7338V510-00079-7338-V510_R2_A008_DI-MISC-81321A_H-Lited_DID_09DEC2017.pdf

DATA ITEM DESCRIPTION

Title: Equipment Installation Instructions

Number: DI-MISC-81321A Approval Date: 20130419

AMSC Number: N9364 Limitation: N/A

DTIC Applicable: N/A GIDEP Applicable: N/A

Office of Primary Responsibility: AS/PMA-207

Applicable Forms: N/A

Use/Relationship:

This Document provides equipment installation, operation, and maintenance instructions.

This Data Item Description (DID) contains the format, content, and intended use information, and content preparation instructions for the data product resulting from the work task described in the contract Statement of

Work or Performance Work Statement.

This DID supersedes DI-MISC-81321.

Requirements:

1. Format: The data shall be in Contractor format or if a commercial commodity as designated per FAA regulations.

2. Content: The Equipment Installation Instructions shall have a title page containing the title, date, application, and document number.

Section 1. Installation Instructions. The equipment installation instructions include step-by-step assembly, mounting and connection procedures, and grounding and bonding procedures and procedures to demonstrate that the equipment is operating correctly. The instructions shall include the information necessary for personnel to properly engineer the installation of the system. The instruction shall include dimensions of the equipment, mounting brackets, consoles/panels, wiring and pictures to assist in the location of wiring runs. The instructions are in sufficient detail to enable a technician with little or no formal training on the equipment to perform installation functions.

Section 2. Operations Instructions. The operations instructions contain the complete, step-by-step description

Source: https://assist.dla.mil -- Downloaded: 2017-12-09T20:06Z Check the source to verify that this is the current version before use.

john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle

DI-MISC-81321A

of all operating procedures. The instructions are in sufficient detail to enable a technician with little or no formal training on the equipment to perform operational functions.

Section 3. Maintenance Instructions. The maintenance instructions contain the complete, step-by-step description of the following for each subsystem and assembly:

a. All maintenance procedures and adjustments performed during installation.

b. All maintenance procedures and actions required to diagnose and locate any fault of any part of the system during and after installation.

c. All test equipment required to inspect, test, calibrate, service, repair, overhaul and end items shall be identified. This information shall include the identification of test cables, connectors, extender kits, and adapters required.

3. The instructions are in sufficient detail to enable a technician with little or no formal training on the equipment to perform maintenance functions.

4. END OF DI-MISC-81321A.

Source: https://assist.dla.mil -- Downloaded: 2017-12-09T20:06Z Check the source to verify that this is the current version before use.

john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle