J-1502000-07-01 thru 02.pdf

This document contains technical design specifications and construction details for military range facilities and signage, specifically lateral limit signs and range firing lane markers.

Attachment J-1502000-07-1 provides detailed design specifications for lateral limit signs used to mark range boundaries. The signs are constructed from ¾" x 4' x 8' sheets of treated plywood with diagonal black and gray striping patterns, mounted on 4' x 4' x 12' treated posts installed in 4' deep augered holes then compacted. Three ¾" multi-purpose screws are placed at 6" on center to secure the sign face. Each sign assembly is positioned 4' from ground level to the base of the sign. Two lateral limit signs (left and right) are shown in the design drawings, which are noted as not to scale.

Attachment J-1502000-07-2 specifies range firing lane markers that vary based on distance requirements. For ranges up to 300 meters, markers measure 2 feet wide by 2 feet high with numerals displayed in contrasting colors—black numerals on white backgrounds for odd-numbered lanes and white numerals on black backgrounds for even-numbered lanes. Beyond 300 meters, markers are enlarged to 4 feet wide by 3-4 feet high to maintain visibility. The document references FM 25-7 standards and indicates these markers are locally manufactured. The distribution of these attachments is restricted to Department of Defense (DoW) community only.