Attachment_2_-_Wage_Determination.txt

TXT text file 8 KB Posted

Attached to
NSWC-PC TIME CHARTER Federal contract opportunity
Solicitation number
N62387-15-R-2017
Issued by
Department of the Navy Military Sealift Command

Text of this file

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2012-0055 Diane C. Koplewski Division of | Revision No.: 5 Director Wage Determinations| Date Of Last Revision: 12/22/2014 Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Service Contract Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Nationwide: Applicble on the East, Gulf, West Coasts and Hawaii.

Licensed Marine Engineers see Wage Determination 2010-0116

Unlicensed Employees see Wage Determination 2010-0147

Masters, Mates and Pilots see Wage Determination 2010-014 **Fringe Benefits Required Follow the Occupational Listing**

Employed on contract for special projects vessels, tugboats and other coastal vessels.

OCCUPATION CODE - TITLE FOOTNOTE RATE

47080 - General Vessel Assistant 151.23 Daily (not set) - Captain, Harbor Tug 229.88 Daily (not set) - Deckhand, Harbor Tug 144.07 Daily (not set) - Engineer, Harbor Tug 192.53 Daily

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.02 per hour or $160.80 per week or $696.79 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

** OCCUPATIONS NOT INCLUDED IN THE SCA DIRECTORY OF OCCUPATIONS **

Captain, Harbor Tug

Qualified tug master and operator in charge of the tugboat, its personnel, its operation and maintenance. The Captain is a radio operator, understands and operates radar and other navigational aids used in conjunction with tug-ship operations and tug-barge operations bother harbor and ocean. This person must also be qualified in administrative ship business and overall charge of maintenance of the vessel. Must hold appropriate Coast Guard documentation/license.

Deckhand, Harbor Tug

Qualified seaman capable of performing all duties related to tugboat servicing ships and barges both in the harbor and at sea. Must hold appropriate Coast Guard documentation/license.

Engineer, Harbor Tug

Qualified engineer in the operation, the maintenance, both corrective and preventative, and overall supervisor in the proper operation and maintenance of all machinery, both main and auxiliary and electrical and other mechanical gear aboard the tugboat. Also must have administrative ability to keep records and maintain the inventory of parts, tools, fuel, etc. Must hold appropriate Coast Guard documentation/license.

Other files for this federal contract opportunity

Other files attached to NSWC-PC TIME CHARTER, newest first.
File Type Posted
Amend_6.doc DOC document
NSWC-PC_AMEND_5.doc DOC document
Attachment_7_-Amendment_0003_-_Vessel_Minimum_Requirements.xlsx XLSX spreadsheet
RFP-RFQ_Q_AND_A__4__NSWC-PC.pdf PDF
Attachment_7_-Amendment_0002_-_Vessel_Minimum_Requirements.xlsx XLSX spreadsheet
Amendment_0004.doc DOC document
Attachment_3_-_Amendment_0001_-_Basic_Pricing_Data.xlsx XLSX spreadsheet
RFP-RFQ_Q_AND_A__5__NSWC-PC_-_LA_22615.docx DOCX document
N62387-15-R-2017-0003.doc DOC document
pd256B7.doc DOC document
RFP-RFQ_Q_AND_A__3__NSWC-PC_21915.pdf PDF
RFP-RFQ_Q A__2_NSWC_PC_FINAL.pdf PDF
Attachment_7_-Amendment_0001_-_Vessel_Minimum_Requirements.xlsx XLSX spreadsheet
pd251D0.doc DOC document
RFP-RFQ_Q_AND_A_NSWC-PC_(1.0).pdf PDF
Attachment_7_-_Vessel_Minimum_Requirements.xlsx XLSX spreadsheet
Attachment_6_-_PP_Data_Sheet.doc DOC document
Attachment_4_-_SF_LLL.pdf PDF
N62387-15-R-2017.pdf PDF
Attachment_3_-_Basic_Pricing_Data.xlsx XLSX spreadsheet
Attachment_5_-_PP_Questionnaire.docx DOCX document
Attachment_1_-_List_of_GFP.pdf PDF
Show all 22

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

File details come from the government source that posted it. Updated .