

RJFTV21G • Key Features & Specifications o Type: Modular Ethernet connector (8P8C, Cat5e) o Gender: Female receptacle (female RJ45) o Mounting: Panel mount with square flange, straight orientation o Shielding: Unshielded (standard version) o Construction: Metal shell (aluminum, olive drab cadmium plating; other finishes available) o Plating: Nickel (standard) or other platings depending on variant o Operating Temperature: -40°C to +85°C o Flammability: UL94 V 0 o Environmental Rating: IP67/IP68 (dust tight, waterproof) o Coupling: Tri Start thread (MIL DTL 38999 Series III) with anti-decoupling device o Mechanical Coding/Polarization: 4 positions for correct mating o Cable Retention: 100 N axial force o Mating Cycles: 500+ o Cable Diameter Range: 6 mm to 13 mm (varies by ruggedized version) o Applications: Ethernet (Cat5e, Cat6, Cat6A), rugged environments such as battlefield comms, C4ISR, armored vehicles, rail, mass transit Amphenol Socapex o Compliance: RoHS not compliant (standard version); REACH SVHC compliant; radiation hardening not applicable o Weight: ~1.41 oz (standard) o Ruggedized Version Highlights Amphenol Socapex o Sealed against fluids and dusts (IP68) o Shock and vibration resistance (IK06, NAS 1599 tested) o Marine bronze shell option for corrosion resistance o Compatible with Cat5e, Cat6, and Cat6A Ethernet standards

RJFTV21RAG • Type & Configuration: Modular coupler connector jack, 8P8C (RJ45) to 8P8C

(RJ45)

• Performance Category: Cat 5e (supports up to 1000 Mbps Ethernet)

• Shielding: Shielded (reduces EMI/RFI interference)

• Coupling Mechanism: Circular threaded coupling for secure, repeatable connections

• Panel mount with square flange

• Right angle orientation for space efficient installation

• Operating Temperature Range: -40 °C to +85 °C

• IP Rating: IP68 (dust tight and submersible)

• Flammability Rating: UL 94 V 0

• Number of Contacts/Positions: 8 contacts, 8 positions per port

• Gender: Female jack (receptacle)

• Application: Ethernet networking, especially 1000 Base T installations

• Finish: Aluminum shell, olive drab cadmium plating

• RoHS Compliance: Non-compliant (lead content may be present)

• Packaging: Typically shipped in factory packs of 10

• Series: RJFTV

SE-02108-01 • Key Specifications o ESD (Electrostatic Discharge) protection o PCIe x1–x16 slots o MIL STD 1397C Type A/B/C/H interfaces o Full duplex input/output o Software selectable NTDS type o On board time stamping (125 ns resolution) o Field reprogrammable FPGA for updates IXI Technology+1

• General Product Features o Input Mode Features Separate or combined data and command word buffers Input command words, stop on data word Input data words, stop on command word Passive tap mode o Output Mode Features Concurrent data and command buffer operation Time-out Mode Features Time-out values in 10μs or 1ms increments Time-out between words and/or total transfer times

Start time-out at beginning of operation or upon transfer of the first word

• NTDS Connector Compatibility o Connector compatible with Parallel NTDS board

• Technical Specs o NTDS Interface o MIL-STD-1397C Parallel Types A, B, C or H o PCIe Bus Interface o PCI Express Base Specification, Revision 1.0a o Input Buffer o 64K x 32-bit FIFO o NTDS I/O Connectors o 120 pin HDC o Form Factor o Standard Height or Low Profile o Weight: Less than or equal to 4.5 oz.

o Power Consumption: Average power consumption: 4.956W Average

+3.3V current draw: 0.92A o Average +12V current draw: 0.16A o Temperature Operating: 0°C to +55°C Storage: -41°C to +71°C o Shock MIL-STD-810F, method 516.4, procedure VI (bench handling) o Vibration Random: 20-200Hz/0.01 g²/Hz Sine Peak: 5-28Hz/1g o Relative Humidity 0% to 95% (non-condensing) o Altitude Operating: 10,000 ft.

o Storage: 40,000 ft.

o MTBF >150,000 hours calculated per MIL-HDBK-217F @ 30 degrees C, ground benign SE-02108-07-LC • Key Salient Characteristics o High Performance NTDS Interface: Supports MIL STD 1397C Type A, B, C, or H protocols, enabling secure, low latency communication between control systems, sensors, and other mission critical components tazob.com.

o 120 Pin HDC Connector: Provides a robust, secure connection for high-speed data transfer, compatible with existing Swift PCIe NTDS networks tazob.com.

o Long Cable Drive Capability: Engineered to handle cable runs up to 500 ft (152 m), making it suitable for extended reach applications tazob.com.

o High Speed PCIe Interface: Compatible with x1, x2, x4, x8, or x16 PCIe slots, allowing integration into a wide range of servers and workstations o Full Duplex Operation: Hardware independent input/output channels support simultaneous input and output, with software selectable NTDS type for quick reconfiguration o On Board Time Stamp Generator: Tags input words with 125…