Gen_Rqrmnts_13R4001.pdf

N62470-13-R-4001 July 1, 2013

GENERAL REQUIREMENTS

1. NAVFAC Solicitation Number: N62470-13-R-4001

2. Title: Provide four 7.5-Ton and one 5-Ton Under running Under hung Hoist Overhead Electric

Traveling Cranes

3. Location of Work: Rotary Aircraft Depot Maintenance Facility, Naval Base Coronado, San Diego, California

4. Outline of Scope: The intent of this specification is to procure five under running bridge, under hung hoist, pendant controlled, overhead electric traveling (OET) cranes. The capacity of four cranes shall be 7.5-ton and the remaining crane shall be a 5-ton capacity. A 7.5-ton crane will be located in the Structural Bay (Rm. 101), Assembly/Disassembly Bay (Rm. 102), MOD/ISR Bay (Rm. 103), and MOD/ISR Bay (Rm. 104). The 5-ton crane will be located in the Tail Pylon MGB (Rm. 134). Each 7.5-ton crane shall have three runway rails and the 5-ton crane shall have two runway rails. All cranes will be installed in the Rotary Aircraft Depot Maintenance Facility, NAVBASE Coronado, San Diego, California. The cranes shall be built to the design drawings of a registered professional engineer. The cranes shall be designed, fabricated, assembled, shop tested, delivered, installed, inspected, field tested, and made ready for use in accordance with this specification. The cranes’ capacity, span, and hook travel shall be as follows:

Location Capacity (lbs.) Span (ft-in) Runway (ft-in) Hook Lift (ft-in) Appendix

Room 101 15,000 66’-0” 195’-8” 34’-0” A-1

Room 102 15,000 66’-0” 169’-8” 34’-0” A-2

Room 103 15,000 66’-0” 169’-8” 34’-0” A-2

Room 104 15,000 66’-0” 195’-8” 34’-0” A-1

Room 134 10,000 36’-0” 66’-6” 16’-0” A-3

NOTE: All span and runway dimensions are approximate. Final values shall be verified by the Contractor.

The contractor shall provide all labor, supervision, engineering, design, materials, equipment, tools, parts, supplies, and transportation to perform all of the services in accordance with the specification. See specification and related documents for more information.

5. Time for Completion: The period of performance for CLINS 0001, 0002, 0003, 0004 and 0005 will be 13 months including delivery, installation and Government acceptance testing.

6. Site Visit: There will NOT be an on-site Pre-Proposal Conference. A telephone conference is scheduled for July 10, 2013 at 2:00 p.m. (ET).

7. Evaluation Factors: The solicitation requires the evaluation of “Price Only.” The basis of evaluation for price will consist of the total price of all contract line items (CLINs) stating the basic contract requirements (see price proposal form).

8. Submittal Requirements: Prices shall be submitted on the attached "Price Proposal Form" along with the Bid Bond. See Attachment 1 for the Price Proposal Form.

9. Basis for Award: The Lowest Priced offer that is responsive and responsible will be considered for award. The Contracting Officer will also consider past performance on earlier WHEMAC delivery orders, including quality, schedule, management, and safety in the basis for award.

10. Bond Requirements: A Standard Form 24, Bid Bond in the amount of 20% is required with proposal submission. Performance and Payment Bonds are required from the contract delivery order awardee 10 calendar days after date of award.

11. Clauses: Clauses in the basic contract and subsequent modifications are applicable to this delivery order. Your attention is specifically directed to the following clauses, which are applicable to this delivery order:

FAR 52.211-11, Liquidated Damages – Supplies, Services, or Research and Development FAR 52.222-6, Davis-Bacon Act FAR 52.222-7, Withholding of Funds FAR 52.222-8, Payrolls and Basic Records FAR 52.222-9, Apprentices and Trainees FAR 52.222-10, Compliance with Copeland Act Requirements FAR 52.222-11, Subcontracts (Labor Standards) FAR 52.222-12, Contract Termination-Debarment FAR 52.222-13, Compliance with Davis-Bacon and Related Act Regulations FAR 52.222-14, Disputes Concerning Labor Standards FAR 52.222-15, Certification of Eligibility FAR 52.222-20, Walsh-Healey Public Contracts Act FAR 52.232-16 Progress Payments FAR 52.236-2 Differing Site Conditions FAR 52.236-3 Site Investigation and Conditions Affecting the Work FAR 52.236-4 Physical Data FAR 52.236-5 Material and Workmanship FAR 52.236-6 Superintendence by the Contractor FAR 52.236-7 Permits and Responsibilities.

FAR 52.236-8 Other Contracts FAR 52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements FAR 52.236-10 Operations and Storage Areas FAR 52.236-11 Use & Possession Prior to Completion FAR 52.236-12 Cleaning Up FAR 52.236-13 Accident Prevention FAR 52.236-21 Specifications and Drawings for Construction DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials DFARS 252.211-7003 Item Identification and Valuation DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7004 DoD progress payment rates DFARS 252.232-7006 Wide Area Workflow Payment Instruction DFARS 252.236-7000, Modification Proposals--Price Breakdown DFARS 252.236-7001, Contract Drawings and Specifications DFARS 252.247-7023 Transportation of Supplies by Sea NFAS 5252.236-9303 Accident Prevention

The full text of a solicitation/contract provisions or clauses may be accessed electronically at these addresses:

http://www.arnet.gov/far http://farsite.hill.af.mill/VFDFARA.HTM https://acquisition.navy.mil/rda/home/policy_and_guidance/nmcars

12. Liquidated Damages: See FAR 52.211-11, Liquidated Damages -- Supplies, Services, or Research and Development. The following liquidated damages rates are applicable:

CLIN 0001: $200.00 per day CLIN 0002: $200.00 per day CLIN 0003: $200.00 per day CLIN 0004: $200.00 per day CLIN 0005: $200.00 per day

13. Contractor Performance: Contractor’s performance will be evaluated using the respective contractor performance evaluation report entry system located on the website http://www.cpars.csd.disa.mil/. Prior to commencement of work the contractor is required to provide the government with the name, phone number and e-mail address of the “Contractor’s Representative” that will be responsible for receipt and review of draft performance evaluations prepared by the government in the appropriate system. It is the contractor’s responsibility to keep this contact information current

14. Required Insurance

(a) The contractor shall procure and maintain during the entire period of this performance under this contract the following minimum insurance:

COVERAGE

Type of Insurance: Per Person Per Accident Property

General Liability $ 500,000.00

Automobile $200,000.00 $ 500,000.00 $ 20,000.00 Liability Workmen’s As Required Under FAR 28.307-2 Compensation (Other as required by State Law)

(b) A Certificate of Insurance shall be submitted to the Contracting Officer for review and approval. No work shall commence until this notice has been presented to the Contracting Officer. Refer to FAR clause 52.228-5, Insurance- Work on a Government Installation.

(c) The only wording that is acceptable to the Government in the Cancellation section of the Certificate of Insurance is the endorsement stating:

"ANY CANCELLATION OR MATERIAL CHANGE IN THE COVERAGE

ADVERSELY AFFECTING THE GOVERNMENT'S INTEREST SHALL

NOT BE EFFECTIVE UNTIL 30 DAYS AFTER THE INSURER GIVES

WRITTEN NOTICE TO THE CERTIFICATE HOLDER."

The Certificate Holder will be the Commander NAVFAC Atlantic, Navy Crane Center, Norfolk Naval Shipyard, Bldg 491, Portsmouth, VA 23709-5000.

15. Labor and Construction Requirements: The delivery order is subject to the Walsh-Healey Public Contracts Act with includes some construction in connection with on-site work. The Davis-Bacon Act applies to all on-site installation and demolition/removal activities. The applicable Davis-Bacon Act Wage Determination is provided within this document below. The following FAR, DFARS and NFAS clauses are applicable:

FAR 52.222-20, Walsh-Healey Public Contracts Act

Davis-Bacon Act and Construction Clauses:

FAR 52.222-6, Davis-Bacon Act FAR 52.222-7, Withholding of Funds FAR 52.222-8, Payrolls and Basic Records FAR 52.222-9, Apprentices and Trainees FAR 52.222-10, Compliance with Copeland Act Requirements FAR 52.222-11, Subcontracts (Labor Standards) FAR 52.222-12, Contract Termination-Debarment FAR 52.222-13, Compliance with Davis-Bacon and Related Act Regulations FAR 52.222-14, Disputes Concerning Labor Standards FAR 52.222-15, Certification of Eligibility FAR 52.236-2 Differing Site Conditions FAR 52.236-3 Site Investigation and Conditions Affecting the Work FAR 52.236-4 Physical Data FAR 52.236-5 Material and Workmanship FAR 52.236-6 Superintendence by the Contractor FAR 52.236-7 Permits and Responsibilities FAR 52.236-8 Other Contracts FAR 52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements FAR 52.236-10 Operations and Storage Areas FAR 52.236-11 Use & Possession Prior to Completion FAR 52.236-12 Cleaning Up FAR 52.236-13 Accident Prevention FAR 52.236-21 Specifications and Drawings for Construction DFARS 252.236-7000, Modification Proposals--Price Breakdown DFARS 252.236-7001, Contract Drawings and Specifications NFAS 5252.236-9303 Accident Prevention

16. Wage Determination #CA130001 is attached (see Attachment 2).

17. Proposal Due Date: Thursday, August 1, 2013 at 2:00 P.M. (ET)

Mailing Address:

DIRECTOR, NAVY CRANE CENTER

NAVAL FACILITIES ENGINEERING COMMAND

BUILDING 491, PORTSMOUTH, VIRGINIA 23709-5000

ATTN: BARBARA SPRUILL (757) 967-3819

18. Pre-Proposal Inquiries: ALL INQUIRIES MUST BE SUBMITTED IN WRITING USING

ATTACHMENT 3 (GOVERNMENT PREAWARD INQUIRY FORM) TO THE CONTRACT

SPECIALIST, BARBARA SPRUILL, VIA EMAIL: barbara.t.spruill@navy.mil.

19. WHEMAC Contract Holders: PROPOSALS WILL ONLY BE ACCEPTED FROM THE

FOLLOWING LIST OF CONTRACTORS ON THE WEIGHT HANDLING EQUIPMENT MULTIPLE

AWARD CONTRACT (WHEMAC):

Heco-Pacific Manufacturing, Inc., 1510 Pacific Street, Union City, CA 94587 (Contract N62470-10-D-8000)

Advanced Crane Technologies, 11 Vanguard Drive, Reading, PA 19606 (Contract N62470-10-D-8003)

Crane Technologies Inc., 1954 Rochester Industrial Drive, Rochester Hills, MI 48309 (Contract N62470-10-D-8004)

American Crane and Equipment Corp., 531 Old Swede Road, Douglassville, PA 19518 (Contract N62470-10-D-8005)

ATTACHMENT 1

PRICE PROPOSAL FORM

NAVFAC SOLICITATION N62470-13-R-4001

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 7.5 TON UNDER RUNNING BRIDGE 1 EA $ $

UNDER HUNG HOIST OET CRANE

Design, fabricate, assemble, deliver, install, inspect and field test One (1) under running, under hung hoist, pendant controlled, overhead electric traveling (OET) crane in Structural Bay (Room 101) at the Rotary Aircraft Depot maintenance Facility, Naval Base Coronado, San Diego, California, in accordance with the drawings and specifications

Upon acceptance of the crane, 3% of CLIN 0001 will be withheld until completion of the one year warranty period.

0002 7.5 TON UNDER RUNNING BRIDGE 1 EA $ $

UNDER HUNG HOIST OET CRANE

Design, fabricate, assemble, deliver, install, inspect and field test One (1) under running, under hung hoist, pendant controlled, overhead electric traveling (OET) crane in Assembly/Disassembly Bay (Room 102) at the Rotary Aircraft Depot maintenance Facility, Naval Base Coronado, San Diego, California, in accordance with the drawings and specifications

Upon acceptance of the crane, 3% of CLIN 0002 will

0003 7.5 TON UNDER RUNNING BRIDGE 1 EA $ $

UNDER HUNG HOIST OET CRANE

pendant controlled, overhead electric traveling (OET) crane in MOD/ISR Bay (Room 103) at the Rotary Aircraft Depot maintenance Facility, Naval Base Coronado, San Diego, California, in accordance with the drawings and specifications

Upon acceptance of the crane, 3% of CLIN 0003 will

0004 7.5 TON UNDER HUNG 1 EA $ $

UNDER RUNNING CRANE

pendant controlled, overhead electric traveling (OET) crane in MOD/ISR Bay (Room 104) at the Rotary Aircraft Depot maintenance Facility, Naval Base Coronado, San Diego, California, in accordance with the drawings and specifications

Upon acceptance of the crane, 3% of CLIN 0004 will

0005 5 TON UNDER HUNG, UNDER 1 EA $ $

RUNNING CRANE

pendant controlled, overhead electric traveling (OET) crane in Tail Pylon MGB (Room 134) at the Rotary Aircraft Depot maintenance Facility, Naval Base Coronado, San Diego, California, in accordance with the drawings and specifications.

Upon acceptance of the crane, 3% of CLIN 0005 will

TOTAL PRICE OF CLINS 0001, 0002, 0003, 0004, AND 0005 $

1.2 CONTRACT LINE ITEM NOTES

a. At time of award, a separate CLIN will be created for the 3% withholding from CLINS 0001, 0002, 0003, 0004 and 0005 for warranty period performance. In the event there is a difference between a unit price and the extended total, the unit price will be held to be the intended bid. If the offeror shows only the total price, but fails to enter a unit price, the total divided by the estimated quantity will be held to the intended unit price.

c. The Government may reject an offer as non-responsive if it is materially unbalanced as to prices for the basic requirement. An offer is unbalanced when it is based on prices significantly less than cost for some work and prices which are significantly higher for other work.

d. Amendments Acknowledged:

Amendment No. Date Amendment No. Date

Offeror:

Address:

Phone:

Fax & email

Signature

Date:

ATTACHMENT 2

General Decision Number: CA130001 05/31/2013 CA1

Superseded General Decision Number: CA20120001

State: California

Construction Types: Building, Heavy (Heavy and Dredging), Highway and Residential

County: San Diego County in California.

BUILDING CONSTRUCTION PROJECTS; DREDGING PROJECTS (does not include hopper dredge work); HEAVY CONSTRUCTION PROJECTS (does not include water well drilling); HIGHWAY CONSTRUCTION PROJECTS; RESIDENTIAL CONSTRUCTION PROJECTS (consisting of single family homes and apartments up to and including 4 stories)

Modification Number Publication Date 0 01/04/2013 1 01/18/2013 2 03/01/2013 3 03/08/2013 4 03/22/2013 5 04/12/2013 6 05/10/2013 7 05/31/2013

ASBE0005-002 06/28/2010

Rates Fringes

Asbestos Workers/Insulator (Includes the application of all insulating materials, protective coverings, coatings, and finishes to all types of mechanical systems).....$ 32.79 16.31 Fire Stop Technician (Application of Firestopping Materials for wall openings and penetrations in walls, floors, ceilings and curtain walls)...........................$ 24.21 13.76

ASBE0005-004 06/28/2010

Rates Fringes

Asbestos Removal worker/hazardous material handler (Includes preparation, wetting, stripping, removal, scrapping, vacuuming, bagging and disposing of all insulation materials from mechanical systems, whether they contain asbestos or not)....$ 18.70 8.65

* BOIL0092-003 10/01/2012

Rates Fringes

BOILERMAKER......................$ 41.17 28.27

BRCA0004-008 11/01/2012

Rates Fringes

BRICKLAYER; MARBLE SETTER........$ 33.75 14.55

BRCA0018-004 06/01/2012

Rates Fringes

MARBLE FINISHER..................$ 27.04 10.66

TILE FINISHER....................$ 22.37 9.19

TILE LAYER.......................$ 33.55 13.55

BRCA0018-010 09/01/2009

Rates Fringes

TERRAZZO FINISHER................$ 26.59 9.62

TERRAZZO WORKER/SETTER...........$ 33.63 10.46

CARP0409-002 07/01/2008

Rates Fringes

Diver

(1) Wet.....................$ 663.68 9.82

(2) Standby.................$ 331.84 9.82

(3) Tender..................$ 323.84 9.82

(4) Assistant Tender........$ 299.84 9.82

Amounts in "Rates' column are per day

CARP0409-008 08/01/2010

Rates Fringes

Modular Furniture Installer......$ 17.00 7.41

CARP0547-001 07/01/2009

Rates Fringes

CARPENTER

(1) Bridge.................$ 37.28 10.58

(2) Commercial Building....$ 32.30 10.58

(3) Heavy & Highway........$ 37.15 10.58

(4) Residential Carpenter..$ 25.84 10.58

(5) Residential Insulation Installer........$ 18.00 8.16

MILLWRIGHT.......................$ 37.65 10.58

PILEDRIVERMAN....................$ 37.28 10.58

CARP0547-002 07/01/2009

Rates Fringes

Drywall

(1) Work on wood framed construction of single family residences, apartments or condominiums under four stories Drywall Installer/Lather...$ 21.00 8.58 Drywall Stocker/Scrapper...$ 11.00 6.67

(2) All other work Drywall Installer/Lather...$ 27.35 9.58 Drywall Stocker/Scrapper...$ 11.00 6.67

ELEC0569-001 08/27/2012

Rates Fringes

Electricians (Tunnel Work) Cable Splicer...............$ 43.05 3%+11.87 Electrician.................$ 42.30 3%+11.87 Electricians: (All Other Work, Including 4 Stories Residential) Cable Splicer...............$ 38.35 3%+11.87 Electrician.................$ 37.60 3%+11.87

ELEC0569-005 12/01/2012

Rates Fringes

Sound & Communications Sound Technician............$ 27.57 3%+10.81 Soundman....................$ 22.06 3%+9.17

SOUND TECHNICIAN: Terminating, operating and performing final check-out

SOUNDMAN: Wire-pulling, splicing, assembling and installing devices

SCOPE OF WORK Assembly, installation, operation, service and maintenance of components or systems as used in closed circuit television, amplified master television distribution, CATV on private property, intercommunication, burglar alarm, fire alarm, life support and all security alarms, private and public telephone and related telephone interconnect, public address, paging, audio, language, electronic, background music system less than line voltage or any system acceptable for class two wiring for private, commercial, or industrial use furnished by leased wire, frequency modulation or other recording devices, electrical apparatus by means of which electricity is applied to the amplification, transmission, transference, recording or reproduction of voice, music, sound, impulses and video.

Excluded from this Scope of Work - transmission, service and maintenance of background music. All of the above shall include the installation and transmission over fiber optics.

ELEC0569-006 02/25/2013

Work on street lighting; traffic signals; and underground systems and/or established easements outside of buildings

Rates Fringes

Traffic signal, street light and underground work Utility Technician #1.......$ 27.50 3%+7.42 Utility Technician #2.......$ 22.65 3%+7.42

STREET LIGHT & TRAFFIC SIGNAL WORK:

UTILITY TECHNICIAN #1: Installation of street lights and traffic signals, including electrical circuitry, programmable controller, pedestal-mounted electrical meter enclosures and laying of pre-assembled cable in ducts. The layout of electrical systems and communication installation including proper position of trench depths, and radius at duct banks, location for manholes, street lights and traffic signals.

UTILITY TECHNICIAN #2: Distribution of material at jobsite, installation of underground ducts for electrical, telephone, cable TV land communication systems. The setting, leveling, grounding and racking of precast manholes, handholes and transformer pads.

ELEC0569-008 06/01/2011

Rates Fringes

ELECTRICIAN (Residential, 1-3 Stories).........................$ 22.37 3%+2.90

ELEC1245-001 06/01/2012

Rates Fringes

LINE CONSTRUCTION

(1) Lineman; Cable splicer..$ 48.95 14.05

(2) Equipment specialist (operates crawler tractors, commercial motor vehicles, backhoes, trenchers, cranes (50 tons and below), overhead & underground distribution line equipment)...........$ 39.09 12.97

(3) Groundman...............$ 29.91 12.70

(4) Powderman...............$ 43.71 13.15

HOLIDAYS: New Year's Day, M.L. King Day, Memorial Day, Independence Day, Labor Day, Veterans Day, Thanksgiving Day and day after Thanksgiving, Christmas Day

ELEV0018-001 01/01/2013

Rates Fringes

ELEVATOR MECHANIC................$ 48.23 25.185

FOOTNOTE:

PAID VACATION: Employer contributes 8% of regular hourly rate as vacation pay credit for employees with more than 5 years of service, and 6% for 6 months to 5 years of service.

PAID HOLIDAYS: New Years Day, Memorial Day, Independence Day, Labor Day, Veterans Day, Thanksgiving Day, Friday after Thanksgiving, and Christmas Day.

ENGI0012-003 07/01/2012

Rates Fringes

OPERATOR: Power Equipment (All Other Work)

GROUP 1....................$ 37.40 20.00

GROUP 2....................$ 38.18 20.00

GROUP 3....................$ 38.47 20.00

GROUP 4....................$ 39.96 20.00

GROUP 5....................$ 41.06 20.00

GROUP 6....................$ 40.18 20.00

GROUP 8....................$ 41.39 20.00

GROUP 9....................$ 40.41 20.00

GROUP 10....................$ 40.41 20.00

GROUP 11....................$ 40.58 20.00

GROUP 12....................$ 40.58 20.00

GROUP 13....................$ 40.68 20.00

GROUP 14....................$ 40.71 20.00

GROUP 15....................$ 40.79 20.00

GROUP 16....................$ 40.91 20.00

GROUP 17....................$ 41.08 20.00

GROUP 18....................$ 41.18 20.00

GROUP 19....................$ 41.29 20.00

GROUP 20....................$ 41.41 20.00

GROUP 21....................$ 41.58 20.00

GROUP 22....................$ 41.68 20.00

GROUP 23....................$ 41.79 20.00

GROUP 24....................$ 41.91 20.00

GROUP 25....................$ 42.08 20.00

OPERATOR: Power Equipment (Cranes, Piledriving & Hoisting)

GROUP 1....................$ 38.75 20.00

GROUP 2....................$ 39.53 20.00

GROUP 3....................$ 39.82 20.00

GROUP 4....................$ 39.96 20.00

GROUP 5....................$ 40.18 20.00

GROUP 6....................$ 40.29 20.00

GROUP 7....................$ 40.41 20.00

GROUP 8....................$ 40.58 20.00

GROUP 9....................$ 40.75 20.00

GROUP 10....................$ 41.75 20.00

GROUP 11....................$ 42.75 20.00

GROUP 12....................$ 43.75 20.00

GROUP 13....................$ 44.75 20.00

OPERATOR: Power Equipment (Tunnel Work)

GROUP 1....................$ 39.25 20.00

GROUP 2....................$ 40.03 20.00

GROUP 3....................$ 40.32 20.00

GROUP 4....................$ 40.46 20.00

GROUP 5....................$ 40.68 20.00

GROUP 6....................$ 40.79 20.00

GROUP 7....................$ 40.91 20.00

PREMIUM PAY:

$3.75 per hour shall be paid on all Power Equipment Operator work on the followng Military Bases: China Lake Naval Reserve, Vandenberg AFB, Point Arguello, Seely Naval Base, Fort Irwin, Nebo Annex Marine Base, Marine Corp Logistics Base Yermo, Edwards AFB, 29 Palms Marine Base and Camp Pendleton

Workers required to suit up and work in a hazardous material environment: $2.00 per hour additional. Combination mixer and compressor operator on gunite work shall be classified as a concrete mobile mixer operator.

SEE ZONE DEFINITIONS AFTER CLASSIFICATIONS

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Bargeman; Brakeman; Compressor operator; Ditch Witch, with seat or similar type equipment; Elevator operator-inside; Engineer Oiler; Forklift operator (includes loed, lull or similar types under 5 tons;

Generator operator; Generator, pump or compressor plant operator; Pump operator; Signalman; Switchman

GROUP 2: Asphalt-rubber plant operator (nurse tank operator);

Concrete mixer operator-skip type; Conveyor operator;

Fireman; Forklift operator (includes loed, lull or similar types over 5 tons; Hydrostatic pump operator; oiler crusher (asphalt or concrete plant); Petromat laydown machine; PJU side dum jack; Screening and conveyor machine operator (or similar types); Skiploader (wheel type up to 3/4 yd.

without attachment); Tar pot fireman; Temporary heating plant operator; Trenching machine oiler

GROUP 3: Asphalt-rubber blend operator; Bobcat or similar type (Skid steer); Equipment greaser (rack); Ford Ferguson (with dragtype attachments); Helicopter radioman (ground);

Stationary pipe wrapping and cleaning machine operator

GROUP 4: Asphalt plant fireman; Backhoe operator (mini-max or similar type); Boring machine operator; Boxman or mixerman (asphalt or concrete); Chip spreading machine operator;

Concrete cleaning decontamination machine operator;

Concrete Pump Operator (small portable); Drilling machine operator, small auger types (Texoma super economatic or similar types - Hughes 100 or 200 or similar types -drilling depth of 30' maximum); Equipment greaser (grease truck); Guard rail post driver operator; Highline cableway signalman; Hydra-hammer-aero stomper; Micro Tunneling (above ground tunnel); Power concrete curing machine operator; Power concrete saw operator; Power-driven jumbo form setter operator; Power sweeper operator; Rock Wheel Saw/Trencher; Roller operator (compacting); Screed operator (asphalt or concrete); Trenching machine operator (up to 6 ft.); Vacuum or much truck

GROUP 5: Equipment Greaser (Grease Truck/Multi Shift).

GROUP 6: Articulating material hauler; Asphalt plant engineer; Batch plant operator; Bit sharpener; Concrete joint machine operator (canal and similar type); Concrete planer operator; Dandy digger; Deck engine operator;

Derrickman (oilfield type); Drilling machine operator, bucket or auger types (Calweld 100 bucket or similar types

- Watson 1000 auger or similar types - Texoma 330, 500 or 600 auger or similar types - drilling depth of 45' maximum); Drilling machine operator; Hydrographic seeder machine operator (straw, pulp or seed), Jackson track maintainer, or similar type; Kalamazoo Switch tamper, or similar type; Machine tool operator; Maginnis internal full slab vibrator, Mechanical berm, curb or gutter(concrete or asphalt); Mechanical finisher operator (concrete, Clary-Johnson-Bidwell or similar); Micro tunnel system (below ground); Pavement breaker operator (truck mounted);

Road oil mixing machine operator; Roller operator (asphalt or finish), rubber-tired earth moving equipment (single engine, up to and including 25 yds. struck); Self-propelled tar pipelining machine operator; Skiploader operator (crawler and wheel type, over 3/4 yd. and up to and including 1-1/2 yds.); Slip form pump operator (power driven hydraulic lifting device for concrete forms);

Tractor operator-bulldozer, tamper-scraper (single engine, up to 100 h.p. flywheel and similar types, up to and including D-5 and similar types); Tugger hoist operator (1 drum); Ultra high pressure waterjet cutting tool system operator; Vacuum blasting machine operator

GROUP 8: Asphalt or concrete spreading operator (tamping or finishing); Asphalt paving machine operator (Barber Greene or similar type); Asphalt-rubber distribution operator;

Backhoe operator (up to and including 3/4 yd.), small ford, Case or similar; Cast-in-place pipe laying machine operator; Combination mixer and compressor operator (gunite work); Compactor operator (self-propelled); Concrete mixer operator (paving); Crushing plant operator; Drill Doctor;

Drilling machine operator, Bucket or auger types (Calweld 150 bucket or similar types - Watson 1500, 2000 2500 auger or similar types - Texoma 700, 800 auger or similar types -drilling depth of 60' maximum); Elevating grader operator;

Grade checker; Gradall operator; Grouting machine operator;

Heavy-duty repairman; Heavy equipment robotics operator;

Kalamazoo balliste regulator or similar type; Kolman belt loader and similar type; Le Tourneau blob compactor or similar type; Loader operator (Athey, Euclid, Sierra and similar types); Mobark Chipper or similar; Ozzie padder or similar types; P.C. slot saw; Pneumatic concrete placing machine operator (Hackley-Presswell or similar type);

Pumpcrete gun operator; Rock Drill or similar types; Rotary drill operator (excluding caisson type); Rubber-tired earth-moving equipment operator (single engine, caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. up to and including 50 cu.

yds. struck); Rubber-tired earth-moving equipment operator (multiple engine up to and including 25 yds. struck);

Rubber-tired scraper operator (self-loading paddle wheel type-John Deere, 1040 and similar single unit); Self-propelled curb and gutter machine operator; Shuttle buggy;

Skiploader operator (crawler and wheel type over 1-1/2 yds.

up to and including 6-1/2 yds.); Soil remediation plant operator; Surface heaters and planer operator; Tractor compressor drill combination operator; Tractor operator (any type larger than D-5 - 100 flywheel h.p. and over, or similar-bulldozer, tamper, scraper and push tractor single engine); Tractor operator (boom attachments), Traveling pipe wrapping, cleaning and bendng machine operator;

Trenching machine operator (over 6 ft. depth capacity, manufacturer's rating); trenching Machine with Road Miner attachment (over 6 ft depth capacity): Ultra high pressure waterjet cutting tool system mechanic; Water pull (compaction) operator

GROUP 9: Heavy Duty Repairman

GROUP 10: Drilling machine operator, Bucket or auger types (Calweld 200 B bucket or similar types-Watson 3000 or 5000 auger or similar types-Texoma 900 auger or similar types-drilling depth of 105' maximum); Dual drum mixer, dynamic compactor LDC350 (or similar types); Monorail locomotive operator (diesel, gas or electric); Motor patrol-blade operator (single engine); Multiple engine tractor operator (Euclid and similar type-except Quad 9 cat.); Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Pneumatic pipe ramming tool and similar types; Prestressed wrapping machine operator;

Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Rubber tired earth moving equipment operator (multiple engine, Euclid, caterpillar and similar over 25 yds. and up to 50 yds. struck), Tower crane repairman; Tractor loader operator (crawler and wheel type over 6-1/2 yds.); Woods mixer operator (and similar Pugmill equipment)

GROUP 11: Heavy Duty Repairman - Welder Combination, Welder - Certified.

GROUP 12: Auto grader operator; Automatic slip form operator;

Drilling machine operator, bucket or auger types (Calweld, auger 200 CA or similar types - Watson, auger 6000 or similar types - Hughes Super Duty, auger 200 or similar types - drilling depth of 175' maximum); Hoe ram or similar with compressor; Mass excavator operator less tha 750 cu.

yards; Mechanical finishing machine operator; Mobile form traveler operator; Motor patrol operator (multi-engine);

Pipe mobile machine operator; Rubber-tired earth- moving equipment operator (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck); Rubber-tired self- loading scraper operator (paddle-wheel-auger type self-loading - two (2) or more units)

GROUP 13: Rubber-tired earth-moving equipment operator operating equipment with push-pull system (single engine, up to and including 25 yds. struck)

GROUP 14: Canal liner operator; Canal trimmer operator;

Remote- control earth-moving equipment operator (operating a second piece of equipment: $1.00 per hour additional);

Wheel excavator operator (over 750 cu. yds.)

GROUP 15: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine-up to and including 25 yds. struck)

GROUP 16: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 17: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 50 cu. yds. struck);

Tandem tractor operator (operating crawler type tractors in tandem - Quad 9 and similar type)

GROUP 18: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -single engine, up to and including 25 yds. struck)

GROUP 19: Rotex concrete belt operator (or similar types);

Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds.and up to and including 50

cu. yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck)

GROUP 20: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)

GROUP 21: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck)

GROUP 22: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, up to and including 25 yds. struck)

GROUP 23: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating with the tandem push-pull system (multiple engine, up to and including 25 yds. struck)

GROUP 24: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds.

struck)

GROUP 25: Concrete pump operator-truck mounted; Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck)

CRANES, PILEDRIVING AND HOISTING EQUIPMENT CLASSIFICATIONS

GROUP 1: Engineer oiler; Fork lift operator (includes loed, lull or similar types)

GROUP 2: Truck crane oiler

GROUP 3: A-frame or winch truck operator; Ross carrier operator (jobsite)

GROUP 4: Bridge-type unloader and turntable operator;

Helicopter hoist operator

GROUP 5: Hydraulic boom truck; Stinger crane (Austin-Western or similar type); Tugger hoist operator (1 drum)

GROUP 6: Bridge crane operator; Cretor crane operator; Hoist operator (Chicago boom and similar type); Lift mobile operator; Lift slab machine operator (Vagtborg and similar types); Material hoist and/or manlift operator; Polar gantry crane operator; Self Climbing scaffold (or similar type); Shovel, backhoe, dragline, clamshell operator (over 3/4 yd. and up to 5 cu. yds. mrc); Tugger hoist operator

GROUP 7: Pedestal crane operator; Shovel, backhoe, dragline, clamshell operator (over 5 cu. yds. mrc); Tower crane repair; Tugger hoist operator (3 drum)

GROUP 8: Crane operator (up to and including 25 ton capacity); Crawler transporter operator; Derrick barge operator (up to and including 25 ton capacity); Hoist operator, stiff legs, Guy derrick or similar type (up to and including 25 ton capacity); Shovel, backhoe, dragline, clamshell operator (over 7 cu. yds., M.R.C.)

GROUP 9: Crane operator (over 25 tons and up to and including 50 tons mrc); Derrick barge operator (over 25 tons up to and including 50 tons mrc); Highline cableway operator;

Hoist operator, stiff legs, Guy derrick or similar type (over 25 tons up to and including 50 tons mrc); K-crane operator; Polar crane operator; Self erecting tower crane operator maximum lifting capacity ten tons

GROUP 10: Crane operator (over 50 tons and up to and including 100 tons mrc); Derrick barge operator (over 50 tons up to and including 100 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 50 tons up to and including 100 tons mrc), Mobile tower crane operator (over 50 tons, up to and including 100 tons M.R.C.); Tower crane operator and tower gantry

GROUP 11: Crane operator (over 100 tons and up to and including 200 tons mrc); Derrick barge operator (over 100 tons up to and including 200 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 100 tons up to and including 200 tons mrc); Mobile tower crane operator (over 100 tons up to and including 200 tons mrc)

GROUP 12: Crane operator (over 200 tons up to and including 300 tons mrc); Derrick barge operator (over 200 tons up to and including 300 tons mrc); Hoist operator, stiff legs, Guy derrick or similar type (over 200 tons, up to and including 300 tons mrc); Mobile tower crane operator (over 200 tons, up to and including 300 tons mrc)

GROUP 13: Crane operator (over 300 tons); Derrick barge operator (over 300 tons); Helicopter pilot; Hoist operator, stiff legs, Guy derrick or similar type (over 300 tons);

Mobile tower crane operator (over 300 tons)

TUNNEL CLASSIFICATIONS

GROUP 1: Skiploader (wheel type up to 3/4 yd. without attachment)

GROUP 2: Power-driven jumbo form setter operator

GROUP 3: Dinkey locomotive or motorperson (up to and including 10 tons)

GROUP 4: Bit sharpener; Equipment greaser (grease truck);

Slip form pump operator (power-driven hydraulic lifting device for concrete forms); Tugger hoist operator (1 drum);

Tunnel locomotive operator (over 10 and up to and including 30 tons)

GROUP 5: Backhoe operator (up to and including 3/4 yd.);

Small Ford, Case or similar; Drill doctor; Grouting machine operator; Heading shield operator; Heavy-duty repairperson;

Loader operator (Athey, Euclid, Sierra and similar types);

Mucking machine operator (1/4 yd., rubber-tired, rail or track type); Pneumatic concrete placing machine operator (Hackley-Presswell or similar type); Pneumatic heading shield (tunnel); Pumpcrete gun operator; Tractor compressor drill combination operator; Tugger hoist operator (2 drum);

Tunnel locomotive operator (over 30 tons)

GROUP 6: Heavy Duty Repairman

GROUP 7: Tunnel mole boring machine operator

ENGINEERS ZONES

$1.00 additional per hour for all of IMPERIAL County and the portions of KERN, RIVERSIDE & SAN BERNARDINO Counties as defined below:

That area within the following Boundary: Begin in San Bernardino County, approximately 3 miles NE of the intersection of I-15 and the California State line at that point which is the NW corner of Section 1, T17N,m R14E, San Bernardino Meridian. Continue W in a straight line to that point which is the SW corner of the northwest quarter of Section 6, T27S, R42E, Mt. Diablo Meridian. Continue North to the intersection with the Inyo County Boundary at that point which is the NE corner of the western half of the northern quarter of Section 6, T25S, R42E, MDM. Continue W along the Inyo and San Bernardino County boundary until the intersection with Kern County, as that point which is the SE corner of Section 34, T24S, R40E, MDM. Continue W along the Inyo and Kern County boundary until the intersection with Tulare County, at that point which is the SW corner of the SE quarter of Section 32, T24S, R37E, MDM. Continue W along the Kern and Tulare County boundary, until that point which is the NW corner of T25S, R32E, MDM. Continue S following R32E lines to the NW corner of T31S, R32E, MDM. Continue W to the NW corner of T31S, R31E, MDM. Continue S to the SW corner of T32S, R31E, MDM. Continue W to SW corner of SE quarter of Section 34, T32S, R30E, MDM.

Continue S to SW corner of T11N, R17W, SBM. Continue E along south boundary of T11N, SBM to SW corner of T11N, R7W, SBM.

Continue S to SW corner of T9N, R7W, SBM. Continue E along south boundary of T9N, SBM to SW corner of T9N, R1E, SBM.

Continue S along west boundary of R1E, SMB to Riverside County line at the SW corner of T1S, R1E, SBM. Continue E along south boundary of T1s, SBM (Riverside County Line) to SW corner of T1S, R10E, SBM. Continue S along west boundary of R10E, SBM to Imperial County line at the SW corner of T8S, R10E, SBM.

Continue W along Imperial and Riverside county line to NW corner of T9S, R9E, SBM. Continue S along the boundary between Imperial and San Diego Counties, along the west edge of R9E, SBM to the south boundary of Imperial County/California state line. Follow the California state line west to Arizona state line, then north to Nevada state line, then continuing NW back to start at the point which is the NW corner of Section 1, T17N, R14E, SBM

$1.00 additional per hour for portions of SAN LUIS OBISPO, KERN, SANTA BARBARA & VENTURA as defined below:

That area within the following Boundary: Begin approximately 5 miles north of the community of Cholame, on the Monterey County and San Luis Obispo County boundary at the NW corner of T25S, R16E, Mt. Diablo Meridian. Continue south along the west side of R16E to the SW corner of T30S, R16E, MDM. Continue E to SW corner of T30S, R17E, MDM. Continue S to SW corner of T31S, R17E, MDM. Continue E to SW corner of T31S, R18E, MDM.

Continue S along West side of R18E, MDM as it crosses into San Bernardino Meridian numbering area and becomes R30W. Follow the west side of R30W, SBM to the SW corner of T9N, R30W, SBM.

Continue E along the south edge of T9N, SBM to the Santa Barbara County and Ventura County boundary at that point whch is the SW corner of Section 34.T9N, R24W, SBM, continue S along the Ventura County line to that point which is the SW corner of the SE quarter of Section 32, T7N, R24W, SBM. Continue E along the south edge of T7N, SBM to the SE corner to T7N, R21W, SBM. Continue N along East side of R21W, SBM to Ventura County and Kern County boundary at the NE corner of T8N, R21W.

Continue W along the Ventura County and Kern County boundary to the SE corner of T9N, R21W. Continue North along the East edge of R21W, SBM to the NE corner of T12N, R21W, SBM. Continue West along the north edge of T12N, SBM to the SE corner of T32S, R21E, MDM. [T12N SBM is a think strip between T11N SBM and T32S MDM]. Continue North along the East side of R21E, MDM to the Kings County and Kern County border at the NE corner of T25S, R21E, MDM, continue West along the Kings County and Kern County Boundary until the intersection of San Luis Obispo County. Continue west along the Kings County and San Luis Obispo County boundary until the intersection with Monterey County. Continue West along the Monterey County and San Luis Obispo County boundary to the beginning point at the NW corner of T25S, R16E, MDM.

$2.00 additional per hour for INYO and MONO Counties and the

Northern portion of SAN BERNARDINO County as defined below:

That area within the following Boundary: Begin at the intersection of the northern boundary of Mono County and the California state line at the point which is the center of Section 17, T10N, R22E, Mt. Diablo Meridian. Continue S then SE along the entire western boundary of Mono County, until it reaches Inyo County at the point which is the NE corner of the Western half of the NW quarter of Section 2, T8S, R29E, MDM.

Continue SSE along the entire western boundary of Inyo County, until the intersection with Kern County at the point which is the SW corner of the SE 1/4 of Section 32, T24S, R37E, MDM.

Continue E along the Inyo and Kern County boundary until the intersection with San Bernardino County at that point which is the SE corner of section 34, T24S, R40E, MDM. Continue E along the Inyo and San Bernardino County boundary until the point which is the NE corner of the Western half of the NW quarter of Section 6, T25S, R42E, MDM. Continue S to that point which is the SW corner of the NW quarter of Section 6, T27S, R42E, MDM.

Continue E in a straight line to the California and Nevada state border at the point which is the NW corner of Section 1, T17N, R14E, San Bernardino Meridian. Then continue NW along the state line to the starting point, which is the center of Section 18, T10N, R22E, MDM.

REMAINING AREA NOT DEFINED ABOVE RECIEVES BASE RATE

ENGI0012-004 08/01/2012

Rates Fringes

OPERATOR: Power Equipment

(DREDGING)

(1) Leverman................$ 45.40 20.00

(2) Dredge dozer............$ 40.93 20.00

(3) Deckmate................$ 40.82 20.00

(4) Winch operator (stern winch on dredge)............$ 40.27 20.00

(5) Fireman-Oiler, Deckhand, Bargeman, Leveehand...................$ 39.73 20.00

(6) Barge Mate..............$ 40.34 20.00

IRON0377-002 01/01/2013

Rates Fringes

Ironworkers:

Fence Erector...............$ 26.58 16.74 Ornamental, Reinforcing and Structural..............$ 33.00 25.30

PREMIUM PAY:

$6.00 additional per hour at the following locations:

China Lake Naval Test Station, Chocolate Mountains Naval

Reserve-Niland, Edwards AFB, Fort Irwin Military Station, Fort Irwin Training Center-Goldstone, San Clemente Island, San Nicholas Island, Susanville Federal Prison, 29 Palms - Marine Corps, U.S. Marine Base - Barstow, U.S. Naval Air Facility - Sealey, Vandenberg AFB

$4.00 additional per hour at the following locations:

Army Defense Language Institute - Monterey, Fallon Air Base, Naval Post Graduate School - Monterey, Yermo Marine Corps Logistics Center

$2.00 additional per hour at the following locations:

Port Hueneme, Port Mugu, U.S. Coast Guard Station - Two Rock

LABO0089-001 07/01/2012

Rates Fringes

LABORER (BUILDING and all other Residential Construction) Group 1.....................$ 27.10 15.17 Group 2.....................$ 27.56 15.17 Group 3.....................$ 27.97 15.17 Group 4.....................$ 28.81 15.17 Group 5.....................$ 32.93 15.17

LABORER (RESIDENTIAL

CONSTRUCTION - See definition below)

(1) Laborer.................$ 23.48 14.13

(2) Cleanup, Landscaping, Fencing (chain link or wood).......................$ 22.19 14.13

RESIDENTIAL DEFINITION: Wood or metal frame construction of single family residences, apartments and condominums -excluding (a) projects that exceed three stories over a garage level, (b) any utility work such as telephone, gas, water, sewer and other utilities and (c) any fine grading work, utility work or paving work in the future street and public right-of-way; but including all rough grading work at the job site behind the existing right of way

LABORER CLASSIFICATIONS

GROUP 1: Cleaning and handling of panel forms; Concrete Screeding for Rought Strike-off; Concrete, water curing;

Demolition laborer; Flagman; Gas, oil and/or water pipeline laborer; General Laborer; General clean-up laborer;

Landscape laborer; Jetting laborer; Temporary water and air lines laborer; Material hoseman (walls, slabs, floors and decks); Plugging, filling of Shee-bolt holes; Dry packing of concrete; Railroad maintenance, Repair Trackman and road beds, Streetcar and railroad construction trac laborers; Slip form raisers; Slurry seal crews (mixer operator, applicator operator, squeegee man, Shuttle man, top man), filling of cracks by any method on any surface;

Tarman and mortar man; Tool crib or tool house laborer;

Window cleaner; Wire Mesh puling-all concrete pouring operations

GROUP 2: Asphalt Shoveler; Cement Dumper (on 1 yard or larger mixer and handling bulk cement); Cesspool digger and installer; Chucktender; Chute man, pouring concrete, the handling of the cute from ready mix trucks, such as walls, slabs, decks, floors, foundations, footings, curbs, gutters and sidewalks; Concrete curer-impervious membrane and form oiler; Cutting torch operator (demoliton); Guinea chaser;

Headboard man-asphlt; Laborer, packing rod steel and pans; membrane vapor barrier installer;

Power broom sweepers (small); Riiprap, stonepaver, placing stone or wet sacked concrete; Roto scraper and tiller; Tank sealer and cleaner; Tree climber, faller, chain saw operator, Pittsburgh Chipper and similar type brush shredders; Underground laborers, including caisson bellower

GROUP 3: Buggymobile; Concrete cutting torch; Concrete cutting torch; Concrete pile cutter; Driller, jackhammer, 2 1/2 feet drill steel or longer; Dri Pak-it machine; High sealer (including drilling of same); Hydro seeder and similar type; Impact wrench, mult-plate; Kettlemen, potmen and mean applying asphalt, lay-kold, creosote, line caustic and similar type materials (applying means applying, dipping, brushing or handling of such materials for pipe wrapping and waterproofing); Operators of pneumatic, gas, electric tools, vibratring machines, pavement breakers, air blasting, come-along, and similar mechanical tools not separately classified herein; Pipelayers back up man coating, grouting, making of joints, sealing, caulking, diapering and inclduing rubber gasket joints, pointing and any and all other services; Rotary Scarifier or multiple head concrete chipping scaarifier; Steel header board man and guideline setter; Tampers, Barko, Wacker and similar type; Trenching machine, handpropelled

GROUP 4: Asphalt raker, luterman, ironer, apshalt dumpman and asphalt spreader boxes (all types); Concrete core cutter (walls, floors or ceilings), Grinder or sander; Concrete saw man; cutting walls or flat work, scoring old or new concrete; Cribber, shorer, lagging, sheeting and trench bracing, hand-guided lagging hammer; Laser beam in connection with laborer's work; Oversize concrete vibrator operator 70 pounds and over; Pipelayer performing all services in the laying, installation and all forms of connection of pipe from the point of receiving pipe in the ditch until completion of oepration, including any and all forms of tubular material, whether pipe, metallic or non-metallic, conduit, and any other stationary type of tubular device used for the conveying of any substance or element, whether water, sewage, solid, gas, air or other product whatsoever and without regard to the nature of material from which the tubular material is fabricated; No joint pipe and stripping of same; Prefabricated manhole installer; Sandblaster (nozzleman), Porta shot-blast, water blasting

GROUP 5: Blasters Powderman-All work of loading holes, placing and blasting of all pwder and explosives of whatever type, regardless of method used for such loading and…