Attachment B.2_PPQ Design Experience.docx

DOCX document 28 KB Posted

Attached to
NAVFAC Northwest 8(a) Small Business Multiple Award Construction Contract (MACC) Regional Contract
Solicitation number
N44255-21-R-2001
Issued by

About this file

This document contains a federal contract solicitation and a past performance questionnaire. The solicitation is for an Indefinite Delivery/Indefinite Quantity (IDIQ) Multiple Award Construction Contract (MACC) to provide new construction, renovation, alteration, demolition and repair work by design-build or design-bid-build methods for facilities located primarily within the Naval Facilities Engineering Systems Command (NAVFAC) Northwest area of responsibility, including Washington, Oregon, Idaho, Montana, Alaska, Iowa, Minnesota, North Dakota, South Dakota, Nebraska, and Wyoming. Most work will occur in Washington state but projects could be located anywhere in the United States, such as administrative and industrial facilities, housing, child care centers, lodges, recreation facilities, warehouses, and commercial and institutional buildings. This is a 100% set-aside for 8(a) small businesses located in SBA Region X of Alaska, Idaho, Oregon and Washington pursuant to a 2013 SBA-DoD partnership agreement. The NAICS code is 236220 with an annual size standard of $39.5 million. The construction contract specifies net 14 days for payment. The past performance questionnaire is a form for clients to evaluate and submit feedback on a contractor's previous work.

View the file

Other files

File Type Posted
8a MACC Amend 0007_6.15.22.pdf PDF
8a MACC Amend 0006_6.6.22.pdf PDF
Attach M PPI responses.pdf PDF
N4425521R2001_0005_SF30.pdf PDF
AMEND 0004 5.23.22.pdf PDF
Attachment M - Phase One PPI Responses 5.23.22.pdf PDF
Attachment O_Pre-Prop Conference Attendees.pdf PDF
Attachment N_PreProposal Conf Slides.pdf PDF
Amend 0003.pdf PDF
N4425521R2001_Amend 0002_5.10.22.pdf PDF
Attachment M_Phase One Govt PPI Responses.pdf PDF
Attachment E_Financial Questionnaire.docx DOCX document
Attachment B.1_PPQ Construction Experience.docx DOCX document
Attachment D_Surety Form.docx DOCX document
Attachment J_Self-Perform Cert and Notification of Subcontracting.doc DOC document
Attachment F_ PPI Form.doc DOC document
N4425521R2001_Amendment 0001.pdf PDF
Attachment C_Bid Schedule.docx DOCX document
Attachment L_Task Order Editable Clauses and Provisions.docx DOCX document
Attachment A_Construction and Design Experience Form.docx DOCX document
N4425521R2001_NAVFAC NW 8a MACC_RFP_5.4.22.pdf PDF
Attachment K_Post Award Limitation on Subcontracting Certif.doc DOC document
Attachment G_ PIEE Vendor Access Instructions.pdf PDF
Attachment B.1_PPQ Construction Experience.docx DOCX document
Attachment B.2_PPQ Design Experience.docx DOCX document
Attachment F_ PPI Form.doc DOC document
Attachment D_and_E_Surety and Financial Questionnaire Form.docx DOCX document
Show all 27

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Attachment B.2 PPQ for Design Experience

NAVFAC PAST PERFORMANCE QUESTIONNAIRE (Form PPQ) – Lead Design Firm

CONTRACT INFORMATION (Contractor to complete Blocks 1-4)

1. Contractor Information:

Firm Name:
Address:

DUNS:

Phone Number:
Point of Contact:Contact Phone Number:

2. Work Performed as: |_| Prime Contractor |_| Sub Contractor |_| Joint Venture |_| Other (Explain)

Percent of project work performed:

If subcontractor, who was prime (Name/Phone #):

3. Contract Information

Contract Number:

Delivery/Task Order Number (if applicable):

Title:
Location:
Award Date (mm/dd/yy):
Completion Date (mm/dd/yy):
Award Amount:
Final Price:

4. Project Description:

CLIENT INFORMATION (Client to complete Blocks 5-8)

5. Client Information

Name:
Organization/Title:
Phone Number:
Email Address:

6. Describe the client’s role in the project:

7. Date Questionnaire was completed:

NOTE: NAVFAC REQUESTS THAT THE CLIENT COMPLETES THIS QUESTIONNAIRE AND SUBMITS DIRECTLY BACK TO THE OFFEROR. THE OFFEROR WILL SUBMIT THE COMPLETED QUESTIONNAIRE TO NAVFAC WITH THEIR PROPOSAL, AND MAY DUPLICATE THIS QUESTIONNAIRE FOR FUTURE SUBMISSION ON NAVFAC SOLICITATIONS. CLIENTS ARE HIGHLY ENCOURAGED TO SUBMIT QUESTIONNAIRES DIRECTLY TO THE OFFEROR. HOWEVER, QUESTIONNAIRES MAY BE SUBMITTED DIRECTLY TO NAVFAC. PLEASE CONTACT THE OFFEROR FOR NAVFAC POC INFORMATION. THE GOVERNMENT RESERVES THE RIGHT TO VERIFY ANY AND ALL INFORMATION ON THIS FORM.

TO BE COMPLETED BY CLIENT

ADJECTIVE RATINGS AND DEFINITIONS TO BE USED TO BEST REFLECT

YOUR EVALUATION OF THE CONTRACTOR’S PERFORMANCE

RATING DEFINITION NOTE

(E) Exceptional
Performance meets contractual requirements and exceeds many to the Government/Owner’s benefit. The contractual performance of the element or sub-element being assessed was accomplished with few minor problems for which corrective actions taken by the contractor was highly effective.
An Exceptional rating is appropriate when the Contractor successfully performed multiple significant events that were of benefit to the Government/Owner. A singular benefit, however, could be of such magnitude that it alone constitutes an Exceptional rating. Also, there should have been NO significant weaknesses identified.
(VG) Very Good
Performance meets contractual requirements and exceeds some to the Government’s/Owner’s benefit. The contractual performance of the element or sub-element being assessed was accomplished with some minor problems for which corrective actions taken by the contractor were effective.
A Very Good rating is appropriate when the Contractor successfully performed a significant event that was a benefit to the Government/Owner. There should have been no significant weaknesses identified.
(S) Satisfactory
Performance meets minimum contractual requirements. The contractual performance of the element or sub-element contains some minor problems for which corrective actions taken by the contractor appear or were satisfactory.
A Satisfactory rating is appropriate when there were only minor problems, or major problems that the contractor recovered from without impact to the contract. There should have been NO significant weaknesses identified. Per DOD policy, a fundamental principle of assigning ratings is that contractors will not be assessed a rating lower than Satisfactory solely for not performing beyond the requirements of the contract.
(M) Marginal
Performance does not meet some contractual requirements. The contractual performance of the element or sub-element being assessed reflects a serious problem for which the contractor has not yet identified corrective actions. The contractor's proposed actions appear only marginally effective or were not fully implemented.
A Marginal is appropriate when a significant event occurred that the contractor had trouble overcoming which impacted the Government/Owner.
(U) Unsatisfactory
Performance does not meet most contractual requirements and recovery is not likely in a timely manner. The contractual performance of the element or sub-element contains serious problem(s) for which the contractor's corrective actions appear or were ineffective.
An Unsatisfactory rating is appropriate when multiple significant events occurred that the contractor had trouble overcoming and which impacted the Government/Owner. A singular problem, however, could be of such serious magnitude that it alone constitutes an unsatisfactory rating.
(N) Not Applicable
No information or did not apply to your contract
Rating will be neither positive nor negative.

Rev Apr 2017 2

SOURCE SELECTION SENSITIVE INFORMATION

DISCLOSURE LIMITATIONS AS OUTLINED IN FAR 2.101 & 3.104 APPLY

PLEASE MARK THE ADJECTIVE RATING WHICH BEST REFLECTS

YOUR EVALUATION OF THE CONTRACTOR’S PERFORMANCE.

E
V
S
M
U
N
1. Ability to meet quality standards specified for technical performance.
|_|
|_|
|_|
|_|
|_|
|_|
2. Compliance with contractual terms and conditions.
|_|
|_|
|_|
|_|
|_|
|_|
3. Compliance with contract design delivery/completion schedules including any significant intermediate milestones.
|_|
|_|
|_|
|_|
|_|
|_|
4. Quality/integrity of technical data/report preparation efforts.
|_|
|_|
|_|
|_|
|_|
|_|
5. Adequacy/effectiveness of quality control program and adherence to contract quality assurance requirements.
|_|
|_|
|_|
|_|
|_|
|_|
6. Design documents (plans and specifications) accurate and coordinated.
|_|
|_|
|_|
|_|
|_|
|_|
7. Plans clear and detailed sufficiently.
|_|
|_|
|_|
|_|
|_|
|_|
8. Suitability of design.
|_|
|_|
|_|
|_|
|_|
|_|
9. Effectiveness of overall contract management (including ability to effectively lead, manage and control the program).
|_|
|_|
|_|
|_|
|_|
|_|
10. Effectiveness of management of design subconsultants?
|_|
|_|
|_|
|_|
|_|
|_|
11. Designer was reasonable and cooperative in dealing with your staff (including the ability to successfully resolve disagreements/disputes; responsiveness to administrative reports).
|_|
|_|
|_|
|_|
|_|
|_|
12. Timeliness/effectiveness of contract problem resolution without extensive customer guidance.
|_|
|_|
|_|
|_|
|_|
|_|
13. Ability to successfully respond to emergency and/or surge situations.
|_|
|_|
|_|
|_|
|_|
|_|

14. Designer incorporated innovative alternative methods/processes that reduced cost, improved maintainability or other factors that benefited the client.

|_|
|_|
|_|
|_|
|_|
|_|
15. Ability to hire/apply a qualified workforce to this effort.
|_|
|_|
|_|
|_|
|_|
|_|
16. Ability to retain a qualified workforce on this effort
|_|
|_|
|_|
|_|
|_|
|_|
17. If this is/was a Government contract, has/was this contract been partially or completely terminated for default or convenience or are there any pending terminations? Indicate if show cause or cure notices were issued, or any default action in comment section below.
|_| Yes|_| No
18. Have there been any indications that the designer has had any financial problem? If yes, please explain below.
|_| Yes|_| No
19. In summary, provide an overall rating for the work performed by this contractor.
|_|
|_|
|_|
|_|
|_|
|_|

Any additional comments related to the contractor’s performance:

Client’s Signature:

File details come from the government source that posted it. Updated .