REV1_11DEC2025_Specification-N4008426Q1003-Mandatory Characteristics.pdf

ATTACHMENT 1:

SPECIFICATION - MANDATORY CHARACTERISTICS For Each Item Being Purchased Under this Solicitation.

Deviations from the minimum mandatory requirements specified in Attachment 1: Specification – Mandatory Characteristics are NOT allowed for each item being purchased under this solicitation and will be determined nonresponsive and not eligible for award.

ITEM 0001, AERIAL PLATFORM

GENERAL DESCRIPTION

Aerial platform, self-propelled, wheel mounted, diesel engine driven, telescopic boom type, operator controls on platform, minimum 249 kg platform capacity. Offerors Proposed Vehicle for Item 0001 meets the General Description provided. YES NO

All equipment shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0001 will be the newest model and year at the time of delivery and ready for use. YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR

AGREES: YES NO

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity One (1) each. E/C 5460-60 OFFEROR AGREES: YES NO

(2) Minimum Dimensions (Metric) OFFEROR’S PROPOSED

DIMENSIONS &

OPERATING RANGE

(* To be inserted by offeror) Millimeter

Overall Length 10,010 *______________ " Width 2,400 *______________ " Height 2,000 * ______________

Maximum Working Height: Minimum 20 meter _______________Meters Maximum Working Radius: Minimum 17.4 meter ______________Meters

(3) Exterior Color: Manufacturer's standard color. OFFEROR AGREES: YES NO

(4) Identification Markings and Registration Numbers. Reflectorized tape or paint dark blue color. United States Navy Registration Numbers 54-10194 is applied. The contractor shall install or paint both sides and rear of body.

Lettering to include "U. S. NAVY" in 3 inch letters (minimum) on the top, seven-digit USN number for vehicle(s) in 7-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 3inch letters (minimum) centered the bottom of USN number. OFFEROR AGREES: YES NO

(5) Rustproofing and Undercoating: Manufacturer's standard. OFFEROR AGREES: YES NO

(6) Electrical Systems: Manufacturer's standard. OFFEROR AGREES: YES NO

(7) Engine Displacement: Manufacturer’s standard. OFFEROR AGREES: YES NO

(8) Lifting Eye: Shall be installed on necessary portion. OFFEROR AGREES: YES NO

(9) Head Lights: Shall be installed on body. OFFEROR AGREES: YES NO

(10) Working Lights: Shall be installed on platform. OFFEROR AGREES: YES NO

(11) Protection Boots for Hydraulic: Shall be installed on cylinders upper and lower. OFFEROR

AGREES: YES NO

(12): Bucket Control Panel: Shall be installed protection clear cover and both in Japanese and in English indicators for control levers and switches. OFFEROR AGREES: YES NO

(13) Safety Devices: Manufacturer's standard. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories NOTE: Shall be type installed on manufacturer's standard production model.

(2) Operation and Maintenance:

a. Operation: The contractor shall be provide demonstration, how to operate safely at the U.S.

Government facility in Yokosuka, Japan at no additional cost at the time of delivery. Also, provide a Q&A section. OFFEROR AGREES: YES NO

b. Maintenance: The U.S. Government will ask the contractor about the maintenance of the equipment in Japanese, so please provide the best answers at the U.S. Government facility in Yokosuka, Japan, at no additional cost at the time of delivery. OFFEROR AGREES: YES NO

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 50-kilometer radius of the delivery point. Warranty service must be provided in the following area. OFFEROR AGREES: YES NO

a. For Yokosuka area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *_________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

(4) Technical Publications (in Japanese CD or CD ROM is acceptable One (1) set of technical (shop repair) manuals and part catalogs. One (1) set of operator manual in English and Japanese for each equipment and to be furnished for each consignee by the Contractor at time of vehicle(s) delivery.

OFFEROR AGREES: YES NO

DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location. All transportation charges borne by the contractor to the NAVFACFE, Transportation, Yokosuka (P.O.C is Mr. Hamano masakazu.hamano.ln@us.navy.mil). OFFEROR AGREES: YES NO

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 600 calendar days after delivery order is issued. OFFEROR AGREES: YES NO

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified. OFFEROR AGREES: YES NO