1_-_E-Paint_EP-1000_Primer_MSDS_Part_A.pdf

EP-PRIME 1000 Part A Product Name:

N/AEPA Registration #:

Ingredient Name: Weight % Occupational Exposure

TLV PEL

Vap. Press mm Hg

This product contains isocyanate based on toluene diisocynate (TDI). Free TDI may be released at elevated temperatures during baking. TDI is highly toxic by inhalation. TDI is a severe eye, skin and mucous membrane irritant. TDI is a pulmonary and skin sensitizer. TDI is a possible human carcinogen by IARC and as a reasonably anticipated carcinogen by NTP. The OSHA and acgih exposure limit is 0.005 ppm(twa) and 0.02 ppm (stel). Contains a chemical that is toxic by ingestion, dermal absorption and inhalation. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

6/10/2008Issue date:Material Safety Data Sheet

E Paint Company 25 Research Road Falmouth, MA 02536

Manufacturer:

For more information call:

Ph: (800) 258-5998 Fax: (508) 495-3210

In case of emergency call:

CHEM TREC (800) 424-9300

Xylene 1.0-5.0% 100ppm 100ppm1330-20-7

CAS #

1. Product Identification

2. Hazardous Ingredients

REACTIVITY

PERS. PROTEC. EQUIP.

HEALTH

FLAMMABILITY

REACTIVITY

Mesitylene

Mica

Methyl amyl ketone

108-67-8

110-43-0

12001-26-2 10.0-20.0%

2.0-7.0%

2.0-7.0% 25ppm

50ppm

3mg/m3

NE

3mg/m3

100ppm

Red Iron Oxide 1309-37-1 0.0-10.0% NE NE

Naphtha 64742-95-6 2.0-10.0% 50ppm 50ppm

H

Formular

Carbon Black 1333-86-4 0.0-5.0% NE NE

Potential Health Hazards:

Irritation of eyes. Do not wear contact lenses when using this material.

Skin, Inhalation and Eyes Acute:

Irritation of skin.

Skin Absorption Acute:

Prolonged or repeated contact can cause dermatitis, defatting, blistering, allergic response, severe skin irritation, severe skin burns. Possible sensitization to skin.

Skin Absorption Chronic:

Irritation of respiratory tract. Prolonged inhalation may lead to mucus membrane irritation, fatigue, drowsiness, dizziness and or light headedness, headache, uncoordination, nausea, vomiting, diarrhea, abdominal pain, chest pain, blurred vision, coughing, numbness, difficulty with speech and apathy.

Inhalation Acute:

Prolonged inhalation may cause nervous system depression, intoxication, metallic taste, anesthetic effect or narcosis, difficulty of breathing, bronchitis, fever, chills, dehydration, tremors, liver damage, kidney damage, pulmonary edema, pneumoconiosis, loss of consciousness, respiratory failure, asphyxiation and death.

Inhalation Chronic:

Ingestion may cause lung inflammation and damage due to aspiration of material into lungs, mouth and throat irritation.

May cause difficulty breathing, loss of consciousness, dizziness and or lightheadedness.

Ingestion Acute:

Ingestion may cause mucous membrane irritation, drowsiness, headache, uncoordination, nausea, vomiting, diarrhea, gastrointestinal disturbance, severe abdominal pain, visual disturbance, apathy, central nervous system depression, anesthetic effect or narcosis, burns of the mouth, throat and stomach, liver and kidney damage, pulmonary edema, convulsions, respiratory failure and death.

Ingestion Chronic:

Primary Routes of Entry:

Inhalation, skin contact, eye contact, ingestion.

Skin, Inhalation and Eyes Chronic:

Prolonged or repeated contact can cause conjunctivitis, blurred vision, tearing of eyes, redness, severe eye irritation and or burns and corneal damage.

3. Hazard Identification

Skin:

Flush from skin with water. Then wash thoroughly with soap and water. Remove contaminated clothing. Wash contaminated clothing before reusing. Dispose of contaminated leather items such as shoes and belts. If irritation occurs consult a physician.

Eyes:

Flush eyes immediately. with large amounts of water, especially under the eye lid for at least 15 minutes. If irritation or other effects persist obtain medical treatment.

Inhalation:

Remove to fresh air. Restore and support continued breathing.Get emergency medical attention. Have trained person give oxygen if necessary. Get medical help for any breathing difficulty. Remove to fresh air if inhalation causes eye watering, headaches, dizziness or other discomfort.

Ingestion:

If swallowed, obtain medical treatment immediately.

Medical Conditions Generally Aggravated by Exposure:

Eye, skin, respiratory disorders, asthma-like conditions, kidney disorders and respiratory disorders.

Ventilation:

Provide dilution ventilation or local exhaust to prevent buildup of vapors. Use explosion proof equipment.

Skin Protection:

Wear impervious gloves, impervious clothing, face shield and apron. Wear chemical resistant coveralls and shoe coverings.

Eye Protection:

Wear solvent resistant safety goggles or glasses with a face shield and splash guard.

Note to Physician:

Eye, skin, respiratory disorders, asthma-like conditions, kidney disorders and respiratory disorders.

4. First Aid Measures

5. Control Measures and Personal Protection

Respiratory Protection:

Control environmental concentrations below applicable exposure standards when using this material. When respiratory protection is determined to be necessary, use a NIOSH/MSHA approved elastomeric sealing-surface face piece respirator outfitted with organic vapor cartridges and paint spray (dust/mist) prefilters. Determine the proper level of protection by conducting appropriate air monitoring.

Additional Recommendations:

Use eye wash and safety shower if present. Use only with adequate ventilation. Do not take internally. Keep out of reach of children. Avoid contact with eyes, skin and breathing of vapors. Wash hands thoroughly after handling especially before eating or smoking. Avoid conditions which result in formation of inhalable particles such as spraying or abrading, sanding painted surfaces.

Special Firefighting Precautions/Instructions:

Water may be sued to cool and protect exposed containers. Firefighters should use full protective clothing, eye protection and self-contained breathing apparatus.

6. Fire and Explosion Information

7. Physical and Chemical Properties

Extinguishing Media:

Dry chemical or foam water fog. Carbon dioxide. Closed containers may explode when exposed to extreme heat or fire.

Unusual Fire and Explosion Hazards:

Contains carbon monoxide, carbon dioxide, oxides of nitrogen, acrid fumes, oxygen, aldehydes, toxic gases, toluene diisocyanate, smoke and soot, unidentified organic compounds. Vapors are heavier than air and may travel long distances to a source of ignition and flash back. Vapors can form explosive mixtures in air at elevated temperatures. Closed containers may burst if exposed to extreme heat or fire. May decompose under fire conditions emitting irritant and or toxic gases.

Flammable Properties:

1000F (380C) Flash Point

SETAFlash Point Method

Viscous LiquidAppearance

SolventOdor

Specific Gravity

NoSolubility

240-3400FBoiling Point

Heavier than air. Vapor Density

Slower than Butyl Acetate. Evaporation Rate

1000F (380C)Flash Point

SETAFlash Point Method. . .

12. Accidental Release Measures

11. Ecological Data

10. Toxicological Data

9. Handling and Storage

8. Stability and Reactivity

Stable under normal storage conditions. Stability

Heat, open flame,arc or sparks.Water moisture,amines under controlled conditions,high temp.Conditions to Avoid . .

Strong oxidizers, acids and alkalies. Water.

Incompatibilities

By fire, burning or welding: CO, CO2, NOx, Aldehydes, toxic gases or fumes.

Will not occur under normal conditions. Hazardous Polymerization

Hazardous Decomposition Products. .

Store below 100F(38C). Keep away from heat, speaks, and open flame. Keep away from direct sunlight, heat and all sources of ignition. Keep container tightly closed in a well ventilated area.

Keep container tightly closed and upright when not in use. Empty containers may contain hazardous residues. Ground equipment when transferring to prevent accumulation of static charge.

No additional information provided for this product. See Section 2 for chemical specific data.

See section 2.

Comply with all applicable health and environmental regulations. Eliminate all sources of ignition.

Ventilate area. Spills may be collected with absorbent materials. Evacuate all unnecessary personnel. Place collected material in proper container. Wet down spilled material with water.

Complete personal protective equipment must be used during cleanup. Large spills-shut off leak if safe to do so. Dike and contain spill. Pump to storage or salvage container.

ALWAYS WEAR RECOMMENDED PERSONAL PROTECTIVE EQUIPMENT!

In Case of Spill or Other Release:

We believe the recommendations and technical information contained herein to be accurate. However, they are given without warranty or guarantee, expressed or implied, and we assume no responsibility for losses or damages, direct or indirect, as a result of their use. Customers/Users of this product must comply with all applicable health and safety laws, regulations and orders.

Note: All persons using the product mentioned in this data sheet for any purposes other than that specifically recommended in the technical data sheet does so at their own risk. It is the responsibility of the user to take all the necessary steps to comply with their local and state legislation. Advice given about our products is correct to the best of our knowledge. ePaint Company has no control over the quality or condition of the substrate being coated.

There are many factors affecting the use and application of all ePaint products. ePaint Company accepts no liability for the performance of the product or for any loss or damage arising out of the use of our products. It is the responsibility of the user to verify that this data sheet and all relating material is current prior to using any ePaint product.

16. Disclaimer

15. Regulatory Information

N/AEPA Registration Number :

Regulatory Data in this section is not intended to be all inclusive, only selected regulations are represented.

SARA TITLE III SECTION 313 CHEMICALS (listed if applicable):

Xyelen Methyl amyl ketone Carbon Black Iron Oxide Red

14. Transportation Information

DOT/Domestic Ground Transportation/AIR:

CONSUMER COMMODITYProper Ship Name. . .

3DOT Haz. Class . . .

UN1263DOT ID#

Packing Group

Flammable LiquidLabel Required

III

UPS GROUND:

Proper Ship Name. . .

ORM-DLabel Required

PAINT

13. Disposal Consideration

Dispose of in accordance with all local, state, and federal regulations.