Solicitation.pdf

CODE

(Hour)

PAGE(S)

until 04:00 PM local t ime 06 Sep 2019

X

A X B X C X D

EX

X

G F 86 - 96

97 - 107 H 108 - 112

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA FAR (48 CFR) 53.214(c)

DO-C9 1 112

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N61331 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 0 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

2 - 36

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

37 - 55

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

57 - 59

60 - 65 X K REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 66 - 71 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIO NS AND INSTRUCTIO NS

PART III - LIST O F DO CUMENTS, EXHIBITS AND O THER ATTACHMENTS

72 - 84

PART II - CO NTRACT CLAUSES

NSWC PANAMA CITY (L. HAWTHORNE)

LINDA.HAWTHORNE@NAVY.MIL

850-235-5386

110 VERNON AVE

PANAMA CITY FL 32407-7001

850-235-5386

FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.5. DATE ISSUED

09 Jul 2019

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N6133119R0017

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 45 Each Vest - MEDIUM

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

FOB: Other

PSC CD: 8470

MAX

NET AMT

UNIT UNIT PRICE MAX AMOUNT

0002 45 Each Vest - LARGE

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

UNIT UNIT PRICE MAX AMOUNT

0003 43 Each 15x15 Vest Shoot Pack

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

UNIT UNIT PRICE MAX AMOUNT

0004 1 Each Outer Shell Material 60"x6 YDS (Black)

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

UNIT UNIT PRICE MAX AMOUNT

0005 1 Each Outer Shell Material 60"x6 YDS (Tan)

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

UNIT UNIT PRICE MAX AMOUNT

0006 1 Each Inner Shell Material 60"x6 YDS (Black)

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

UNIT UNIT PRICE MAX AMOUNT

0007 1 Each Inner Shell Material 60"x6 YDS (Tan)

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

UNIT UNIT PRICE MAX AMOUNT

0008 1 Each Mesh Liner Material 60"x6 YDS (Black)

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

UNIT UNIT PRICE MAX AMOUNT

0009 1 Each Mesh Liner Material 60"x6 YDS (Tan)

FFP

BASE PERIOD - The Contractor shall provide First Article items to be tested by the Government in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1.

UNIT UNIT PRICE MAX AMOUNT

1001 3,500 Each OPTION Vest - MEDIUM

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1002 2,000 Each OPTION Vest - LARGE

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1003 350 Each OPTION Buoyancy Compensator Panel Set - MEDIUM

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1004 200 Each OPTION Buoyancy Compensator Panel Set - LARGE

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1005 350 Each OPTION Outer Shell - MEDIUM (Black)

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1006 200 Each OPTION Outer Shell - LARGE (Black)

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1007 350 Each OPTION Outer Shell - MEDIUM (Tan)

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1008 200 Each OPTION Outer Shell - LARGE (Tan)

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1009 350 Each OPTION Name Tape Set - MEDIUM (Black)

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1010 200 Each OPTION Name Tape Set - LARGE (Black)

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1011 350 Each OPTION Name Tape Set - MEDIUM (Tan)

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

1012 200 Each OPTION Name Tape Set - LARGE (Tan)

FFP

OPTION 1 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2001 3,500 Each OPTION Vest - MEDIUM

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2002 2,000 Each OPTION Vest - LARGE

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2003 700 Each OPTION Buoyancy Compensator Panel Set - MEDIUM

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2004 400 Each OPTION Buoyancy Compensator Panel Set - LARGE

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2005 700 Each OPTION Outer Shell - MEDIUM (Black)

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2006 400 Each OPTION Outer Shell - LARGE (Black)

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2007 350 Each OPTION Outer Shell - MEDIUM (Tan)

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2008 200 Each OPTION Outer Shell - LARGE (Tan)

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2009 700 Each OPTION Name Tape Set - MEDIUM (Black)

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2010 400 Each OPTION Name Tape Set - LARGE (Black)

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2011 350 Each OPTION Name Tape Set - MEDIUM (Tan)

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

2012 200 Each OPTION Name Tape Set - LARGE (Tan)

FFP

OPTION 2 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3001 3,500 Each OPTION Vest - MEDIUM

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3002 2,000 Each OPTION Vest - LARGE

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3003 1,050 Each OPTION Buoyancy Compensator Panel Set - MEDIUM

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3004 600 Each OPTION Buoyancy Compensator Panel Set - LARGE

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3005 1,050 Each OPTION Outer Shell - MEDIUM (Black)

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3006 600 Each OPTION Outer Shell - LARGE (Black)

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3007 350 Each OPTION Outer Shell - MEDIUM (Tan)

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3008 200 Each OPTION Outer Shell - LARGE (Tan)

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3009 1,050 Each OPTION Name Tape Set - MEDIUM (Black)

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3010 600 Each OPTION Name Tape Set - LARGE (Black)

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3011 350 Each OPTION Name Tape Set - MEDIUM (Tan)

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

3012 200 Each OPTION Name Tape Set - LARGE (Tan)

FFP

OPTION 3 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4001 3,500 Each OPTION Vest - MEDIUM

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4002 2,000 Each OPTION Vest - LARGE

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4003 1,050 Each OPTION Buoyancy Compensator Panel Set - MEDIUM

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4004 600 Each OPTION Buoyancy Compensator Panel Set - LARGE

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4005 1,050 Each OPTION Outer Shell - MEDIUM (Black)

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4006 600 Each OPTION Outer Shell - LARGE (Black)

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4007 350 Each OPTION Outer Shell - MEDIUM (Tan)

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4008 200 Each OPTION Outer Shell - LARGE (Tan)

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4009 1,050 Each OPTION Name Tape Set - MEDIUM (Black)

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4010 600 Each OPTION Name Tape Set - LARGE (Black)

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4011 350 Each OPTION Name Tape Set - MEDIUM (Tan)

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

4012 200 Each OPTION Name Tape Set - LARGE (Tan)

FFP

OPTION 4 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5001 3,500 Each OPTION Vest - MEDIUM

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5002 2,000 Each OPTION Vest - LARGE

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5003 1,050 Each OPTION Buoyancy Compensator Panel Set - MEDIUM

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5004 600 Each OPTION Buoyancy Compensator Panel Set - LARGE

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5005 1,050 Each OPTION Outer Shell - MEDIUM (Black)

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5006 600 Each OPTION Outer Shell - LARGE (Black)

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5007 350 Each OPTION Outer Shell - MEDIUM (Tan)

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5008 200 Each OPTION Outer Shell - LARGE (Tan)

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5009 1,050 Each OPTION Name Tape Set - MEDIUM (Black)

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5010 600 Each OPTION Name Tape Set - LARGE (Black)

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5011 350 Each OPTION Name Tape Set - MEDIUM (Tan)

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

UNIT UNIT PRICE MAX AMOUNT

5012 200 Each OPTION Name Tape Set - LARGE (Tan)

FFP

OPTION 5 - The Contractor shall provide the MAS in accordance with (IAW) the Statement of Work (SOW), and Section J, Attachment J-1, and additional contract terms and conditions specified herein.

TOTAL CLIN AMOUNT

TOTAL FIRM FIXED PRICE AMOUNT FOR ALL CLINS $

MINIMUM AND MAXIMUM QUANTITIES

As referred to in paragraph (b) of the “Indefinite Quantity” clause of this contract, the contract minimum quantity is a total of $10,000.00 worth of orders. The contract maximum amount is the total “estimated amount” stated in the schedule for each particular contract period.

Section C - Descriptions and Specifications

CLAUSES INCORPORATED BY FULL TEXT

C-202-H001 ADDITIONAL DEFINITIONS–BASIC (NAVSEA) (OCT 2018)

(a) Department - means the Department of the Navy.

(b) Commander, Naval Sea Systems Command - means the Commander of the Naval Sea Systems Command of the Department of the Navy or his duly appointed successor.

(c) References to The Federal Acquisition Regulation (FAR) - All references to the FAR in this contract shall be deemed to also reference the appropriate sections of the Defense FAR Supplement (DFARS), unless clearly indicated otherwise.

(d) National Stock Numbers - Whenever the term Federal Item Identification Number and its acronym FIIN or the term Federal Stock Number and its acronym FSN appear in the contract, order or their cited specifications and standards, the terms and acronyms shall be interpreted as National Item Identification Number (NIIN) and National Stock Number (NSN) respectively which shall be defined as follows:

(1) National Item Identification Number (NIIN). The number assigned to each approved Item Identification under the Federal Cataloging Program. It consists of nine numeric characters, the first two of which are the National Codification Bureau (NCB) Code. The remaining positions consist of a seven digit non-significant number.

(2) National Stock Number (NSN). The National Stock Number (NSN) for an item of supply consists of the applicable four-position Federal Supply Class (FSC) plus the applicable nine-position NIIN assigned to the item of supply.

(End of text)

C-204-H001 USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT FILES (NAVSEA)

(OCT 2018)

(a) NAVSEA may use a file room management support contractor, hereinafter referred to as "the support contractor", to manage its file room, in which all official contract files, including the official file supporting this procurement, are retained. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as “protected information”. File room management services consist of any of the following: secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.

(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file room management services are acquired will contain a requirement that:

(1) The support contractor not disclose any information;

(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;

(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,

(4) In addition to any other rights the contractor may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed protected information, for the unauthorized duplication, release, or disclosure of such protected information.

(c) Execution of this contract by the contractor is considered consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file room management support contractor for the limited purpose of executing its file room support contract responsibilities.

(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Contractors should enter into separate non-disclosure agreements with the file room contractor. Contact the Procuring Contracting Officer for contractor specifics. However, any such agreement will not be considered a prerequisite before information submitted is stored in the file room or otherwise encumber the government.

C-211-H016 SPECIFICATIONS AND STANDARDS (NAVSEA) (OCT 2018)

(a) Definitions.

(i) A "zero-tier reference" is a specification, standard, or drawing that is cited in the contract (including its attachments).

(ii) A "first-tier reference" is either: (1) a specification, standard, or drawing cited in a zero-tier reference, or (2) a specification cited in a first-tier drawing.

(b) Requirements. All zero-tier and first-tier references, as defined above, are mandatory for use. All lower tier references shall be used for guidance only unless specifically identified below.

None

C-211-H017 UPDATING SPECIFICATIONS AND STANDARDS (NAVSEA) (DEC 2018)

The contractor may request that this contract be updated to include the current version of the applicable specification or standard if the update does not affect the form, fit or function of any deliverable item or increase the cost/price of the item to the Government. The contractor should submit update requests to the Procuring Contracting Officer with copies to the Administrative Contracting Officer and cognizant program office representative for approval. The contractor shall perform the contract in accordance with the existing specifications and standards until notified of approval/disapproval of its request to update by the Procuring Contracting Officer. Any approved alternate specifications or standards will be incorporated into the contract.

C-211-H018 APPROVAL BY THE GOVERNMENT (NAVSEA) (JAN 2019)

Approval by the Government as required under this contract and applicable specifications shall not relieve the Contractor of its obligation to comply with the specifications and with all other requirements of the contract, nor shall it impose upon the Government any liability it would not have had in the absence of such approval.

C-215-H002 CONTRACTOR PROPOSAL (NAVSEA) (OCT 2018)

(a) Performance of this contract by the Contractor shall be conducted and performed in accordance with the detailed obligations to which the Contractor committed itself in Proposal N6133119R0017 dated TBD in response to Solicitation No. N6133119R0017.

(b) The technical volume(s) of the Contractor's proposal is(are) hereby incorporated by reference and made subject to the "Order of Precedence" (FAR 52.215-8) clause of this contract. Under the "Order of Precedence" clause, the technical volume(s) of the Contractor's proposal referenced herein is (are) hereby designated as item (f) of the clause, following "the specifications" in the order of precedence.

C-223-W001 ACCIDENT REPORTING (NAVSEA) (OCT 2018)

(a) In accordance with DFARS 252.223-7002 (d), the Contractor shall immediately notify the Administrative Contracting Officer (ACO) and Procuring Contracting Officer (PCO) following an accident or incident. Also, the Contractor shall provide a written report within (insert number of days) days of the accident or incident containing, at a minimum, the following:

(1) Location, date and local time of the occurrence;

(2) Category of accident (fire, explosion, natural disaster, etc.);

(3) Identification of equipment, material and type of activity involved;

(4) Contract number;

(5) Procuring activity (name of PCO and ACO);

(6) Narrative of occurrence, including cause(s), if known;

(7) Personnel involved and degree of injury, if any. Specify whether Contractor and/or Government personnel;

(8) Assessment of damage. Estimate in dollars for contractor and/or government owned material, property, equipment;

(9) Was a news release made? If so, by whom? If not, will a news release be made?

(10) Was a request made for any assistance?

(11) Will there be any effect on production? If so, explain in detail.

(12) Corrective action taken, if any.

(13) Name and title of person submitting this report.

(b) The Contractor shall forward weekly written reports to the ACO and PCO until the accident or incident no longer affects production or when contract deliveries are on schedule.

C-227-H006 DATA REQUIREMENTS (NAVSEA) (OCT 2018)

The data to be furnished hereunder shall be prepared in accordance with the Contract Data Requirements List, DD Form 1423, Exhibit(s) A, attached hereto.

(End of Text)

C-227-H008 GOVERNMENT-INDUSTRY DATA EXCHANGE PROGRAM (NAVSEA) (DEC 2018)

(a) The contractor shall actively participate in the Government Industry Data Exchange Program in accordance with the GIDEP Operations Manual, S0300-BT-PRO-010. The contractor shall submit information concerning critical or major nonconformances, as defined in FAR 46.407/DFARS 246.407, to the GIDEP information system.

(b) The contractor shall insert paragraph (a) of this clause in any subcontract when deemed necessary. When so inserted, the word "contractor" shall be changed to "subcontractor."

(c) The contractor shall, when it elects not to insert paragraph (a) in a subcontract, provide the subcontractor any GIDEP data which may be pertinent to items of its manufacture and verify that the subcontractor utilizes any such data.

(d) The contractor shall, whether it elects to insert paragraph (a) in a subcontract or not, verify that the subcontractor utilizes and provides feedback on any GIDEP data that may be pertinent to items of its manufacture."

(e) GIDEP materials, software and information are available without charge from:

GIDEP Operations Center P.O. Box 8000 Corona, CA 92878-8000 Phone: (951) 898-3207

FAX: (951) 898-3250

Internet: http://www.gidep.org

C-242-H001 EXPEDITING CONTRACT CLOSEOUT (NAVSEA) (OCT 2018)

http://www.gidep.org/

(a) As part of the negotiated fixed price or total estimated amount of this contract, both the Government and the Contractor have agreed to waive any entitlement that otherwise might accrue to either party in any residual dollar amount of $1,000 or less at the time of final contract closeout. The term "residual dollar amount" shall include all money that would otherwise be owed to either party at the end of the contract, except that, amounts connected in any way with taxation, allegations of fraud and/or antitrust violations shall be excluded. For purposes of determining residual dollar amounts, offsets of money owed by one party against money that would otherwise be paid by that party may be considered to the extent permitted by law.

(b) This agreement to waive entitlement to residual dollar amounts has been considered by both parties. It is agreed that the administrative costs for either party associated with collecting such small dollar amounts could exceed the amount to be recovered.

C-245-H005 INFORMATION AND DATA FURNISHED BY THE GOVERNMENT--ALTERNATE I

(NAVSEA) (MAY 2019)

(a) Contract Specifications, Drawings and Data. The Government will furnish, if not included as an attachment to the contract, any unique contract specifications or other design or alteration data cited or referenced in Section C.

(b) Government Furnished Information (GFI). GFI is defined as that information essential for the installation, test, operation, and interface support of all Government Furnished Material identified in an attachment in Section J. The Government shall furnish only the GFI identified in an attachment in Section J. The GFI furnished to the contractor need not be in any particular format. Further, the Government reserves the right to revise the listing of GFI as follows:

(1) The Contracting Officer may at any time by written order:

(i) delete, supersede, or revise, in whole or in part, data identified in an attachment in Section J; or

(ii) add items of data or information to the attachment identified in Section J; or

(iii) establish or revise due dates for items of data or information in the attachment identified in Section J.

(2) If any action taken by the Contracting Officer pursuant to subparagraph (1) immediately above causes an increase or decrease in the costs of, or the time required for, performance of any part of the work under this contract, the contractor may be entitled to an equitable adjustment in the contract amount and delivery schedule in accordance with the procedures provided for in the "CHANGES" clause of this contract.

(c) Except for the Government information and data specified by paragraphs (a) and (b) above, the Government will not be obligated to furnish the Contractor any specification, standard, drawing, technical documentation, or other publication, notwithstanding anything to the contrary in the contract specifications, the GFI identified in an attachment in Section J, the clause of this contract entitled "Government Property" (FAR 52.245-1) or "Government Property Installation Operation Services" (FAR 52.245-2), as applicable, or any other term or condition of this contract. Such referenced documentation may be obtained:

(1) From the ASSIST database via the internet at https://assist.dla.mil/online/start/; or

(2) By submitting a request to the

Department of Defense Single Stock Point (DoDSSP)

Building 4, Section D

700 Robbins Avenue Philadelphia, Pennsylvania 19111-5094 Telephone (215) 697-6396 Facsimile (215) 697-9398.

Commercial specifications and standards, which may be referenced in the contract specification or any sub-tier specification or standard, are not available from Government sources and should be obtained from the publishers.

C-246-H002 GOVERNMENT USE OF CONTRACTOR’S INSPECTION EQUIPMENT (NAVSEA) (OCT 2018)

The contractor's gages, measuring, and testing devices shall be made available to the Government when required to determine contractor conformance with contract requirements. If conditions warrant, the contractor’s personnel shall be made available for operation of such devices and for verification of their accuracy and condition.

STATEMENT OF WORK

STATEMENT OF WORK

FOR

MARITIME ARMOR SYSTEM (MAS)

1.0 SCOPE

NAVSEA has a requirement to outfit U.S. Naval personnel with the Maritime Armor System (MAS). This Statement of Work (SOW) defines the efforts required for the production and delivery of the MAS, to outfit U.S.

Naval personnel aboard Navy ships, and at Naval Activities, US Navy Military Sealift Command and other DoD activities. The MAS is a critical safety item. The MAS body armor is a modular unisex body armor system providing multiple levels of ballistic protection depending on the system configuration. Qualification and eligibility for any production task orders under this contract is contingent upon the contractor’s successful completion of First Article Test (FAT) in accordance with NQ/PD 16-03 Maritime Armor System Purchase Description, Attachment J- 1.

1.1 Acronyms

CAR Corrective Actions Report CI Configuration Item CM Configuration Management CoC Certificate of Conformance COTS Commercial Off-The-Shelf CSA Configuration Status Accounting DAC Days After Contract Award

DAEO Days After Exercising Option DCMA Defense Contract Management Agency DoD Department of Defense ECP Engineering Change Proposal EPA Environmental Protection Agency ESOH Environment, Safety, and Occupational Health FAT First Article Testing HHA Health Hazard Assessment HMMP Hazardous Materials Management Program IPR In-Process Review LAT Lot Acceptance Testing MAS Maritime Armor System MSDS Material Safety Data Sheet NCTRF Navy Clothing and Textile Research Facility NDI Non-Developmental Item NEPA National Environmental Policy Act NOR Notice of Revision ODC Ozone Depleting Chemical ODS Ozone Depleting Substance PCA Physical Configuration Audit PCO Procuring Contracting Officer PD Product Description PMO Program Management Office QA Quality Assurance QALI Quality Assurance Letter of Instruction QAR Quality Assurance Representative QASP Quality Assurance Surveillance Plan RFV Request for Variance SOW Statement of Work

2.0 APPLICABLE DOCUMENTS

The following documents, of the exact issue shown, form a part of this statement of work (SOW) to the extent specified herein. In the event of conflict between the documents referenced and the contents of this SOW, the SOW shall supersede. Second tier and lower references, (i.e., those referenced in the primary references) shall be used for guidance only.

2.1 Military Standards

a) FED-STD-313F Material Safety data, Transportation data, and 12 Oct 2018 Disposal Data for Hazardous Materials Furnish to

Government Activities

b) MIL-STD-129R, Change 1 Military Marking for Shipment and Storage 24 May 2018

c) MIL-STD-882E System Safety

11 May 2012

2.2 Military Specifications

None

2.3 Other Documents

a) ANSI/ASQ Z1.4-2003 (R2018) Sampling Procedures and Tables for Inspection by Attributes

b) ASME Y14.34 Associated Lists 01 Aug 2008

c) ASME Y14.100 Engineering Drawing and Related Documentation

30 Jan 1998 Practices

d) EIA-649-B Configuration Management Standard 04 Mar 2015

e) MIL-HDBK-61A Configuration Management Guidance 07 Feb 2001

f) NAS 411 Materials Hazardous Management Program 11 Mar 1994

g) NQ/PD 16-03 Product Description, Body Armor, Maritime Armor 01 Nov 18 System (MAS) (Attachment J-1), 75 pages,

h) MAS Quality Assurance Letter of Instruction, 4 pages (Attachment J-2)

3.0 REQUIREMENTS

3.1 Fabrication Support

3.1.1 Maritime Armor System (MAS)

The Contractor shall provide all facilities, materials and labor to fabricate and deliver the MAS.

The MAS shall be manufactured in two (2) sizes: Medium (M) and Large (L). The Contractor shall provide and deliver MASs in accordance with the form, fit, and functional requirements as described in this Statement of Work and Purchase Description NQ/PD 16-03 (Attachment J-1). Specific quantities of each item are specified in Section B of this contract.

3.1.2 Commercial Products/Standard Parts

The Contractor shall use commercial products, processes, and practices when possible to reduce production and operation support costs unless a material or part is specified in NQ/PD 16-03. In any case where not specified in the PD, and it is technically and economically feasible, a standard part will be used rather than a non-standard part. A standard part is one that is routinely available in the Government inventory, or commercial supply channels and is not sole source or proprietary in nature. Any non-standard part shall be identified to the Government for written approval to use that part.

3.1.3 Product Improvements

Future improvements in system design which provide improved fit, durability and impact performance or reduce cost are encouraged during the contract term through the use of Engineering Change Proposals (ECP), Manufacturing Technology, and Operation Support Cost Reduction. Product improvements may be proposed by either the Contractor or the Government to eliminate operational shortcomings, improve operational effectiveness, accommodate fielding requirements, or provide savings to the Government. Product improvements will not be considered prior to contract award.

3.2 Test and Evaluation

3.2.1 First Article Test (FAT)/Performance Based Qualifications

3.2.1.1 The Government will conduct First Article Tests in accordance with FAR 52.209-4 First Article Approval- Government Testing. The Government will evaluate the First Articles in accordance with Attachment J-1 NQ/PD 16-03.

3.2.1.2 The Contractor shall deliver production MAS systems for non-ballistic and ballistic requirements and verifications within 60 days of contract award in accordance with Attachment J-1 NQ/PD 16-03. Delivery address is provided in Section F of this contract. The contractor shall provide all certification/compliance documentation with the MAS systems.

3.2.1.3 Of the 90 first article MAS units, three of each size will be used for end item inspection, three of each size will be used for buoyancy verification, three of each size will be used for webbing and hardware testing and the remainder will be used for ballistic qualification. The Government will pay for conducting the FAT and test articles that receive a notice of approval, or a notice of conditional approval. Should articles fail the initial FAT and receive a notice of disapproval, the Contractor shall pay for subsequent FAT test articles and the conduct of FAT prior to receiving any task orders.

3.2.1.4 The Government’s FAT may include verification of any or all of the requirements specified in Attachment J-1 NQ/PD 16-03.

3.2.1.5 Any additional FAT required to validate revised or new designs shall be approved by the Procuring Contracting Officer (PCO).

3.2.1.6 The Contractor shall produce both the first article units and the production units at the same facility. Any facility changes must be approved by the Government.

3.3 Configuration Management

3.3.1 Raw Materials

All production quantities submitted after approval of the FAT shall be produced using the same raw materials, suppliers, materials, processes, procedures, equipment and facilities that resulted in the manufacture of the acceptable FAT items. This includes all raw materials or sub-components. Prior to any change, and within 30 days of the known change, in the production of the approved FAT test items, including a raw material supplier, production processes, and production locations, the contractor shall notify the Contracting Officer in writing. The Contracting Officer will determine if a new FAT is required prior to that change.

3.3.2 Standard Samples

Upon approval of FAT, the three MASs systems from each size for which end item inspection is completed (100% inspection for dimensional and quality defects) will have any and all defects corrected by the contractor. After correction by the contractor, the MASs will be signed as standard samples and will be retained by the NAVSEA, DCMA, and Navy Clothing and Textile Research Facility (NCTRF) to be used as a guide for all future quality inspections. These items are to be fabricated where the items are going to be produced in production and all future lots. If prime contractor uses multiple subcontractors for production of the end item, each subcontractor shall submit a set of standard samples as well.

3.3.3 Configuration Process and Control (CDRL A001)

The Contractor shall maintain a configuration management (CM) process for the control of raw material utilized in the ballistic filler designs and buoyancy compensation panel foam that are approved by the Government in accordance with FAT requirements. The Contractor shall furnish with each lot submitted to the Government, the associated ballistic filler and buoyancy compensation panel foam raw material traceability matrix, to include raw material supplier Certificates of Conformance (CoC) and lots of raw material used in each lot presented to the Government. MIL-HDBK-61A may be used for guidance. The Contractor’s CM process shall consist of configuration identification and configuration control of all raw materials utilized in the production of ballistic filler and buoyancy compensation panel foam. The CM process shall interface with other acquisition requirements such as design review, quality assurance, and other program related disciplines shall be addressed.

3.4 Lot Acceptance Test and Evaluation

3.4.1 Procedures

The Contractor shall provide measurements and Certificates of Conformance for all in-process material inspections needed to meet the minimum requirements of the performance specification. End item testing shall be conducted on all lots presented to the Government in accordance with Attachment J-1 NQ/PD 16-03. Only the ballistic system and buoyancy compensation foam that has successfully completed FAT per Attachment J-1 NQ/PD 16-03 shall be used. The Contractor shall assign lot and serial numbers to each ballistic component and buoyancy compensation panel produced and shall be able to track those serial numbers back to Lot Acceptance Testing and raw materials. Defense Contract Management Agency (DCMA) Quality Assurance Representative (QAR) and/or Technical Warrant Holder shall identify randomly selected serial number components to be pulled from production for purposes of Lot testing.

3.4.1.1 The Quality Assurance Letter of Instruction (QALI) (Attachment J-2) is intended to be implemented by the Defense Contract Management Agency (DCMA) at the contractors manufacturing facility. This document stipulates the requirements and expectations of the Program Management Office (PMO) for production process monitoring, in-process material inspection, sampling procedures and finished end item evaluations. DCMA will develop and submit a Quality Assurance Surveillance Plan (QASP) to be coordinated with the PMO.

3.4.1.2 For components that are found to be non-acceptable, the contractor shall conduct

100% inspection of that component. Based on the severity of the non-conformity and direction by the government, those components will either be removed from the finished lot and replaced, or nonconformities corrected, prior to re-inspection by the QAR, at the contractor’s expense.

3.4.2 Examination of Ballistic Fillers (CDRL A001)

The Contractor shall conduct 100 percent in-process visual examination of ballistic filler assemblies in accordance with Attachment J-1, paragraph 4.5.1, and Table II-B, #7. Furthermore, the Contractor’s

Configuration Management process shall maintain all CoCs stipulated in Attachment J-1, Appendix B, Table I-B associated to each lot submitted to the Government. CoCs shall be provided to the Government upon request.

3.4.3 Testing Submissions

Lot size inspection shall be in accordance with Attachment J-1 NQ/PD 16-03, Appendix F and derived per OSD protocol and ANSI/ASQ Z1.4-2008 - Sampling Procedures and Tables for Inspection by Attributes.

3.4.4 Designated Authority

The Designated Authority (below) shall be placed in box 17 of all DD Form 1222 (Request for and Results of Tests), and the test lab shall provide the results of all testing directly to the designated authority. No lots shall be released from the Contractor’s facility prior to release of end item testing notification of acceptance from the Government (DCMA, contracting agency, or designated authority). The Designated Authority for this contract is provided in Section G.

3.4.5 Additional Testing

While the scope of QA testing is limited in requirements, threat, and conditions tested, it does not relieve the Contractor from full requirements of this contract and all associated specifications or the statement of work. Nor shall it permit the Contractor to present to the Government any items that are known or suspected to be substandard merely on the basis of acceptable lot test results or the possibility of acceptable results if tested. The Government reserves the right to conduct varied or additional QA and/or verification tests against any or all requirements of the contract and/or its specifications at any time as a condition of acceptance.

3.5 Program Management

The Contractor shall designate a Program Manager. This individual shall serve as the primary point of contact between the Government and the Contractor, and shall be responsible for the coordination of all Contractor activities related to the contract.

3.6 Post Award Conference

A Post Award Conference will be held by the Government at the Contractor’s facility within 30 days of contract award. The purpose of the conference is to ensure mutual understanding of contract requirements, dispute resolution procedures, and identification of points of contact from contractor and…