7338V510-00079-7338-V510_R2_A002_A003_DI-SAFT-81933_H-Lited_DID_08DEC2017.pdf
Data Item Description Dec 8, 2017 PDF 77 KB Posted
- Attached to
- CASK RENTAL AND TRANSPORT SERVICE
- Solicitation number
- N4523A18Q4087
About this file
CDRL A002-A003 DID
View the file
Who attaches DI-SAFT-81933
| Agency | Files |
|---|---|
| Department of the Navy Naval Sea Systems Command | 1 |
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: Critical Safety Item Inspection and Material Certification Report
Number: DI-SAFT-81933 Approval Date: 20130827
AMSC Number: N9148 Limitation: N/A
DTIC Applicable: N/A GIDEP Applicable: N/A
Office of Primary Responsibility: AS/AIR 4.8.8.8
Applicable Forms: N/A
Use/relationship: The Critical Safety Item Inspection and Material Certification Report provides a complete document set of Objective Quality Evidence (OQE) of inspection and certification. These sheets are required for all Critical Safety Items.
This DID contains the format, content, and intended use information for the data product resulting from the work task described in the contract SOW.
Requirements:
1. Format. Contractor’s format acceptable.
2. Content.
2.1. Title Page, containing the following:
a. Title/identification of the system/component/program/project.
b. Title of CDRL and CDRL number
c. Contract number.
d. Preparing activity or contractor’s title.
e. Security classification, when required.
f. Distribution Statement.
2.2. Table of Contents
2.3. The body of the report shall contain the following:
a. Completed Inspection Method Sheets
b. Completed Process/Operations Sheets (when needed by the contractor to document necessary OQE)
c. The recorded results (actual readings and/or measurements) of Quality Conformance and Lot Sampling Inspection for all associated attributes and characteristics that are present in the requirement/drawings and specifications.
d. OQE of Government witness of GSI hold points.
e. Flight Safe certification number/MIC number (when MIC marking is required on the part(s))
f. May include any other additional OQE (as required to demonstrate that the part(s) conform to the requirements/specifications)
3. End of DI-SAFT-81933.
Source: https://assist.dla.mil -- Downloaded: 2017-12-08T21:39Z Check the source to verify that this is the current version before use.
john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle john.eskander Rectangle
File details come from the government source that posted it.