Attachment A - 1689103_Design Revision 01_SPECS.pdf

SECTION 08 71 00

DOOR HARDWARE

02/16, CHG 4: 02/22

PART 1 GENERAL

1.1 REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.

ASTM INTERNATIONAL (ASTM)

ASTM E283 (2019) Standard Test Method for

Determining the Rate of Air Leakage

Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure

Differences Across the Specimen

BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)

ANSI/BHMA A156.1 (2021) Butts and Hinges

ANSI/BHMA A156.2 (2017) Bored and Preassembled Locks and

Latches

ANSI/BHMA A156.3 (2020) Exit Devices

ANSI/BHMA A156.4 (2013) Door Controls - Closers

ANSI/BHMA A156.5 (2020) Cylinder and Input Devices for Locks

ANSI/BHMA A156.6 (2021) Architectural Door Trim

ANSI/BHMA A156.7 (2016) Template Hinge Dimensions

ANSI/BHMA A156.8 (2021) Door Controls - Overhead Stops and

Holders

ANSI/BHMA A156.10 (2017) Power Operated Pedestrian Doors

ANSI/BHMA A156.13 (2017) Mortise Locks & Latches Series 1000

ANSI/BHMA A156.16 (2018) Auxiliary Hardware

ANSI/BHMA A156.17 (2019) Self Closing Hinges & Pivots

ANSI/BHMA A156.18 (2020) Materials and Finishes

ANSI/BHMA A156.21 (2019) Thresholds

ANSI/BHMA A156.22 (2021) Gasketing

ANSI/BHMA A156.24 (2012) Delayed Egress Locking Systems

ANSI/BHMA A156.25 (2013) Electrified Locking Devices

ANSI/BHMA A156.26 (2012) Continuous Hinges

ANSI/BHMA A156.29 (2012) Exit Locks, Exit Alarms, Alarms for

Exit Devices

ANSI/BHMA A156.30 (2014) High Security Cylinders

ANSI/BHMA A156.31 (2013) Electric Strikes and Frame Mounted

Actuators

ANSI/BHMA A156.36 (2010) Auxiliary Locks

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

NFPA 70 (2023) National Electrical Code

NFPA 72 (2022; ERTA 22-1) National Fire Alarm and

Signaling Code

NFPA 80 (2022) Standard for Fire Doors and Other

Opening Protectives

NFPA 101 (2021; TIA 21-1) Life Safety Code

NFPA 252 (2022) Standard Methods of Fire Tests of

Door Assemblies

STEEL DOOR INSTITUTE (SDI/DOOR)

SDI/DOOR A250.8 (2017) Specifications for Standard Steel

Doors and Frames

U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)

36 CFR 1191 Americans with Disabilities Act (ADA)

Accessibility Guidelines for Buildings and

Facilities; Architectural Barriers Act

(ABA) Accessibility Guidelines

UNDERWRITERS LABORATORIES (UL)

UL Bld Mat Dir (updated continuously online) Building

Materials Directory

1.2 SUBMITTALS

Government approval is required for submittals with a "G" or "S" classification. Submittals not having a "G" or "S" classification are for

Contractor Quality Control approval. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:

SD-02 Shop Drawings

Manufacturer's Detail Drawings; G

Verification of Existing Conditions; G

Hardware Schedule; G

Keying System; G

SD-03 Product Data

Hardware Items; G

SD-08 Manufacturer's Instructions

Installation

SD-10 Operation and Maintenance Data

Hardware Schedule Items, Data Package 1; G

SD-11 Closeout Submittals

Key Bitting

1.3 SHOP DRAWINGS

Submit manufacturer's detail drawings indicating all hardware assembly components and interface with adjacent construction. Indicate power components and wiring coordination for electrified hardware. Base shop drawings on verified field measurements and include verification of existing conditions.

1.4 PRODUCT DATA

Indicate fire-ratings at applicable components. Provide documentation of

ABA/ADA accessibility compliance of applicable components, as required by

36 CFR 1191 Appendix D - Technical.

1.5 HARDWARE SCHEDULE

Provide Hardware Item List and Hardware Schedule containing the following information, and additional information as needed to identify the complete make up of each hardware set and its application to each opening:

1.5.1 Hardware Item List:

a. Hardware Type

b. Item Number

c. Quantity

d. Size(s)

e. Reference Publication / Type Number

f. Manufacturer's Name / Catalog Number

g. Key Control Symbols

h. UL Mark (If fire rated and listed)

i. BHMA Finish(es)

j. Remarks

1.5.2 Hardware Schedule

a. Hardware Set Number

b. Opening Number(s)

c. Opening Description (single/double leaf, hand, size, door/frame material)

d. Fire Rating

e. Sound Rating

f. Hardware Items

g. Quantity

h. Size

i. BHMA Finish

j. Remarks

In addition, submit hardware schedule data package 1 in accordance with

Section 01 78 23 OPERATION AND MAINTENANCE DATA.

1.6 KEY BITTING CHART REQUIREMENTS

1.6.1 Requirements

Submit key bitting charts to the Contracting Officer prior to completion of the work. Include:

a. Complete listing of all keys (e.g. AA1 and AA2).

b. Complete listing of all key cuts (AA1-123456, AA2-123458).

c. Tabulation showing which key fits which door.

d. Copy of floor plan showing doors and door numbers.

e. Listing of 20 percent more key cuts than are presently required in each master system.

1.7 QUALITY ASSURANCE

1.7.1 Hardware Manufacturers and Modifications

Provide, as far as feasible, locks, hinges, and closers of one lock, hinge, or closer manufacturer's make. Modify hardware as necessary to provide features indicated or specified.

1.7.2 Key Shop Drawings Coordination Meeting

Prior to the submission of the key shop drawing, the Contracting Officer, Contractor, Door Hardware Subcontractor, using Activity and Base Locksmith must meet to discuss and coordinate key requirements for the facility.

1.8 DELIVERY, STORAGE, AND HANDLING

Deliver hardware in original individual containers, complete with necessary appurtenances including fasteners and instructions. Mark each individual container with item number as shown on hardware schedule. Deliver permanent keys and removable cores to the Contracting Officer directly.

Deliver construction master keys with the locks.

PART 2 PRODUCTS

2.1 TEMPLATE HARDWARE

Hardware applied to metal or to prefinished doors must be manufactured using a template. Provide templates to door and frame manufacturers in accordance with ANSI/BHMA A156.7 for template hinges. Coordinate hardware items to prevent interference with other hardware.

2.2 HARDWARE FOR FIRE DOORS AND EXIT DOORS

Provide all hardware necessary to meet the requirements of NFPA 72 for door alarms, NFPA 80 for fire doors, NFPA 101 for exit doors, NFPA 252 for fire tests of door assemblies, ABA/ADA accessibility requirements, and all other requirements indicated, even if such hardware is not specifically mentioned in paragraph HARDWARE SCHEDULE. Provide Underwriters

Laboratories, Inc. labels for such hardware in accordance with

UL Bld Mat Dir or equivalent labels in accordance with another testing laboratory approved in writing by the Contracting Officer.

2.3 HARDWARE ITEMS

Clearly and permanently mark with the manufacturer's name or trademark, hinges, pivots, locks, latches, exit devices, bolts and closers where the identifying mark is visible after the item is installed. For closers with covers, the name or trademark may be beneath the cover. Coordinate electrified door hardware components with corresponding components specified in Division 28 ELECTRONIC SECURITY SYSTEMS (ESS).

2.3.1 Hinges

Provide in accordance with ANSI/BHMA A156.1. Provide hinges that are 4-1/2 by 4-1/2 inch unless otherwise indicated. Construct loose pin hinges for interior doors and reverse-bevel exterior doors so that pins are non-removable when door is closed. Other anti-friction bearing hinges may be provided in lieu of ball bearing hinges.

2.3.2 Continuous Hinges

Where continuous hinges are required, provide in accordance with

ANSI/BHMA A156.26.

2.3.3 Spring Hinges

Provide in accordance with ANSI/BHMA A156.17.

2.3.4 Locks and Latches

a. At exterior locations provide locksets of full stainless steel type 302 or 304 construction including fronts, strike, escutcheons, knobs, bolts and all interior working parts. Marine Grade I, fully non-ferrous.

b. In non-air-conditioned interior environments or humid interior environments, provide interior locksets on the same Marine Grade I, fully non-ferrous as exterior locksets.

2.3.4.1 Mortise Locks and Latches

Provide in accordance with ANSI/BHMA A156.13, Series 1000, Operational

Grade 1, Security Grade 2. Provide mortise locks with escutcheons not less than 7 by 2-1/4 inch with a bushing at least 1/4 inch long. Cut escutcheons to fit cylinders and provide trim items with straight, beveled, or smoothly rounded sides, corners, and edges. Provide knobs and roses of mortise locks with screwless shanks and no exposed screws.

2.3.4.2 Bored Locks and Latches

Provide in accordance with ANSI/BHMA A156.2, Series 4000, Grade 1.

2.3.4.3 Auxiliary Locks

Provide in accordance with ANSI/BHMA A156.36, Grade 1.

2.3.5 Exit Devices

Provide in accordance with ANSI/BHMA A156.3, Grade 1. Provide adjustable strikes for rim type and vertical rod devices. Provide open back strikes for pairs of doors with mortise and vertical rod devices. Provide touch bars in lieu of conventional crossbars and arms. Provide escutcheons not less than 7 by 2-1/4 inch.

Use stainless steel or bronze base metal with plated finishes. Also include stainless steel fasteners and screws.

2.3.6 Exit Locks With Alarm

Provide in accordance with ANSI/BHMA A156.3 and ANSI/BHMA A156.29, Type

E0431 (with full width horizontal actuating bar) for single doors, unless otherwise specified. Provide terminals for connection to remote indicating panel. Provide outside control key unless otherwise specified. Provide door alarms integrated with the fire alarm system in accordance with NFPA 72.

2.3.7 Cylinders and Cores

Provide cylinders for new locks, including locks provided under other sections of this specification. Provide fully compatible cylinders with products from the Best Lock Corporation with interchangeable cores that are removable by a special control key. Factory set the cores with seven pin tumblers using the A4 system and F keyway. Submit a core code sheet with the cores. Provide master keyed cores in one system for this project.

Provide construction interchangeable cores.

2.3.7.1 High Security Cylinders

Provide in accordance with ANSI/BHMA A156.30, security level A for all high security cylinder components.

2.3.8 Push Button Mechanisms

Provide in accordance with ANSI/BHMA A156.5, Grade 1.

2.3.9 Electrified Hardware

Comply with the requirements of NFPA 70 for wiring of electrified hardware.

2.3.9.1 Electric Strikes and Frame Mounted Actuators

Provide in accordance with ANSI/BHMA A156.31, Grade 1. Provide electric strikes and actuators as required to meet operational requirements.

Provide electric strikes that remain secure during power failure. Provide a separate power supply for electric strikes, other locking devices and ancillary parts. Provide battery backup for continued operation during power failure. Provide strikes and actuators with a minimum opening force of 2300 pounds.

Provide facility interface devices that use direct current (dc) power to energize the solenoids. Provide electric strikes and actuators that incorporate end-of-line resistors to facilitate line supervision by the system. If not incorporated into the electric strike or local controller, provide metal oxide resistors (MOVs) to protect the controller from reverse current surges.

2.3.9.1.1 Solenoid

Provide actuating solenoid for strikes and actuators that are rated for continuous duty, cannot dissipate more than 12 Watts and must operate on 12 or 24 Volts dc. Inrush current cannot exceed 1 ampere and the holding current cannot be greater than 500 milliamperes. Actuating solenoid must move from fully secure to fully open positions in less than 500 milliseconds.

2.3.9.1.2 Signal Switches

Provide strikes and actuators with signal switches to indicate to the system when the bolt is not engaged or the strike mechanism is unlocked.

Signal switches must report a forced entry to the system.

2.3.9.1.3 Tamper Resistance

Provide strike guards that prevent tampering with the latch bolt of the locking hardware or the latch bolt keeper of the electric strike. Strike guards to bolt through the door using tamper resistant screws. Provide strike guards made of 1/8 inch thick brass and that are 11-1/14 inch high by

1-5/8 inch wide, with a minimum 5/32 inch wide offset.

2.3.9.1.4 Coordination

Provide electric strikes and actuators of a size, weight and profile compatible with each specified door frame. Field verify installation clearances prior to procurement.

2.3.9.1.5 Mounting Method

Provide electric strikes and actuators suitable for use with single and double doors, with mortise or rim type hardware specified, and for right or left hand mounting as specified. In double door installations, locate the lock in the active leaf and monitor the fixed leaf.

2.3.9.2 Electrified Mortise Locks

Provide in accordance with ANSI/BHMA A156.25, Grade 1. Provide electrified mortise locks that remain secure during power failure. Provide facility interface devices that use dc power to energize solenoids. Provide solenoids, resisters, and signal switches in accordance with paragraph

ELECTRIC STRIKES AND FRAME MOUNTED ACTUATORS.

2.3.9.2.1 Power Transfer Hinges

Provide power transfer hinges with each electrified lock that route power and monitoring signals from the lockset to the door frame. Coordinate power transfer hinges with door frames.

2.3.9.3 Card Readers and Keypad Access Control Hardware

Provide in accordance with ANSI/BHMA A156.5 and ANSI/BHMA A156.25, Grade 1 components. Provide devices that are tamper alarmed, tamper and vandal resistant, solid state, and do not contain electronics which could compromise the access control subsystem should the subsystem be attacked.

Provide surface, semi-flush, pedestal, or weatherproof mountable devices as specified for each individual location. Provide proximity type card readers capable of reading Smart Card type access control cards. Provide keypads that contain an integral 12-digit tactile keyboard with digits arranged in numerical order. Provide keypads that are integrated into the card reader. Coordinate access control hardware with corresponding devices and systems specified in Division 28 ELECTRONIC SECURITY SYSTEMS (ESS).

2.3.9.4 Power Operated Pedestrian Door Hardware

Provide in accordance with ANSI/BHMA A156.10, Grade 1.

2.3.9.5 Delayed Egress Locking System

Provide in accordance with ANSI/BHMA A156.24, Grade 1.

2.3.10 Keying System

Provide a grand master keying system with an extension of the existing keying system. Existing locks were manufactured by the Best Lock

Corporation and have interchangeable cores.

2.3.11 Lock Trim

Provide cast, forged, or heavy wrought construction and commercial plain design for lock trim.

2.3.11.1 Knobs and Roses

Provide in accordance with ANSI/BHMA A156.2 and ANSI/BHMA A156.13 for knobs, roses, and escutcheons. For unreinforced knobs, roses, and escutcheons, provide a 0.050 inch thickness. For reinforced knobs, roses, and escutcheons, provide an outer shell thickness of 0.035 inch and a combined total thickness of 0.070 inch, except at knob shanks. Provide knob shanks 0.060 inch thick.

2.3.11.2 Lever Handles

Provide lever handles. Provide in accordance with ANSI/BHMA A156.3 for mortise locks of lever handles for exit devices. Provide lever handle locks with a breakaway feature (such as a weakened spindle or a shear key) to prevent irreparable damage to the lock when force in excess of that specified in ANSI/BHMA A156.13 is applied to the lever handle. Provide lever handles return to within 1/2 inch of the door face.

2.3.12 Keys

Furnish one file key, one duplicate key, and one working key for each key change . Furnish one additional working key for each lock of each keyed-alike group.Furnish a quantity of key blanks equal to 20 percent of the total number of file keys. Stamp each key with appropriate key control symbol and "U.S. property - do not duplicate." Do not place room number on keys.

2.3.13 Door Bolts

Provide in accordance with ANSI/BHMA A156.16. Provide dustproof strikes for bottom bolts, except at doors having metal thresholds. Provide automatic latching flush bolts in accordance with ANSI/BHMA A156.3, Type 25.

2.3.14 Closers

Provide in accordance with ANSI/BHMA A156.4, Series C02000, Grade 1, with

PT 4C. Provide with brackets, arms, mounting devices, fasteners, full size metal covers, except at storefront mounting, and other features necessary for the particular application. Size closers in accordance with manufacturer's printed recommendations, or provide multi-size closers, Sizes 1 through 6, and list sizes in the Hardware Schedule. Provide manufacturer's 10 year warranty.

Use stainless steel inside bracketed or door mounted closers on exterior doors. Non-ferrous closers, such as aluminum or cast bronze, are permissible where door utilization is minimal. On interior doors use closers of 302 or 304 stainless steel or non-ferrous materials. On surface-mounted closers use or apply rust inhibiting finish on all ferrous parts. Also apply this finish on concealed closers.

2.3.14.1 Identification Marking

Engrave each closer with manufacturer's name or trademark, date of manufacture, and manufacturer's size designation in locations that will be visible after installation.

2.3.15 Overhead Holders

Provide in accordance with ANSI/BHMA A156.8.

2.3.16 Door Protection Plates

Provide in accordance with ANSI/BHMA A156.6.

2.3.16.1 Sizes of Armor, Mop, and Kick Plates

2 inch less than door width for single doors. Provide 10 inch kick plates for flush doors. Provide a minimum 36 inch armor plates for flush doors , except 16 inch high armor plates on fire doors. Provide 6 inch mop plates.

2.3.17 Door Stops and Silencers

Provide in accordance with ANSI/BHMA A156.16. Silencers Type L03011.

Provide three silencers for each single door, two for each pair.

2.3.18 Thresholds

Provide in accordance with ANSI/BHMA A156.21. Use J35100, with vinyl or silicone rubber insert in face of stop, for exterior doors opening out, unless specified otherwise.

2.3.19 Weatherstripping Gasketing

Provide in accordance with ANSI/BHMA A156.22. Provide the type and function designation where specified in paragraph HARDWARE SCHEDULE.

Provide a set to include head and jamb seals, and sweep strips. Air leakage of weatherstripped doors not to exceed 1.25 cubic feet per minute of air per square foot of door area when tested in accordance with ASTM E283.

Provide weatherstripping with one of the following:

2.3.19.1 Extruded Aluminum Retainers

Extruded aluminum retainers not less than 0.050 inch wall thickness with vinyl, neoprene, silicone rubber, or polyurethane inserts. Provide bronze anodized aluminum.

2.3.19.2 Interlocking Type

Zinc or bronze not less than 0.018 inch thick.

2.3.19.3 Spring Tension Type

Spring bronze or stainless steel not less than 0.008 inch thick.

2.3.20 Soundproofing Gasketing

Provide in accordance with ANSI/BHMA A156.22. Provide adjustable doorstops at heads,jambs and automatic door bottoms in accordance with the hardware set, of extruded aluminum, bronze anodized, surface applied, with vinyl fin seals between plunger and housing. Provide doorstops with solid neoprene tube, silicone rubber, or closed cell sponge gasket. Provide door bottoms with adjustable operating rod and silicone rubber or closed cell sponge neoprene gasket. Provide doorstops that are mitered at corners. Provide type and function designation where specified in paragraph HARDWARE SETS.

2.3.21 Rain Drips

Provide in accordance with ANSI/BHMA A156.22. Provide extruded aluminum rain drips, not less than 0.08 inch thick, bronze anodized or factory painted finish. Provide the manufacturer's full range of color choices to the Contracting Officer for color selection. Set drips in sealant and fasten with stainless steel screws.

2.3.21.1 Door Rain Drips

Approximately 1-1/2 inch high by 5/8 inch projection. Align bottom with bottom edge of door.

2.3.21.2 Overhead Rain Drips

Approximately 1-1/2 inch high by 2-1/2 inch projection. Align bottom with door frame rabbet.

2.3.22 Auxiliary Hardware (Other than locks)

Provide in accordance with ANSI/BHMA A156.16, Grade 1.

2.3.23 Special Tools

Provide special tools, such as spanner and socket wrenches and dogging keys, as required to service and adjust hardware items.

2.4 FASTENERS

Provide fasteners of type, quality, size, and quantity appropriate to the specific application. Fastener finish to match hardware. Provide stainless steel or nonferrous metal fasteners in locations exposed to weather. Verify metals in contact with one another are compatible and will avoid galvanic corrosion when exposed to weather.

2.5 FINISHES

Provide in accordance with ANSI/BHMA A156.18. Provide hardware in BHMA 630 finish (satin stainless steel), unless specified otherwise. Provide items not manufactured in stainless steel in BHMA 626 finish (satin chromium plated) over brass or bronze, except prime coat finish for surface door closers, and except BHMA 652 finish (satin chromium plated) for steel hinges. Provide hinges for exterior doors in stainless steel with BHMA 630 finish or chromium plated brass or bronze with BHMA 626 finish. Furnish exit devices in BHMA 626 finish in lieu of BHMA 630 finish except where

BHMA 630 is specified under paragraph HARDWARE SETS. Match exposed parts of concealed closers to lock and door trim. Match hardware finish for aluminum doors to the doors.

PART 3 EXECUTION

3.1 INSTALLATION

Provide hardware in accordance with manufacturers' printed installation instructions. Fasten hardware to wood surfaces with full-threaded wood screws or sheet metal screws. Provide machine screws set in expansion shields for fastening hardware to solid concrete and masonry surfaces.

Provide toggle bolts where required for fastening to hollow core construction. Provide through bolts where necessary for satisfactory installation.

3.1.1 Weatherstripping Installation

Provide full contact, weathertight seals that allow operation of doors without binding the weatherstripping.

3.1.1.1 Stop Applied Weatherstripping

Fasten in place with color matched sheet metal screws not more than 9 inch on center after doors and frames have been finish painted.

3.1.1.2 Interlocking Type Weatherstripping

Provide interlocking, self adjusting type on heads and jambs and flexible hook type at sills. Nail weatherstripping to door 1 inch on center and to heads and jambs at 4 inch on center.

3.1.1.3 Spring Tension Type Weatherstripping

Provide spring tension type on heads and jambs. Provide bronze nails with bronze. Provide stainless steel nails with stainless steel. Space nails not more than 1-1/2 inch on center.

3.1.2 Soundproofing Installation

Provide as specified for stop applied weatherstripping. Fasten in place with color matched sheet metal screws not more than 9 inch on center after doors and frames have been finish painted.

3.1.3 Threshold Installation

Extend thresholds the full width of the opening and notch end for jamb stops. Set thresholds in a full bed of sealant and anchor to floor with cadmium-plated, countersunk, steel screws in expansion sleeves. For aluminum thresholds placed on top of concrete surfaces, coat the underside surfaces that are in contact with the concrete with fluid applied waterproofing as a separation measure prior to placement.

3.2 FIRE DOORS AND EXIT DOORS

Provide hardware in accordance with NFPA 72 for door alarms, NFPA 80 for fire doors, NFPA 101 for exit doors, and NFPA 252 for fire tests of door assemblies.

3.3 HARDWARE LOCATIONS

Provide in accordance with SDI/DOOR A250.8, unless indicated or specified otherwise.

a. Kick and Armor Plates: Push side of single-acting doors. Both sides of double-acting doors.

b. Mop Plates: Bottom flush with bottom of door.

3.4 FIELD QUALITY CONTROL

After installation, protect hardware from paint, stains, blemishes, and other damage until acceptance of work. Submit notice of testing 15 days before scheduled, so that testing can be witnessed by the Contracting

Officer. Adjust hinges, locks, latches, bolts, holders, closers, and other items to operate properly. Demonstrate that permanent keys operate respective locks, and give keys to the Contracting Officer. Correct, repair, and finish, errors in cutting and fitting and damage to adjoining work.

3.5 HARDWARE SETS

Provide hardware for all doors under this section. Deliver Hardware templates and hardware, except field applied hardware, to the door and frame manufacturer for use in fabricating doors and frames.

Hardware Set No. 1

Doors #: 100.1

Description: Exterior - Single - Vestibule - Keyed/Unarmed

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Continuous Hinge A51021B 630 BHMA

1 Mortised Exit Device Type 10

(F08)

630 Misc

1 Overhead Parallel Closer (Push Side) C02021 689 BHMA

1 Kickplate - 34" x 10" (Push Side) J102 630 BHMA

1 Threshold 2006T 628 Pemko

1 Sound Seal 103N 628 NGP

1 Automatic Door Bottom 434 RL 689 Pemko

1 Rain Drip ROY976 BHMA

1 Door Sweep with Integral Drip ROY536 BHMA

Operation: Doors are normally closed and unlocked.

Hardware Set No. 2

Doors #: 100.2

Description: Interior - Single - Vestibule - Secure Access

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Continuous Hinge A51021B 630 BHMA

1 Lockset - Less Strike - Panic Bar with CDX-10 Combination Lock

LKM10K

PX10S2

626 Misc

1 Electronic Strike E09321 630 BHMA

1 Overhead Parallel Closer (Push Side) C02021 689 BHMA

1 Kickplate - 34" x 10" (Push Side) J102 630 BHMA

1 Threshold 273A 628 Pemko

1 Sound Seal 103N 628 NGP

1 Automatic Door Bottom 434 PKL 689 Pemko

1 Request to exit (REX) motion sensor By Security Contractor

1 Arm/Disarm Device Keypad By Security Contractor

1 Balanced Magnetic Switch By Security Contractor

1 Card Reader By Security Contractor

1 Power Supply By Security Contractor

Operation: Door is normally closed and locked. Entry is by card reader validation which retracts lock for entry. Door relocks when closed. Lock is fail secure and remains locked upon loss of power.

Request to exit (REX) in lever shunts alarm for free egress at all times. Combination lock is used after normal hours. Activation of building fire alarm system, building automatic sprinkler or fire detection system must automatically unlock door.

Hardware Set No. 3

Doors #: 101

Description: Interior - Single - Secure Access

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges NRP A5112 630 BHMA

1 Lockset - Less Strike - Panic Bar with CDX-10 Combination Lock

LKM10K

PX10S2

626 Misc

1 Electronic Strike E09321 630 BHMA

1 Overhead Parallel Closer (Push

Side)

C02021 689 BHMA

1 Kickplate - 34" x 10" (Push Side) J102 630 BHMA

1 Wall Stop L02101 630 BHMA

1 Threshold 1855T 628 Pemko

1 Sound Seal 103N 628 NGP

1 Automatic Door Bottom 434 RL 689 Pemko

1 Request to exit (REX) motion sensor By Security Contractor

1 Arm/Disarm Device Keypad By Security Contractor

1 Balanced Magnetic Switch By Security Contractor

1 Card Reader By Security Contractor

1 Power Supply By Security Contractor

Operation: Door is normally closed and locked. Entry is by card reader validation which retracts lock for entry. Door relocks when closed. Lock is fail secure and remains locked upon loss of power.

Request to exit (REX) in lever shunts alarm for free egress at all times. Combination lock is used after normal hours. Activation of building fire alarm system, building automatic sprinkler or fire detection system must automatically unlock door.

Hardware Set No. 4

Doors #: 101A

Description: Interior - Single - Office

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges NRP A5111 630 BHMA

1 Mortised Lockset - Office Lock F04 630 BHMA

1 Electronic Strike E09321 630 BHMA

1 Overhead Parallel Closer with Hold

Open (Pull Side)

C02061 689 BHMA

1 Kickplate - 34" x 10" (Push Side) J102 630 BHMA

1 Wall Stop - Concave L02251 630 BHMA

1 Threshold 173A 689 Pemko

1 Sound Seal 103N 628 NGP

1 Automatic Door Bottom 434 RL 689 Pemko

1 Card Reader By Security Contractor

Operation: Door is normally closed and locked. Entry is by card reader validation which retracts lock for entry. Door relocks when closed. Lock is fail secure and remains locked upon loss of power.

Activiation of building fire alarm system, building automatic sprinkler or fire detection system must automatically unlock door(s).

Hardware Set No. 5

Doors #: 101B

Description: Interior - Single - Electrical

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges A5111 630 BHMA

1 Mortised Lockset - Storeroom F07 630 BHMA

1 Overhead Parallel Closer with Hold

Open (Push Side)

C02061 689 BHMA

1 Threshold 173A 689 Pemko

Hardware Set No. 5

Doors #: 101B

Description: Interior - Single - Electrical

Provide each door with the following:

3 Door Silencers L03011 BHMA

Hardware Set No. 6

Doors #: 102.2

Description: Exterior - Single - Emergency Exit Alarmed

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Continuous Hinge A51021B 630 BHMA

1 Rim Exit Device - Alarmed with Red

Screenprinted PushPad

Type 1

E0431

630 BHMA

1 Overhead Parallel Closer (Push

Side)

C02021 689 BHMA

1 Kickplate - 34" x 10" (Push Side) J102 630 BHMA

1 Threshold 2001T 628 Pemko

1 Sound Seal 103N 628 NGP

1 Automatic Door Bottom 434 PKL 689 Pemko

1 Rain Drip ROY976 BHMA

1 Door Sweep with Integral Drip ROY536 BHMA

1 Balanced Magnetic Switch By Security Contractor

Operation: Door is normally closed and locked; EMERGENCY EXIT ONLY.

Manual egress at all times by pressing rail of Rim exit device and exiting. Pressing rail of exit device will sound alarm. Alarm armed, disarmed and reset by cylinder in exit device rail.

Hardware Set No. 7

Doors #: 102A

Description: Interior - Single - Office

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

Hardware Set No. 7

Doors #: 102A

Description: Interior - Single - Office

Provide each door with the following:

3 Hinges A5111 630 BHMA

1 Mortised Lockset - Office Lock F04 630 BHMA

1 Overhead Parallel Closer with Hold

Open (Pull Side)

C02061 689 BHMA

1 Kickplate (Push Side) J102 630 BHMA

1 Wall Stop - Concave L02251 630 BHMA

1 Automatic Door Bottom 434 RL 689 Pemko

1 Threshold 173A 689 Pemko

1 Sound Seal 103N 628 NGP

Hardware Set No. 8

Doors #: 104A

Description: Interior - Single - Storage

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges A5111 630 BHMA

1 Mortised Lockset - Storeroom F07 630 BHMA

1 Overhead Parallel Closer with Hold

Open (Pull Side)

C02061 689 BHMA

1 Wall Stop L02101 630 BHMA

1 Threshold 173A 689 Pemko

3 Door Silencers L03011 BHMA

Hardware Set No. 9

Doors #: 105

Description: Interior - Single - Conference

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges A5111 630 BHMA

1 Mortised Lockset - Office Lock F04 630 BHMA

1 Overhead Parallel Closer with Hold

Open (Pull Side)

C02061 689 BHMA

1 Kickplate (Push Side) J102 630 BHMA

1 Wall Stop - Concave L02251 630 BHMA

1 Automatic Door Bottom 434 RL 689 Pemko

1 Threshold 173A 689 Pemko

1 Sound Seal 103N 628 NGP

Hardware Set No. 10

Doors #: 108

Description: Interior - Single - Restroom

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges A5111 630 BHMA

1 Privacy Lock - Occupied / Vacant

Indicator

MA301

(F02)

630 BHMA

1 Overhead Parallel Closer (Pull

Side)

C02021 689 BHMA

1 Mop Plate (Pull Side) J103 630 BHMA

1 Coat Hook L03111 626 BHMA

1 Wall Stop - Concave L02251 630 BHMA

3 Door Silencers L03011 BHMA

1 Door Holder - Lever Type (Push

Side)

L01381 626 BHMA

Hardware Set No. 11

Doors #: 109

Description: Interior - Single - Digital Lab

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges NRP A5112 630 BHMA

1 Mortised Lockset - Office Lock F04 630 BHMA

1 Lockset - CDX-10 Combination Lock PX10S2 626 Misc

1 Electronic Strike E09371 630 BHMA

1 Overhead Parallel Closer (Pull

Side)

C02021 689 BHMA

1 Kickplate - 34" x 10" (Push Side) J102 630 BHMA

1 Wall Stop - Concave L02251 630 BHMA

1 Threshold 253A 628 Pemko

3 Door Silencers L03011 BHMA

1 Request to exit (REX) motion sensor By Security Contractor

1 Balanced Magnetic Switch By Security Contractor

1 Card Reader By Security Contractor

1 Power Supply By Security Contractor

Operation: Door is normally closed and locked. Entry is by card reader validation which retracts lock for entry. Door relocks when closed. Lock is fail secure and remains locked upon loss of power.

Combination lock is used after normal hours. Activiation of building fire alarm system, building automatic sprinkler or fire detection system must automatically unlock door.

Hardware Set No. 12

Doors #: 110

Description: Interior - Single - Restroom

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges A5111 630 BHMA

Hardware Set No. 12

Doors #: 110

Description: Interior - Single - Restroom

Provide each door with the following:

1 Privacy Lock - Occupied / Vacant

Indicator

MA301

(F02)

630 BHMA

1 Overhead Parallel Closer (Pull

Side)

C02021 689 BHMA

1 Mop Plate (Pull Side) J103 630 BHMA

1 Coat Hook L03111 626 BHMA

1 Wall Stop - Concave L02251 630 BHMA

3 Door Silencers L03011 BHMA

1 Door Holder - Lever Type (Push Side) L01381 626 BHMA

Hardware Set No. 13

Doors #: 111

Description: Interior - Single - Interview

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges NRP A5112 630 BHMA

1 Mortised Lockset - Intruder Latch

Bolt

F32 630 BHMA

1 Overhead Parallel Closer (Pull

Side)

C02021 689 BHMA

1 Kickplate - 34" x 10" (Push Side) J102 630 BHMA

1 Wall Stop - Concave L02251 630 BHMA

1 Threshold 253A 628 Pemko

1 Sound Seal 103N 628 NGP

1 Automatic Door Bottom 434 RL 689 Pemko

Hardware Set No. 13

Doors #: 111

Description: Interior - Single - Interview

Provide each door with the following:

3 Door Silencers L03011 BHMA

Hardware Set No. 14

Doors #: 114

Description: Interior - Single - Forensic Consult

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges A5111 630 BHMA

1 Mechanical Pushbutton Combo Lockset with key override - Best SFIC 7 pin

8148 Lever 626 BHMA

1 Cylinder Core Type Req'd Best

1 Overhead Parallel Closer with Hold

Open (Pull Side)

C02061 689 BHMA

1 Kickplate (Push Side) J102 630 BHMA

1 Wall Stop - Concave L02251 630 BHMA

1 Automatic Door Bottom 434 RL 689 Pemko

1 Threshold 253A 689 Pemko

1 Sound Seal 103N 628 NGP

Hardware Set No. 15

Doors #: 115

Description: Interior - Single - Vault/Forensics

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

Hardware Set No. 15

Doors #: 115

Description: Interior - Single - Vault/Forensics

Provide each door with the following:

3 Hinges A5112 630 BHMA

1 Mortised Exit Device Type 10

(F08)

630 BHMA

1 Mechanical Pushbutton Combo

Lockset with key override - Best

SFIC 7 pin

8148 Lever 626 BHMA

1 Cylinder Core Type Req'd Best

1 Overhead Parallel Closer (Push

Side)

C02021 689 BHMA

1 Kickplate (Push Side) J102 630 BHMA

1 Wall Stop L02101 630 BHMA

1 Automatic Door Bottom 434 RL 689 Pemko

1 Threshold 1855T 628 Pemko

1 Sound Seal 103N 628 NGP

Hardware Set No. 16

Doors #: 116

Description: Exterior - Single - Emergency Exit Unarmed

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Continuous Hinge A51021B 630 BHMA

1 Mortised Exit Device Type 10

(F08)

630 BHMA

1 Overhead Parallel Closer (Push

Side)

C02021 689 BHMA

1 Kickplate - 34" x 10" (Push Side) J102 630 BHMA

1 Threshold 2006T 628 Pemko

1 Sound Seal 103N 628 NGP

Hardware Set No. 16

Doors #: 116

Description: Exterior - Single - Emergency Exit Unarmed

Provide each door with the following:

1 Automatic Door Bottom 434 PKL 689 Pemko

1 Rain Drip ROY976 BHMA

1 Door Sweep with Integral Drip ROY536 BHMA

1 Balanced Magnetic Switch By Security Contractor

Operation: Door is normally closed and locked; EMERGENCY EXIT ONLY.

Manual egress at all times by pressing rail of exit device and exiting.

Hardware Set No. 17

Doors #: 117

Description: Interior - Single - Janitors Closet

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

3 Hinges A5111 630 BHMA

1 Mortised Lockset - Storeroom F07 630 BHMA

1 Overhead Parallel Closer with Hold

Open (Push Side)

C02061 689 BHMA

2 Mop Plate (Each Side) J103 630 BHMA

3 Door Silencers L03011 BHMA

Hardware Set No. 18

Doors #: 104

Description: Existing Interior - Single - Admin Storage

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Bored Lockset - Storeroom F86 630 BHMA

Notes: Remove and replace existing lockset. All other existing door hardware to remain.

Hardware Set No. 19

Doors #: 106.1

Description: Existing Interior - Single - Storage

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Bored Lockset - Storeroom F86 630 BHMA

Notes: Remove and replace existing lockset. All other existing door hardware to remain.

Hardware Set No. 20

Doors #: 106.2

Description: Existing Interior - Single - Server/Storage

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Bored Lockset - Storeroom F86 630 BHMA

Notes: Remove and replace existing lockset. All other existing door hardware to remain.

Hardware Set No. 21

Doors #: 113.1

Description: Existing Interior - Single - Garage

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Mechanical Pushbutton Combo Lockset with key override - Best SFIC 7 pin

8148 Lever 626 Simplex

1 Cylinder Core Type Req'd 630 Best

Notes: Remove and replace existing lockset. Modify existing door for mortise cut-out as required. All other existing door hardware to remain.

Hardware Set No. 22

Doors #: 113.2

Description: Existing Interior - Double - Vault/Forensics

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Bored Lockset - Entry (active leaf) F82 630 BHMA

Notes: Remove and replace existing lockset at active leaf. All other existing door hardware to remain.

Hardware Set No. 23

Doors #: 113.3

Description: Existing Coiling OH Door - Garage

Provide each door with the following:

Qty Description Catalog

Number

Finish Mfr

1 Central Roller Shutter Lockset

Notes: Modify existing door and frame as required to install shutter lockset. All other existing door hardware to remain.

-- End of Section --